checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking dev/ata/atavar.h usability... no checking dev/ata/atavar.h presence... no checking for dev/ata/atavar.h... no checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking sys/inttypes.h usability... no checking sys/inttypes.h presence... no checking for sys/inttypes.h... no checking sys/int_types.h usability... no checking sys/int_types.h presence... no checking for sys/int_types.h... no checking sys/tweio.h usability... no checking sys/tweio.h presence... no checking for sys/tweio.h... no checking sys/twereg.h usability... no checking sys/twereg.h presence... no checking for sys/twereg.h... no checking sys/tw_osl_ioctl.h usability... no checking sys/tw_osl_ioctl.h presence... no checking for sys/tw_osl_ioctl.h... no checking linux/compiler.h usability... no checking linux/compiler.h presence... no checking for linux/compiler.h... no checking dev/ciss/cissio.h usability... no checking dev/ciss/cissio.h presence... no checking for dev/ciss/cissio.h... no checking for linux/cciss_ioctl.h... yes checking for ntdddisk.h... no checking for ddk/ntdddisk.h... no checking wbemcli.h usability... no checking wbemcli.h presence... no checking for wbemcli.h... no checking for int64_t... yes checking for uint64_t... yes checking for getopt_long... yes checking for regcomp... yes checking for sigset... yes checking for strtoull... yes checking for uname... yes checking for clock_gettime... yes checking for ftime... yes checking for gettimeofday... yes checking whether byte ordering is bigendian... (cached) no checking whether /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ supports __attribute__((packed))... yes checking for systemdsystemunitdir... no checking for capng_clear in -lcap-ng... yes checking cap-ng.h usability... yes checking cap-ng.h presence... yes checking for cap-ng.h... yes checking whether to use libcap-ng... yes checking whether os_linux.cpp uses new interface... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared checking whether make sets $(MAKE)... (cached) yes configure: ----------------------------------------------------------------------------- smartmontools-6.5 configuration: host operating system: arm-buildroot-linux-uclibcgnueabi C++ compiler: /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ C compiler: /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc preprocessor flags: -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 C++ compiler flags: -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W C compiler flags: -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os linker flags: OS specific modules: os_linux.o cciss.o dev_areca.o binary install path: /usr/sbin man page install path: /usr/share/man doc file install path: /usr/share/doc/smartmontools examples install path: /usr/share/doc/smartmontools/examplescripts drive database file: /usr/share/smartmontools/drivedb.h database update script: /usr/sbin/update-smart-drivedb download tools: curl wget lynx svn local drive database: /etc/smart_drivedb.h smartd config file: /etc/smartd.conf smartd warning script: /etc/smartd_warning.sh smartd plugin path: /etc/smartd_warning.d smartd initd script: [disabled] smartd save files: [disabled] smartd attribute logs: [disabled] libcap-ng support: yes SELinux support: no NVMe DEVICESCAN: no ----------------------------------------------------------------------------- configure: WARNING: This version of smartmontools provides NVMe support which is still EXPERIMENTAL. NVMe devices are not yet included in smartd.conf 'DEVICESCAN' and 'smartctl --scan' unless '-d nvme' is specified. Use option '--with-nvme-devicescan' to include NVMe devices. Use option '--without-nvme-devicescan' to suppress this warning. >>> smartmontools 6.5 Building PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 -C /home/peko/autobuild/instance-2/output/build/smartmontools-6.5/ /usr/bin/make all-am /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o smartctl.o smartctl.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o atacmdnames.o atacmdnames.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o atacmds.o atacmds.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o ataidentify.o ataidentify.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o ataprint.o ataprint.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o dev_ata_cmd_set.o dev_ata_cmd_set.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o dev_interface.o dev_interface.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o knowndrives.o knowndrives.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o nvmecmds.o nvmecmds.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o nvmeprint.o nvmeprint.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o scsicmds.o scsicmds.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o scsiata.o scsiata.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o scsiprint.o scsiprint.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o os_linux.o os_linux.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o cciss.o cciss.cpp cat ChangeLog NEWS $(SOURCES) | $(VERSION_FROM_SVN_IDS) > svnversion.h /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o dev_areca.o dev_areca.cpp /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o smartd.o smartd.cpp ataidentify.cpp: In function 'void ata_print_identify_data(const void*, bool, int)': ataidentify.cpp:629:46: warning: left shift of negative value [-Wshift-negative-value] b = (w >> bit2) & ~(~0 << (bit-bit2+1)); ^ scsiata.cpp: In member function 'virtual bool sat::sat_device::ata_pass_through(const ata_cmd_in&, ata_cmd_out&)': scsiata.cpp:250:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (!ata_cmd_is_supported(in, ^~ scsiata.cpp:259:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' struct scsi_cmnd_io io_hdr; ^~~~~~ scsiprint.cpp: In function 'int scsiPrintMain(scsi_device*, const scsi_print_options&)': scsiprint.cpp:1943:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (scsiSmartEnable(device)) ^~ scsiprint.cpp:1945:13: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' any_output = true; ^~~~~~~~~~ scsiprint.cpp:1949:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (scsiSmartDisable(device)) ^~ scsiprint.cpp:1951:13: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' any_output = true; ^~~~~~~~~~ scsicmds.cpp: In function 'int scsiSetExceptionControlAndWarning(scsi_device*, int, const scsi_iec_mode_page*)': scsicmds.cpp:1453:13: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (iecp->gotChangeable && ^~ scsicmds.cpp:1456:17: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' rout[offset + 2] &= TEST_DISABLE;/* clear TEST bit for spec */ ^~~~ os_linux.cpp: In member function 'virtual bool os_linux::linux_aacraid_device::scsi_pass_through(scsi_cmnd_io*)': os_linux.cpp:973:5: warning: this 'for' clause does not guard... [-Wmisleading-indentation] for (k = 0; k < (int)iop->cmnd_len; ++k) ^~~ os_linux.cpp:975:7: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'for' if ((report > 1) && ^~ /bin/sh ./config.status --file=update-smart-drivedb /bin/sh ./config.status --file=smartd_warning.sh $(MAN_FILTER) < ./smartd.conf.5.in > smartd.conf.5 $(MAN_FILTER) < ./smartctl.8.in > smartctl.8 config.status: creating update-smart-drivedb $(MAN_FILTER) < ./smartd.8.in > smartd.8 config.status: creating smartd_warning.sh chmod +x update-smart-drivedb $(MAN_FILTER) < ./update-smart-drivedb.8.in > update-smart-drivedb.8 chmod +x smartd_warning.sh /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o utility.o utility.cpp atacmds.cpp:2781:1: warning: '{anonymous}::parsed_ata_device::~parsed_ata_device()' defined but not used [-Wunused-function] parsed_ata_device::~parsed_ata_device() throw() ^~~~~~~~~~~~~~~~~ atacmds.cpp:2771:1: warning: '{anonymous}::parsed_ata_device::parsed_ata_device(smart_interface*, const char*)' defined but not used [-Wunused-function] parsed_ata_device::parsed_ata_device(smart_interface * intf, const char * dev_name) ^~~~~~~~~~~~~~~~~ /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -o smartctl smartctl.o atacmdnames.o atacmds.o ataidentify.o ataprint.o dev_ata_cmd_set.o dev_interface.o knowndrives.o nvmecmds.o nvmeprint.o scsicmds.o scsiata.o scsiprint.o utility.o os_linux.o cciss.o dev_areca.o /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -o smartd smartd.o atacmdnames.o atacmds.o dev_ata_cmd_set.o dev_interface.o knowndrives.o nvmecmds.o scsicmds.o scsiata.o utility.o os_linux.o cciss.o dev_areca.o -lcap-ng >>> smartmontools 6.5 Installing to target PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-2/output/target install -C /home/peko/autobuild/instance-2/output/build/smartmontools-6.5/ /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/etc' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/sbin' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/sbin' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/etc/smartd_warning.d' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/share/doc/smartmontools' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/share/smartmontools' /usr/bin/install -c update-smart-drivedb '/home/peko/autobuild/instance-2/output/target/usr/sbin' /usr/bin/install -c smartctl smartd '/home/peko/autobuild/instance-2/output/target/usr/sbin' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/share/doc/smartmontools/examplescripts' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/share/doc/smartmontools/examplescripts' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/share/man/man5' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/share/man/man8' /usr/bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/etc' /usr/bin/install -c -m 644 './smartd.conf' '/home/peko/autobuild/instance-2/output/target/etc/smartd.conf' /usr/bin/install -c smartd_warning.sh '/home/peko/autobuild/instance-2/output/target/etc' /usr/bin/install -c -m 644 AUTHORS ChangeLog ChangeLog-5.0-6.0 COPYING INSTALL NEWS README TODO smartd.conf '/home/peko/autobuild/instance-2/output/target/usr/share/doc/smartmontools' /usr/bin/install -c -m 644 smartd.conf.5 '/home/peko/autobuild/instance-2/output/target/usr/share/man/man5' /usr/bin/install -c -m 644 smartctl.8 smartd.8 update-smart-drivedb.8 '/home/peko/autobuild/instance-2/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 drivedb.h '/home/peko/autobuild/instance-2/output/target/usr/share/smartmontools' /usr/bin/install -c examplescripts/Example1 examplescripts/Example2 examplescripts/Example3 examplescripts/Example4 examplescripts/Example5 examplescripts/Example6 '/home/peko/autobuild/instance-2/output/target/usr/share/doc/smartmontools/examplescripts' /usr/bin/install -c -m 644 examplescripts/README '/home/peko/autobuild/instance-2/output/target/usr/share/doc/smartmontools/examplescripts' wpa_supplicant-2.6.tar.gz: OK (sha256: b4936d34c4e6cdd44954beba74296d964bc2c9668ecaa5255e499636fe2b1450) rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch: OK (sha256: 529113cc81256c6178f3c1cf25dd8d3f33e6d770e4a180bd31c6ab7e4917f40b) rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch: OK (sha256: d86d47ab74170f3648b45b91bce780949ca92b09ab43df065178850ec0c335d7) rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch: OK (sha256: d4535e36739a0cc7f3585e6bcba3c0bb8fc67cb3e729844e448c5dc751f47e81) rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch: OK (sha256: 793a54748161b5af430dd9de4a1988d19cb8e85ab29bc2340f886b0297cee20b) rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch: OK (sha256: 596d4d3b63ea859ed7ea9791b3a21cb11b6173b04c0a14a2afa47edf1666afa6) rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch: OK (sha256: c5a17af84aec2d88c56ce0da2d6945be398fe7cab5c0c340deb30973900c2736) rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch: OK (sha256: c8840d857b9432f3b488113c85c1ff5d4a4b8d81078b7033388dae1e990843b1) >>> wpa_supplicant 2.6 Extracting gzip -d -c /home/peko/autobuild/instance-2/dl/wpa_supplicant-2.6.tar.gz | tar --strip-components=1 -C /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6 -xf - >>> wpa_supplicant 2.6 Patching PATH=/home/peko/autobuild/instance-2/output/host/bin:$PATH support/scripts/apply-patches.sh /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6 /home/peko/autobuild/instance-2/dl rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch Applying rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch using patch: patching file src/ap/ieee802_11.c patching file src/ap/wpa_auth.c patching file src/ap/wpa_auth.h patching file src/ap/wpa_auth_ft.c patching file src/ap/wpa_auth_i.h PATH=/home/peko/autobuild/instance-2/output/host/bin:$PATH support/scripts/apply-patches.sh /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6 /home/peko/autobuild/instance-2/dl rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch Applying rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch using patch: patching file src/common/wpa_common.h patching file src/rsn_supp/wpa.c patching file src/rsn_supp/wpa_i.h PATH=/home/peko/autobuild/instance-2/output/host/bin:$PATH support/scripts/apply-patches.sh /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6 /home/peko/autobuild/instance-2/dl rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch Applying rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch using patch: patching file src/rsn_supp/wpa.c patching file src/rsn_supp/wpa_i.h PATH=/home/peko/autobuild/instance-2/output/host/bin:$PATH support/scripts/apply-patches.sh /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6 /home/peko/autobuild/instance-2/dl rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch Applying rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch using patch: patching file src/common/wpa_common.h patching file src/rsn_supp/wpa.c patching file src/rsn_supp/wpa_i.h PATH=/home/peko/autobuild/instance-2/output/host/bin:$PATH support/scripts/apply-patches.sh /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6 /home/peko/autobuild/instance-2/dl rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch Applying rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch using patch: patching file src/rsn_supp/tdls.c PATH=/home/peko/autobuild/instance-2/output/host/bin:$PATH support/scripts/apply-patches.sh /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6 /home/peko/autobuild/instance-2/dl rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch Applying rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch using patch: patching file wpa_supplicant/wnm_sta.c PATH=/home/peko/autobuild/instance-2/output/host/bin:$PATH support/scripts/apply-patches.sh /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6 /home/peko/autobuild/instance-2/dl rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch Applying rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch using patch: patching file src/rsn_supp/wpa.c patching file src/rsn_supp/wpa_ft.c patching file src/rsn_supp/wpa_i.h >>> wpa_supplicant 2.6 Configuring cp /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6/wpa_supplicant/defconfig /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6/wpa_supplicant/.config sed -i -e 's/^#\(CONFIG_IEEE80211AC\)/\1/' -e 's/^#\(CONFIG_IEEE80211N\)/\1/' -e 's/^#\(CONFIG_IEEE80211R\)/\1/' -e 's/^#\(CONFIG_INTERNAL_LIBTOMMATH\)/\1/' -e 's/^#\(CONFIG_DEBUG_FILE\)/\1/' -e 's/^#\(CONFIG_MATCH_IFACE\)/\1/' -e 's/^\(CONFIG_SMARTCARD\)/#\1/' -e 's/^\(CONFIG_DRIVER_NL80211\)/#\1/' -e 's/^\(CONFIG_EAP\)/#\1/' -e 's/^\(CONFIG_EAP_PWD\)/#\1/' -e '1iCONFIG_BGSCAN_SIMPLE=y' -e 's/#\(CONFIG_TLS=\).*/\1internal/' /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6/wpa_supplicant/.config >>> wpa_supplicant 2.6 Building PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -I/home/peko/autobuild/instance-2/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/libnl3/" LDFLAGS="" BINDIR=/usr/sbin LIBS="" LIBS_c="" LIBS_p="" /usr/bin/make -j16 CC="/home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" -C /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6/wpa_supplicant CC eap_register.c CC ../src/utils/wpabuf.c CC ../src/utils/os_unix.c CC notify.c CC ../src/utils/wpa_debug.c CC ../src/rsn_supp/preauth.c CC ../src/rsn_supp/pmksa_cache.c CC ../src/utils/eloop.c CC ../src/rsn_supp/wpa_ft.c CC ../src/rsn_supp/wpa_ie.c CC wmm_ac.c CC ../src/eap_peer/eap_methods.c CC ../src/crypto/tls_none.c CC ../src/rsn_supp/peerkey.c CC ../src/utils/common.c CC ../src/crypto/crypto_internal.c CC ../src/crypto/aes-unwrap.c CC bss.c CC ../src/crypto/aes-internal.c CC ../src/crypto/aes-internal-dec.c CC ../src/crypto/aes-omac1.c CC ../src/crypto/md5.c CC config_file.c CC ../src/crypto/rc4.c CC ../src/crypto/aes-internal-enc.c CC ../src/crypto/sha256.c CC ../src/crypto/sha256-prf.c CC ../src/crypto/sha384-internal.c CC ../src/common/ctrl_iface_common.c CC ../src/crypto/sha256-internal.c CC ../src/crypto/md5-internal.c CC ../src/utils/base64.c CC ../src/crypto/sha512-internal.c CC ../src/crypto/random.c CC ../src/eap_common/eap_common.c CC ../src/crypto/sha1-pbkdf2.c CC ../src/crypto/sha1-prf.c CC ../src/common/wpa_common.c CC ../src/crypto/sha1.c CC ../src/eapol_supp/eapol_supp_sm.c CC ../src/common/hw_features_common.c CC bgscan.c CC bgscan_simple.c CC ../src/drivers/driver_common.c CC blacklist.c CC ../src/eap_peer/eap.c CC ../src/common/ieee802_11_common.c CC main.c CC ../src/drivers/netlink.c CC ../src/crypto/sha1-internal.c CC ../src/rsn_supp/wpa.c CC ctrl_iface_unix.c CC ../src/drivers/rfkill.c CC ../src/drivers/linux_ioctl.c In file included from ../src/l2_packet/l2_packet_linux.c:15:0: /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6/src/utils/common.h:426:0: warning: "__bitwise" redefined #define __bitwise In file included from /home/peko/autobuild/instance-2/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/linux/filter.h:10:0, from ../src/l2_packet/l2_packet_linux.c:13: /home/peko/autobuild/instance-2/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/linux/types.h:22:0: note: this is the location of the previous definition #define __bitwise __bitwise__ CC ../src/drivers/drivers.c sed systemd/wpa_supplicant.service.in sed systemd/wpa_supplicant.service.arg.in sed systemd/wpa_supplicant-nl80211.service.arg.in sed systemd/wpa_supplicant-wired.service.arg.in sed dbus/fi.epitest.hostap.WPASupplicant.service.in sed dbus/fi.w1.wpa_supplicant1.service.in CC ../src/drivers/driver_wired.c CC wpa_passphrase.c CC ../src/utils/edit_simple.c LD wpa_passphrase CC wpas_glue.c CC ../src/common/wpa_ctrl.c CC ../src/common/cli.c CC ../src/l2_packet/l2_packet_linux.c CC config.c CC ../src/drivers/driver_wext.c CC scan.c CC events.c CC wpa_cli.c LD wpa_cli CC ctrl_iface.c CC wpa_supplicant.c LD wpa_supplicant >>> wpa_supplicant 2.6 Installing to staging directory >>> wpa_supplicant 2.6 Fixing libtool files >>> wpa_supplicant 2.6 Installing to target /usr/bin/install -m 0755 -D /home/peko/autobuild/instance-2/output/build/wpa_supplicant-2.6/wpa_supplicant/wpa_supplicant /home/peko/autobuild/instance-2/output/target/usr/sbin/wpa_supplicant /usr/bin/install -m 644 -D package/wpa_supplicant/wpa_supplicant.conf /home/peko/autobuild/instance-2/output/target/etc/wpa_supplicant.conf >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/peko/autobuild/instance-2/output/build/packages-file-list.txt Warning: target file "./usr/share/info/dir" is touched by more than one package: ['diffutils', 'libffi'] ./support/scripts/check-uniq-files -t staging /home/peko/autobuild/instance-2/output/build/packages-file-list-staging.txt ./support/scripts/check-uniq-files -t host /home/peko/autobuild/instance-2/output/build/packages-file-list-host.txt Warning: host file "./libexec/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/collect2" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-linux-gcov-tool" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/libgcov.a" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/plugin/include/auto-host.h" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-buildroot-linux-uclibcgnueabi-gcov-dump" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/crtbegin.o" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/crtbeginS.o" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/install-tools/include/limits.h" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-linux-cpp.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-linux-gcov" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./share/info/dir" is touched by more than one package: ['host-lzip', 'host-binutils', 'host-m4', 'host-gmp', 'host-mpfr', 'host-mpc', 'host-gcc-initial', 'host-gcc-final', 'host-libtool', 'host-autoconf', 'host-automake'] Warning: host file "./libexec/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/lto-wrapper" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-buildroot-linux-uclibcgnueabi-cpp.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-buildroot-linux-uclibcgnueabi-gcov" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-buildroot-linux-uclibcgnueabi-gcov-tool" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/libgcc.a" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-buildroot-linux-uclibcgnueabi-gcc-6.4.0.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-linux-gcov-dump" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/plugin/include/configargs.h" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/include-fixed/limits.h" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-linux-gcc.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/arm-linux-gcc-6.4.0.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/crtfastmath.o" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/crtbeginT.o" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./libexec/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/lto1" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./libexec/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/cc1" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] PYTHONPATH="/home/peko/autobuild/instance-2/output/target/usr/lib/python3.6/" cd /home/peko/autobuild/instance-2/output/target && /home/peko/autobuild/instance-2/output/host/bin/python3.6 /home/peko/autobuild/instance-2/buildroot/support/scripts/pycompile.py usr/lib/python3.6 find /home/peko/autobuild/instance-2/output/target/usr/lib/python3.6 -name '*.py' -print0 | xargs -0 --no-run-if-empty rm -f find /home/peko/autobuild/instance-2/output/target/usr/lib/python3.6 -name '*.opt-1.pyc' -print0 -o -name '*.opt-2.pyc' -print0 | xargs -0 --no-run-if-empty rm -f mkdir -p /home/peko/autobuild/instance-2/output/target/etc echo "buildroot" > /home/peko/autobuild/instance-2/output/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/peko/autobuild/instance-2/output/target/etc/hosts mkdir -p /home/peko/autobuild/instance-2/output/target/etc echo "Welcome to Buildroot" > /home/peko/autobuild/instance-2/output/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root::, /home/peko/autobuild/instance-2/output/target/etc/shadow rm -f /home/peko/autobuild/instance-2/output/target/bin/sh rm -f /home/peko/autobuild/instance-2/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/peko/autobuild/instance-2/output/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/peko/autobuild/instance-2/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/peko/autobuild/instance-2/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/peko/autobuild/instance-2/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/peko/autobuild/instance-2/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/peko/autobuild/instance-2/output/target/usr/include /home/peko/autobuild/instance-2/output/target/usr/share/aclocal \ /home/peko/autobuild/instance-2/output/target/usr/lib/pkgconfig /home/peko/autobuild/instance-2/output/target/usr/share/pkgconfig \ /home/peko/autobuild/instance-2/output/target/usr/lib/cmake /home/peko/autobuild/instance-2/output/target/usr/share/cmake find /home/peko/autobuild/instance-2/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/peko/autobuild/instance-2/output/target/lib/ /home/peko/autobuild/instance-2/output/target/usr/lib/ /home/peko/autobuild/instance-2/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: '/home/peko/autobuild/instance-2/output/target/usr/libexec/': No such file or directory rm -rf /home/peko/autobuild/instance-2/output/target/usr/share/gdb rm -rf /home/peko/autobuild/instance-2/output/target/usr/share/bash-completion rm -rf /home/peko/autobuild/instance-2/output/target/usr/share/zsh rm -rf /home/peko/autobuild/instance-2/output/target/usr/man /home/peko/autobuild/instance-2/output/target/usr/share/man rm -rf /home/peko/autobuild/instance-2/output/target/usr/info /home/peko/autobuild/instance-2/output/target/usr/share/info rm -rf /home/peko/autobuild/instance-2/output/target/usr/doc /home/peko/autobuild/instance-2/output/target/usr/share/doc rm -rf /home/peko/autobuild/instance-2/output/target/usr/share/gtk-doc rmdir /home/peko/autobuild/instance-2/output/target/usr/share 2>/dev/null || true find /home/peko/autobuild/instance-2/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/peko/autobuild/instance-2/output/target/lib/ -type f -name 'libpthread*.so*' | \ xargs -r /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip --remove-section=.comment --remove-section=.note --strip-debug find /home/peko/autobuild/instance-2/output/target/lib/ -type f -name 'ld-*.so*' | \ xargs -r /home/peko/autobuild/instance-2/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip --remove-section=.comment --remove-section=.note --strip-debug test -f /home/peko/autobuild/instance-2/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/peko/autobuild/instance-2/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/peko/autobuild/instance-2/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2018.02-git-01569-g18c9cda"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2018.02-git"; \ echo "PRETTY_NAME=\"Buildroot 2018.02-git\"" \ ) > /home/peko/autobuild/instance-2/output/target/etc/os-release >>> Sanitizing RPATH in target tree /home/peko/autobuild/instance-2/buildroot/support/scripts/fix-rpath target make: Leaving directory `/home/peko/autobuild/instance-2/buildroot' make: Entering directory `/home/peko/autobuild/instance-2/buildroot' >>> Buildroot 2018.02-git-01569-g18c9cda Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> host-lzip 1.19 Collecting legal info ERROR: No hash found for COPYING >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 6.4.0 Collecting legal info >>> host-binutils 2.28.1 Collecting legal info ERROR: No hash found for COPYING3 ERROR: No hash found for COPYING.LIB >>> host-gmp 6.1.2 Collecting legal info ERROR: No hash found for COPYING.LESSERv3 ERROR: No hash found for COPYINGv2 >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-mpc 1.0.3 Collecting legal info ERROR: No hash found for COPYING.LESSER >>> host-mpfr 3.1.6 Collecting legal info ERROR: No hash found for COPYING.LESSER >>> uclibc 1.0.27 Collecting legal info ERROR: No hash found for COPYING.LIB >>> host-gcc-initial 6.4.0 Collecting legal info >>> linux-headers 4.14.7 Collecting legal info WARNING: no hash file for COPYING >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> diffutils 3.6 Collecting legal info ERROR: No hash found for COPYING >>> gadgetfs-test Collecting legal info >>> gauche 0.9.5 Collecting legal info ERROR: No hash found for COPYING >>> host-gauche 0.9.5 Collecting legal info ERROR: No hash found for COPYING >>> libcap-ng 0.7.8 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING.LIB >>> libffi 3.2.1 Collecting legal info LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5) >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> openpgm release-5-2-122 Collecting legal info ERROR: No hash found for openpgm/pgm/LICENSE >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> python3 3.6.3 Collecting legal info ERROR: No hash found for LICENSE >>> host-python3 3.6.3 Collecting legal info ERROR: No hash found for LICENSE >>> host-expat 2.2.5 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-pkgconf 0.9.12 Collecting legal info ERROR: No hash found for COPYING >>> host-zlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> setserial 2.17 Collecting legal info ERROR: No hash found for debian/copyright >>> smartmontools 6.5 Collecting legal info ERROR: No hash found for COPYING >>> wpa_supplicant 2.6 Collecting legal info ERROR: No hash found for README WARNING: the Buildroot source code has not been saved WARNING: gcc-final-6.4.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-6.4.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: gadgetfs-test: cannot save license (GADGETFS_TEST_LICENSE_FILES not defined) Legal info produced in /home/peko/autobuild/instance-2/output/legal-info make: Leaving directory `/home/peko/autobuild/instance-2/buildroot'