libtool: install: (cd /home/buildroot/autobuild/instance-1/output-1/target/usr/lib && { ln -s -f liblzma.so.5.2.10 liblzma.so || { rm -f liblzma.so && ln -s liblzma.so.5.2.10 liblzma.so; }; }) libtool: install: /usr/bin/install -c .libs/liblzma.lai /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/liblzma.la libtool: install: /usr/bin/install -c .libs/liblzma.a /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/liblzma.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/liblzma.a libtool: install: /home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc-ranlib /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/liblzma.a libtool: warning: remember to run 'libtool --finish /usr/lib' make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/liblzma' make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/liblzma' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/liblzma' Making install in xzdec make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xzdec' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xzdec' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /bin/sh ../../libtool --mode=install /usr/bin/install -c xzdec lzmadec '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/install -c -m 644 xzdec.1 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /usr/bin/make install-data-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xzdec' languages= ; \ if test "no" = yes && test -d "../../po4a/man"; then \ languages=`ls "../../po4a/man"`; \ fi; \ target=`echo xzdec | sed 's&^&&'` && \ link=`echo lzmadec | sed 's&^&&'` && \ for lang in . $languages; do \ man="../../po4a/man/$lang/xzdec.1" ; \ if test -f "$man"; then \ /usr/bin/make dist_man_MANS="$man" man_MANS= \ mandir="/usr/share/man/$lang" install-man; \ fi; \ man1dir="/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/$lang/man1" && \ if test -f "$man1dir/$target.1"; then \ if test -n "lzmadec"; then ( \ cd "$man1dir" && \ rm -f "$link.1" && \ ln -s "$target.1" "$link.1" \ ); fi; \ fi; \ done make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xzdec' libtool: install: /usr/bin/install -c xzdec /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/xzdec libtool: install: /usr/bin/install -c lzmadec /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/lzmadec make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xzdec' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xzdec' Making install in xz make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xz' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xz' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /bin/sh ../../libtool --mode=install /usr/bin/install -c xz '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/install -c -m 644 xz.1 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /usr/bin/make install-data-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xz' languages= ; \ if test "no" = yes && test -d "../../po4a/man"; then \ languages=`ls "../../po4a/man"`; \ fi; \ target=`echo xz | sed 's&^&&'` && \ for lang in . $languages; do \ man="../../po4a/man/$lang/xz.1" ; \ if test -f "$man"; then \ /usr/bin/make dist_man_MANS="$man" man_MANS= \ mandir="/usr/share/man/$lang" install-man; \ fi; \ man1dir="/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/$lang/man1" && \ if test -f "$man1dir/$target.1"; then ( \ cd "$man1dir" && \ for name in unxz xzcat lzma unlzma lzcat; do \ link=`echo $name | sed 's&^&&'` && \ rm -f "$link.1" && \ ln -s "$target.1" "$link.1"; \ done \ ); fi; \ done libtool: install: /usr/bin/install -c xz /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/xz make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xz' /usr/bin/make install-exec-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xz' cd "/home/buildroot/autobuild/instance-1/output-1/target/usr/bin" && \ target=`echo xz | sed 's&^&&'` && \ for name in unxz xzcat lzma unlzma lzcat; do \ link=`echo $name | sed 's&^&&'` && \ rm -f "$link" && \ ln -s "$target" "$link"; \ done make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xz' make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xz' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/xz' Making install in lzmainfo make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/lzmainfo' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/lzmainfo' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /bin/sh ../../libtool --mode=install /usr/bin/install -c lzmainfo '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/install -c -m 644 lzmainfo.1 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' libtool: install: /usr/bin/install -c lzmainfo /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/lzmainfo make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/lzmainfo' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/lzmainfo' Making install in scripts make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/scripts' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/scripts' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /usr/bin/install -c xzdiff xzgrep xzmore xzless '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/install -c -m 644 xzdiff.1 xzgrep.1 xzmore.1 xzless.1 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /usr/bin/make install-exec-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/scripts' cd "/home/buildroot/autobuild/instance-1/output-1/target/usr/bin" && \ for pair in xzdiff-xzcmp xzgrep-xzegrep xzgrep-xzfgrep xzdiff-lzdiff xzdiff-lzcmp xzgrep-lzgrep xzgrep-lzegrep xzgrep-lzfgrep xzmore-lzmore xzless-lzless; do \ target=`echo $pair | sed 's/-.*$//' | sed 's&^&&'` && \ link=`echo $pair | sed 's/^.*-//' | sed 's&^&&'` && \ rm -f "$link" && \ ln -s "$target" "$link"; \ done /usr/bin/make install-data-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/scripts' languages= ; \ if test "no" = yes && test -d "../../po4a/man"; then \ languages=`ls "../../po4a/man"`; \ fi; \ for lang in $languages; do \ mans= ; \ for man in xzdiff.1 xzgrep.1 xzmore.1 xzless.1; do \ man="../../po4a/man/$lang/$man" ; \ if test -f "$man"; then \ mans="$mans $man"; \ fi; \ done; \ /usr/bin/make dist_man_MANS="$mans" man_MANS= \ mandir="/usr/share/man/$lang" install-man; \ done; \ for lang in . $languages; do \ for pair in xzdiff-xzcmp xzgrep-xzegrep xzgrep-xzfgrep xzdiff-lzdiff xzdiff-lzcmp xzgrep-lzgrep xzgrep-lzegrep xzgrep-lzfgrep xzmore-lzmore xzless-lzless; do \ target=`echo $pair | sed 's/-.*$//' \ | sed 's&^&&'` && \ link=`echo $pair | sed 's/^.*-//' \ | sed 's&^&&'` && \ man1dir="/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/$lang/man1" && \ if test -f "$man1dir/$target.1"; then ( \ cd "$man1dir" && \ rm -f "$link.1" && \ ln -s "$target.1" "$link.1" \ ); fi; \ done; \ done make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/scripts' make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/scripts' make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/scripts' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src/scripts' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/src' Making install in po make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/po' if test "xz" = "gettext-tools"; then \ /usr/bin/mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/po' Making install in tests make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/tests' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/tests' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10/tests' make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/xz-5.2.10' yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70-br1.tar.gz: OK (sha256: 108a0ceec862b56a3fbcb3ad28a8744d9800555ccb3e11bdd94c8cd4614296d5) >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/yavta/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70-br1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 -xf - >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Patching >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Configuring rm -rf /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build mkdir -p /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build sed -e "/^\[binaries\]$/s:$::" -e "/^\[properties\]$/s:$::" -e "s%@TARGET_CC@%/home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%cortex-a17%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/instance-1/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/instance-1/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/instance-1/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/instance-1/output-1/host/armeb-buildroot-linux-gnueabi/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/instance-1/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build/cross-compilation.conf PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" CC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" PYTHONNOUSERSITE=y /home/buildroot/autobuild/instance-1/output-1/host/bin/meson setup --prefix=/usr --libdir=lib --default-library=shared --buildtype=release --cross-file=/home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build/cross-compilation.conf -Db_pie=false -Dstrip=false -Dbuild.pkg_config_path=/home/buildroot/autobuild/instance-1/output-1/host/lib/pkgconfig -Dbuild.cmake_prefix_path=/home/buildroot/autobuild/instance-1/output-1/host/lib/cmake -Dwerror=false /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70/ /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build The Meson build system Version: 1.0.0 Source dir: /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Build dir: /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70/build Build type: cross build Project name: yavta Project version: 0.0.0 C compiler for the host machine: /home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc (gcc 11.3.0 "armeb-buildroot-linux-gnueabi-gcc.br_real (Buildroot 2023.02-282-gd89fdaea2b) 11.3.0") C linker for the host machine: /home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc ld.bfd 2.38 C compiler for the build machine: /usr/bin/gcc (gcc 12.2.1 "gcc (GCC) 12.2.1 20221121 (Red Hat 12.2.1-4)") C linker for the build machine: /usr/bin/gcc ld.bfd 2.38-26 Build machine cpu family: x86_64 Build machine cpu: x86_64 Host machine cpu family: arm Host machine cpu: cortex-a17 Target machine cpu family: arm Target machine cpu: cortex-a17 Checking for function "clock_gettime" : YES Build targets in project: 1 yavta 0.0.0 User defined options Cross files : /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build/cross-compilation.conf build.cmake_prefix_path: /home/buildroot/autobuild/instance-1/output-1/host/lib/cmake build.pkg_config_path : /home/buildroot/autobuild/instance-1/output-1/host/lib/pkgconfig buildtype : release default_library : shared libdir : lib prefix : /usr strip : false werror : false b_pie : false Found ninja-1.11.1.git.kitware.jobserver-1 at /home/buildroot/autobuild/instance-1/output-1/host/bin/ninja >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Building PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" PYTHONNOUSERSITE=y /home/buildroot/autobuild/instance-1/output-1/host/bin/ninja -C /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build ninja: Entering directory `/home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build' [1/2] Compiling C object yavta.p/yavta.c.o [2/2] Linking target yavta >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Installing to target PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" DESTDIR=/home/buildroot/autobuild/instance-1/output-1/target PYTHONNOUSERSITE=y /home/buildroot/autobuild/instance-1/output-1/host/bin/ninja -C /home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build install ninja: Entering directory `/home/buildroot/autobuild/instance-1/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build' [0/1] Installing files. Installing yavta to /home/buildroot/autobuild/instance-1/output-1/target/usr/bin >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/instance-1/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-O2', '-g0'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%cortex-a17%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/instance-1/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/instance-1/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/instance-1/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/instance-1/output-1/host/armeb-buildroot-linux-gnueabi/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/instance-1/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-gnueabi-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%cortex-a17%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%'-O2', '-g0'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/instance-1/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/instance-1/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/instance-1/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/instance-1/output-1/host/armeb-buildroot-linux-gnueabi/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/instance-1/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf grep -qsE '^/bin/bash$' /home/buildroot/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/bash" >> /home/buildroot/autobuild/instance-1/output-1/target/etc/shells mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-1/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-1/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-1/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root:"*":, /home/buildroot/autobuild/instance-1/output-1/target/etc/shadow grep -qsE '^/bin/sh$' /home/buildroot/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/sh" >> /home/buildroot/autobuild/instance-1/output-1/target/etc/shells ln -sf bash /home/buildroot/autobuild/instance-1/output-1/target/bin/sh /usr/bin/sed -i -e '/^root:/s,[^/]*$,bash,' /home/buildroot/autobuild/instance-1/output-1/target/etc/passwd if [ -x /home/buildroot/autobuild/instance-1/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/instance-1/output-1/target/sbin/swapoff ]; then /usr/bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/instance-1/output-1/target/etc/inittab; else /usr/bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/instance-1/output-1/target/etc/inittab; fi /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~sole::respawn:/sbin/getty -L console 57600 vt100 #~' /home/buildroot/autobuild/instance-1/output-1/target/etc/inittab /usr/bin/sed -i -e '/^[^#].*-o remount,rw \/$/s~^~#~' /home/buildroot/autobuild/instance-1/output-1/target/etc/inittab rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/include /home/buildroot/autobuild/instance-1/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-1/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-1/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/rpm /home/buildroot/autobuild/instance-1/output-1/target/usr/doc find /home/buildroot/autobuild/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-1/output-1/target/lib/ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-1/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/man /home/buildroot/autobuild/instance-1/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/info /home/buildroot/autobuild/instance-1/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/doc /home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-1/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/instance-1/output-1/target/lib/debug /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/debug find /home/buildroot/autobuild/instance-1/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/buildroot/autobuild/instance-1/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/buildroot/autobuild/instance-1/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-1/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2023.02-282-gd89fdaea2b"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2023.05-git"; \ echo "PRETTY_NAME=\"Buildroot 2023.05-git\"" \ ) > /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-1/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-1/output-1/per-package /home/buildroot/autobuild/instance-1/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/instance-1/output-1/target/usr >>> Generating root filesystems common tables rm -rf /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs mkdir -p /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs printf ' \n' >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/full_users_table.txt printf ' \n' > /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/full_devices_table.txt cat system/device_table.txt system/device_table_dev.txt >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/full_devices_table.txt printf ' \n' >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/full_devices_table.txt >>> Generating filesystem image rootfs.ext2 mkdir -p /home/buildroot/autobuild/instance-1/output-1/images rm -rf /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2 mkdir -p /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2 rsync -auH --exclude=/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM /home/buildroot/autobuild/instance-1/output-1/target/ /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target echo '#!/bin/sh' > /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot echo "set -e" >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot echo "chown -h -R 0:0 /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target" >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" /home/buildroot/autobuild/instance-1/buildroot/support/scripts/mkusers /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/full_users_table.txt /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot echo "/home/buildroot/autobuild/instance-1/output-1/host/bin/makedevs -d /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/full_devices_table.txt /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target" >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot printf ' rm -rf /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target/usr/lib/udev/hwdb.d/ /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target/etc/udev/hwdb.d/\n' >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot echo "find /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target/run/ -mindepth 1 -prune -print0 | xargs -0r rm -rf --" >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot echo "find /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target/tmp/ -mindepth 1 -prune -print0 | xargs -0r rm -rf --" >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot printf ' find /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target -print0 | xargs -0 -r touch -hd @1682362868\n' >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot printf ' \n' >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot printf ' rm -f /home/buildroot/autobuild/instance-1/output-1/images/rootfs.ext2\n /home/buildroot/autobuild/instance-1/output-1/host/sbin/mkfs.ext2 -d /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target -r 0 -N 0 -m 5 -L "rootfs" -I 256 -O ^64bit /home/buildroot/autobuild/instance-1/output-1/images/rootfs.ext2 "5G" || { ret=$?; echo "*** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE)" 1>&2; exit $ret; }\n' >> /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot chmod a+x /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" FAKEROOTDONTTRYCHOWN=1 /home/buildroot/autobuild/instance-1/output-1/host/bin/fakeroot -- /home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/fakeroot rootdir=/home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/ext2/target table='/home/buildroot/autobuild/instance-1/output-1/build/buildroot-fs/full_devices_table.txt' mke2fs 1.46.5 (30-Dec-2021) Creating regular file /home/buildroot/autobuild/instance-1/output-1/images/rootfs.ext2 Creating filesystem with 1310720 4k blocks and 327680 inodes Filesystem UUID: d7c90983-d91d-4c14-81f3-3a1078798ee0 Superblock backups stored on blocks: 32768, 65536, 98304, 131072, 163840, 196608, 229376, 262144, 294912, 327680, 360448, 393216, 425984, 458752, 491520, 524288, 557056, 589824, 622592, 655360, 688128, 720896, 753664, 786432, 819200, 851968, 884736, 917504, 950272, 983040, 1015808, 1048576, 1081344, 1114112, 1146880, 1179648, 1212416, 1245184, 1277952 Allocating group tables: 0/40 done Writing inode tables: 0/40 done Copying files into the device: done Writing superblocks and filesystem accounting information: 0/40 done PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" lz4 -l -9 -c /home/buildroot/autobuild/instance-1/output-1/images/rootfs.ext2 > /home/buildroot/autobuild/instance-1/output-1/images/rootfs.ext2.lz4 ln -snf /home/buildroot/autobuild/instance-1/output-1/host/armeb-buildroot-linux-gnueabi/sysroot /home/buildroot/autobuild/instance-1/output-1/staging make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-1/buildroot' >>> Buildroot 2023.02-282-gd89fdaea2b Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-buildroot Collecting legal info >>> host-fakedate Collecting legal info >>> host-skeleton Collecting legal info >>> host-gcc-final 11.3.0 Collecting legal info >>> glibc 2.37-2-g9f8513dc64119a424b312db97cef5d87d376defa Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) LICENSES: OK (sha256: b33d0bd9f685b46853548814893a6135e74430d12f6d94ab3eba42fc591f83bc) >>> host-bison 3.8.2 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-gawk 5.2.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-gcc-initial 11.3.0 Collecting legal info >>> host-binutils 2.38 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-gmp 6.2.1 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-mpc 1.2.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.1 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> linux-headers 6.1.14 Collecting legal info COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0) LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79) LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> bash 5.2.15 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> ncurses 6.3-20221224 Collecting legal info COPYING: OK (sha256: 63de87399e9fc8860236082b6b0520e068e9eb1fad0ebd30202aa30bb6f690ac) >>> host-ncurses 6.3-20221224 Collecting legal info COPYING: OK (sha256: 63de87399e9fc8860236082b6b0520e068e9eb1fad0ebd30202aa30bb6f690ac) >>> readline 8.2 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-autoconf 2.71 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> bitstream-vera 1.10 Collecting legal info COPYRIGHT.TXT: OK (sha256: 3361d054759a2fc686a2c058be82deaf9c2e6fe549be9004d7935a6c1736315d) >>> host-e2fsprogs 1.46.5 Collecting legal info NOTICE: OK (sha256: 5da5ef153e559c1d990d4c3eedbedd4442db892d37eae1f35fff069de8ec9020) lib/ss/mit-sipb-copyright.h: OK (sha256: 032989b508f1a72ebee5b3417e55d06d473f9ee203e45ab11864a7e49cdec63d) lib/et/internal.h: OK (sha256: 47182fe6631a32f271a15bbe210751b3825b7199f588879aac7d4804fc8b4b8f) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> host-util-linux 2.38 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.13 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> host-erofs-utils 1.5 Collecting legal info COPYING: OK (sha256: 0df042de29b44887355db86c79708a4489ce6e6666f6e33ad02040293f09e6a2) LICENSES/Apache-2.0: OK (sha256: a400f85dd06d230f1b308cde4290a53f345b6e320a376b7904b31c51c2fd4b1a) LICENSES/GPL-2.0: OK (sha256: feee3b3157dcdf78d4f50edefbd5dd7adf8b6d52c11bfaaa746a85a373256713) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-lz4 1.9.4 Collecting legal info lib/LICENSE: OK (sha256: 8b58c446121a109ccf32edc094bba3010a3d85e4ee3702950db55e4d3e87736c) programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> initscripts Collecting legal info >>> libart 2.3.21 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> libfastjson 0.99.9 Collecting legal info COPYING: OK (sha256: b29370bbfa98816e1fca0901f18149d920736771bfd68b4ee0eb00c78b38d245) >>> libgsm 1.0.19 Collecting legal info COPYRIGHT: OK (sha256: 81c68a3374937ed9b5e4929c709e81a2c4b35b5d1f450ecf8c473e2daea46ff6) >>> libogg 1.3.5 Collecting legal info COPYING: OK (sha256: d2ab5758336489da61c12cc5bb757da5339c4ae9001f9bb0562b4370249af814) >>> libtheora 1.1.1 Collecting legal info COPYING: OK (sha256: 8417fad7da775735564e209484a2e011e0fa201e94f01fdbee6e4977e478e6fc) LICENSE: OK (sha256: 654a0238f789f4435c4818f50005b141d013c5a09a31d861efc1d0d67ba975a4) >>> libvorbis 1.3.7 Collecting legal info COPYING: OK (sha256: ec1815db59fcd302846df949d7424876cb2e2dc5ed1606c5fb0b36787b1cf43a) >>> libubox d716ac4bc4236031d4c3cc1ed362b502e20e3787 Collecting legal info >>> host-cmake 3.22.3 Collecting legal info Copyright.txt: OK (sha256: f1a4326266aada65b307dac05161a9d02d3dba4fb08b50cb26e3c24cc8a86e97) >>> libvncserver 0.9.14 Collecting legal info COPYING: OK (sha256: 4d23c8c814e5baf007d854f01d8502e77dc56a41144934e003fb32c4e052d20f) >>> lzo 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> ltris 1.2 Collecting legal info COPYING: OK (sha256: 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34) >>> sdl 1.2.15 Collecting legal info COPYING: OK (sha256: bb117c0fbd7f57f64170b690285d7df07c2371b578e3b3cd3aa2e1155ef461a0) >>> lv2 1.18.10 Collecting legal info COPYING: OK (sha256: 1e6bb175e193608b767ff25a4ed68b82c4db599491cf0d2694435cf60e9a4841) >>> host-meson 1.0.0 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.11.1.g95dee.kitware.jobserver-1 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python-setuptools 65.6.3 Collecting legal info LICENSE: OK (sha256: db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8) >>> host-python3 3.11.2 Collecting legal info LICENSE: OK (sha256: 3b2f81fe21d181c499c59a256c8e1968455d6689d269aa85373bfb6af41da3bf) >>> host-autoconf-archive 2022.09.03 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-expat 2.5.0 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> host-libffi 3.4.4 Collecting legal info LICENSE: OK (sha256: 2c9c2acb9743e6b007b91350475308aee44691d96aa20eacef8e199988c8c388) >>> mbw 1.5 Collecting legal info mbw.spec: OK (sha256: 1afb2b8258506742238b9ceb8a865d7030c5889c56ba2911a0c0c042aa1335d1) >>> ngircd 26.1 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> odhcp6c 53f07e90b7f1da6977143a488dd5cb73a33b233b Collecting legal info COPYING: OK (sha256: e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4) >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pcre2 10.42 Collecting legal info LICENCE: OK (sha256: 87d884eceb7fc54611470ce9f74280d28612b0c877adfc767e9676892a638987) >>> serd 0.30.14 Collecting legal info COPYING: OK (sha256: 13b62d3705cabee6a21730eb24f773249271c2d95e9ecbab16069e729d4ae147) >>> sord 0.16.12 Collecting legal info COPYING: OK (sha256: e06562d6bcf0341b2ac2ad0f0ca36801d2ebf388d5ef297011625e4c36e963f0) >>> sratom 0.6.14 Collecting legal info COPYING: OK (sha256: 97742aacc982d8bb10d4450e3ce71dd02a9f26ba73a0eb822ef3356a74525597) >>> sslh 1.22c Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> sysvinit 2.99 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> tinyssh 20220801 Collecting legal info LICENCE: OK (sha256: b5dc19477e29f4111e1c16cd89ec0782f5a07b1a30e3bdb7c155425b81b12c46) >>> unzip 6.0 Collecting legal info LICENSE: OK (sha256: 7469b81d5d29ac4fd670f7c86ba0cb9fa34f137a2d4d5198437d92ddf918984b) >>> xz 5.2.10 Collecting legal info COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Collecting legal info COPYING.GPL: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-acl 2.3.1 Collecting legal info doc/COPYING: OK (sha256: a45a845012742796534f7e91fe623262ccfb99460a2bd04015bd28d66fba95b8) doc/COPYING.LGPL: OK (sha256: 01b1f9f2c8ee648a7a596a1abe8aa4ed7899b1c9e5551bda06da6e422b04aa55) >>> host-attr 2.5.1 Collecting legal info doc/COPYING: OK (sha256: 98f318493be6b08bff3cd295791cde06c54e17882a3c74a1ed245eaa02533d52) doc/COPYING.LGPL: OK (sha256: 5decad7e58d90d44335bf2f45ce27563bd911065c6a1a02dfa7647c4efee75c8) >>> host-fakeroot 1.30.1 Collecting legal info COPYING: OK (sha256: fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7) >>> host-makedevs Collecting legal info WARNING: the Buildroot source code has not been saved WARNING: gcc-final-11.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-11.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: libubox-d716ac4bc4236031d4c3cc1ed362b502e20e3787: cannot save license (LIBUBOX_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-1/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot'