checking for unistd.h... (cached) yes checking for sys/param.h... yes checking for getpagesize... yes checking for working mmap... (cached) yes checking for alarm... yes checking for clock_gettime... yes checking for floor... yes checking for getcwd... yes checking for gettimeofday... yes checking for localeconv... yes checking for memchr... yes checking for memmove... yes checking for memset... yes checking for modf... yes checking for munmap... yes checking for pow... yes checking for select... yes checking for setenv... yes checking for sqrt... yes checking for strcasecmp... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strrchr... yes checking for strstr... yes checking for strtol... yes checking for strtoul... yes checking for malloc... yes checking for realloc... yes Generating config files checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating gtk/Makefile config.status: creating java/Makefile config.status: creating po/Makefile.in config.status: creating zbar/Makefile config.status: creating zbar.pc config.status: creating zbar-gtk.pc config.status: creating doc/doxygen.conf config.status: creating test/test_examples.sh config.status: creating test/check_dbus.sh config.status: creating include/config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing doc/version.xml commands config.status: executing doc/reldate.xml commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6 please verify that the detected configuration matches your expectations: ------------------------------------------------------------------------ gettext yes X --with-x=disabled pthreads --enable-pthread=yes doc --enable-doc=no v4l --enable-video=yes jpeg --with-jpeg=yes Python --with-python=no GTK --with-gtk=no GObject introspection --with-gir=no Qt --with-qt=no Java --with-java=no Dbus --with-dbus=no ImageMagick --with-imagemagick=no Enabled codes: ean databar code128 code93 code39 codabar i25 qrcode sqcode Disabled codes: pdf417 => the zbarimg file scanner will *NOT* be built => GTK support will *NOT* be built => the Qt widget will *NOT* be built => the Java interface will *NOT* be built => the Java unit test will *NOT* be enabled >>> zbar 0.23.1 Building PATH="/home/buildroot/autobuild/run/instance-0/output-1/host/bin:/home/buildroot/autobuild/run/instance-0/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/ make[1]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' /usr/bin/make all-recursive make[2]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' Making all in zbar make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' CC libzbar_la-config.lo CC libzbar_la-error.lo CC libzbar_la-symbol.lo CC libzbar_la-image.lo CC libzbar_la-convert.lo CC libzbar_la-processor.lo CC libzbar_la-refcnt.lo CC libzbar_la-window.lo CC libzbar_la-video.lo CC libzbar_la-img_scanner.lo CC libzbar_la-scanner.lo CC libzbar_la-decoder.lo CC libzbar_la-misc.lo CC libzbar_la-sqcode.lo CC decoder/libzbar_la-sq_finder.lo CC processor/libzbar_la-posix.lo CC libzbar_la-jpeg.lo CC processor/libzbar_la-null.lo CC processor/libzbar_la-lock.lo CC decoder/libzbar_la-ean.lo CC decoder/libzbar_la-databar.lo CC decoder/libzbar_la-code128.lo CC decoder/libzbar_la-code93.lo CC decoder/libzbar_la-code39.lo CC decoder/libzbar_la-codabar.lo CC decoder/libzbar_la-i25.lo CC decoder/libzbar_la-qr_finder.lo CC qrcode/libzbar_la-qrdec.lo CC qrcode/libzbar_la-qrdectxt.lo CC qrcode/libzbar_la-rs.lo CC qrcode/libzbar_la-isaac.lo CC qrcode/libzbar_la-bch15_5.lo CC qrcode/libzbar_la-binarize.lo CC qrcode/libzbar_la-util.lo CC video/libzbar_la-v4l.lo CC video/libzbar_la-v4l2.lo CC window/libzbar_la-null.lo In file included from ./image.h:34, from ./video.h:37, from video/v4l2.c:52: video/v4l2.c: In function 'v4l2_dq': ./error.h:109:29: warning: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'ssize_t' {aka 'int'} [-Wformat=] 109 | fprintf(stderr, "%s: " format, __func__ , ##args); \ | ^~~~~~ video/v4l2.c:142:13: note: in expansion of macro 'zprintf' 142 | zprintf(0, "WARNING: read() size mismatch: 0x%lx != 0x%lx\n", | ^~~~~~~ video/v4l2.c:142:60: note: format string is defined here 142 | zprintf(0, "WARNING: read() size mismatch: 0x%lx != 0x%lx\n", | ~~^ | | | long unsigned int | %x CCLD libzbar.la make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' Making all in po make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/po' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/po' Making all in . make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' CC zbarcam/zbarcam-zbarcam.o CCLD zbarcam/zbarcam make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' >>> zbar 0.23.1 Installing to staging directory PATH="/home/buildroot/autobuild/run/instance-0/output-1/host/bin:/home/buildroot/autobuild/run/instance-0/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot install -C /home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/ make[1]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' /usr/bin/make install-recursive make[2]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' Making install in zbar make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib' make[4]: Nothing to be done for `install-data-am'. /bin/sh ../libtool --mode=install /usr/bin/install -c libzbar.la '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib' libtool: install: /usr/bin/install -c .libs/libzbar.so.0.3.0 /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libzbar.so.0.3.0 libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libzbar.so.0.3.0 libzbar.so.0 || { rm -f libzbar.so.0 && ln -s libzbar.so.0.3.0 libzbar.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libzbar.so.0.3.0 libzbar.so || { rm -f libzbar.so && ln -s libzbar.so.0.3.0 libzbar.so; }; }) libtool: install: /usr/bin/install -c .libs/libzbar.lai /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libzbar.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' Making install in po make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/po' installing pt_BR.gmo as /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/share/locale/pt_BR/LC_MESSAGES/zbar.mo if test "zbar" = "gettext-tools"; then \ /bin/mkdir -p /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/po' Making install in . make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/bin' /bin/sh ./libtool --mode=install /usr/bin/install -c zbarcam/zbarcam '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/bin' libtool: install: /usr/bin/install -c zbarcam/zbarcam /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/bin/zbarcam /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/share/doc/zbar' /usr/bin/install -c -m 644 COPYING HACKING.md INSTALL.md LICENSE.md NEWS.md README.md TODO.md ABOUT-NLS '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/share/doc/zbar' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include' /usr/bin/install -c -m 644 include/zbar.h '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 zbar.pc '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include/zbar' /usr/bin/install -c -m 644 include/zbar/Scanner.h include/zbar/Decoder.h include/zbar/Exception.h include/zbar/Symbol.h include/zbar/Image.h include/zbar/ImageScanner.h include/zbar/Video.h include/zbar/Window.h include/zbar/Processor.h '/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include/zbar' make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' >>> zbar 0.23.1 Fixing libtool files for la in $(find /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/run/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/run/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> zbar 0.23.1 Installing to target PATH="/home/buildroot/autobuild/run/instance-0/output-1/host/bin:/home/buildroot/autobuild/run/instance-0/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-0/output-1/target install -C /home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/ make[1]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' /usr/bin/make install-recursive make[2]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' Making install in zbar make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib' make[4]: Nothing to be done for `install-data-am'. /bin/sh ../libtool --mode=install /usr/bin/install -c libzbar.la '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libzbar.so.0.3.0 /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/libzbar.so.0.3.0 libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib && { ln -s -f libzbar.so.0.3.0 libzbar.so.0 || { rm -f libzbar.so.0 && ln -s libzbar.so.0.3.0 libzbar.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib && { ln -s -f libzbar.so.0.3.0 libzbar.so || { rm -f libzbar.so && ln -s libzbar.so.0.3.0 libzbar.so; }; }) libtool: install: /usr/bin/install -c .libs/libzbar.lai /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/libzbar.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/zbar' Making install in po make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/po' installing pt_BR.gmo as /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/locale/pt_BR/LC_MESSAGES/zbar.mo if test "zbar" = "gettext-tools"; then \ /bin/mkdir -p /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1/po' Making install in . make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/bin' /bin/sh ./libtool --mode=install /usr/bin/install -c zbarcam/zbarcam '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/bin' libtool: install: /usr/bin/install -c zbarcam/zbarcam /home/buildroot/autobuild/run/instance-0/output-1/target/usr/bin/zbarcam /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/doc/zbar' /usr/bin/install -c -m 644 COPYING HACKING.md INSTALL.md LICENSE.md NEWS.md README.md TODO.md ABOUT-NLS '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/doc/zbar' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/include' /usr/bin/install -c -m 644 include/zbar.h '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 zbar.pc '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/pkgconfig' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/include/zbar' /usr/bin/install -c -m 644 include/zbar/Scanner.h include/zbar/Decoder.h include/zbar/Exception.h include/zbar/Symbol.h include/zbar/Image.h include/zbar/ImageScanner.h include/zbar/Video.h include/zbar/Window.h include/zbar/Processor.h '/home/buildroot/autobuild/run/instance-0/output-1/target/usr/include/zbar' make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/zbar-0.23.1' >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/run/instance-0/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/buildroot/autobuild/run/instance-0/output-1/host/bin/m68k-linux-%g' -e 's%@TARGET_ARCH@%m68k%g' -e 's%@TARGET_CPU@%68040%g' -e 's%@TARGET_ENDIAN@%big%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/home/buildroot/autobuild/run/instance-0/output-1/host%g' -e 's%@STAGING_DIR@%/home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-0/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/buildroot/autobuild/run/instance-0/output-1/host/etc/meson/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-0/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/run/instance-0/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-0/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/run/instance-0/output-1/build/busybox-1.33.0/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-0/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-0/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/run/instance-0/output-1/build/busybox-1.33.0/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-0/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-0/output-1/target/etc/shells; fi rm -f /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/glib-2.0/schemas/*.xml /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/glib-2.0/schemas/*.dtd /home/buildroot/autobuild/run/instance-0/output-1/host/bin/glib-compile-schemas /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/glib-2.0/schemas No schema files found: doing nothing. mkdir -p /home/buildroot/autobuild/run/instance-0/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/run/instance-0/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-0/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/run/instance-0/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-0/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-0/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/run/instance-0/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/run/instance-0/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/run/instance-0/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/run/instance-0/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/run/instance-0/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/run/instance-0/output-1/build/locales.nopurge for dir in /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/locale /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-0/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/usr/include /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/run/instance-0/output-1/target/usr/doc find /home/buildroot/autobuild/run/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/run/instance-0/output-1/target/lib/ /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/ /home/buildroot/autobuild/run/instance-0/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/usr/man /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/usr/info /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/usr/doc /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/run/instance-0/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/run/instance-0/output-1/target/lib/debug /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/debug find /home/buildroot/autobuild/run/instance-0/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-0/output-1/host/bin/m68k-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/run/instance-0/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-0/output-1/host/bin/m68k-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/run/instance-0/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/run/instance-0/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/run/instance-0/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2020.05-4682-g7b56384"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2021.05-git"; \ echo "PRETTY_NAME=\"Buildroot 2021.05-git\"" \ ) > /home/buildroot/autobuild/run/instance-0/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-0/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/run/instance-0/output-1/per-package /home/buildroot/autobuild/run/instance-0/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/run/instance-0/output-1/target/usr ln -snf /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot /home/buildroot/autobuild/run/instance-0/output-1/staging make: Leaving directory `/home/buildroot/autobuild/run/instance-0/buildroot' make: Entering directory `/home/buildroot/autobuild/run/instance-0/buildroot' >>> Buildroot 2020.05-4682-g7b56384 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-bootlin 2020.08-1 Collecting legal info >>> toolchain Collecting legal info >>> argp-standalone 1.3 Collecting legal info argp.h: OK (sha256: bbb8919aa520069b0234faf5e83a94052d278419ffe97ca8e843ecc9b212d1ab) >>> aumix 2.9.1 Collecting legal info COPYING: OK (sha256: 1ca3e8f71b7de618968e7ea9fe47822d9e704dc476aef8544033abedec355225) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gettext Collecting legal info >>> host-gettext-gnu 0.20.1 Collecting legal info COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) gettext-runtime/intl/COPYING.LIB: OK (sha256: 3fe5361f24b7c49ba12911c08f5a33f9cb18871d95d9fb881f5b8a4793e04288) >>> host-libtextstyle 0.20.1 Collecting legal info COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-libxml2 2.9.10 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> gpm 1.20.7 Collecting legal info COPYING: OK (sha256: 1b2a567f289f66a143c56353e7b3d4fa5862514a5e3c5cfdf8b02ee5e5aaa953) >>> host-bison 3.7.6 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> busybox 1.33.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> util-linux 2.36.2 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> file 5.38 Collecting legal info COPYING: OK (sha256: 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274) src/mygetopt.h: OK (sha256: 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462) src/vasprintf.c: OK (sha256: 58b5932aca6c10f2194290a3b26088ec9ba07ef6b52cc9bb2dd638cc634db6f1) >>> host-file 5.38 Collecting legal info COPYING: OK (sha256: 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274) src/mygetopt.h: OK (sha256: 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462) src/vasprintf.c: OK (sha256: 58b5932aca6c10f2194290a3b26088ec9ba07ef6b52cc9bb2dd638cc634db6f1) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> gettext Collecting legal info >>> gettext-gnu 0.20.1 Collecting legal info COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) gettext-runtime/intl/COPYING.LIB: OK (sha256: 3fe5361f24b7c49ba12911c08f5a33f9cb18871d95d9fb881f5b8a4793e04288) >>> initscripts Collecting legal info >>> input-event-daemon 0.1.3 Collecting legal info README: OK (sha256: 56f6614c63a023e4d486332968bfa7933f06ea7c785ef85f403448022ae7f912) >>> jpeg Collecting legal info >>> libjpeg 9d Collecting legal info README: OK (sha256: 3dc4e4a145c907a96bd6a0e40be3f722fecf061951909143cdff5365cba9c78c) >>> libffi 3.3 Collecting legal info LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0) >>> libfreeimage 3.18.0 Collecting legal info license-gplv2.txt: OK (sha256: d51615a1a47f1ddbb027920d60d3fc30a00e1284c795a47857883e641349fadf) license-gplv3.txt: OK (sha256: 084be110e3e8757d8e6945cda1fbc7e5073bbe688dc19b92c0d8440155d8e282) license-fi.txt: OK (sha256: 0bb9a3123297c73ae6e19c70459fb0e58f313f67ca63176fd43f8e77668b8243) >>> libgcrypt 1.9.2 Collecting legal info COPYING.LIB: OK (sha256: ca0061fc1381a3ab242310e4b3f56389f28e3d460eb2fd822ed7a21c6f030532) >>> libgpg-error 1.41 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> libglib2 2.66.8 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.66.8 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libffi 3.3 Collecting legal info LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0) >>> host-meson 0.57.1 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.10.2 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-cmake 3.15.5 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> host-python3 3.9.2 Collecting legal info LICENSE: OK (sha256: 599826df92bfdcd2702eac691072498bb096c55af04ee984cf90f70ed77b5a70) >>> host-expat 2.2.10 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> host-python3-setuptools 44.0.0 Collecting legal info LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a) >>> host-pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> host-util-linux 2.36.2 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> libopenssl 1.1.1k Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> libpcap 1.10.0 Collecting legal info LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> libpfm4 4.11.0 Collecting legal info COPYING: OK (sha256: beef323d68fc5db9c67b20e8e9de7ccde371d20cdbcdd686804055b18b926d90) >>> libqmi 1.28.2 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libv4l 1.20.0 Collecting legal info COPYING: OK (sha256: 391e4da1c54a422a78d83be7bf84b2dfb8bacdd8ad256fa4374e128655584a8a) COPYING.libv4l: OK (sha256: 5a7f623a50e384aaf6d2ced068339ddf93d0a50d3a0ecbe86f125b07804ecc78) lib/libv4l1/libv4l1-kernelcode-license.txt: OK (sha256: 34229b5aadfb768d0d083987cba54203a920904a3ec8320823c6125b9831acd1) >>> lttng-babeltrace 1.5.7 Collecting legal info mit-license.txt: OK (sha256: 2f801b7c2494850c3d91da820eb230502dc0192c9d0db024db37ec08d0be1434) gpl-2.0.txt: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) LICENSE: OK (sha256: 12d4222ac628fe4092cba8ed90bc5227a4dedd0b94973273cecbc393325bf1c2) >>> popt 1.18 Collecting legal info COPYING: OK (sha256: 518d4f2a05064cb9a8ec0ea02e86408af4feed6916f78ef42171465db8b383c5) >>> mobile-broadband-provider-info 20190618 Collecting legal info COPYING: OK (sha256: 3d510b215a33087b9ceb9592da21575ea1f9f98bd4d983a38e65fe851a552174) >>> host-libxslt 1.1.34 Collecting legal info COPYING: OK (sha256: 7e48e290b6bfccc2ec1b297023a1d77f2fd87417f71fbb9f50aabef40a851819) >>> nbd 3.20 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> openssl Collecting legal info >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pppd 2.4.8 Collecting legal info pppd/tdb.c: OK (sha256: 3990c65c506885f7bb75455d1d6188743a14ad46f5b62e136ef3739aed52c532) pppd/plugins/pppoatm/COPYING: OK (sha256: 1822ead9d2854adfbd282322b29730a3fec4cc67f6f6a2e487aad3476e3afd59) pppdump/bsd-comp.c: OK (sha256: 91a5e9c173e0e001e081e15bf7850cfd782a0baa02f5921e327ae3b449beff3f) pppd/ccp.c: OK (sha256: ee1c28551c87cdcdaf80eb3922726f015201614cb560a5ed18a7a0c15f2b4aa4) pppd/plugins/passprompt.c: OK (sha256: 6fa4c3dad059f6ef15c1c5e5219d9d0d40991dd3a162098a89967a1720de059e) >>> ptpd2 2.3.1 Collecting legal info COPYRIGHT: OK (sha256: 5e101ac565a8e74ef4efbf7e0c95ef9333e00618c05dbf5fb4ed50a5bab1ff09) >>> rp-pppoe 3.14 Collecting legal info doc/LICENSE: OK (sha256: 464006ba771074f4022db14f58a29a0b447b6fdde9529cf0331be396b6279162) >>> sqlite 3340100 Collecting legal info tea/license.terms: OK (sha256: 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9) >>> sudo 1.9.5p2 Collecting legal info doc/LICENSE: OK (sha256: 505c5955c373514e2533a24a8346f44038e29cba874f5ca83beb171a7409089f) >>> vde2 2.3.2 Collecting legal info COPYING: OK (sha256: fb295d0c24b8ef4b39017ac68e772e8e6e839612ce10da12b9f48d1e8e512e2e) COPYING.libvdeplug: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) COPYING.slirpvde: OK (sha256: d5ac74315b2d2f9c53f5839e311484f4646a9401b68d02d36f3dab386352e74d) >>> zbar 0.23.1 Collecting legal info LICENSE.md: OK (sha256: 44260f9252c7fe38ba8dfb645330504f4a375e3a5e9dd7d5d6b9f04adb4952f1) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-bootlin-2020.08-1: cannot save license (TOOLCHAIN_EXTERNAL_BOOTLIN_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/run/instance-0/output-1/legal-info make: Leaving directory `/home/buildroot/autobuild/run/instance-0/buildroot'