>>> gnuplot 6.0.0 Downloading wget -nd -t 3 -O '/home/autobuild/autobuild/instance-9/output-1/build/.gnuplot-6.0.0.tar.gz.W0JyIx/output' 'http://downloads.sourceforge.net/project/gnuplot/gnuplot/6.0.0/gnuplot-6.0.0.tar.gz' URL transformed to HTTPS due to an HSTS policy --2024-06-18 16:25:36-- https://downloads.sourceforge.net/project/gnuplot/gnuplot/6.0.0/gnuplot-6.0.0.tar.gz Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt' Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 204.68.111.105 Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|204.68.111.105|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://versaweb.dl.sourceforge.net/project/gnuplot/gnuplot/6.0.0/gnuplot-6.0.0.tar.gz?viasf=1 [following] --2024-06-18 16:25:36-- https://versaweb.dl.sourceforge.net/project/gnuplot/gnuplot/6.0.0/gnuplot-6.0.0.tar.gz?viasf=1 Resolving versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)... 162.251.232.173 Connecting to versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)|162.251.232.173|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 7522870 (7.2M) [application/x-gzip] Saving to: '/home/autobuild/autobuild/instance-9/output-1/build/.gnuplot-6.0.0.tar.gz.W0JyIx/output' 0K .......... .......... .......... .......... .......... 0% 1.95M 4s 50K .......... .......... .......... .......... .......... 1% 2.04M 4s 100K .......... .......... .......... .......... .......... 2% 11.6M 3s 150K .......... .......... .......... .......... .......... 2% 3.07M 2s 200K .......... .......... .......... .......... .......... 3% 9.63M 2s 250K .......... .......... .......... .......... .......... 4% 12.4M 2s 300K .......... .......... .......... .......... .......... 4% 1.16M 2s 350K .......... .......... .......... .......... .......... 5% 11.9M 2s 400K .......... .......... .......... .......... .......... 6% 188M 2s 450K .......... .......... .......... .......... .......... 6% 193M 2s 500K .......... .......... .......... .......... .......... 7% 7.78M 2s 550K .......... .......... .......... .......... .......... 8% 179M 1s 600K .......... .......... .......... .......... .......... 8% 7.27M 1s 650K .......... .......... .......... .......... .......... 9% 6.10M 1s 700K .......... .......... .......... .......... .......... 10% 11.9M 1s 750K .......... .......... .......... .......... .......... 10% 6.21M 1s 800K .......... .......... .......... .......... .......... 11% 1.63M 1s 850K .......... .......... .......... .......... .......... 12% 174M 1s 900K .......... .......... .......... .......... .......... 12% 229M 1s 950K .......... .......... .......... .......... .......... 13% 240M 1s 1000K .......... .......... .......... .......... .......... 14% 228M 1s 1050K .......... .......... .......... .......... .......... 14% 5.96M 1s 1100K .......... .......... .......... .......... .......... 15% 9.75M 1s 1150K .......... .......... .......... .......... .......... 16% 4.48M 1s 1200K .......... .......... .......... .......... .......... 17% 6.03M 1s 1250K .......... .......... .......... .......... .......... 17% 12.2M 1s 1300K .......... .......... .......... .......... .......... 18% 6.19M 1s 1350K .......... .......... .......... .......... .......... 19% 4.02M 1s 1400K .......... .......... .......... .......... .......... 19% 12.2M 1s 1450K .......... .......... .......... .......... .......... 20% 12.0M 1s 1500K .......... .......... .......... .......... .......... 21% 2.74M 1s 1550K .......... .......... .......... .......... .......... 21% 11.6M 1s 1600K .......... .......... .......... .......... .......... 22% 12.3M 1s 1650K .......... .......... .......... .......... .......... 23% 3.29M 1s 1700K .......... .......... .......... .......... .......... 23% 6.10M 1s 1750K .......... .......... .......... .......... .......... 24% 12.2M 1s 1800K .......... .......... .......... .......... .......... 25% 6.10M 1s 1850K .......... .......... .......... .......... .......... 25% 4.06M 1s 1900K .......... .......... .......... .......... .......... 26% 12.2M 1s 1950K .......... .......... .......... .......... .......... 27% 6.11M 1s 2000K .......... .......... .......... .......... .......... 27% 4.07M 1s 2050K .......... .......... .......... .......... .......... 28% 11.6M 1s 2100K .......... .......... .......... .......... .......... 29% 6.25M 1s 2150K .......... .......... .......... .......... .......... 29% 6.02M 1s 2200K .......... .......... .......... .......... .......... 30% 4.10M 1s 2250K .......... .......... .......... .......... .......... 31% 12.2M 1s 2300K .......... .......... .......... .......... .......... 31% 6.11M 1s 2350K .......... .......... .......... .......... .......... 32% 3.48M 1s 2400K .......... .......... .......... .......... .......... 33% 12.2M 1s 2450K .......... .......... .......... .......... .......... 34% 6.11M 1s 2500K .......... .......... .......... .......... .......... 34% 6.02M 1s 2550K .......... .......... .......... .......... .......... 35% 6.09M 1s 2600K .......... .......... .......... .......... .......... 36% 7.10M 1s 2650K .......... .......... .......... .......... .......... 36% 5.43M 1s 2700K .......... .......... .......... .......... .......... 37% 6.08M 1s 2750K .......... .......... .......... .......... .......... 38% 6.11M 1s 2800K .......... .......... .......... .......... .......... 38% 11.8M 1s 2850K .......... .......... .......... .......... .......... 39% 4.11M 1s 2900K .......... .......... .......... .......... .......... 40% 6.01M 1s 2950K .......... .......... .......... .......... .......... 40% 12.2M 1s 3000K .......... .......... .......... .......... .......... 41% 6.20M 1s 3050K .......... .......... .......... .......... .......... 42% 4.44M 1s 3100K .......... .......... .......... .......... .......... 42% 13.0M 1s 3150K .......... .......... .......... .......... .......... 43% 8.41M 1s 3200K .......... .......... .......... .......... .......... 44% 3.92M 1s 3250K .......... .......... .......... .......... .......... 44% 6.94M 1s 3300K .......... .......... .......... .......... .......... 45% 7.09M 1s 3350K .......... .......... .......... .......... .......... 46% 5.96M 1s 3400K .......... .......... .......... .......... .......... 46% 4.12M 1s 3450K .......... .......... .......... .......... .......... 47% 12.1M 1s 3500K .......... .......... .......... .......... .......... 48% 12.2M 1s 3550K .......... .......... .......... .......... .......... 49% 3.05M 1s 3600K .......... .......... .......... .......... .......... 49% 11.9M 1s 3650K .......... .......... .......... .......... .......... 50% 12.3M 1s 3700K .......... .......... .......... .......... .......... 51% 4.09M 1s 3750K .......... .......... .......... .......... .......... 51% 6.14M 1s 3800K .......... .......... .......... .......... .......... 52% 11.9M 1s 3850K .......... .......... .......... .......... .......... 53% 6.19M 1s 3900K .......... .......... .......... .......... .......... 53% 5.34M 1s 3950K .......... .......... .......... .......... .......... 54% 4.11M 1s 4000K .......... .......... .......... .......... .......... 55% 9.76M 1s 4050K .......... .......... .......... .......... .......... 55% 6.01M 1s 4100K .......... .......... .......... .......... .......... 56% 6.21M 1s 4150K .......... .......... .......... .......... .......... 57% 11.8M 1s 4200K .......... .......... .......... .......... .......... 57% 6.20M 1s 4250K .......... .......... .......... .......... .......... 58% 6.10M 0s 4300K .......... .......... .......... .......... .......... 59% 6.08M 0s 4350K .......... .......... .......... .......... .......... 59% 6.09M 0s 4400K .......... .......... .......... .......... .......... 60% 6.15M 0s 4450K .......... .......... .......... .......... .......... 61% 4.06M 0s 4500K .......... .......... .......... .......... .......... 61% 11.9M 0s 4550K .......... .......... .......... .......... .......... 62% 6.19M 0s 4600K .......... .......... .......... .......... .......... 63% 11.8M 0s 4650K .......... .......... .......... .......... .......... 63% 4.11M 0s 4700K .......... .......... .......... .......... .......... 64% 12.2M 0s 4750K .......... .......... .......... .......... .......... 65% 6.10M 0s 4800K .......... .......... .......... .......... .......... 66% 6.03M 0s 4850K .......... .......... .......... .......... .......... 66% 6.11M 0s 4900K .......... .......... .......... .......... .......... 67% 6.19M 0s 4950K .......... .......... .......... .......... .......... 68% 12.2M 0s 5000K .......... .......... .......... .......... .......... 68% 6.01M 0s 5050K .......... .......... .......... .......... .......... 69% 8.78M 0s 5100K .......... .......... .......... .......... .......... 70% 6.92M 0s 5150K .......... .......... .......... .......... .......... 70% 3.97M 0s 5200K .......... .......... .......... .......... .......... 71% 6.05M 0s 5250K .......... .......... .......... .......... .......... 72% 11.9M 0s 5300K .......... .......... .......... .......... .......... 72% 6.27M 0s 5350K .......... .......... .......... .......... .......... 73% 5.36M 0s 5400K .......... .......... .......... .......... .......... 74% 6.16M 0s 5450K .......... .......... .......... .......... .......... 74% 12.0M 0s 5500K .......... .......... .......... .......... .......... 75% 6.19M 0s 5550K .......... .......... .......... .......... .......... 76% 4.04M 0s 5600K .......... .......... .......... .......... .......... 76% 16.5M 0s 5650K .......... .......... .......... .......... .......... 77% 11.7M 0s 5700K .......... .......... .......... .......... .......... 78% 4.14M 0s 5750K .......... .......... .......... .......... .......... 78% 9.47M 0s 5800K .......... .......... .......... .......... .......... 79% 6.22M 0s 5850K .......... .......... .......... .......... .......... 80% 6.11M 0s 5900K .......... .......... .......... .......... .......... 80% 6.86M 0s 5950K .......... .......... .......... .......... .......... 81% 6.09M 0s 6000K .......... .......... .......... .......... .......... 82% 12.3M 0s 6050K .......... .......... .......... .......... .......... 83% 4.10M 0s 6100K .......... .......... .......... .......... .......... 83% 11.9M 0s 6150K .......... .......... .......... .......... .......... 84% 6.19M 0s 6200K .......... .......... .......... .......... .......... 85% 6.11M 0s 6250K .......... .......... .......... .......... .......... 85% 11.8M 0s 6300K .......... .......... .......... .......... .......... 86% 6.11M 0s 6350K .......... .......... .......... .......... .......... 87% 6.10M 0s 6400K .......... .......... .......... .......... .......... 87% 4.94M 0s 6450K .......... .......... .......... .......... .......... 88% 11.9M 0s 6500K .......... .......... .......... .......... .......... 89% 6.07M 0s 6550K .......... .......... .......... .......... .......... 89% 6.23M 0s 6600K .......... .......... .......... .......... .......... 90% 6.10M 0s 6650K .......... .......... .......... .......... .......... 91% 6.11M 0s 6700K .......... .......... .......... .......... .......... 91% 11.6M 0s 6750K .......... .......... .......... .......... .......... 92% 4.14M 0s 6800K .......... .......... .......... .......... .......... 93% 6.09M 0s 6850K .......... .......... .......... .......... .......... 93% 6.11M 0s 6900K .......... .......... .......... .......... .......... 94% 12.2M 0s 6950K .......... .......... .......... .......... .......... 95% 12.2M 0s 7000K .......... .......... .......... .......... .......... 95% 6.02M 0s 7050K .......... .......... .......... .......... .......... 96% 6.08M 0s 7100K .......... .......... .......... .......... .......... 97% 11.8M 0s 7150K .......... .......... .......... .......... .......... 98% 5.01M 0s 7200K .......... .......... .......... .......... .......... 98% 5.44M 0s 7250K .......... .......... .......... .......... .......... 99% 5.96M 0s 7300K .......... .......... .......... .......... ...... 100% 11.3M=1.1s 2024-06-18 16:25:37 (6.28 MB/s) - '/home/autobuild/autobuild/instance-9/output-1/build/.gnuplot-6.0.0.tar.gz.W0JyIx/output' saved [7522870/7522870] gnuplot-6.0.0.tar.gz: OK (md5: 10246eb96bbf3a151d6eb9bbcc223e4e) gnuplot-6.0.0.tar.gz: OK (sha1: 3abea0cccad89b0c8fb6619ad51b83a971ee24b9) gnuplot-6.0.0.tar.gz: OK (sha256: 635a28f0993f6ab0d1179e072ad39b8139d07f51237f841d93c6c2ff4b1758ec) >>> gnuplot 6.0.0 Extracting gzip -d -c /home/autobuild/autobuild/instance-9/dl/gnuplot/gnuplot-6.0.0.tar.gz | tar --strip-components=1 -C /home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0 -xf - >>> gnuplot 6.0.0 Patching Applying 0001-configure-add-without-demo-option.patch using patch: patching file configure.ac patching file Makefile.am >>> gnuplot 6.0.0 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0 -name $file); do cp support/gnuconfig/$file $i; done; done >>> gnuplot 6.0.0 Configuring >>> gnuplot 6.0.0 Autoreconfiguring >>> gnuplot 6.0.0 Patching libtool (cd /home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/ && rm -rf config.cache && GIT_DIR=. PATH="/home/autobuild/autobuild/instance-9/output-1/host/bin:/home/autobuild/autobuild/instance-9/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" AR="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc-ar" AS="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-as" LD="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-ld" NM="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc-nm" CC="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc" GCC="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc" CPP="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-cpp" CXX="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-g++" FC="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gfortran" F77="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gfortran" RANLIB="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc-ranlib" READELF="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-readelf" STRIP="/bin/true" OBJCOPY="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-objcopy" OBJDUMP="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/autobuild/autobuild/instance-9/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-9/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-9/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/autobuild/autobuild/instance-9/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-9/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-as" DEFAULT_LINKER="/home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 " LDFLAGS="" FCFLAGS=" -O3 -g0" FFLAGS=" -O3 -g0" PKG_CONFIG="/home/autobuild/autobuild/instance-9/output-1/host/bin/pkg-config" STAGING_DIR="/home/autobuild/autobuild/instance-9/output-1/host/microblazeel-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=microblazeel-buildroot-linux-gnu --host=microblazeel-buildroot-linux-gnu --build=aarch64-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --enable-shared --without-x --disable-raise-console --disable-mouse --without-tutorial --disable-demo --without-row-help --disable-history-file --disable-wxwidgets --without-lua --without-latex --without-cairo --without-qt --without-gd --with-readline=gnu ) checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for microblazeel-buildroot-linux-gnu-strip... /bin/true checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports the include directive... yes (GNU style) checking for microblazeel-buildroot-linux-gnu-gcc... /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc accepts -g... yes checking for /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc option to enable C11 features... none needed checking whether /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc understands -c and -o together... yes checking dependency style of /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking for sys/select.h... yes checking for sys/socket.h... yes checking for vfork.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for microblazeel-buildroot-linux-gnu-gcc... (cached) /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc checking whether the compiler supports GNU C... (cached) yes checking whether /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc accepts -g... (cached) yes checking for /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc option to enable C11 features... (cached) none needed checking whether /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc understands -c and -o together... (cached) yes checking dependency style of /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc... (cached) none checking how to run the C preprocessor... /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-cpp checking for microblazeel-buildroot-linux-gnu-gcc... microblazeel-buildroot-linux-gnu-gcc checking whether the compiler supports GNU Objective C... no checking whether microblazeel-buildroot-linux-gnu-gcc accepts -g... no checking dependency style of microblazeel-buildroot-linux-gnu-gcc... none checking for an ANSI C-conforming const... yes checking for inline... inline checking whether ln -s works... yes checking for off_t... yes checking for declarations of fseeko and ftello... yes checking for /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc option to enable large file support... none needed checking for struct tm.tm_gmtoff... yes checking for struct tm.__tm_gmtoff... no checking pkg-config is at least version 0.9.0... yes checking for LIBCERF... configure: WARNING: Package requirements (libcerf) were not met: Package 'libcerf', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBCERF_CFLAGS and LIBCERF_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. checking for library containing cdawson... no checking for amos libraries using LDFLAGS: ... checking for library containing zairy_... no checking for library containing cexint_... no checking for emacs... no checking for xemacs... no checking for dvips... dvips checking for kpsewhich... kpsewhich checking for texhash... texhash checking for X... disabled checking for egrep -e... /usr/bin/grep -E checking for MS-DOS/djgpp/libGRX... no checking for Mac OS X... no checking for BeOS... no checking for Alpha/AXP CPU... no checking for sin... no checking for sin in -lm... yes checking for dirent.h... yes checking for errno.h... yes checking for float.h... yes checking for langinfo.h... yes checking for limits.h... yes checking for locale.h... yes checking for math.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for time.h... yes checking for sys/time.h... yes checking for sys/types.h... (cached) yes checking for sys/bsdtypes.h... no checking for sys/ioctl.h... yes checking for sys/param.h... yes checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking for sys/stat.h... (cached) yes checking for sys/systeminfo.h... no checking for sys/timeb.h... yes checking for sys/utsname.h... yes checking for libc.h... no checking for malloc.h... yes checking for poll.h... yes checking for sgtty.h... yes checking for termios.h... yes checking for values.h... yes checking for dirent.h... (cached) yes checking for inttypes.h... (cached) yes checking for dlfcn.h... yes checking for dl.h... no checking for _Bool... yes checking for stdbool.h that conforms to C99 or later... yes checking whether stat file-mode macros are broken... no checking for sys/wait.h that is POSIX.1 compatible... yes checking for library containing dlopen... none required checking for unistd.h... yes checking if errno variable is declared... yes checking for size_t... yes checking for time_t in time.h... yes checking for atexit... yes checking for memcpy... yes checking for memmove... yes checking for memset... yes checking for on_exit... yes checking for bcopy... yes checking for bzero... yes checking for setvbuf... yes checking for strerror... yes checking for strchr... yes checking for strrchr... yes checking for strstr... yes checking for index... yes checking for rindex... yes checking for erf... yes checking for erfc... yes checking for gamma... yes checking for lgamma... yes checking for tgamma... yes checking for getcwd... yes checking for poll... yes checking for pclose... yes checking for popen... yes checking for fdopen... yes checking for select... yes checking for sleep... yes checking for stpcpy... yes checking for strcspn... yes checking for strdup... yes checking for strndup... yes checking for strnlen... yes checking for strcasecmp... yes checking for stricmp... no checking for strncasecmp... yes checking for strnicmp... no checking for sysinfo... yes checking for tcgetattr... yes checking for vfprintf... yes checking for doprnt... no checking for uname... yes checking for usleep... yes checking for cbrt... yes checking for jn... yes checking for /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc options needed to detect all undeclared functions... none needed checking whether signgam is declared... yes checking for complex.h... yes checking for csqrt... yes checking for cexp... yes checking for cabs... yes checking for clog... yes checking for fenv.h... yes checking for sigsetjmp... yes checking if malloc(0) returns 0... yes checking types of arguments for select... int,fd_set *,struct timeval * checking for tputs in -lncurses... yes checking for remove_history in -lreadline... yes checking for library containing rl_ding... -lreadline checking for library containing rl_forced_update_display... none required checking for library containing rl_reset_after_signal... none required checking for library containing _rl_signal_handler... none required checking for library containing rl_pending_signal... none required checking for library containing rl_complete_with_tilde_expansion... none required checking for readline/readline.h... yes checking for readline/history.h... yes checking for mergesort... no checking for gnu_get_libc_version... yes checking for deflate in -lz... yes checking for zlib.h... yes checking for library containing iconv_open... none required checking for iconv.h... yes checking for multi-byte support in x11... checking for XmbDrawString in -lX11... no checking whether the compiler supports GNU C++... no checking whether no accepts -g... no checking for no option to enable C++11 features... unsupported checking for no option to enable C++98 features... unsupported checking dependency style of no... none ./configure: line 16856: Enable: command not found checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config/Makefile config.status: creating demo/Makefile config.status: creating demo/plugin/Makefile config.status: creating docs/Makefile config.status: creating m4/Makefile config.status: creating man/Makefile config.status: creating man/ja/Makefile config.status: creating share/Makefile config.status: creating share/LaTeX/Makefile config.status: creating src/Makefile config.status: creating src/beos/Makefile config.status: creating src/wxterminal/Makefile config.status: creating src/qtterminal/Makefile config.status: creating term/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing default commands ** Configuration summary for gnuplot 6.0.0: gnuplot will be compiled with the following terminals: Standalone terminals: yes (included by default) canvas cgm context dumb dxf emf epslatex fig hpgl pcl5 postscript pict2e pslatex pstex pstricks svg texdraw tkcanvas Dot-matrix terminals: no (use --with-bitmap-terminals to enable) These would include, if enabled printers: epson nec okidata tandy seiko dpu414 hp500c hpdj hpljii hppj starc other: block pbm Tektronix terminal emulators: yes ( --without-tektronix to disable) tek410x tek40 vttek xterm kc_tek40 km_tek40 selanar bitgraph sixeltek (not needed for sixel graphics output to vt100-series emulators) Platform-specific, legacy, or specialized terminals omitted by default: gpic : no (use --with-gpic to enable) tgif : no (use --with-tgif to enable) metafont : no (use --with-metafont to enable) metapost : no (use --with-metapost to enable) ReGIS : no (use --with-regis to enable) caca : no (use --with-caca to enable) aqua : no (macOS only) Other terminals that can be enabled but have no ./configure option: eepic, emtex, hp2623a, hp2648, imagen, kyocera, latex, mif, tpic qms, pm (makefile.os2), be (BeOS), svga (MSDOS/djgpp), windows x11 (X Window System) : no (requires X libraries) libgd-based png jpeg gif sixel: no (requires libgd, see config.log) cairo-based terminals: no (requires cairo>=1.2, pango>=1.22, glib>=2.28) webp : no (requires cairo, pango, libwebp, libwebpmux) lua/TikZ : no wxt : no (requires C++, wxWidgets>2.6, cairo>0.9, pango>1.22) Qt : no (use --with-qt or --with-qt=qt4 or --with-qt=qt5 to enable gnuplot will be compiled with the following configurable features: Readline library: GNU readline library with -lncurses Command-line history file: no Add code to ensure pm3d depth sorting is stable: no (not needed) Mouse support in interactive terminals: no Typing in plot window raises console: no cerf() and other special functions: no (libcerf not found) Complex Airy and Bessel functions: no (requires libopenspec or libamos Complex exponential integral cexint (libamos): no plugin support for loading external functions: yes Allow deprecated syntax: no Statistical summary of data ("stats" command): yes Support watchpoints during 2D plotting: yes Support for polar gridded surfaces: yes Support function blocks: yes Support concave hulls: yes gnuplot will install the following additional materials: TeX files will not be installed PostScript prologue files: ${datarootdir}/gnuplot/6.0/PostScript/ Help file: ${datarootdir}/gnuplot/6.0/gnuplot.gih >>> gnuplot 6.0.0 Building GIT_DIR=. PATH="/home/autobuild/autobuild/instance-9/output-1/host/bin:/home/autobuild/autobuild/instance-9/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/make/make -j1 -C /home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/ make[1]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0' /home/autobuild/make/make all-recursive make[2]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0' Making all in config make[3]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/config' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/config' Making all in m4 make[3]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/m4' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/m4' Making all in term make[3]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/term' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/term' Making all in src make[3]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src' Making timestamp.h fatal: not a git repository: '../.git' /home/autobuild/make/make all-recursive make[4]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src' Making all in wxterminal make[5]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src/wxterminal' make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src/wxterminal' Making all in qtterminal make[5]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src/qtterminal' make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src/qtterminal' make[5]: Entering directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src' /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o alloc.o alloc.c /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o amos_airy.o amos_airy.c /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o axis.o axis.c /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o breaders.o breaders.c /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o boundary.o boundary.c /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o color.o color.c /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o command.o command.c /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o contour.o contour.c /home/autobuild/autobuild/instance-9/output-1/host/bin/microblazeel-buildroot-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/6.0\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/6.0/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/6.0/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/6.0/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/6.0/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/libexec/gnuplot/6.0\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -c -o complexfun.o complexfun.c complexfun.c: In function 'Igamma': complexfun.c:92:26: error: 'FE_UNDERFLOW' undeclared (first use in this function) 92 | if (fetestexcept(FE_UNDERFLOW)) { \ | ^~~~~~~~~~~~ complexfun.c:541:5: note: in expansion of macro 'handle_underflow' 541 | handle_underflow("Igamma", arg); | ^~~~~~~~~~~~~~~~ complexfun.c:92:26: note: each undeclared identifier is reported only once for each function it appears in 92 | if (fetestexcept(FE_UNDERFLOW)) { \ | ^~~~~~~~~~~~ complexfun.c:541:5: note: in expansion of macro 'handle_underflow' 541 | handle_underflow("Igamma", arg); | ^~~~~~~~~~~~~~~~ make[5]: *** [Makefile:1034: complexfun.o] Error 1 make[5]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src' make[4]: *** [Makefile:1088: all-recursive] Error 1 make[4]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src' make[3]: *** [Makefile:732: all] Error 2 make[3]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/src' make[2]: *** [Makefile:428: all-recursive] Error 1 make[2]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0' make[1]: *** [Makefile:367: all] Error 2 make[1]: Leaving directory '/home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0' make: *** [package/pkg-generic.mk:283: /home/autobuild/autobuild/instance-9/output-1/build/gnuplot-6.0.0/.stamp_built] Error 2 make: Leaving directory '/home/autobuild/autobuild/instance-9/buildroot'