>>> libmad 0.15.1b Downloading
wget --passive-ftp -nd -t 3 -O '/tmp/instance-14/output-1/build/.libmad_0.15.1b.orig.tar.gz.f1WArk/output' 'http://snapshot.debian.org/archive/debian/20190310T213528Z/pool/main/libm/libmad/libmad_0.15.1b.orig.tar.gz' 
URL transformed to HTTPS due to an HSTS policy
--2022-11-12 02:11:10--  https://snapshot.debian.org/archive/debian/20190310T213528Z/pool/main/libm/libmad/libmad_0.15.1b.orig.tar.gz
Resolving snapshot.debian.org (snapshot.debian.org)... 185.17.185.185, 193.62.202.27, 2001:630:206:4000:1a1a:0:c13e:ca1b, ...
Connecting to snapshot.debian.org (snapshot.debian.org)|185.17.185.185|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 502379 (491K)
Saving to: '/tmp/instance-14/output-1/build/.libmad_0.15.1b.orig.tar.gz.f1WArk/output'

     0K .......... .......... .......... .......... .......... 10%  249K 2s
    50K .......... .......... .......... .......... .......... 20%  521K 1s
   100K .......... .......... .......... .......... .......... 30%  726K 1s
   150K .......... .......... .......... .......... .......... 40% 1.09M 1s
   200K .......... .......... .......... .......... .......... 50% 1.33M 0s
   250K .......... .......... .......... .......... .......... 61% 1.52M 0s
   300K .......... .......... .......... .......... .......... 71% 1.81M 0s
   350K .......... .......... .......... .......... .......... 81% 1.66M 0s
   400K .......... .......... .......... .......... .......... 91% 2.53M 0s
   450K .......... .......... .......... ..........           100% 3.76M=0.6s

2022-11-12 02:11:11 (868 KB/s) - '/tmp/instance-14/output-1/build/.libmad_0.15.1b.orig.tar.gz.f1WArk/output' saved [502379/502379]

libmad_0.15.1b.orig.tar.gz: OK (sha256: bbfac3ed6bfbc2823d3775ebb931087371e142bb0e9bb1bee51a76a6e0078690)
wget --passive-ftp -nd -t 3 -O '/tmp/instance-14/output-1/build/.libmad_0.15.1b-10.diff.gz.qKGGdP/output' 'http://snapshot.debian.org/archive/debian/20190310T213528Z/pool/main/libm/libmad/libmad_0.15.1b-10.diff.gz' 
URL transformed to HTTPS due to an HSTS policy
--2022-11-12 02:11:11--  https://snapshot.debian.org/archive/debian/20190310T213528Z/pool/main/libm/libmad/libmad_0.15.1b-10.diff.gz
Resolving snapshot.debian.org (snapshot.debian.org)... 193.62.202.27, 185.17.185.185, 2001:1af8:4020:b030:deb::185, ...
Connecting to snapshot.debian.org (snapshot.debian.org)|193.62.202.27|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 18053 (18K)
Saving to: '/tmp/instance-14/output-1/build/.libmad_0.15.1b-10.diff.gz.qKGGdP/output'

     0K .......... .......                                    100% 2.37M=0.007s

2022-11-12 02:11:12 (2.37 MB/s) - '/tmp/instance-14/output-1/build/.libmad_0.15.1b-10.diff.gz.qKGGdP/output' saved [18053/18053]

libmad_0.15.1b-10.diff.gz: OK (sha256: dfeabd5d2398bf902660edc31f87ad40600f0aa732b946f864d8ee6bbf56a99c)
>>> libmad 0.15.1b Extracting
mkdir -p /tmp/instance-14/output-1/per-package/libmad/host
mkdir -p /tmp/instance-14/output-1/per-package/libmad/target
gzip -d -c /tmp/instance-14/dl/libmad/libmad_0.15.1b.orig.tar.gz | tar --strip-components=1 -C /tmp/instance-14/output-1/build/libmad-0.15.1b   -xf -
>>> libmad 0.15.1b Patching
PATH=/tmp/instance-14/output-1/per-package/libmad/host/bin:$PATH support/scripts/apply-patches.sh  /tmp/instance-14/output-1/build/libmad-0.15.1b /tmp/instance-14/dl/libmad libmad_0.15.1b-10.diff.gz

Applying libmad_0.15.1b-10.diff.gz using gzip: 
patching file debian/changelog
patching file debian/compat
patching file debian/control
patching file debian/copyright
patching file debian/libmad0-dev.dirs
patching file debian/libmad0-dev.docs
patching file debian/libmad0-dev.examples
patching file debian/libmad0-dev.files
patching file debian/libmad0-dev.install
patching file debian/libmad0.dirs
patching file debian/libmad0.docs
patching file debian/libmad0.files
patching file debian/libmad0.install
patching file debian/mad.pc
patching file debian/patches/Provide-Thumb-2-alternative-code-for-MAD_F_MLN.diff
patching file debian/patches/amd64-64bit.diff
patching file debian/patches/length-check.patch
patching file debian/patches/libmad.thumb.diff
patching file debian/patches/md_size.diff
patching file debian/patches/mips-gcc4.4.diff
patching file debian/patches/optimize.diff
patching file debian/patches/series
patching file debian/rules
patching file debian/upstream/signing-key.asc
patching file debian/watch

Applying 0001-mips-h-constraint-removal.patch using patch: 
patching file fixed.h
patching file mad.h

Applying 0002-configure-ac-automake-foreign.patch using patch: 
patching file configure.ac
if [ -d /tmp/instance-14/output-1/build/libmad-0.15.1b/debian/patches ]; then PATH=/tmp/instance-14/output-1/per-package/libmad/host/bin:$PATH support/scripts/apply-patches.sh  /tmp/instance-14/output-1/build/libmad-0.15.1b /tmp/instance-14/output-1/build/libmad-0.15.1b/debian/patches *.patch; fi

Applying optimize.diff using series: 
patching file configure.ac

Applying amd64-64bit.diff using series: 
patching file configure.ac

Applying Provide-Thumb-2-alternative-code-for-MAD_F_MLN.diff using series: 
patching file fixed.h

Applying libmad.thumb.diff using series: 
patching file imdct_l_arm.S

Applying mips-gcc4.4.diff using series: 
patching file fixed.h
Hunk #1 succeeded at 310 with fuzz 1 (offset 13 lines).

Applying md_size.diff using series: 
patching file layer3.c

Applying length-check.patch using series: 
patching file bit.c
patching file frame.c
patching file layer12.c
patching file layer3.c
>>> libmad 0.15.1b Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /tmp/instance-14/output-1/build/libmad-0.15.1b -name $file); do cp support/gnuconfig/$file $i; done; done
>>> libmad 0.15.1b Configuring
mkdir -p /tmp/instance-14/output-1/per-package/libmad/host
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/host-autoconf/host/ /tmp/instance-14/output-1/per-package/host-autoconf/host/ /tmp/instance-14/output-1/per-package/libmad/host
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/host-automake/host/ /tmp/instance-14/output-1/per-package/host-automake/host/ /tmp/instance-14/output-1/per-package/libmad/host
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/host-libtool/host/ /tmp/instance-14/output-1/per-package/host-libtool/host/ /tmp/instance-14/output-1/per-package/libmad/host
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/host-skeleton/host/ /tmp/instance-14/output-1/per-package/host-skeleton/host/ /tmp/instance-14/output-1/per-package/libmad/host
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/skeleton/host/ /tmp/instance-14/output-1/per-package/skeleton/host/ /tmp/instance-14/output-1/per-package/libmad/host
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/toolchain/host/ /tmp/instance-14/output-1/per-package/toolchain/host/ /tmp/instance-14/output-1/per-package/libmad/host
mkdir -p /tmp/instance-14/output-1/per-package/libmad/target
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/host-autoconf/target/ /tmp/instance-14/output-1/per-package/host-autoconf/target/ /tmp/instance-14/output-1/per-package/libmad/target
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/host-automake/target/ /tmp/instance-14/output-1/per-package/host-automake/target/ /tmp/instance-14/output-1/per-package/libmad/target
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/host-libtool/target/ /tmp/instance-14/output-1/per-package/host-libtool/target/ /tmp/instance-14/output-1/per-package/libmad/target
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/host-skeleton/target/ /tmp/instance-14/output-1/per-package/host-skeleton/target/ /tmp/instance-14/output-1/per-package/libmad/target
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/skeleton/target/ /tmp/instance-14/output-1/per-package/skeleton/target/ /tmp/instance-14/output-1/per-package/libmad/target
rsync -a --link-dest=/tmp/instance-14/output-1/per-package/toolchain/target/ /tmp/instance-14/output-1/per-package/toolchain/target/ /tmp/instance-14/output-1/per-package/libmad/target
>>> libmad 0.15.1b Autoreconfiguring
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:31: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:31: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:9794: AM_CONFIG_HEADER is expanded from...
configure.ac:31: the top level
configure.ac:65: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
configure.ac:65: You should run autoupdate.
aclocal.m4:121: AC_PROG_LIBTOOL is expanded from...
configure.ac:65: the top level
configure.ac:143: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:143: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:143: the top level
configure.ac:174: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:174: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:174: the top level
configure.ac:186: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:186: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:186: the top level
configure.ac:211: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:211: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:211: the top level
configure.ac:254: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:254: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:254: the top level
configure.ac:265: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:265: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:265: the top level
configure.ac:291: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:291: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:291: the top level
configure.ac:306: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:306: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:306: the top level
configure.ac:316: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:316: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:316: the top level
configure.ac:318: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:318: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:318: the top level
configure.ac:346: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:346: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:346: the top level
configure.ac:39: installing './compile'
configure.ac:29: installing './missing'
Makefile.am:57: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Makefile.am: installing './depcomp'
>>> libmad 0.15.1b Patching libtool
patching file /tmp/instance-14/output-1/build/libmad-0.15.1b/ltmain.sh
Hunk #1 succeeded at 2694 (offset 7 lines).
Hunk #2 succeeded at 4284 (offset 7 lines).
Hunk #3 succeeded at 6579 (offset 25 lines).
Hunk #4 succeeded at 6589 (offset 25 lines).
Hunk #5 succeeded at 6882 (offset 25 lines).
Hunk #6 succeeded at 7174 (offset 25 lines).
Hunk #7 succeeded at 8140 (offset 28 lines).
Hunk #8 succeeded at 10769 (offset 59 lines).
(cd /tmp/instance-14/output-1/build/libmad-0.15.1b/ && rm -rf config.cache && PATH="/tmp/instance-14/output-1/per-package/libmad/host/bin:/tmp/instance-14/output-1/per-package/libmad/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc-ar" AS="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-as" LD="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-ld" NM="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc-nm" CC="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc" GCC="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc" CPP="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-cpp" CXX="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-g++" FC="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gfortran" F77="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gfortran" RANLIB="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc-ranlib" READELF="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-readelf" STRIP="/bin/true" OBJCOPY="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-objcopy" OBJDUMP="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/tmp/instance-14/output-1/per-package/libmad/host/include" CFLAGS_FOR_BUILD="-O2 -I/tmp/instance-14/output-1/per-package/libmad/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/tmp/instance-14/output-1/per-package/libmad/host/include" LDFLAGS_FOR_BUILD="-L/tmp/instance-14/output-1/per-package/libmad/host/lib -Wl,-rpath,/tmp/instance-14/output-1/per-package/libmad/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-as" DEFAULT_LINKER="/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Ofast -g0 -D_FORTIFY_SOURCE=1" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Ofast -g0 -D_FORTIFY_SOURCE=1" LDFLAGS="" FCFLAGS=" -Ofast -g0" FFLAGS=" -Ofast -g0" PKG_CONFIG="/tmp/instance-14/output-1/per-package/libmad/host/bin/pkg-config" STAGING_DIR="/tmp/instance-14/output-1/per-package/libmad/host/armeb-buildroot-linux-gnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes   CONFIG_SITE=/dev/null ./configure --target=armeb-buildroot-linux-gnueabi --host=armeb-buildroot-linux-gnueabi --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared  --disable-debugging  --enable-accuracy --disable-sso --enable-aso --disable-strict-iso )
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for armeb-buildroot-linux-gnueabi-strip... /bin/true
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... armeb-buildroot-linux-gnueabi
checking for armeb-buildroot-linux-gnueabi-gcc... /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc accepts -g... yes
checking for /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc option to enable C11 features... none needed
checking whether /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc... none
checking dependency style of /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc... none
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc... /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-ld
checking if the linker (/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc-nm
checking the name lister (/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to armeb-buildroot-linux-gnueabi format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-ld option to reload object files... -r
checking for armeb-buildroot-linux-gnueabi-objdump... /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-objdump
checking how to recognize dependent libraries... pass_all
checking for armeb-buildroot-linux-gnueabi-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for armeb-buildroot-linux-gnueabi-ar... /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc-ar
checking for archiver @FILE support... @
checking for armeb-buildroot-linux-gnueabi-strip... (cached) /bin/true
checking for armeb-buildroot-linux-gnueabi-ranlib... /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc-ranlib
checking command to parse /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc-nm output from /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for armeb-buildroot-linux-gnueabi-mt... no
checking for mt... mt
configure: WARNING: using cross tools not prefixed with host triplet
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no
checking for /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC
checking if /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes
checking if /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc static flag -static works... yes
checking if /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc supports -c -o file.o... yes
checking if /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc supports -c -o file.o... (cached) yes
checking whether the /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc linker (/tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for egrep... (cached) /usr/bin/grep -E
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for assert.h... yes
checking for limits.h... yes
checking for unistd.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for fcntl.h... yes
checking for errno.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether byte ordering is bigendian... (cached) yes
checking for pid_t... yes
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking for waitpid... yes
checking for fcntl... yes
checking for pipe... yes
checking for fork... yes
checking whether to optimize for speed or for accuracy... accuracy
checking for architecture-specific fixed-point math routines... ARM
checking for ISO/IEC interpretation... best accepted practices
checking whether to enable profiling... no
checking whether to enable debugging... no
checking whether to enable experimental code... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating msvc++/Makefile
config.status: creating libmad.list
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
>>> libmad 0.15.1b Building
PATH="/tmp/instance-14/output-1/per-package/libmad/host/bin:/tmp/instance-14/output-1/per-package/libmad/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"  /home/autobuild/make/make   -C /tmp/instance-14/output-1/build/libmad-0.15.1b/
make[1]: Entering directory '/tmp/instance-14/output-1/build/libmad-0.15.1b'
(sed -e '1s|.*|/*|' -e '1b' -e '$s|.*| */|' -e '$b'  \
	-e 's/^.*/ *&/' ./COPYRIGHT; echo;  \
echo "# ifdef __cplusplus";  \
echo 'extern "C" {';  \
echo "# endif"; echo;  \
if [ ".-DFPM_ARM" != "." ]; then  \
	echo ".-DFPM_ARM" | sed -e 's|^\.-D|# define |'; echo;  \
fi;  \
sed -ne 's/^# *define  *\(HAVE_.*_ASM\).*/# define \1/p'  \
	config.h; echo;  \
sed -ne 's/^# *define  *OPT_\(SPEED\|ACCURACY\).*/# define OPT_\1/p'  \
	config.h; echo;  \
sed -ne 's/^# *define  *\(SIZEOF_.*\)/# define \1/p'  \
	config.h; echo;  \
for header in version.h fixed.h bit.h timer.h stream.h frame.h synth.h decoder.h; do  \
	echo;  \
	sed -n -f ./mad.h.sed ./$header;  \
done; echo;  \
echo "# ifdef __cplusplus";  \
echo '}';  \
echo "# endif") >mad.h
/home/autobuild/make/make  all-recursive
make[2]: Entering directory '/tmp/instance-14/output-1/build/libmad-0.15.1b'
make[3]: Entering directory '/tmp/instance-14/output-1/build/libmad-0.15.1b'
/bin/bash ./libtool  --tag=CC   --mode=compile /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c -o version.lo version.c
libtool: compile:  /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c version.c  -fPIC -DPIC -o .libs/version.o
/bin/bash ./libtool  --tag=CC   --mode=compile /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c -o fixed.lo fixed.c
libtool: compile:  /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c fixed.c  -fPIC -DPIC -o .libs/fixed.o
/bin/bash ./libtool  --tag=CC   --mode=compile /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c -o bit.lo bit.c
libtool: compile:  /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c bit.c  -fPIC -DPIC -o .libs/bit.o
/bin/bash ./libtool  --tag=CC   --mode=compile /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c -o timer.lo timer.c
libtool: compile:  /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c timer.c  -fPIC -DPIC -o .libs/timer.o
/bin/bash ./libtool  --tag=CC   --mode=compile /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c -o stream.lo stream.c
libtool: compile:  /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c stream.c  -fPIC -DPIC -o .libs/stream.o
/bin/bash ./libtool  --tag=CC   --mode=compile /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c -o frame.lo frame.c
libtool: compile:  /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c frame.c  -fPIC -DPIC -o .libs/frame.o
/bin/bash ./libtool  --tag=CC   --mode=compile /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c -o synth.lo synth.c
libtool: compile:  /tmp/instance-14/output-1/per-package/libmad/host/bin/armeb-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -DASO_INTERLEAVE1 -DASO_IMDCT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -D_FORTIFY_SOURCE=1 -O2 -fomit-frame-pointer -c synth.c  -fPIC -DPIC -o .libs/synth.o
/tmp/ccHYwKPa.s: Assembler messages:
/tmp/ccHYwKPa.s:42: Error: selected processor does not support `smull r0,r4,r2,r3' in Thumb mode
/tmp/ccHYwKPa.s:43: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:44: Error: unshifted register required -- `adc r2,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:55: Error: selected processor does not support `smull r5,r6,r3,r4' in Thumb mode
/tmp/ccHYwKPa.s:56: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r5,lsr#28'
/tmp/ccHYwKPa.s:57: Error: unshifted register required -- `adc r3,r5,r6,lsl#4'
/tmp/ccHYwKPa.s:68: Error: selected processor does not support `smull r3,r5,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:69: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r3,r3,lsr#28'
/tmp/ccHYwKPa.s:70: Error: unshifted register required -- `adc r8,r3,r5,lsl#4'
/tmp/ccHYwKPa.s:78: Error: selected processor does not support `smull r2,r1,r0,r4' in Thumb mode
/tmp/ccHYwKPa.s:79: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:80: Error: unshifted register required -- `adc r8,r2,r1,lsl#4'
/tmp/ccHYwKPa.s:93: Error: selected processor does not support `smull r1,r0,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:94: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28'
/tmp/ccHYwKPa.s:95: Error: unshifted register required -- `adc r2,r1,r0,lsl#4'
/tmp/ccHYwKPa.s:108: Error: selected processor does not support `smull r0,r4,r5,r6' in Thumb mode
/tmp/ccHYwKPa.s:109: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:110: Error: unshifted register required -- `adc r5,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:120: Error: selected processor does not support `smull r0,r4,r5,r2' in Thumb mode
/tmp/ccHYwKPa.s:121: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:122: Error: unshifted register required -- `adc r8,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:131: Error: selected processor does not support `smull r1,r0,r3,r2' in Thumb mode
/tmp/ccHYwKPa.s:132: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28'
/tmp/ccHYwKPa.s:133: Error: unshifted register required -- `adc r3,r1,r0,lsl#4'
/tmp/ccHYwKPa.s:145: Error: selected processor does not support `smull r3,r0,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:146: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r3,r3,lsr#28'
/tmp/ccHYwKPa.s:147: Error: unshifted register required -- `adc r2,r3,r0,lsl#4'
/tmp/ccHYwKPa.s:160: Error: selected processor does not support `smull r5,r6,r3,r0' in Thumb mode
/tmp/ccHYwKPa.s:161: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r5,lsr#28'
/tmp/ccHYwKPa.s:162: Error: unshifted register required -- `adc r3,r5,r6,lsl#4'
/tmp/ccHYwKPa.s:172: Error: selected processor does not support `smull r0,r5,r3,r2' in Thumb mode
/tmp/ccHYwKPa.s:173: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:174: Error: unshifted register required -- `adc r8,r0,r5,lsl#4'
/tmp/ccHYwKPa.s:185: Error: selected processor does not support `smull r3,r0,r1,r2' in Thumb mode
/tmp/ccHYwKPa.s:186: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r3,r3,lsr#28'
/tmp/ccHYwKPa.s:187: Error: unshifted register required -- `adc r8,r3,r0,lsl#4'
/tmp/ccHYwKPa.s:201: Error: selected processor does not support `smull r1,r0,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:202: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28'
/tmp/ccHYwKPa.s:203: Error: unshifted register required -- `adc r2,r1,r0,lsl#4'
/tmp/ccHYwKPa.s:213: Error: selected processor does not support `smull r0,r4,r5,r6' in Thumb mode
/tmp/ccHYwKPa.s:214: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:215: Error: unshifted register required -- `adc r5,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:225: Error: selected processor does not support `smull r0,r4,r5,r2' in Thumb mode
/tmp/ccHYwKPa.s:226: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:227: Error: unshifted register required -- `adc r8,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:237: Error: selected processor does not support `smull r1,r0,r3,r2' in Thumb mode
/tmp/ccHYwKPa.s:238: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28'
/tmp/ccHYwKPa.s:239: Error: unshifted register required -- `adc r8,r1,r0,lsl#4'
/tmp/ccHYwKPa.s:254: Error: selected processor does not support `smull r1,r0,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:255: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28'
/tmp/ccHYwKPa.s:256: Error: unshifted register required -- `adc r2,r1,r0,lsl#4'
/tmp/ccHYwKPa.s:266: Error: selected processor does not support `smull r0,r4,r5,r6' in Thumb mode
/tmp/ccHYwKPa.s:267: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:268: Error: unshifted register required -- `adc r5,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:278: Error: selected processor does not support `smull r0,r4,r5,r2' in Thumb mode
/tmp/ccHYwKPa.s:279: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:280: Error: unshifted register required -- `adc r8,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:289: Error: selected processor does not support `smull r1,r0,r3,r2' in Thumb mode
/tmp/ccHYwKPa.s:290: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28'
/tmp/ccHYwKPa.s:291: Error: unshifted register required -- `adc r8,r1,r0,lsl#4'
/tmp/ccHYwKPa.s:307: Error: selected processor does not support `smull r2,r1,r3,r0' in Thumb mode
/tmp/ccHYwKPa.s:308: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:309: Error: unshifted register required -- `adc r3,r2,r1,lsl#4'
/tmp/ccHYwKPa.s:319: Error: selected processor does not support `smull r1,r0,r4,r6' in Thumb mode
/tmp/ccHYwKPa.s:320: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28'
/tmp/ccHYwKPa.s:321: Error: unshifted register required -- `adc r4,r1,r0,lsl#4'
/tmp/ccHYwKPa.s:332: Error: selected processor does not support `smull r1,r0,r4,r3' in Thumb mode
/tmp/ccHYwKPa.s:333: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28'
/tmp/ccHYwKPa.s:334: Error: unshifted register required -- `adc r8,r1,r0,lsl#4'
/tmp/ccHYwKPa.s:341: Error: selected processor does not support `smull r2,r1,r5,r3' in Thumb mode
/tmp/ccHYwKPa.s:342: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:343: Error: unshifted register required -- `adc r5,r2,r1,lsl#4'
/tmp/ccHYwKPa.s:356: Error: selected processor does not support `smull r3,r0,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:357: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r3,r3,lsr#28'
/tmp/ccHYwKPa.s:358: Error: unshifted register required -- `adc r2,r3,r0,lsl#4'
/tmp/ccHYwKPa.s:371: Error: selected processor does not support `smull r4,r6,r3,ip' in Thumb mode
/tmp/ccHYwKPa.s:372: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r4,r4,lsr#28'
/tmp/ccHYwKPa.s:373: Error: unshifted register required -- `adc r3,r4,r6,lsl#4'
/tmp/ccHYwKPa.s:382: Error: selected processor does not support `smull r4,ip,r3,r2' in Thumb mode
/tmp/ccHYwKPa.s:383: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r4,r4,lsr#28'
/tmp/ccHYwKPa.s:384: Error: unshifted register required -- `adc r3,r4,ip,lsl#4'
/tmp/ccHYwKPa.s:393: Error: selected processor does not support `smull r0,r4,r1,r2' in Thumb mode
/tmp/ccHYwKPa.s:394: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:395: Error: unshifted register required -- `adc ip,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:409: Error: selected processor does not support `smull r2,r9,r0,r10' in Thumb mode
/tmp/ccHYwKPa.s:410: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:411: Error: unshifted register required -- `adc r0,r2,r9,lsl#4'
/tmp/ccHYwKPa.s:424: Error: selected processor does not support `smull ip,r10,r2,r7' in Thumb mode
/tmp/ccHYwKPa.s:425: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:426: Error: unshifted register required -- `adc r2,ip,r10,lsl#4'
/tmp/ccHYwKPa.s:435: Error: selected processor does not support `smull r10,fp,r2,r0' in Thumb mode
/tmp/ccHYwKPa.s:436: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r10,r10,lsr#28'
/tmp/ccHYwKPa.s:437: Error: unshifted register required -- `adc ip,r10,fp,lsl#4'
/tmp/ccHYwKPa.s:450: Error: selected processor does not support `smull r9,fp,r4,r0' in Thumb mode
/tmp/ccHYwKPa.s:451: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28'
/tmp/ccHYwKPa.s:452: Error: unshifted register required -- `adc r4,r9,fp,lsl#4'
/tmp/ccHYwKPa.s:467: Error: selected processor does not support `smull r9,fp,r0,r2' in Thumb mode
/tmp/ccHYwKPa.s:468: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28'
/tmp/ccHYwKPa.s:469: Error: unshifted register required -- `adc ip,r9,fp,lsl#4'
/tmp/ccHYwKPa.s:487: Error: selected processor does not support `smull r9,fp,r0,r7' in Thumb mode
/tmp/ccHYwKPa.s:488: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28'
/tmp/ccHYwKPa.s:489: Error: unshifted register required -- `adc r7,r9,fp,lsl#4'
/tmp/ccHYwKPa.s:505: Error: selected processor does not support `smull r8,r9,r0,r7' in Thumb mode
/tmp/ccHYwKPa.s:506: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r8,r8,lsr#28'
/tmp/ccHYwKPa.s:507: Error: unshifted register required -- `adc r7,r8,r9,lsl#4'
/tmp/ccHYwKPa.s:522: Error: selected processor does not support `smull r0,r8,r7,r10' in Thumb mode
/tmp/ccHYwKPa.s:523: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:524: Error: unshifted register required -- `adc r7,r0,r8,lsl#4'
/tmp/ccHYwKPa.s:537: Error: selected processor does not support `smull r7,r8,r0,r2' in Thumb mode
/tmp/ccHYwKPa.s:538: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r7,r7,lsr#28'
/tmp/ccHYwKPa.s:539: Error: unshifted register required -- `adc r4,r7,r8,lsl#4'
/tmp/ccHYwKPa.s:552: Error: selected processor does not support `smull r7,r8,r0,ip' in Thumb mode
/tmp/ccHYwKPa.s:553: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r7,r7,lsr#28'
/tmp/ccHYwKPa.s:554: Error: unshifted register required -- `adc r4,r7,r8,lsl#4'
/tmp/ccHYwKPa.s:569: Error: selected processor does not support `smull r7,r8,r0,fp' in Thumb mode
/tmp/ccHYwKPa.s:570: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r7,r7,lsr#28'
/tmp/ccHYwKPa.s:571: Error: unshifted register required -- `adc r0,r7,r8,lsl#4'
/tmp/ccHYwKPa.s:583: Error: selected processor does not support `smull r0,r7,r6,r10' in Thumb mode
/tmp/ccHYwKPa.s:584: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:585: Error: unshifted register required -- `adc r8,r0,r7,lsl#4'
/tmp/ccHYwKPa.s:599: Error: selected processor does not support `smull r6,r7,r0,r2' in Thumb mode
/tmp/ccHYwKPa.s:600: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28'
/tmp/ccHYwKPa.s:601: Error: unshifted register required -- `adc r8,r6,r7,lsl#4'
/tmp/ccHYwKPa.s:618: Error: selected processor does not support `smull r6,r7,r0,ip' in Thumb mode
/tmp/ccHYwKPa.s:619: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28'
/tmp/ccHYwKPa.s:620: Error: unshifted register required -- `adc r8,r6,r7,lsl#4'
/tmp/ccHYwKPa.s:666: Error: selected processor does not support `smull r5,r6,r0,fp' in Thumb mode
/tmp/ccHYwKPa.s:667: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r5,lsr#28'
/tmp/ccHYwKPa.s:668: Error: unshifted register required -- `adc r8,r5,r6,lsl#4'
/tmp/ccHYwKPa.s:682: Error: selected processor does not support `smull r0,r4,r1,r10' in Thumb mode
/tmp/ccHYwKPa.s:683: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:684: Error: unshifted register required -- `adc r8,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:698: Error: selected processor does not support `smull r0,r4,r1,r2' in Thumb mode
/tmp/ccHYwKPa.s:699: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:700: Error: unshifted register required -- `adc r8,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:717: Error: selected processor does not support `smull r0,r4,r1,ip' in Thumb mode
/tmp/ccHYwKPa.s:718: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:719: Error: unshifted register required -- `adc ip,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:733: Error: selected processor does not support `smull r0,r4,r1,fp' in Thumb mode
/tmp/ccHYwKPa.s:734: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:735: Error: unshifted register required -- `adc fp,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:750: Error: selected processor does not support `smull r2,r1,r3,r10' in Thumb mode
/tmp/ccHYwKPa.s:751: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:752: Error: unshifted register required -- `adc r10,r2,r1,lsl#4'
/tmp/ccHYwKPa.s:776: Error: selected processor does not support `smull r2,r4,r3,r10' in Thumb mode
/tmp/ccHYwKPa.s:777: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:778: Error: unshifted register required -- `adc r3,r2,r4,lsl#4'
/tmp/ccHYwKPa.s:925: Error: selected processor does not support `smull ip,r8,r3,r0' in Thumb mode
/tmp/ccHYwKPa.s:926: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:927: Error: unshifted register required -- `adc r3,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:940: Error: selected processor does not support `smull ip,r0,r8,r9' in Thumb mode
/tmp/ccHYwKPa.s:941: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:942: Error: unshifted register required -- `adc r8,ip,r0,lsl#4'
/tmp/ccHYwKPa.s:959: Error: selected processor does not support `smull r8,ip,r3,r10' in Thumb mode
/tmp/ccHYwKPa.s:960: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r8,r8,lsr#28'
/tmp/ccHYwKPa.s:961: Error: unshifted register required -- `adc r3,r8,ip,lsl#4'
/tmp/ccHYwKPa.s:973: Error: selected processor does not support `smull r6,ip,r3,fp' in Thumb mode
/tmp/ccHYwKPa.s:974: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28'
/tmp/ccHYwKPa.s:975: Error: unshifted register required -- `adc r8,r6,ip,lsl#4'
/tmp/ccHYwKPa.s:985: Error: selected processor does not support `smull r6,ip,r3,r9' in Thumb mode
/tmp/ccHYwKPa.s:986: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28'
/tmp/ccHYwKPa.s:987: Error: unshifted register required -- `adc r8,r6,ip,lsl#4'
/tmp/ccHYwKPa.s:1005: Error: selected processor does not support `smull r5,ip,r3,fp' in Thumb mode
/tmp/ccHYwKPa.s:1006: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r5,lsr#28'
/tmp/ccHYwKPa.s:1007: Error: unshifted register required -- `adc r3,r5,ip,lsl#4'
/tmp/ccHYwKPa.s:1017: Error: selected processor does not support `smull ip,r8,r5,r9' in Thumb mode
/tmp/ccHYwKPa.s:1018: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1019: Error: unshifted register required -- `adc r5,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1036: Error: selected processor does not support `smull ip,r8,r2,fp' in Thumb mode
/tmp/ccHYwKPa.s:1037: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1038: Error: unshifted register required -- `adc r1,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1047: Error: selected processor does not support `smull ip,r8,r2,r9' in Thumb mode
/tmp/ccHYwKPa.s:1048: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1049: Error: unshifted register required -- `adc r2,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1072: Error: selected processor does not support `smull r6,ip,r2,fp' in Thumb mode
/tmp/ccHYwKPa.s:1073: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28'
/tmp/ccHYwKPa.s:1074: Error: unshifted register required -- `adc r2,r6,ip,lsl#4'
/tmp/ccHYwKPa.s:1083: Error: selected processor does not support `smull ip,r8,r6,r9' in Thumb mode
/tmp/ccHYwKPa.s:1084: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1085: Error: unshifted register required -- `adc r6,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1103: Error: selected processor does not support `smull r8,ip,r4,r10' in Thumb mode
/tmp/ccHYwKPa.s:1104: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r8,r8,lsr#28'
/tmp/ccHYwKPa.s:1105: Error: unshifted register required -- `adc r4,r8,ip,lsl#4'
/tmp/ccHYwKPa.s:1114: Error: selected processor does not support `smull r6,ip,r2,r10' in Thumb mode
/tmp/ccHYwKPa.s:1115: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28'
/tmp/ccHYwKPa.s:1116: Error: unshifted register required -- `adc r2,r6,ip,lsl#4'
/tmp/ccHYwKPa.s:1137: Error: selected processor does not support `smull r2,r4,r6,fp' in Thumb mode
/tmp/ccHYwKPa.s:1138: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:1139: Error: unshifted register required -- `adc r8,r2,r4,lsl#4'
/tmp/ccHYwKPa.s:1148: Error: selected processor does not support `smull r2,r4,r6,r9' in Thumb mode
/tmp/ccHYwKPa.s:1149: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:1150: Error: unshifted register required -- `adc r8,r2,r4,lsl#4'
/tmp/ccHYwKPa.s:1172: Error: selected processor does not support `smull r6,r7,r2,r10' in Thumb mode
/tmp/ccHYwKPa.s:1173: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28'
/tmp/ccHYwKPa.s:1174: Error: unshifted register required -- `adc r2,r6,r7,lsl#4'
/tmp/ccHYwKPa.s:1187: Error: selected processor does not support `smull r4,r6,r2,fp' in Thumb mode
/tmp/ccHYwKPa.s:1188: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r4,r4,lsr#28'
/tmp/ccHYwKPa.s:1189: Error: unshifted register required -- `adc r2,r4,r6,lsl#4'
/tmp/ccHYwKPa.s:1198: Error: selected processor does not support `smull r4,r6,r7,r9' in Thumb mode
/tmp/ccHYwKPa.s:1199: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r4,r4,lsr#28'
/tmp/ccHYwKPa.s:1200: Error: unshifted register required -- `adc r7,r4,r6,lsl#4'
/tmp/ccHYwKPa.s:1222: Error: selected processor does not support `smull ip,r8,r6,r10' in Thumb mode
/tmp/ccHYwKPa.s:1223: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1224: Error: unshifted register required -- `adc r6,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1236: Error: selected processor does not support `smull ip,r8,r4,r10' in Thumb mode
/tmp/ccHYwKPa.s:1237: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1238: Error: unshifted register required -- `adc r4,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1248: Error: selected processor does not support `smull r5,r8,r3,r10' in Thumb mode
/tmp/ccHYwKPa.s:1249: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r5,lsr#28'
/tmp/ccHYwKPa.s:1250: Error: unshifted register required -- `adc r3,r5,r8,lsl#4'
/tmp/ccHYwKPa.s:1267: Error: selected processor does not support `smull r5,r6,r2,r10' in Thumb mode
/tmp/ccHYwKPa.s:1268: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r5,lsr#28'
/tmp/ccHYwKPa.s:1269: Error: unshifted register required -- `adc r2,r5,r6,lsl#4'
/tmp/ccHYwKPa.s:1290: Error: selected processor does not support `smull r2,r4,r3,fp' in Thumb mode
/tmp/ccHYwKPa.s:1291: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:1292: Error: unshifted register required -- `adc r3,r2,r4,lsl#4'
/tmp/ccHYwKPa.s:1299: Error: selected processor does not support `smull r2,r5,r4,r9' in Thumb mode
/tmp/ccHYwKPa.s:1300: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28'
/tmp/ccHYwKPa.s:1301: Error: unshifted register required -- `adc fp,r2,r5,lsl#4'
/tmp/ccHYwKPa.s:1319: Error: selected processor does not support `smull r8,r9,r2,r10' in Thumb mode
/tmp/ccHYwKPa.s:1320: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r8,r8,lsr#28'
/tmp/ccHYwKPa.s:1321: Error: unshifted register required -- `adc r2,r8,r9,lsl#4'
/tmp/ccHYwKPa.s:1346: Error: selected processor does not support `smull ip,r8,r0,r10' in Thumb mode
/tmp/ccHYwKPa.s:1347: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1348: Error: unshifted register required -- `adc r0,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1367: Error: selected processor does not support `smull ip,r8,r5,r10' in Thumb mode
/tmp/ccHYwKPa.s:1368: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1369: Error: unshifted register required -- `adc r5,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1388: Error: selected processor does not support `smull ip,r8,r0,r10' in Thumb mode
/tmp/ccHYwKPa.s:1389: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1390: Error: unshifted register required -- `adc r0,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1407: Error: selected processor does not support `smull ip,r8,r6,r10' in Thumb mode
/tmp/ccHYwKPa.s:1408: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1409: Error: unshifted register required -- `adc r6,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1429: Error: selected processor does not support `smull ip,r8,r0,r10' in Thumb mode
/tmp/ccHYwKPa.s:1430: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28'
/tmp/ccHYwKPa.s:1431: Error: unshifted register required -- `adc r0,ip,r8,lsl#4'
/tmp/ccHYwKPa.s:1449: Error: selected processor does not support `smull r0,r4,r3,r10' in Thumb mode
/tmp/ccHYwKPa.s:1450: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r0,lsr#28'
/tmp/ccHYwKPa.s:1451: Error: unshifted register required -- `adc r3,r0,r4,lsl#4'
/tmp/ccHYwKPa.s:1595: Error: selected processor does not support `smull r3,r2,r7,r8' in Thumb mode
/tmp/ccHYwKPa.s:1605: Error: selected processor does not support `smlal r3,r2,r7,r5' in Thumb mode
/tmp/ccHYwKPa.s:1613: Error: selected processor does not support `smlal r3,r2,r7,r5' in Thumb mode
/tmp/ccHYwKPa.s:1621: Error: selected processor does not support `smlal r3,r2,r7,r5' in Thumb mode
/tmp/ccHYwKPa.s:1629: Error: selected processor does not support `smlal r3,r2,r7,r5' in Thumb mode
/tmp/ccHYwKPa.s:1637: Error: selected processor does not support `smlal r3,r2,r7,r5' in Thumb mode
/tmp/ccHYwKPa.s:1645: Error: selected processor does not support `smlal r3,r2,r7,r5' in Thumb mode
/tmp/ccHYwKPa.s:1653: Error: selected processor does not support `smlal r3,r2,r1,r0' in Thumb mode
/tmp/ccHYwKPa.s:1656: Error: cannot honor width suffix -- `rsbs r3,r3,#0'
/tmp/ccHYwKPa.s:1674: Error: selected processor does not support `smlal r3,r1,r5,r7' in Thumb mode
/tmp/ccHYwKPa.s:1682: Error: selected processor does not support `smlal r3,r1,r5,r7' in Thumb mode
/tmp/ccHYwKPa.s:1690: Error: selected processor does not support `smlal r3,r1,r5,r7' in Thumb mode
/tmp/ccHYwKPa.s:1698: Error: selected processor does not support `smlal r3,r1,r5,r7' in Thumb mode
/tmp/ccHYwKPa.s:1706: Error: selected processor does not support `smlal r3,r1,r5,r7' in Thumb mode
/tmp/ccHYwKPa.s:1714: Error: selected processor does not support `smlal r3,r1,r5,r7' in Thumb mode
/tmp/ccHYwKPa.s:1722: Error: selected processor does not support `smlal r3,r1,r5,r7' in Thumb mode
/tmp/ccHYwKPa.s:1730: Error: selected processor does not support `smlal r3,r1,r5,r0' in Thumb mode
/tmp/ccHYwKPa.s:1733: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r0,r3,lsr#16'
/tmp/ccHYwKPa.s:1734: Error: unshifted register required -- `adc r0,r0,r1,lsl#16'
/tmp/ccHYwKPa.s:1768: Error: selected processor does not support `smull r3,r6,r2,ip' in Thumb mode
/tmp/ccHYwKPa.s:1775: Error: selected processor does not support `smlal r3,r6,r2,r7' in Thumb mode
/tmp/ccHYwKPa.s:1783: Error: selected processor does not support `smlal r3,r6,r2,r7' in Thumb mode
/tmp/ccHYwKPa.s:1791: Error: selected processor does not support `smlal r3,r6,r2,r7' in Thumb mode
/tmp/ccHYwKPa.s:1799: Error: selected processor does not support `smlal r3,r6,r2,r7' in Thumb mode
/tmp/ccHYwKPa.s:1807: Error: selected processor does not support `smlal r3,r6,r2,r7' in Thumb mode
/tmp/ccHYwKPa.s:1815: Error: selected processor does not support `smlal r3,r6,r2,r7' in Thumb mode
/tmp/ccHYwKPa.s:1823: Error: selected processor does not support `smlal r3,r6,r2,r7' in Thumb mode
/tmp/ccHYwKPa.s:1830: Error: cannot honor width suffix -- `rsbs r3,r3,#0'
/tmp/ccHYwKPa.s:1839: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1847: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1855: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1863: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1871: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1879: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1887: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1895: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1898: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r3,lsr#16'
/tmp/ccHYwKPa.s:1899: Error: unshifted register required -- `adc r6,r6,r2,lsl#16'
/tmp/ccHYwKPa.s:1916: Error: selected processor does not support `smull r3,r2,r6,r8' in Thumb mode
/tmp/ccHYwKPa.s:1923: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1932: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1941: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1950: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1959: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1968: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1977: Error: selected processor does not support `smlal r3,r2,r6,r7' in Thumb mode
/tmp/ccHYwKPa.s:1988: Error: selected processor does not support `smlal r3,r2,ip,r7' in Thumb mode
/tmp/ccHYwKPa.s:1998: Error: selected processor does not support `smlal r3,r2,ip,r7' in Thumb mode
/tmp/ccHYwKPa.s:2008: Error: selected processor does not support `smlal r3,r2,ip,r7' in Thumb mode
/tmp/ccHYwKPa.s:2017: Error: selected processor does not support `smlal r3,r2,ip,r7' in Thumb mode
/tmp/ccHYwKPa.s:2026: Error: selected processor does not support `smlal r3,r2,ip,r7' in Thumb mode
/tmp/ccHYwKPa.s:2035: Error: selected processor does not support `smlal r3,r2,ip,r7' in Thumb mode
/tmp/ccHYwKPa.s:2044: Error: selected processor does not support `smlal r3,r2,ip,r7' in Thumb mode
/tmp/ccHYwKPa.s:2052: Error: selected processor does not support `smlal r3,r2,r7,r6' in Thumb mode
/tmp/ccHYwKPa.s:2055: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r3,lsr#16'
/tmp/ccHYwKPa.s:2056: Error: unshifted register required -- `adc r6,r6,r2,lsl#16'
/tmp/ccHYwKPa.s:2080: Error: selected processor does not support `smull r3,r2,r0,r4' in Thumb mode
/tmp/ccHYwKPa.s:2091: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2099: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2107: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2115: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2123: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2131: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2139: Error: selected processor does not support `smlal r3,r2,r0,r1' in Thumb mode
/tmp/ccHYwKPa.s:2142: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r3,lsr#16'
/tmp/ccHYwKPa.s:2143: Error: unshifted register required -- `adc r1,r1,r2,lsl#16'
/tmp/ccHYwKPa.s:2315: Error: selected processor does not support `smull r2,r1,ip,r4' in Thumb mode
/tmp/ccHYwKPa.s:2327: Error: selected processor does not support `smlal r2,r1,ip,r4' in Thumb mode
/tmp/ccHYwKPa.s:2336: Error: selected processor does not support `smlal r2,r1,ip,r4' in Thumb mode
/tmp/ccHYwKPa.s:2345: Error: selected processor does not support `smlal r2,r1,ip,r4' in Thumb mode
/tmp/ccHYwKPa.s:2354: Error: selected processor does not support `smlal r2,r1,ip,r4' in Thumb mode
/tmp/ccHYwKPa.s:2363: Error: selected processor does not support `smlal r2,r1,ip,r4' in Thumb mode
/tmp/ccHYwKPa.s:2373: Error: selected processor does not support `smlal r2,r1,ip,r4' in Thumb mode
/tmp/ccHYwKPa.s:2380: Error: selected processor does not support `smlal r2,r1,r0,r7' in Thumb mode
/tmp/ccHYwKPa.s:2388: Error: cannot honor width suffix -- `rsbs r0,r0,#0'
/tmp/ccHYwKPa.s:2403: Error: selected processor does not support `smlal r0,r7,r6,r4' in Thumb mode
/tmp/ccHYwKPa.s:2411: Error: selected processor does not support `smlal r0,r7,r6,r4' in Thumb mode
/tmp/ccHYwKPa.s:2419: Error: selected processor does not support `smlal r0,r7,r6,r4' in Thumb mode
/tmp/ccHYwKPa.s:2427: Error: selected processor does not support `smlal r0,r7,r6,r4' in Thumb mode
/tmp/ccHYwKPa.s:2435: Error: selected processor does not support `smlal r0,r7,r6,r4' in Thumb mode
/tmp/ccHYwKPa.s:2443: Error: selected processor does not support `smlal r0,r7,r6,r4' in Thumb mode
/tmp/ccHYwKPa.s:2451: Error: selected processor does not support `smlal r0,r7,r6,r4' in Thumb mode
/tmp/ccHYwKPa.s:2460: Error: selected processor does not support `smlal r0,r7,r6,r1' in Thumb mode
/tmp/ccHYwKPa.s:2463: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r0,lsr#16'
/tmp/ccHYwKPa.s:2464: Error: unshifted register required -- `adc r1,r1,r7,lsl#16'
/tmp/ccHYwKPa.s:2513: Error: selected processor does not support `smull r3,r10,r2,fp' in Thumb mode
/tmp/ccHYwKPa.s:2520: Error: selected processor does not support `smlal r3,r10,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:2528: Error: selected processor does not support `smlal r3,r10,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:2536: Error: selected processor does not support `smlal r3,r10,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:2544: Error: selected processor does not support `smlal r3,r10,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:2552: Error: selected processor does not support `smlal r3,r10,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:2560: Error: selected processor does not support `smlal r3,r10,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:2568: Error: selected processor does not support `smlal r3,r10,r2,r4' in Thumb mode
/tmp/ccHYwKPa.s:2575: Error: cannot honor width suffix -- `rsbs r3,r3,#0'
/tmp/ccHYwKPa.s:2577: Error: lo register required -- `sub r2,r2,r10'
/tmp/ccHYwKPa.s:2585: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2594: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2603: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2612: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2621: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2630: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2639: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2648: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2651: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r10,r3,lsr#16'
/tmp/ccHYwKPa.s:2652: Error: unshifted register required -- `adc r10,r10,r2,lsl#16'
/tmp/ccHYwKPa.s:2667: Error: selected processor does not support `smull r3,r2,r10,fp' in Thumb mode
/tmp/ccHYwKPa.s:2675: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2684: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2693: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2702: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2711: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2720: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2729: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2739: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2749: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2759: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2769: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2779: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2789: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2799: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2809: Error: selected processor does not support `smlal r3,r2,r10,r4' in Thumb mode
/tmp/ccHYwKPa.s:2812: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r10,r3,lsr#16'
/tmp/ccHYwKPa.s:2813: Error: unshifted register required -- `adc r10,r10,r2,lsl#16'
/tmp/ccHYwKPa.s:2853: Error: selected processor does not support `smull r3,r2,r0,r4' in Thumb mode
/tmp/ccHYwKPa.s:2864: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2872: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2880: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2888: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2896: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2904: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode
/tmp/ccHYwKPa.s:2912: Error: selected processor does not support `smlal r3,r2,r0,r1' in Thumb mode
/tmp/ccHYwKPa.s:2915: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r3,lsr#16'
/tmp/ccHYwKPa.s:2916: Error: unshifted register required -- `adc r1,r1,r2,lsl#16'
make[3]: *** [Makefile:617: synth.lo] Error 1
make[3]: Leaving directory '/tmp/instance-14/output-1/build/libmad-0.15.1b'
make[2]: *** [Makefile:656: all-recursive] Error 1
make[2]: Leaving directory '/tmp/instance-14/output-1/build/libmad-0.15.1b'
make[1]: *** [Makefile:454: all] Error 2
make[1]: Leaving directory '/tmp/instance-14/output-1/build/libmad-0.15.1b'
make: *** [package/pkg-generic.mk:293: /tmp/instance-14/output-1/build/libmad-0.15.1b/.stamp_built] Error 2
make: Leaving directory '/tmp/instance-14/buildroot'