>>> gnuplot 6.0.0 Downloading wget --passive-ftp -nd -t 3 -O '/home/autobuild/autobuild/instance-40/output-1/build/.gnuplot-6.0.0.tar.gz.cizA8N/output' 'http://downloads.sourceforge.net/project/gnuplot/gnuplot/6.0.0/gnuplot-6.0.0.tar.gz' URL transformed to HTTPS due to an HSTS policy --2024-06-02 07:23:03-- https://downloads.sourceforge.net/project/gnuplot/gnuplot/6.0.0/gnuplot-6.0.0.tar.gz Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt' Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 204.68.111.105 Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|204.68.111.105|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://psychz.dl.sourceforge.net/project/gnuplot/gnuplot/6.0.0/gnuplot-6.0.0.tar.gz?viasf=1 [following] --2024-06-02 07:23:03-- https://psychz.dl.sourceforge.net/project/gnuplot/gnuplot/6.0.0/gnuplot-6.0.0.tar.gz?viasf=1 Resolving psychz.dl.sourceforge.net (psychz.dl.sourceforge.net)... 208.87.241.191 Connecting to psychz.dl.sourceforge.net (psychz.dl.sourceforge.net)|208.87.241.191|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 7522870 (7.2M) [application/x-gzip] Saving to: '/home/autobuild/autobuild/instance-40/output-1/build/.gnuplot-6.0.0.tar.gz.cizA8N/output' 0K .......... .......... .......... .......... .......... 0% 934K 8s 50K .......... .......... .......... .......... .......... 1% 470K 12s 100K .......... .......... .......... .......... .......... 2% 255M 8s 150K .......... .......... .......... .......... .......... 2% 944K 8s 200K .......... .......... .......... .......... .......... 3% 64.1M 6s 250K .......... .......... .......... .......... .......... 4% 378M 5s 300K .......... .......... .......... .......... .......... 4% 957K 5s 350K .......... .......... .......... .......... .......... 5% 129M 5s 400K .......... .......... .......... .......... .......... 6% 144M 4s 450K .......... .......... .......... .......... .......... 6% 55.2M 4s 500K .......... .......... .......... .......... .......... 7% 390M 3s 550K .......... .......... .......... .......... .......... 8% 163M 3s 600K .......... .......... .......... .......... .......... 8% 980K 3s 650K .......... .......... .......... .......... .......... 9% 152M 3s 700K .......... .......... .......... .......... .......... 10% 93.8M 3s 750K .......... .......... .......... .......... .......... 10% 121M 3s 800K .......... .......... .......... .......... .......... 11% 93.8M 2s 850K .......... .......... .......... .......... .......... 12% 78.7M 2s 900K .......... .......... .......... .......... .......... 12% 334M 2s 950K .......... .......... .......... .......... .......... 13% 81.1M 2s 1000K .......... .......... .......... .......... .......... 14% 108M 2s 1050K .......... .......... .......... .......... .......... 14% 223M 2s 1100K .......... .......... .......... .......... .......... 15% 122M 2s 1150K .......... .......... .......... .......... .......... 16% 1.34M 2s 1200K .......... .......... .......... .......... .......... 17% 3.90M 2s 1250K .......... .......... .......... .......... .......... 17% 86.0M 2s 1300K .......... .......... .......... .......... .......... 18% 351M 2s 1350K .......... .......... .......... .......... .......... 19% 110M 2s 1400K .......... .......... .......... .......... .......... 19% 118M 2s 1450K .......... .......... .......... .......... .......... 20% 142M 1s 1500K .......... .......... .......... .......... .......... 21% 108M 1s 1550K .......... .......... .......... .......... .......... 21% 95.8M 1s 1600K .......... .......... .......... .......... .......... 22% 82.3M 1s 1650K .......... .......... .......... .......... .......... 23% 135M 1s 1700K .......... .......... .......... .......... .......... 23% 82.2M 1s 1750K .......... .......... .......... .......... .......... 24% 143M 1s 1800K .......... .......... .......... .......... .......... 25% 210M 1s 1850K .......... .......... .......... .......... .......... 25% 44.8M 1s 1900K .......... .......... .......... .......... .......... 26% 442M 1s 1950K .......... .......... .......... .......... .......... 27% 197M 1s 2000K .......... .......... .......... .......... .......... 27% 101M 1s 2050K .......... .......... .......... .......... .......... 28% 108M 1s 2100K .......... .......... .......... .......... .......... 29% 155M 1s 2150K .......... .......... .......... .......... .......... 29% 92.1M 1s 2200K .......... .......... .......... .......... .......... 30% 181M 1s 2250K .......... .......... .......... .......... .......... 31% 95.5M 1s 2300K .......... .......... .......... .......... .......... 31% 143M 1s 2350K .......... .......... .......... .......... .......... 32% 1.56M 1s 2400K .......... .......... .......... .......... .......... 33% 3.49M 1s 2450K .......... .......... .......... .......... .......... 34% 224M 1s 2500K .......... .......... .......... .......... .......... 34% 341M 1s 2550K .......... .......... .......... .......... .......... 35% 326M 1s 2600K .......... .......... .......... .......... .......... 36% 297M 1s 2650K .......... .......... .......... .......... .......... 36% 291M 1s 2700K .......... .......... .......... .......... .......... 37% 293M 1s 2750K .......... .......... .......... .......... .......... 38% 76.9M 1s 2800K .......... .......... .......... .......... .......... 38% 109M 1s 2850K .......... .......... .......... .......... .......... 39% 58.5M 1s 2900K .......... .......... .......... .......... .......... 40% 377M 1s 2950K .......... .......... .......... .......... .......... 40% 219M 1s 3000K .......... .......... .......... .......... .......... 41% 134M 1s 3050K .......... .......... .......... .......... .......... 42% 113M 1s 3100K .......... .......... .......... .......... .......... 42% 112M 1s 3150K .......... .......... .......... .......... .......... 43% 74.6M 1s 3200K .......... .......... .......... .......... .......... 44% 160M 1s 3250K .......... .......... .......... .......... .......... 44% 107M 1s 3300K .......... .......... .......... .......... .......... 45% 127M 1s 3350K .......... .......... .......... .......... .......... 46% 78.3M 1s 3400K .......... .......... .......... .......... .......... 46% 201M 0s 3450K .......... .......... .......... .......... .......... 47% 115M 0s 3500K .......... .......... .......... .......... .......... 48% 127M 0s 3550K .......... .......... .......... .......... .......... 49% 86.3M 0s 3600K .......... .......... .......... .......... .......... 49% 112M 0s 3650K .......... .......... .......... .......... .......... 50% 39.6M 0s 3700K .......... .......... .......... .......... .......... 51% 305M 0s 3750K .......... .......... .......... .......... .......... 51% 402M 0s 3800K .......... .......... .......... .......... .......... 52% 100M 0s 3850K .......... .......... .......... .......... .......... 53% 340M 0s 3900K .......... .......... .......... .......... .......... 53% 130M 0s 3950K .......... .......... .......... .......... .......... 54% 55.9M 0s 4000K .......... .......... .......... .......... .......... 55% 387M 0s 4050K .......... .......... .......... .......... .......... 55% 41.0M 0s 4100K .......... .......... .......... .......... .......... 56% 279M 0s 4150K .......... .......... .......... .......... .......... 57% 344M 0s 4200K .......... .......... .......... .......... .......... 57% 387M 0s 4250K .......... .......... .......... .......... .......... 58% 81.0M 0s 4300K .......... .......... .......... .......... .......... 59% 212M 0s 4350K .......... .......... .......... .......... .......... 59% 30.4M 0s 4400K .......... .......... .......... .......... .......... 60% 455K 0s 4450K .......... .......... .......... .......... .......... 61% 348M 0s 4500K .......... .......... .......... .......... .......... 61% 421M 0s 4550K .......... .......... .......... .......... .......... 62% 415M 0s 4600K .......... .......... .......... .......... .......... 63% 437M 0s 4650K .......... .......... .......... .......... .......... 63% 379M 0s 4700K .......... .......... .......... .......... .......... 64% 387M 0s 4750K .......... .......... .......... .......... .......... 65% 300M 0s 4800K .......... .......... .......... .......... .......... 66% 374M 0s 4850K .......... .......... .......... .......... .......... 66% 384M 0s 4900K .......... .......... .......... .......... .......... 67% 411M 0s 4950K .......... .......... .......... .......... .......... 68% 405M 0s 5000K .......... .......... .......... .......... .......... 68% 395M 0s 5050K .......... .......... .......... .......... .......... 69% 368M 0s 5100K .......... .......... .......... .......... .......... 70% 377M 0s 5150K .......... .......... .......... .......... .......... 70% 284M 0s 5200K .......... .......... .......... .......... .......... 71% 376M 0s 5250K .......... .......... .......... .......... .......... 72% 404M 0s 5300K .......... .......... .......... .......... .......... 72% 405M 0s 5350K .......... .......... .......... .......... .......... 73% 404M 0s 5400K .......... .......... .......... .......... .......... 74% 405M 0s 5450K .......... .......... .......... .......... .......... 74% 401M 0s 5500K .......... .......... .......... .......... .......... 75% 381M 0s 5550K .......... .......... .......... .......... .......... 76% 288M 0s 5600K .......... .......... .......... .......... .......... 76% 401M 0s 5650K .......... .......... .......... .......... .......... 77% 380M 0s 5700K .......... .......... .......... .......... .......... 78% 412M 0s 5750K .......... .......... .......... .......... .......... 78% 349M 0s 5800K .......... .......... .......... .......... .......... 79% 398M 0s 5850K .......... .......... .......... .......... .......... 80% 406M 0s 5900K .......... .......... .......... .......... .......... 80% 380M 0s 5950K .......... .......... .......... .......... .......... 81% 328M 0s 6000K .......... .......... .......... .......... .......... 82% 391M 0s 6050K .......... .......... .......... .......... .......... 83% 393M 0s 6100K .......... .......... .......... .......... .......... 83% 392M 0s 6150K .......... .......... .......... .......... .......... 84% 369M 0s 6200K .......... .......... .......... .......... .......... 85% 401M 0s 6250K .......... .......... .......... .......... .......... 85% 383M 0s 6300K .......... .......... .......... .......... .......... 86% 403M 0s 6350K .......... .......... .......... .......... .......... 87% 304M 0s 6400K .......... .......... .......... .......... .......... 87% 375M 0s 6450K .......... .......... .......... .......... .......... 88% 395M 0s 6500K .......... .......... .......... .......... .......... 89% 391M 0s 6550K .......... .......... .......... .......... .......... 89% 418M 0s 6600K .......... .......... .......... .......... .......... 90% 424M 0s 6650K .......... .......... .......... .......... .......... 91% 391M 0s 6700K .......... .......... .......... .......... .......... 91% 439M 0s 6750K .......... .......... .......... .......... .......... 92% 315M 0s 6800K .......... .......... .......... .......... .......... 93% 406M 0s 6850K .......... .......... .......... .......... .......... 93% 376M 0s 6900K .......... .......... .......... .......... .......... 94% 393M 0s 6950K .......... .......... .......... .......... .......... 95% 390M 0s 7000K .......... .......... .......... .......... .......... 95% 391M 0s 7050K .......... .......... .......... .......... .......... 96% 348M 0s 7100K .......... .......... .......... .......... .......... 97% 372M 0s 7150K .......... .......... .......... .......... .......... 98% 277M 0s 7200K .......... .......... .......... .......... .......... 98% 386M 0s 7250K .......... .......... .......... .......... .......... 99% 371M 0s 7300K .......... .......... .......... .......... ...... 100% 355M=0.6s 2024-06-02 07:23:06 (12.8 MB/s) - '/home/autobuild/autobuild/instance-40/output-1/build/.gnuplot-6.0.0.tar.gz.cizA8N/output' saved [7522870/7522870] gnuplot-6.0.0.tar.gz: OK (md5: 10246eb96bbf3a151d6eb9bbcc223e4e) gnuplot-6.0.0.tar.gz: OK (sha1: 3abea0cccad89b0c8fb6619ad51b83a971ee24b9) gnuplot-6.0.0.tar.gz: OK (sha256: 635a28f0993f6ab0d1179e072ad39b8139d07f51237f841d93c6c2ff4b1758ec) >>> gnuplot 6.0.0 Extracting gzip -d -c /home/autobuild/autobuild/instance-40/dl/gnuplot/gnuplot-6.0.0.tar.gz | tar --strip-components=1 -C /home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0 -xf - >>> gnuplot 6.0.0 Patching Applying 0001-configure-add-without-demo-option.patch using patch: patching file configure.ac patching file Makefile.am >>> gnuplot 6.0.0 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0 -name $file); do cp support/gnuconfig/$file $i; done; done >>> gnuplot 6.0.0 Configuring >>> gnuplot 6.0.0 Autoreconfiguring >>> gnuplot 6.0.0 Patching libtool (cd /home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/ && rm -rf config.cache && GIT_DIR=. PATH="/home/autobuild/autobuild/instance-40/output-1/host/bin:/home/autobuild/autobuild/instance-40/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" AR="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc-ar" AS="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-as" LD="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-ld" NM="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc-nm" CC="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc" GCC="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc" CPP="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-cpp" CXX="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-g++" FC="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gfortran" F77="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gfortran" RANLIB="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc-ranlib" READELF="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-readelf" STRIP="/bin/true" OBJCOPY="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-objcopy" OBJDUMP="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/autobuild/autobuild/instance-40/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-40/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-40/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/autobuild/autobuild/instance-40/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-40/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-as" DEFAULT_LINKER="/home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1" LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/autobuild/autobuild/instance-40/output-1/host/bin/pkg-config" STAGING_DIR="/home/autobuild/autobuild/instance-40/output-1/host/mips64-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CONFIG_SITE=/dev/null ./configure --target=mips64-buildroot-linux-gnu --host=mips64-buildroot-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --without-x --disable-raise-console --disable-mouse --without-tutorial --disable-demo --without-row-help --disable-history-file --disable-wxwidgets --without-lua --without-latex --without-cairo --without-qt --without-gd --with-readline=gnu ) checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for mips64-buildroot-linux-gnu-strip... /bin/true checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports the include directive... yes (GNU style) checking for mips64-buildroot-linux-gnu-gcc... /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc accepts -g... yes checking for /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc option to enable C11 features... none needed checking whether /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc understands -c and -o together... yes checking dependency style of /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking for sys/select.h... yes checking for sys/socket.h... yes checking for vfork.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for mips64-buildroot-linux-gnu-gcc... (cached) /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc checking whether the compiler supports GNU C... (cached) yes checking whether /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc accepts -g... (cached) yes checking for /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc option to enable C11 features... (cached) none needed checking whether /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc understands -c and -o together... (cached) yes checking dependency style of /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc... (cached) none checking how to run the C preprocessor... /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-cpp checking for mips64-buildroot-linux-gnu-gcc... mips64-buildroot-linux-gnu-gcc checking whether the compiler supports GNU Objective C... no checking whether mips64-buildroot-linux-gnu-gcc accepts -g... no checking dependency style of mips64-buildroot-linux-gnu-gcc... none checking for an ANSI C-conforming const... yes checking for inline... inline checking whether ln -s works... yes checking for off_t... yes checking for declarations of fseeko and ftello... yes checking for /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc option to enable large file support... none needed checking for struct tm.tm_gmtoff... yes checking for struct tm.__tm_gmtoff... no checking pkg-config is at least version 0.9.0... yes checking for LIBCERF... configure: WARNING: Package requirements (libcerf) were not met: Package 'libcerf', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBCERF_CFLAGS and LIBCERF_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. checking for library containing cdawson... no checking for amos libraries using LDFLAGS: ... checking for library containing zairy_... no checking for library containing cexint_... no checking for emacs... no checking for xemacs... no checking for dvips... dvips checking for kpsewhich... kpsewhich checking for texhash... texhash checking for X... disabled checking for egrep -e... /usr/bin/grep -E checking for MS-DOS/djgpp/libGRX... no checking for Mac OS X... no checking for BeOS... no checking for Alpha/AXP CPU... no checking for sin... no checking for sin in -lm... yes checking for dirent.h... yes checking for errno.h... yes checking for float.h... yes checking for langinfo.h... yes checking for limits.h... yes checking for locale.h... yes checking for math.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for time.h... yes checking for sys/time.h... yes checking for sys/types.h... (cached) yes checking for sys/bsdtypes.h... no checking for sys/ioctl.h... yes checking for sys/param.h... yes checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking for sys/stat.h... (cached) yes checking for sys/systeminfo.h... no checking for sys/timeb.h... yes checking for sys/utsname.h... yes checking for libc.h... no checking for malloc.h... yes checking for poll.h... yes checking for sgtty.h... yes checking for termios.h... yes checking for values.h... yes checking for dirent.h... (cached) yes checking for inttypes.h... (cached) yes checking for dlfcn.h... yes checking for dl.h... no checking for _Bool... yes checking for stdbool.h that conforms to C99 or later... yes checking whether stat file-mode macros are broken... no checking for sys/wait.h that is POSIX.1 compatible... yes checking for library containing dlopen... none required checking for unistd.h... yes checking if errno variable is declared... yes checking for size_t... yes checking for time_t in time.h... yes checking for atexit... yes checking for memcpy... yes checking for memmove... yes checking for memset... yes checking for on_exit... yes checking for bcopy... yes checking for bzero... yes checking for setvbuf... yes checking for strerror... yes checking for strchr... yes checking for strrchr... yes checking for strstr... yes checking for index... yes checking for rindex... yes checking for erf... yes checking for erfc... yes checking for gamma... yes checking for lgamma... yes checking for tgamma... yes checking for getcwd... yes checking for poll... yes checking for pclose... yes checking for popen... yes checking for fdopen... yes checking for select... yes checking for sleep... yes checking for stpcpy... yes checking for strcspn... yes checking for strdup... yes checking for strndup... yes checking for strnlen... yes checking for strcasecmp... yes checking for stricmp... no checking for strncasecmp... yes checking for strnicmp... no checking for sysinfo... yes checking for tcgetattr... yes checking for vfprintf... yes checking for doprnt... no checking for uname... yes checking for usleep... yes checking for cbrt... yes checking for jn... yes checking for /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc options needed to detect all undeclared functions... none needed checking whether signgam is declared... yes checking for complex.h... yes checking for csqrt... yes checking for cexp... yes checking for cabs... yes checking for clog... yes checking for fenv.h... yes checking for sigsetjmp... yes checking if malloc(0) returns 0... yes checking types of arguments for select... int,fd_set *,struct timeval * checking for tputs in -lncurses... yes checking for remove_history in -lreadline... yes checking for library containing rl_ding... -lreadline checking for library containing rl_forced_update_display... none required checking for library containing rl_reset_after_signal... none required checking for library containing _rl_signal_handler... none required checking for library containing rl_pending_signal... none required checking for library containing rl_complete_with_tilde_expansion... none required checking for readline/readline.h... yes checking for readline/history.h... yes checking for mergesort... no checking for gnu_get_libc_version... yes checking for deflate in -lz... yes checking for zlib.h... yes checking for library containing iconv_open... none required checking for iconv.h... yes checking for multi-byte support in x11... checking for XmbDrawString in -lX11... no checking whether the compiler supports GNU C++... no checking whether no accepts -g... no checking for no option to enable C++11 features... unsupported checking for no option to enable C++98 features... unsupported checking dependency style of no... none ./configure: line 16856: Enable: command not found checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config/Makefile config.status: creating demo/Makefile config.status: creating demo/plugin/Makefile config.status: creating docs/Makefile config.status: creating m4/Makefile config.status: creating man/Makefile config.status: creating man/ja/Makefile config.status: creating share/Makefile config.status: creating share/LaTeX/Makefile config.status: creating src/Makefile config.status: creating src/beos/Makefile config.status: creating src/wxterminal/Makefile config.status: creating src/qtterminal/Makefile config.status: creating term/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing default commands ** Configuration summary for gnuplot 6.0.0: gnuplot will be compiled with the following terminals: Standalone terminals: yes (included by default) canvas cgm context dumb dxf emf epslatex fig hpgl pcl5 postscript pict2e pslatex pstex pstricks svg texdraw tkcanvas Dot-matrix terminals: no (use --with-bitmap-terminals to enable) These would include, if enabled printers: epson nec okidata tandy seiko dpu414 hp500c hpdj hpljii hppj starc other: block pbm Tektronix terminal emulators: yes ( --without-tektronix to disable) tek410x tek40 vttek xterm kc_tek40 km_tek40 selanar bitgraph sixeltek (not needed for sixel graphics output to vt100-series emulators) Platform-specific, legacy, or specialized terminals omitted by default: gpic : no (use --with-gpic to enable) tgif : no (use --with-tgif to enable) metafont : no (use --with-metafont to enable) metapost : no (use --with-metapost to enable) ReGIS : no (use --with-regis to enable) caca : no (use --with-caca to enable) aqua : no (macOS only) Other terminals that can be enabled but have no ./configure option: eepic, emtex, hp2623a, hp2648, imagen, kyocera, latex, mif, tpic qms, pm (makefile.os2), be (BeOS), svga (MSDOS/djgpp), windows x11 (X Window System) : no (requires X libraries) libgd-based png jpeg gif sixel: no (requires libgd, see config.log) cairo-based terminals: no (requires cairo>=1.2, pango>=1.22, glib>=2.28) webp : no (requires cairo, pango, libwebp, libwebpmux) lua/TikZ : no wxt : no (requires C++, wxWidgets>2.6, cairo>0.9, pango>1.22) Qt : no (use --with-qt or --with-qt=qt4 or --with-qt=qt5 to enable gnuplot will be compiled with the following configurable features: Readline library: GNU readline library with -lncurses Command-line history file: no Add code to ensure pm3d depth sorting is stable: no (not needed) Mouse support in interactive terminals: no Typing in plot window raises console: no cerf() and other special functions: no (libcerf not found) Complex Airy and Bessel functions: no (requires libopenspec or libamos Complex exponential integral cexint (libamos): no plugin support for loading external functions: yes Allow deprecated syntax: no Statistical summary of data ("stats" command): yes Support watchpoints during 2D plotting: yes Support for polar gridded surfaces: yes Support function blocks: yes Support concave hulls: yes gnuplot will install the following additional materials: TeX files will not be installed PostScript prologue files: ${datarootdir}/gnuplot/6.0/PostScript/ Help file: ${datarootdir}/gnuplot/6.0/gnuplot.gih >>> gnuplot 6.0.0 Building GIT_DIR=. PATH="/home/autobuild/autobuild/instance-40/output-1/host/bin:/home/autobuild/autobuild/instance-40/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /usr/bin/make -j1 -C /home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/ make[1]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0' /usr/bin/make all-recursive make[2]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0' Making all in config make[3]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/config' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/config' Making all in m4 make[3]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/m4' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/m4' Making all in term make[3]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/term' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/term' Making all in src make[3]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src' Making timestamp.h fatal: not a git repository: '../.git' /usr/bin/make all-recursive make[4]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src' Making all in wxterminal make[5]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src/wxterminal' make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src/wxterminal' Making all in qtterminal make[5]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src/qtterminal' make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src/qtterminal' make[5]: Entering directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src' /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o alloc.o alloc.c /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o amos_airy.o amos_airy.c /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o axis.o axis.c /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o breaders.o breaders.c /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o boundary.o boundary.c /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o color.o color.c /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o command.o command.c /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o contour.o contour.c /home/autobuild/autobuild/instance-40/output-1/host/bin/mips64-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -c -o complexfun.o complexfun.c complexfun.c: In function 'Igamma': complexfun.c:92:26: error: 'FE_UNDERFLOW' undeclared (first use in this function) 92 | if (fetestexcept(FE_UNDERFLOW)) { \ | ^~~~~~~~~~~~ complexfun.c:541:5: note: in expansion of macro 'handle_underflow' 541 | handle_underflow("Igamma", arg); | ^~~~~~~~~~~~~~~~ complexfun.c:92:26: note: each undeclared identifier is reported only once for each function it appears in 92 | if (fetestexcept(FE_UNDERFLOW)) { \ | ^~~~~~~~~~~~ complexfun.c:541:5: note: in expansion of macro 'handle_underflow' 541 | handle_underflow("Igamma", arg); | ^~~~~~~~~~~~~~~~ make[5]: *** [Makefile:1034: complexfun.o] Error 1 make[5]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src' make[4]: *** [Makefile:1088: all-recursive] Error 1 make[4]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src' make[3]: *** [Makefile:732: all] Error 2 make[3]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/src' make[2]: *** [Makefile:428: all-recursive] Error 1 make[2]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0' make[1]: *** [Makefile:367: all] Error 2 make[1]: Leaving directory '/home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0' make: *** [package/pkg-generic.mk:283: /home/autobuild/autobuild/instance-40/output-1/build/gnuplot-6.0.0/.stamp_built] Error 2 make: Leaving directory '/home/autobuild/autobuild/instance-40/buildroot'