make[3]: Entering directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/peko/autobuild/instance-0/output/host/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/peko/autobuild/instance-0/output/host/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/peko/autobuild/instance-0/output/host/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/peko/autobuild/instance-0/output/host/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/peko/autobuild/instance-0/output/host/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/peko/autobuild/instance-0/output/host/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_lba_status /home/peko/autobuild/instance-0/output/host/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/peko/autobuild/instance-0/output/host/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/peko/autobuild/instance-0/output/host/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/peko/autobuild/instance-0/output/host/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/peko/autobuild/instance-0/output/host/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/peko/autobuild/instance-0/output/host/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/peko/autobuild/instance-0/output/host/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/peko/autobuild/instance-0/output/host/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/peko/autobuild/instance-0/output/host/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/peko/autobuild/instance-0/output/host/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/peko/autobuild/instance-0/output/host/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/peko/autobuild/instance-0/output/host/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/peko/autobuild/instance-0/output/host/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/peko/autobuild/instance-0/output/host/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/peko/autobuild/instance-0/output/host/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/peko/autobuild/instance-0/output/host/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/peko/autobuild/instance-0/output/host/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/peko/autobuild/instance-0/output/host/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/peko/autobuild/instance-0/output/host/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/peko/autobuild/instance-0/output/host/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/peko/autobuild/instance-0/output/host/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/peko/autobuild/instance-0/output/host/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/peko/autobuild/instance-0/output/host/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/peko/autobuild/instance-0/output/host/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/peko/autobuild/instance-0/output/host/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/peko/autobuild/instance-0/output/host/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/peko/autobuild/instance-0/output/host/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/peko/autobuild/instance-0/output/host/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/peko/autobuild/instance-0/output/host/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/peko/autobuild/instance-0/output/host/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/peko/autobuild/instance-0/output/host/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/peko/autobuild/instance-0/output/host/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/peko/autobuild/instance-0/output/host/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/peko/autobuild/instance-0/output/host/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/peko/autobuild/instance-0/output/host/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/peko/autobuild/instance-0/output/host/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/peko/autobuild/instance-0/output/host/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/peko/autobuild/instance-0/output/host/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/peko/autobuild/instance-0/output/host/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/peko/autobuild/instance-0/output/host/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/peko/autobuild/instance-0/output/host/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/peko/autobuild/instance-0/output/host/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/peko/autobuild/instance-0/output/host/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/peko/autobuild/instance-0/output/host/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/peko/autobuild/instance-0/output/host/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/peko/autobuild/instance-0/output/host/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/peko/autobuild/instance-0/output/host/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/peko/autobuild/instance-0/output/host/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/peko/autobuild/instance-0/output/host/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/peko/autobuild/instance-0/output/host/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/peko/autobuild/instance-0/output/host/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/peko/autobuild/instance-0/output/host/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/peko/autobuild/instance-0/output/host/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/peko/autobuild/instance-0/output/host/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/peko/autobuild/instance-0/output/host/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/peko/autobuild/instance-0/output/host/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/peko/autobuild/instance-0/output/host/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/peko/autobuild/instance-0/output/host/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/peko/autobuild/instance-0/output/host/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/peko/autobuild/instance-0/output/host/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/peko/autobuild/instance-0/output/host/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/peko/autobuild/instance-0/output/host/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/peko/autobuild/instance-0/output/host/bin/sgp_dd make[3]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/src' make[2]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/src' Making install in doc make[2]: Entering directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/doc' make[3]: Entering directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 '/home/peko/autobuild/instance-0/output/host/share/man/man8' /usr/bin/install -c -m 644 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/peko/autobuild/instance-0/output/host/share/man/man8' make[3]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/doc' make[2]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/doc' Making install in scripts make[2]: Entering directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/scripts' make[3]: Entering directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/peko/autobuild/instance-0/output/host/bin' make[3]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/scripts' make[2]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44/scripts' make[2]: Entering directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44' make[3]: Entering directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44' make[2]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44' make[1]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-sg3_utils-1.44' utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz: OK (sha256: 8b5ba0058a78de69faf6822bb10b457fff2f9e55dc112ccb81c35214b061c6e6) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Extracting gzip -d -c /home/peko/autobuild/instance-0/dl/utp_com/utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz | tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 -xf - >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Patching >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Configuring >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/home/peko/bin:/home/peko/bin" PKG_CONFIG="/home/peko/autobuild/instance-0/output/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/peko/autobuild/instance-0/output/host/lib/pkgconfig:/home/peko/autobuild/instance-0/output/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/peko/autobuild/instance-0/output/host/include" CFLAGS="-O2 -I/home/peko/autobuild/instance-0/output/host/include" CXXFLAGS="-O2 -I/home/peko/autobuild/instance-0/output/host/include" LDFLAGS="-L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j6 -C /home/peko/autobuild/instance-0/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 make[1]: Entering directory '/home/peko/autobuild/instance-0/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' /usr/bin/gcc -c -o utp_com.o utp_com.c -O2 -I/home/peko/autobuild/instance-0/output/host/include /usr/bin/gcc -o utp_com utp_com.o -L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib make[1]: Leaving directory '/home/peko/autobuild/instance-0/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Installing to host directory /usr/bin/install -D -m 755 /home/peko/autobuild/instance-0/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6/utp_com /home/peko/autobuild/instance-0/output/host/bin/utp_com wipe-2.3.1.tar.bz2: OK (sha256: 463916370f9b35bb34419c2c0ae3dc4c0a471db32e8595afa1d14c0337b61aa0) >>> wipe 2.3.1 Extracting bzcat /home/peko/autobuild/instance-0/dl/wipe/wipe-2.3.1.tar.bz2 | tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/wipe-2.3.1 -xf - >>> wipe 2.3.1 Patching Applying 0001-musl.patch using patch: patching file rand.h >>> wipe 2.3.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-0/output/build/wipe-2.3.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> wipe 2.3.1 Patching libtool >>> wipe 2.3.1 Configuring (cd /home/peko/autobuild/instance-0/output/build/wipe-2.3.1/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/home/peko/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-ar" AS="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-as" LD="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-ld" NM="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-nm" CC="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc" GCC="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc" CPP="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-cpp" CXX="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-g++" FC="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-gfortran" F77="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-gfortran" RANLIB="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-ranlib" READELF="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-readelf" STRIP="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-strip" OBJCOPY="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-objcopy" OBJDUMP="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-0/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-as" DEFAULT_LINKER="/home/peko/autobuild/instance-0/output/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-0/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-uclibcgnueabi --host=arm-buildroot-linux-uclibcgnueabi --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) loading site script /dev/null creating cache ./config.cache checking host system type... arm-buildroot-linux-uclibcgnueabi checking target system type... arm-buildroot-linux-uclibcgnueabi checking build system type... x86_64-pc-linux-gnu checking for gcc... /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc checking whether the C compiler (/home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os ) works... yes checking whether the C compiler (/home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os ) is a cross-compiler... yes checking whether we are using GNU C... yes checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc accepts -g... yes checking for POSIXized ISC... no checking how to run the C preprocessor... /home/peko/autobuild/instance-0/output/host/bin/arm-linux-cpp checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc needs -traditional... no checking for a BSD compatible install... /usr/bin/install -c checking whether the C compiler accepts -pipe... yes checking whether the C compiler accepts -g... yes checking whether the C compiler accepts -O0... yes checking whether the C compiler accepts -O2... yes checking whether the C compiler accepts -ansi... yes checking whether the C compiler accepts -pedantic... yes checking whether the C compiler accepts -Wall... yes checking whether the C compiler accepts -Werror... yes checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking for ANSI C header files... yes checking for unistd.h... yes checking for stdint.h... yes checking for fcntl.h... yes checking for memory.h... yes checking for linux/fs.h... yes checking for sys/mount.h... yes checking for sys/disklabel.h... no checking for sys/ioctl.h... yes checking for sys/file.h... yes checking for sys/stat.h... yes checking for sys/time.h... yes checking for sys/types.h... yes checking for getopt.h... yes checking for errno.h... yes checking for termio.h... yes checking for termios.h... yes checking for linux/mtio.h... yes checking for working const... yes checking for inline... __inline__ checking for off_t... yes checking for size_t... yes checking whether stat file-mode macros are broken... no checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... (cached) yes checking for getopt... yes checking for strnlen... yes checking for bzero... yes checking for memset... yes checking for memcpy... yes checking for realloc... yes checking for fchmod... yes checking for ioctl... yes checking for fcntl... yes checking for lockf... yes checking for flock... yes checking for fsync... yes checking for fdatasync... yes checking for unlink... yes checking for rmdir... yes checking for remove... yes checking for rename... yes checking for dirfd... yes updating cache ./config.cache creating ./config.status creating Makefile creating config.h >>> wipe 2.3.1 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/home/peko/bin:/home/peko/bin" /usr/bin/make -j6 -C /home/peko/autobuild/instance-0/output/build/wipe-2.3.1/ make[1]: Entering directory '/home/peko/autobuild/instance-0/output/build/wipe-2.3.1' /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o main.o main.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o wipe.o wipe.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o rand.o rand.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o dir.o dir.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o file.o file.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o blkdev.o blkdev.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o lock.o lock.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o text.o text.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o str.o str.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o percent.o percent.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o prompt.o prompt.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o io.o io.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o mt.o mt.c /home/peko/autobuild/instance-0/output/host/bin/arm-linux-gcc *.o -o wipe make[1]: Leaving directory '/home/peko/autobuild/instance-0/output/build/wipe-2.3.1' >>> wipe 2.3.1 Installing to target /usr/bin/install -D -m 0755 /home/peko/autobuild/instance-0/output/build/wipe-2.3.1/wipe /home/peko/autobuild/instance-0/output/target/usr/bin/wipe >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/peko/autobuild/instance-0/output/build/packages-file-list.txt ./support/scripts/check-uniq-files -t staging /home/peko/autobuild/instance-0/output/build/packages-file-list-staging.txt Warning: staging file "./usr/lib32" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/resolv.conf" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/group" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/passwd" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/mtab" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] ./support/scripts/check-uniq-files -t host /home/peko/autobuild/instance-0/output/build/packages-file-list-host.txt /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/peko/autobuild/instance-0/output/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/peko/autobuild/instance-0/output/target/etc/inittab if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/peko/autobuild/instance-0/output/target/etc/shells || echo "/bin/ash" >> /home/peko/autobuild/instance-0/output/target/etc/shells; fi if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/peko/autobuild/instance-0/output/target/etc/shells || echo "/bin/hush" >> /home/peko/autobuild/instance-0/output/target/etc/shells; fi mkdir -p /home/peko/autobuild/instance-0/output/host/etc/meson sed -e "s%@TARGET_CROSS@%/home/peko/autobuild/instance-0/output/host/bin/arm-linux-%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%arm926ej-s%g" -e "s%@TARGET_ENDIAN@%"little"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os `%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os `%g" -e "s%@HOST_DIR@%/home/peko/autobuild/instance-0/output/host%g" package/meson//cross-compilation.conf.in > /home/peko/autobuild/instance-0/output/host/etc/meson/cross-compilation.conf mkdir -p /home/peko/autobuild/instance-0/output/target/etc echo "buildroot" > /home/peko/autobuild/instance-0/output/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/peko/autobuild/instance-0/output/target/etc/hosts mkdir -p /home/peko/autobuild/instance-0/output/target/etc echo "Welcome to Buildroot" > /home/peko/autobuild/instance-0/output/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/peko/autobuild/instance-0/output/target/etc/shadow rm -f /home/peko/autobuild/instance-0/output/target/bin/sh rm -f /home/peko/autobuild/instance-0/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/peko/autobuild/instance-0/output/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/peko/autobuild/instance-0/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/peko/autobuild/instance-0/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/peko/autobuild/instance-0/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/peko/autobuild/instance-0/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/peko/autobuild/instance-0/output/target/usr/include /home/peko/autobuild/instance-0/output/target/usr/share/aclocal \ /home/peko/autobuild/instance-0/output/target/usr/lib/pkgconfig /home/peko/autobuild/instance-0/output/target/usr/share/pkgconfig \ /home/peko/autobuild/instance-0/output/target/usr/lib/cmake /home/peko/autobuild/instance-0/output/target/usr/share/cmake find /home/peko/autobuild/instance-0/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/peko/autobuild/instance-0/output/target/lib/ /home/peko/autobuild/instance-0/output/target/usr/lib/ /home/peko/autobuild/instance-0/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f rm -rf /home/peko/autobuild/instance-0/output/target/usr/share/gdb rm -rf /home/peko/autobuild/instance-0/output/target/usr/share/bash-completion rm -rf /home/peko/autobuild/instance-0/output/target/usr/share/zsh rm -rf /home/peko/autobuild/instance-0/output/target/usr/man /home/peko/autobuild/instance-0/output/target/usr/share/man rm -rf /home/peko/autobuild/instance-0/output/target/usr/info /home/peko/autobuild/instance-0/output/target/usr/share/info rm -rf /home/peko/autobuild/instance-0/output/target/usr/doc /home/peko/autobuild/instance-0/output/target/usr/share/doc rm -rf /home/peko/autobuild/instance-0/output/target/usr/share/gtk-doc rmdir /home/peko/autobuild/instance-0/output/target/usr/share 2>/dev/null || true find /home/peko/autobuild/instance-0/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/peko/autobuild/instance-0/output/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/peko/autobuild/instance-0/output/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/peko/autobuild/instance-0/output/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/peko/autobuild/instance-0/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/peko/autobuild/instance-0/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/peko/autobuild/instance-0/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.05-git-00641-g7d17ae2acf"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2019.05-git"; \ echo "PRETTY_NAME=\"Buildroot 2019.05-git\"" \ ) > /home/peko/autobuild/instance-0/output/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/peko/autobuild/instance-0/output/target/etc >>> Sanitizing RPATH in target tree /home/peko/autobuild/instance-0/buildroot/support/scripts/fix-rpath target touch /home/peko/autobuild/instance-0/output/target/usr make: Leaving directory '/home/peko/autobuild/instance-0/buildroot' make: Entering directory '/home/peko/autobuild/instance-0/buildroot' >>> Buildroot 2019.05-git-00641-g7d17ae2acf Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> aer-inject 9bd5e2c7886fca72f139cd8402488a2235957d41 Collecting legal info ERROR: No hash found for README >>> host-bison 3.0.4 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) ERROR: No hash found for libltdl/COPYING.LIB >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gettext Collecting legal info >>> host-gettext-tiny c6dcdcdef801127549d3906d153c061880d25a73 Collecting legal info LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34) extra/COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> arp-scan 1.9.5 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> libpcap 1.9.0 Collecting legal info LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> aumix 2.9.1 Collecting legal info ERROR: No hash found for COPYING >>> ncurses 6.1 Collecting legal info ERROR: No hash found for README >>> host-ncurses 6.1 Collecting legal info ERROR: No hash found for README >>> bitstream 1.4 Collecting legal info COPYING: OK (sha256: 9644a812f9a8377a59acb7092a36ce8882a39743425d9171a8fb84637e2f6e04) >>> busybox 1.30.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> kmod 25 Collecting legal info ERROR: No hash found for libkmod/COPYING >>> host-pkgconf 1.5.3 Collecting legal info ERROR: No hash found for COPYING >>> dmraid 1.0.0.rc16-3 Collecting legal info ERROR: No hash found for 1.0.0.rc16-3/dmraid/LICENSE_GPL ERROR: No hash found for 1.0.0.rc16-3/dmraid/LICENSE >>> lvm2 2.02.183 Collecting legal info COPYING: OK (sha256: e76fbcd2fb97cf202da330301327754d2db5c58b5b4bebd3a8a749393e7603d1) COPYING.LIB: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> libaio 0.3.111 Collecting legal info COPYING: OK (sha256: 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509) >>> docker-cli v18.09.4 Collecting legal info LICENSE: OK (sha256: 2d81ea060825006fc8f3fe28aa5dc0ffeb80faf325b612c955229157b8c10dc0) >>> host-go 1.12.1 Collecting legal info LICENSE: OK (sha256: 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067) >>> host-go-bootstrap 1.4.3 Collecting legal info ERROR: No hash found for LICENSE >>> host-dtc 1.4.7 Collecting legal info ERROR: No hash found for README.license ERROR: No hash found for GPL >>> ezxml 0.8.6 Collecting legal info ERROR: No hash found for license.txt >>> fftw-double 3.3.8 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) >>> ficl 4.1.0 Collecting legal info ERROR: No hash found for ReadMe.txt >>> genromfs 0.5.2 Collecting legal info ERROR: No hash found for COPYING >>> gmp 6.1.2 Collecting legal info ERROR: No hash found for COPYING.LESSERv3 ERROR: No hash found for COPYINGv2 >>> gnu-efi 3.0.9 Collecting legal info README.efilib: OK (sha256: 42d352e9c28dd446fd0209cd6f75588c8e41f0934540bb382bbd61c752360265) >>> hicolor-icon-theme 0.15 Collecting legal info ERROR: No hash found for COPYING >>> initscripts Collecting legal info >>> iptables 1.8.2 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> jpeg Collecting legal info >>> libjpeg 9c Collecting legal info README: OK (sha256: 31f366acfb6259456d9046eb7f16875e387f8bf029d37ac4c4397bf63f22fd6b) >>> jsmin 1bf6ce5f74a9f8752ac7f5d115b8d7ccb31cfe1b Collecting legal info ERROR: No hash found for jsmin.c >>> host-jsmin 1bf6ce5f74a9f8752ac7f5d115b8d7ccb31cfe1b Collecting legal info ERROR: No hash found for jsmin.c >>> json-c 0.13.1 Collecting legal info COPYING: OK (sha256: 74c1e6ca5eba76b54d0ad00d4815c8315c1b3bc45ff99de61d103dc92486284c) >>> libcuefile r475 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> host-cmake 3.8.2 Collecting legal info ERROR: No hash found for Copyright.txt >>> libdvbcsa 1.1.0 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libebur128 v1.2.2 Collecting legal info COPYING: OK (sha256: d6b4754bb67bdd08b97d5d11b2d7434997a371585a78fe77007149df3af8d09c) >>> libfreefare 0.4.0 Collecting legal info COPYING: OK (sha256: be6209dfd763a0ba77fbe990cfd2512804441d8b5f0cad927baa3341b50fcade) >>> libnfc 1.7.1 Collecting legal info COPYING: OK (sha256: 9ccf26cfe845e0eb8bb58053e47366e7ab6b697ae010f7650978d4b71b7d1fc1) >>> libusb 1.0.22 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> libusb-compat 0.1.5 Collecting legal info ERROR: No hash found for COPYING >>> openssl Collecting legal info >>> libopenssl 1.1.1b Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> libiconv 1.15 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> libilbc 829b08c7902ceb87a261279fabb36b6d523c6e07 Collecting legal info gips_iLBClicense.pdf: OK (sha256: b7f4cbb4a12cd11a3d1aeda9bd17c99f59b054de4b3ee53045531cd2fa74dd2a) >>> libmad 0.15.1b Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libmng 2.0.3 Collecting legal info LICENSE: OK (sha256: ba280734838eb3f22a85b92a7e62de357d4d4c325029dce723b0cb125c417c35) >>> libogg 1.3.3 Collecting legal info COPYING: OK (sha256: d2ab5758336489da61c12cc5bb757da5339c4ae9001f9bb0562b4370249af814) >>> libreplaygain r475 Collecting legal info ERROR: No hash found for src/gain_analysis.c >>> libsndfile 1.0.28 Collecting legal info ERROR: No hash found for COPYING >>> libsocketcan 0.0.10 Collecting legal info >>> libtheora 1.1.1 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for LICENSE >>> libvorbis 1.3.6 Collecting legal info COPYING: OK (sha256: 29e9914e6173b7061b7d48c25e6159fc1438326738bc047cc7248abc01b271f6) >>> libubox 723730214732862de7e892bae2f7a7889e66bf1b Collecting legal info >>> libvpx v1.7.0 Collecting legal info LICENSE: OK (sha256: 8267348d5af1262c11d1a08de2f5afc77457755f1ac658627dd9acf71011d615) PATENTS: OK (sha256: cc3273e0694ea5896145e0677699b53471b03ea43021ddc50e7923fbb9f5023c) >>> ltris 1.0.19 Collecting legal info ERROR: No hash found for COPYING >>> sdl 1.2.15 Collecting legal info ERROR: No hash found for COPYING >>> memtester 4.3.0 Collecting legal info ERROR: No hash found for COPYING >>> mpir 3.0.0 Collecting legal info ERROR: No hash found for COPYING.LIB >>> host-yasm 1.3.0 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for BSD.txt ERROR: No hash found for Artistic.txt ERROR: No hash found for GNU_GPL-2.0 ERROR: No hash found for GNU_LGPL-2.0 >>> host-mtd 2.1.0 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) >>> host-lzo 2.10 Collecting legal info ERROR: No hash found for COPYING >>> host-util-linux 2.33 Collecting legal info README.licensing: OK (sha256: 4335620e8f478ee4dc4d26540448d39469091ef1d8e3fbbbb8bf753206ceac74) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> multicat 2.3 Collecting legal info COPYING: OK (sha256: 94f68aec169fb6c9937eade757251714d38a56812be5dbfc3973914a71ad8d2d) >>> musepack r475 Collecting legal info ERROR: No hash found for libmpcdec/COPYING ERROR: No hash found for libmpcenc/quant.c >>> netstat-nat 1.4.10 Collecting legal info ERROR: No hash found for COPYING >>> openresolv fe4e1ec4e2be2adfc1530ade94ebb30aa6f51540 Collecting legal info LICENSE: OK (sha256: d1f9dcd2dac4e095b14caab517cfe791a6e0785346164b7d0cafc13c714f8aa5) >>> host-opkg-utils 0.3.4 Collecting legal info ERROR: No hash found for COPYING >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pimd 2.3.2 Collecting legal info LICENSE: OK (sha256: 3379436c16caccdef9b40a49fbdfdbb45aad8ecb05870834490b8fb080126009) LICENSE.mrouted: OK (sha256: 4328a21f0822caa9976356623118bcdcc9970c7a0f9a3deeba23c779b7cfb5d1) >>> pixman 0.34.0 Collecting legal info ERROR: No hash found for COPYING >>> prboom 2.5.0 Collecting legal info ERROR: No hash found for COPYING >>> sdl_mixer 1.2.12 Collecting legal info ERROR: No hash found for COPYING >>> sdl_net 1.2.8 Collecting legal info ERROR: No hash found for COPYING >>> pure-ftpd 1.0.47 Collecting legal info COPYING: OK (sha256: e724ba991d8efa4c963e84ec31314c532dab00ac455ef77020fe60e78177bf23) >>> rpi-bt-firmware 8c1e2bff1da9850f68efcfff3da5d939ec27a2ee Collecting legal info LICENCE.broadcom_bcm43xx: OK (sha256: b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d) >>> rtc-tools 33ef4aa1c92b0c92a351284d93d1ac5570de9cc7 Collecting legal info COPYING: OK (sha256: 7ae50a5344af14d6231aff6814632a220b3127da4099aea2c6070fd79c407c1a) >>> sbc 1.3 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING.LIB >>> sdl2 2.0.9 Collecting legal info COPYING.txt: OK (sha256: 61e627031e1160bf8b9bdbc9cda27656d422ea8eaab199b64b4a4a4168437154) >>> ser2net 3.5 Collecting legal info COPYING: OK (sha256: 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1) >>> speex 1.2.0 Collecting legal info COPYING: OK (sha256: 671bb5d8fd3c6b05a2e831d90f978ac27965c92bd8ea6d16b3df76e3440c0e9f) >>> sshpass 1.06 Collecting legal info ERROR: No hash found for COPYING >>> sudo 1.8.23 Collecting legal info doc/LICENSE: OK (sha256: b6625a7b58e9469a7adfd1732960579a19fe84b3508030f9a31641283e2250b8) >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Collecting legal info ERROR: No hash found for ubusd_acl.h >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Collecting legal info LICENSE: OK (sha256: a45d0bb572ed792ed34627a72621834b3ba92aab6e2cc4e04301dee7a728d753) >>> host-sg3_utils 1.44 Collecting legal info COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc) BSD_LICENSE: OK (sha256: 31f6d59679e0fb21c9358f22484e6e3c53e20ef08c0950fd38a4a867cb55edc9) >>> wipe 2.3.1 Collecting legal info ERROR: No hash found for LICENSE WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) WARNING: libsocketcan-0.0.10: cannot save license (LIBSOCKETCAN_LICENSE_FILES not defined) WARNING: libubox-723730214732862de7e892bae2f7a7889e66bf1b: cannot save license (LIBUBOX_LICENSE_FILES not defined) Legal info produced in /home/peko/autobuild/instance-0/output/legal-info make: Leaving directory '/home/peko/autobuild/instance-0/buildroot'