Hunk #3 succeeded at 6794 (offset 240 lines). Hunk #4 succeeded at 6804 (offset 240 lines). Hunk #5 succeeded at 7097 (offset 240 lines). Hunk #6 succeeded at 7389 (offset 240 lines). Hunk #7 succeeded at 8359 (offset 247 lines). Hunk #8 succeeded at 10991 (offset 281 lines). >>> pcre2 10.37 Configuring (cd /home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ar" AS="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-as" LD="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ld" NM="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-nm" CC="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc" GCC="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc" CPP="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-cpp" CXX="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-g++" FC="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gfortran" F77="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gfortran" RANLIB="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ranlib" READELF="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-readelf" STRIP="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-strip" OBJCOPY="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-1/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-1/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-1/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-elf2flt=-r -static" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-elf2flt=-r -static -Wl,-elf2flt=-r -static" LDFLAGS=" -Wl,-elf2flt=-r -static" FCFLAGS=" -Os -g0 -Wl,-elf2flt=-r -static" FFLAGS=" -Os -g0 -Wl,-elf2flt=-r -static" PKG_CONFIG="/home/buildroot/autobuild/instance-1/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-uclinux-uclibcgnueabi --host=arm-buildroot-uclinux-uclibcgnueabi --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared --enable-pcre2-8 --disable-pcre2-16 --disable-pcre2-32 --disable-jit --disable-pcre2grep-callout ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-uclinux-uclibcgnueabi-strip... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-strip checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for arm-buildroot-uclinux-uclibcgnueabi-gcc... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc accepts -g... yes checking for /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc option to enable C11 features... none needed checking whether /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for arm-buildroot-uclinux-uclibcgnueabi-ar... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ar checking the archiver (/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ar) interface... ar checking for int64_t... yes checking build system type... x86_64-pc-linux-gnu checking host system type... arm-buildroot-uclinux-uclibcgnueabi checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ld checking if the linker (/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-nm checking the name lister (/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arm-buildroot-uclinux-uclibcgnueabi format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ld option to reload object files... -r checking for arm-buildroot-uclinux-uclibcgnueabi-objdump... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-objdump checking how to recognize dependent libraries... unknown checking for arm-buildroot-uclinux-uclibcgnueabi-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-buildroot-uclinux-uclibcgnueabi-ar... (cached) /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ar checking for archiver @FILE support... @ checking for arm-buildroot-uclinux-uclibcgnueabi-strip... (cached) /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-strip checking for arm-buildroot-uclinux-uclibcgnueabi-ranlib... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ranlib checking command to parse /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-nm output from /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-buildroot-uclinux-uclibcgnueabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for dlfcn.h... no checking for objdir... .libs checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc static flag -static works... yes checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc linker (/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ld) supports shared libraries... yes checking dynamic linker characteristics... no checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... no checking whether to build shared libraries... no checking whether to build static libraries... yes checking whether ln -s works... yes checking whether the -Werror option is usable... yes checking for simple visibility declarations... yes checking for __attribute__((uninitialized))... no checking for limits.h... yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for dirent.h... yes checking for windows.h... no checking for sys/wait.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking for bcopy... yes checking for memfd_create... no checking for memmove... yes checking for mkostemp... yes checking for secure_getenv... yes checking for strerror... yes checking for zlib.h... yes checking for gzopen in -lz... yes checking for bzlib.h... no checking for libbz2... no checking whether Intel CET is enabled... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating libpcre2-8.pc config.status: creating libpcre2-16.pc config.status: creating libpcre2-32.pc config.status: creating libpcre2-posix.pc config.status: creating pcre2-config config.status: creating src/pcre2.h config.status: creating src/config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing script-chmod commands config.status: executing delete-old-chartables commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls pcre2-10.37 configuration summary: Install prefix ..................... : /usr C preprocessor ..................... : /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-cpp C compiler ......................... : /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc Linker ............................. : /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ld C preprocessor flags ............... : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 C compiler flags ................... : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-elf2flt=-r -static -fvisibility=hidden Linker flags ....................... : -Wl,-elf2flt=-r -static Extra libraries .................... : Build 8-bit pcre2 library .......... : yes Build 16-bit pcre2 library ......... : no Build 32-bit pcre2 library ......... : no Include debugging code ............. : no Enable JIT compiling support ....... : no Use SELinux allocator in JIT ....... : unsupported Enable Unicode support ............. : yes Newline char/sequence .............. : lf \R matches only ANYCRLF ............ : no \C is disabled ..................... : no EBCDIC coding ...................... : no EBCDIC code for NL ................. : n/a Rebuild char tables ................ : no Internal link size ................. : 2 Nested parentheses limit ........... : 250 Heap limit ......................... : 20000000 kibibytes Match limit ........................ : 10000000 Match depth limit .................. : MATCH_LIMIT Build shared libs .................. : no Build static libs .................. : yes Use JIT in pcre2grep ............... : no Enable callouts in pcre2grep ....... : no Enable fork in pcre2grep callouts .. : no Initial buffer size for pcre2grep .. : 20480 Maximum buffer size for pcre2grep .. : 1048576 Link pcre2grep with libz ........... : no Link pcre2grep with libbz2 ......... : no Link pcre2test with libedit ........ : no Link pcre2test with libreadline .... : no Valgrind support ................... : no Code coverage ...................... : no Fuzzer support ..................... : no Use %zu and %td .................... : auto >>> pcre2 10.37 Building PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' rm -f src/pcre2_chartables.c ln -s /home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37/src/pcre2_chartables.c.dist /home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37/src/pcre2_chartables.c /usr/bin/make all-am make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' CC src/pcre2grep-pcre2grep.o CC src/libpcre2_8_la-pcre2_auto_possess.lo CC src/libpcre2_8_la-pcre2_compile.lo CC src/libpcre2_8_la-pcre2_config.lo CC src/libpcre2_8_la-pcre2_context.lo CC src/libpcre2_8_la-pcre2_convert.lo CC src/libpcre2_8_la-pcre2_dfa_match.lo CC src/libpcre2_8_la-pcre2_error.lo CC src/libpcre2_8_la-pcre2_extuni.lo CC src/libpcre2_8_la-pcre2_find_bracket.lo CC src/libpcre2_8_la-pcre2_jit_compile.lo CC src/libpcre2_8_la-pcre2_maketables.lo CC src/libpcre2_8_la-pcre2_match.lo CC src/libpcre2_8_la-pcre2_match_data.lo CC src/libpcre2_8_la-pcre2_newline.lo CC src/libpcre2_8_la-pcre2_ord2utf.lo CC src/libpcre2_8_la-pcre2_pattern_info.lo CC src/libpcre2_8_la-pcre2_script_run.lo CC src/libpcre2_8_la-pcre2_serialize.lo CC src/libpcre2_8_la-pcre2_string_utils.lo CC src/libpcre2_8_la-pcre2_study.lo CC src/libpcre2_8_la-pcre2_substitute.lo CC src/libpcre2_8_la-pcre2_substring.lo CC src/libpcre2_8_la-pcre2_tables.lo CC src/libpcre2_8_la-pcre2_ucd.lo CC src/libpcre2_8_la-pcre2_valid_utf.lo CC src/libpcre2_8_la-pcre2_xclass.lo CC src/libpcre2_8_la-pcre2_chartables.lo CC src/pcre2test-pcre2test.o CC src/libpcre2_posix_la-pcre2posix.lo CCLD libpcre2-8.la CCLD libpcre2-posix.la CCLD pcre2grep CCLD pcre2test make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' >>> pcre2 10.37 Installing to staging directory PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot install -C /home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' /usr/bin/make install-am make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/doc/pcre2' /bin/bash ./libtool --mode=install /usr/bin/install -c libpcre2-8.la libpcre2-posix.la '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib' /usr/bin/install -c pcre2-config '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/doc/pcre2/html' /usr/bin/install -c -m 644 AUTHORS COPYING ChangeLog LICENCE NEWS README doc/pcre2.txt doc/pcre2-config.txt doc/pcre2grep.txt doc/pcre2test.txt '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/doc/pcre2' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include' /usr/bin/install -c -m 644 doc/html/NON-AUTOTOOLS-BUILD.txt doc/html/README.txt doc/html/index.html doc/html/pcre2-config.html doc/html/pcre2.html doc/html/pcre2_callout_enumerate.html doc/html/pcre2_code_copy.html doc/html/pcre2_code_copy_with_tables.html doc/html/pcre2_code_free.html doc/html/pcre2_compile.html doc/html/pcre2_compile_context_copy.html doc/html/pcre2_compile_context_create.html doc/html/pcre2_compile_context_free.html doc/html/pcre2_config.html doc/html/pcre2_convert_context_copy.html doc/html/pcre2_convert_context_create.html doc/html/pcre2_convert_context_free.html doc/html/pcre2_converted_pattern_free.html doc/html/pcre2_dfa_match.html doc/html/pcre2_general_context_copy.html doc/html/pcre2_general_context_create.html doc/html/pcre2_general_context_free.html doc/html/pcre2_get_error_message.html doc/html/pcre2_get_mark.html doc/html/pcre2_get_match_data_size.html doc/html/pcre2_get_ovector_count.html doc/html/pcre2_get_ovector_pointer.html doc/html/pcre2_get_startchar.html doc/html/pcre2_jit_compile.html doc/html/pcre2_jit_free_unused_memory.html doc/html/pcre2_jit_match.html doc/html/pcre2_jit_stack_assign.html doc/html/pcre2_jit_stack_create.html doc/html/pcre2_jit_stack_free.html doc/html/pcre2_maketables.html doc/html/pcre2_maketables_free.html doc/html/pcre2_match.html doc/html/pcre2_match_context_copy.html doc/html/pcre2_match_context_create.html doc/html/pcre2_match_context_free.html '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/doc/pcre2/html' /usr/bin/install -c -m 644 src/pcre2posix.h '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man1' /usr/bin/install -c -m 644 doc/html/pcre2_match_data_create.html doc/html/pcre2_match_data_create_from_pattern.html doc/html/pcre2_match_data_free.html doc/html/pcre2_pattern_convert.html doc/html/pcre2_pattern_info.html doc/html/pcre2_serialize_decode.html doc/html/pcre2_serialize_encode.html doc/html/pcre2_serialize_free.html doc/html/pcre2_serialize_get_number_of_codes.html doc/html/pcre2_set_bsr.html doc/html/pcre2_set_callout.html doc/html/pcre2_set_character_tables.html doc/html/pcre2_set_compile_extra_options.html doc/html/pcre2_set_compile_recursion_guard.html doc/html/pcre2_set_depth_limit.html doc/html/pcre2_set_glob_escape.html doc/html/pcre2_set_glob_separator.html doc/html/pcre2_set_heap_limit.html doc/html/pcre2_set_match_limit.html doc/html/pcre2_set_max_pattern_length.html doc/html/pcre2_set_offset_limit.html doc/html/pcre2_set_newline.html doc/html/pcre2_set_parens_nest_limit.html doc/html/pcre2_set_recursion_limit.html doc/html/pcre2_set_recursion_memory_management.html doc/html/pcre2_set_substitute_callout.html doc/html/pcre2_substitute.html doc/html/pcre2_substring_copy_byname.html doc/html/pcre2_substring_copy_bynumber.html doc/html/pcre2_substring_free.html doc/html/pcre2_substring_get_byname.html doc/html/pcre2_substring_get_bynumber.html doc/html/pcre2_substring_length_byname.html doc/html/pcre2_substring_length_bynumber.html doc/html/pcre2_substring_list_free.html doc/html/pcre2_substring_list_get.html doc/html/pcre2_substring_nametable_scan.html doc/html/pcre2_substring_number_from_name.html doc/html/pcre2api.html doc/html/pcre2build.html '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/doc/pcre2/html' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man3' /usr/bin/install -c -m 644 doc/html/pcre2callout.html doc/html/pcre2compat.html doc/html/pcre2convert.html doc/html/pcre2demo.html doc/html/pcre2grep.html doc/html/pcre2jit.html doc/html/pcre2limits.html doc/html/pcre2matching.html doc/html/pcre2partial.html doc/html/pcre2pattern.html doc/html/pcre2perform.html doc/html/pcre2posix.html doc/html/pcre2sample.html doc/html/pcre2serialize.html doc/html/pcre2syntax.html doc/html/pcre2test.html doc/html/pcre2unicode.html '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/doc/pcre2/html' /usr/bin/install -c -m 644 doc/pcre2-config.1 doc/pcre2grep.1 doc/pcre2test.1 '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man1' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 src/pcre2.h '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include' /usr/bin/install -c -m 644 libpcre2-8.pc libpcre2-posix.pc '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 doc/pcre2.3 doc/pcre2_callout_enumerate.3 doc/pcre2_code_copy.3 doc/pcre2_code_copy_with_tables.3 doc/pcre2_code_free.3 doc/pcre2_compile.3 doc/pcre2_compile_context_copy.3 doc/pcre2_compile_context_create.3 doc/pcre2_compile_context_free.3 doc/pcre2_config.3 doc/pcre2_convert_context_copy.3 doc/pcre2_convert_context_create.3 doc/pcre2_convert_context_free.3 doc/pcre2_converted_pattern_free.3 doc/pcre2_dfa_match.3 doc/pcre2_general_context_copy.3 doc/pcre2_general_context_create.3 doc/pcre2_general_context_free.3 doc/pcre2_get_error_message.3 doc/pcre2_get_mark.3 doc/pcre2_get_match_data_size.3 doc/pcre2_get_ovector_count.3 doc/pcre2_get_ovector_pointer.3 doc/pcre2_get_startchar.3 doc/pcre2_jit_compile.3 doc/pcre2_jit_free_unused_memory.3 doc/pcre2_jit_match.3 doc/pcre2_jit_stack_assign.3 doc/pcre2_jit_stack_create.3 doc/pcre2_jit_stack_free.3 doc/pcre2_maketables.3 doc/pcre2_maketables_free.3 doc/pcre2_match.3 doc/pcre2_match_context_copy.3 doc/pcre2_match_context_create.3 doc/pcre2_match_context_free.3 doc/pcre2_match_data_create.3 doc/pcre2_match_data_create_from_pattern.3 doc/pcre2_match_data_free.3 doc/pcre2_pattern_convert.3 '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man3' /usr/bin/install -c -m 644 doc/pcre2_pattern_info.3 doc/pcre2_serialize_decode.3 doc/pcre2_serialize_encode.3 doc/pcre2_serialize_free.3 doc/pcre2_serialize_get_number_of_codes.3 doc/pcre2_set_bsr.3 doc/pcre2_set_callout.3 doc/pcre2_set_character_tables.3 doc/pcre2_set_compile_extra_options.3 doc/pcre2_set_compile_recursion_guard.3 doc/pcre2_set_depth_limit.3 doc/pcre2_set_glob_escape.3 doc/pcre2_set_glob_separator.3 doc/pcre2_set_heap_limit.3 doc/pcre2_set_match_limit.3 doc/pcre2_set_max_pattern_length.3 doc/pcre2_set_offset_limit.3 doc/pcre2_set_newline.3 doc/pcre2_set_parens_nest_limit.3 doc/pcre2_set_recursion_limit.3 doc/pcre2_set_recursion_memory_management.3 doc/pcre2_set_substitute_callout.3 doc/pcre2_substitute.3 doc/pcre2_substring_copy_byname.3 doc/pcre2_substring_copy_bynumber.3 doc/pcre2_substring_free.3 doc/pcre2_substring_get_byname.3 doc/pcre2_substring_get_bynumber.3 doc/pcre2_substring_length_byname.3 doc/pcre2_substring_length_bynumber.3 doc/pcre2_substring_list_free.3 doc/pcre2_substring_list_get.3 doc/pcre2_substring_nametable_scan.3 doc/pcre2_substring_number_from_name.3 doc/pcre2api.3 doc/pcre2build.3 doc/pcre2callout.3 doc/pcre2compat.3 doc/pcre2convert.3 doc/pcre2demo.3 '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man3' /usr/bin/install -c -m 644 doc/pcre2jit.3 doc/pcre2limits.3 doc/pcre2matching.3 doc/pcre2partial.3 doc/pcre2pattern.3 doc/pcre2perform.3 doc/pcre2posix.3 doc/pcre2sample.3 doc/pcre2serialize.3 doc/pcre2syntax.3 doc/pcre2unicode.3 '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man3' libtool: install: /usr/bin/install -c .libs/libpcre2-8.lai /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpcre2-8.la libtool: install: /usr/bin/install -c .libs/libpcre2-posix.lai /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpcre2-posix.la libtool: install: /usr/bin/install -c .libs/libpcre2-8.a /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpcre2-8.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpcre2-8.a libtool: install: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ranlib /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpcre2-8.a libtool: install: /usr/bin/install -c .libs/libpcre2-posix.a /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpcre2-posix.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpcre2-posix.a libtool: install: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ranlib /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpcre2-posix.a libtool: warning: remember to run 'libtool --finish /usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c pcre2grep pcre2test '/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin' libtool: install: /usr/bin/install -c pcre2grep /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin/pcre2grep libtool: install: /usr/bin/install -c pcre2test /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin/pcre2test make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' >>> pcre2 10.37 Fixing package configuration files >>> pcre2 10.37 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> pcre2 10.37 Installing to target PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-1/output-1/target install -C /home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' /usr/bin/make install-am make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc/pcre2' /bin/bash ./libtool --mode=install /usr/bin/install -c libpcre2-8.la libpcre2-posix.la '/home/buildroot/autobuild/instance-1/output-1/target/usr/lib' /usr/bin/install -c -m 644 AUTHORS COPYING ChangeLog LICENCE NEWS README doc/pcre2.txt doc/pcre2-config.txt doc/pcre2grep.txt doc/pcre2test.txt '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc/pcre2' /usr/bin/install -c pcre2-config '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc/pcre2/html' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/include' /usr/bin/install -c -m 644 doc/html/NON-AUTOTOOLS-BUILD.txt doc/html/README.txt doc/html/index.html doc/html/pcre2-config.html doc/html/pcre2.html doc/html/pcre2_callout_enumerate.html doc/html/pcre2_code_copy.html doc/html/pcre2_code_copy_with_tables.html doc/html/pcre2_code_free.html doc/html/pcre2_compile.html doc/html/pcre2_compile_context_copy.html doc/html/pcre2_compile_context_create.html doc/html/pcre2_compile_context_free.html doc/html/pcre2_config.html doc/html/pcre2_convert_context_copy.html doc/html/pcre2_convert_context_create.html doc/html/pcre2_convert_context_free.html doc/html/pcre2_converted_pattern_free.html doc/html/pcre2_dfa_match.html doc/html/pcre2_general_context_copy.html doc/html/pcre2_general_context_create.html doc/html/pcre2_general_context_free.html doc/html/pcre2_get_error_message.html doc/html/pcre2_get_mark.html doc/html/pcre2_get_match_data_size.html doc/html/pcre2_get_ovector_count.html doc/html/pcre2_get_ovector_pointer.html doc/html/pcre2_get_startchar.html doc/html/pcre2_jit_compile.html doc/html/pcre2_jit_free_unused_memory.html doc/html/pcre2_jit_match.html doc/html/pcre2_jit_stack_assign.html doc/html/pcre2_jit_stack_create.html doc/html/pcre2_jit_stack_free.html doc/html/pcre2_maketables.html doc/html/pcre2_maketables_free.html doc/html/pcre2_match.html doc/html/pcre2_match_context_copy.html doc/html/pcre2_match_context_create.html doc/html/pcre2_match_context_free.html '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc/pcre2/html' /usr/bin/install -c -m 644 src/pcre2posix.h '/home/buildroot/autobuild/instance-1/output-1/target/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man3' /usr/bin/install -c -m 644 doc/html/pcre2_match_data_create.html doc/html/pcre2_match_data_create_from_pattern.html doc/html/pcre2_match_data_free.html doc/html/pcre2_pattern_convert.html doc/html/pcre2_pattern_info.html doc/html/pcre2_serialize_decode.html doc/html/pcre2_serialize_encode.html doc/html/pcre2_serialize_free.html doc/html/pcre2_serialize_get_number_of_codes.html doc/html/pcre2_set_bsr.html doc/html/pcre2_set_callout.html doc/html/pcre2_set_character_tables.html doc/html/pcre2_set_compile_extra_options.html doc/html/pcre2_set_compile_recursion_guard.html doc/html/pcre2_set_depth_limit.html doc/html/pcre2_set_glob_escape.html doc/html/pcre2_set_glob_separator.html doc/html/pcre2_set_heap_limit.html doc/html/pcre2_set_match_limit.html doc/html/pcre2_set_max_pattern_length.html doc/html/pcre2_set_offset_limit.html doc/html/pcre2_set_newline.html doc/html/pcre2_set_parens_nest_limit.html doc/html/pcre2_set_recursion_limit.html doc/html/pcre2_set_recursion_memory_management.html doc/html/pcre2_set_substitute_callout.html doc/html/pcre2_substitute.html doc/html/pcre2_substring_copy_byname.html doc/html/pcre2_substring_copy_bynumber.html doc/html/pcre2_substring_free.html doc/html/pcre2_substring_get_byname.html doc/html/pcre2_substring_get_bynumber.html doc/html/pcre2_substring_length_byname.html doc/html/pcre2_substring_length_bynumber.html doc/html/pcre2_substring_list_free.html doc/html/pcre2_substring_list_get.html doc/html/pcre2_substring_nametable_scan.html doc/html/pcre2_substring_number_from_name.html doc/html/pcre2api.html doc/html/pcre2build.html '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc/pcre2/html' /usr/bin/install -c -m 644 doc/html/pcre2callout.html doc/html/pcre2compat.html doc/html/pcre2convert.html doc/html/pcre2demo.html doc/html/pcre2grep.html doc/html/pcre2jit.html doc/html/pcre2limits.html doc/html/pcre2matching.html doc/html/pcre2partial.html doc/html/pcre2pattern.html doc/html/pcre2perform.html doc/html/pcre2posix.html doc/html/pcre2sample.html doc/html/pcre2serialize.html doc/html/pcre2syntax.html doc/html/pcre2test.html doc/html/pcre2unicode.html '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc/pcre2/html' /usr/bin/install -c -m 644 doc/pcre2-config.1 doc/pcre2grep.1 doc/pcre2test.1 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 src/pcre2.h '/home/buildroot/autobuild/instance-1/output-1/target/usr/include' /usr/bin/install -c -m 644 libpcre2-8.pc libpcre2-posix.pc '/home/buildroot/autobuild/instance-1/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 doc/pcre2.3 doc/pcre2_callout_enumerate.3 doc/pcre2_code_copy.3 doc/pcre2_code_copy_with_tables.3 doc/pcre2_code_free.3 doc/pcre2_compile.3 doc/pcre2_compile_context_copy.3 doc/pcre2_compile_context_create.3 doc/pcre2_compile_context_free.3 doc/pcre2_config.3 doc/pcre2_convert_context_copy.3 doc/pcre2_convert_context_create.3 doc/pcre2_convert_context_free.3 doc/pcre2_converted_pattern_free.3 doc/pcre2_dfa_match.3 doc/pcre2_general_context_copy.3 doc/pcre2_general_context_create.3 doc/pcre2_general_context_free.3 doc/pcre2_get_error_message.3 doc/pcre2_get_mark.3 doc/pcre2_get_match_data_size.3 doc/pcre2_get_ovector_count.3 doc/pcre2_get_ovector_pointer.3 doc/pcre2_get_startchar.3 doc/pcre2_jit_compile.3 doc/pcre2_jit_free_unused_memory.3 doc/pcre2_jit_match.3 doc/pcre2_jit_stack_assign.3 doc/pcre2_jit_stack_create.3 doc/pcre2_jit_stack_free.3 doc/pcre2_maketables.3 doc/pcre2_maketables_free.3 doc/pcre2_match.3 doc/pcre2_match_context_copy.3 doc/pcre2_match_context_create.3 doc/pcre2_match_context_free.3 doc/pcre2_match_data_create.3 doc/pcre2_match_data_create_from_pattern.3 doc/pcre2_match_data_free.3 doc/pcre2_pattern_convert.3 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man3' /usr/bin/install -c -m 644 doc/pcre2_pattern_info.3 doc/pcre2_serialize_decode.3 doc/pcre2_serialize_encode.3 doc/pcre2_serialize_free.3 doc/pcre2_serialize_get_number_of_codes.3 doc/pcre2_set_bsr.3 doc/pcre2_set_callout.3 doc/pcre2_set_character_tables.3 doc/pcre2_set_compile_extra_options.3 doc/pcre2_set_compile_recursion_guard.3 doc/pcre2_set_depth_limit.3 doc/pcre2_set_glob_escape.3 doc/pcre2_set_glob_separator.3 doc/pcre2_set_heap_limit.3 doc/pcre2_set_match_limit.3 doc/pcre2_set_max_pattern_length.3 doc/pcre2_set_offset_limit.3 doc/pcre2_set_newline.3 doc/pcre2_set_parens_nest_limit.3 doc/pcre2_set_recursion_limit.3 doc/pcre2_set_recursion_memory_management.3 doc/pcre2_set_substitute_callout.3 doc/pcre2_substitute.3 doc/pcre2_substring_copy_byname.3 doc/pcre2_substring_copy_bynumber.3 doc/pcre2_substring_free.3 doc/pcre2_substring_get_byname.3 doc/pcre2_substring_get_bynumber.3 doc/pcre2_substring_length_byname.3 doc/pcre2_substring_length_bynumber.3 doc/pcre2_substring_list_free.3 doc/pcre2_substring_list_get.3 doc/pcre2_substring_nametable_scan.3 doc/pcre2_substring_number_from_name.3 doc/pcre2api.3 doc/pcre2build.3 doc/pcre2callout.3 doc/pcre2compat.3 doc/pcre2convert.3 doc/pcre2demo.3 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man3' /usr/bin/install -c -m 644 doc/pcre2jit.3 doc/pcre2limits.3 doc/pcre2matching.3 doc/pcre2partial.3 doc/pcre2pattern.3 doc/pcre2perform.3 doc/pcre2posix.3 doc/pcre2sample.3 doc/pcre2serialize.3 doc/pcre2syntax.3 doc/pcre2unicode.3 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man3' libtool: install: /usr/bin/install -c .libs/libpcre2-8.lai /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libpcre2-8.la libtool: install: /usr/bin/install -c .libs/libpcre2-posix.lai /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libpcre2-posix.la libtool: install: /usr/bin/install -c .libs/libpcre2-8.a /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libpcre2-8.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libpcre2-8.a libtool: install: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ranlib /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libpcre2-8.a libtool: install: /usr/bin/install -c .libs/libpcre2-posix.a /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libpcre2-posix.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libpcre2-posix.a libtool: install: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-ranlib /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libpcre2-posix.a libtool: warning: remember to run 'libtool --finish /usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c pcre2grep pcre2test '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' libtool: install: /usr/bin/install -c pcre2grep /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/pcre2grep libtool: install: /usr/bin/install -c pcre2test /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/pcre2test make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/pcre2-10.37' six-1.16.0.tar.gz: OK (md5: a7c927740e4964dd29b72cebfc1429bb) six-1.16.0.tar.gz: OK (sha256: 1e61c37477a1626458e36f7b1d82aa5c9b094fa4802892072e49de9c60c4c926) >>> host-python-six 1.16.0 Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/python-six/six-1.16.0.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/host-python-six-1.16.0 -xf - >>> host-python-six 1.16.0 Patching >>> host-python-six 1.16.0 Configuring >>> host-python-six 1.16.0 Building (cd /home/buildroot/autobuild/instance-1/output-1/build/host-python-six-1.16.0//; PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PYTHONNOUSERSITE=1 PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-1/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-1/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-1/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/autobuild/instance-1/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-1/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-1/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /home/buildroot/autobuild/instance-1/output-1/host/bin/python setup.py build ) running build running build_py creating build creating build/lib copying six.py -> build/lib >>> host-python-six 1.16.0 Installing to host directory (cd /home/buildroot/autobuild/instance-1/output-1/build/host-python-six-1.16.0//; PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PYTHONNOUSERSITE=1 PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-1/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-1/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-1/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/autobuild/instance-1/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-1/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-1/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /home/buildroot/autobuild/instance-1/output-1/host/bin/python setup.py install --prefix=/home/buildroot/autobuild/instance-1/output-1/host --root=/ --single-version-externally-managed ) running install running build running build_py running install_lib copying build/lib/six.py -> /home/buildroot/autobuild/instance-1/output-1/host/lib/python2.7/site-packages byte-compiling /home/buildroot/autobuild/instance-1/output-1/host/lib/python2.7/site-packages/six.py to six.pyc running install_egg_info running egg_info writing six.egg-info/PKG-INFO writing top-level names to six.egg-info/top_level.txt writing dependency_links to six.egg-info/dependency_links.txt reading manifest file 'six.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' no previously-included directories found matching 'documentation/_build' writing manifest file 'six.egg-info/SOURCES.txt' Copying six.egg-info to /home/buildroot/autobuild/instance-1/output-1/host/lib/python2.7/site-packages/six-1.16.0-py2.7.egg-info running install_scripts re2-2021-08-01.tar.gz: OK (sha256: cd8c950b528f413e02c12970dce62a7b6f37733d7f68807e73a2d9bc9db79bc8) >>> re2 2021-08-01 Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/re2/re2-2021-08-01.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01 -xf - >>> re2 2021-08-01 Patching >>> re2 2021-08-01 Configuring (mkdir -p /home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01/ && cd /home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01/ && rm -f CMakeCache.txt && PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /home/buildroot/autobuild/instance-1/output-1/host/bin/cmake /home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01/ -DCMAKE_TOOLCHAIN_FILE="/home/buildroot/autobuild/instance-1/output-1/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=OFF -DRE2_BUILD_TESTING=OFF ) -- The CXX compiler identification is GNU 9.3.0 -- Check for working CXX compiler: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-g++ -- Check for working CXX compiler: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-g++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Looking for C++ include pthread.h -- Looking for C++ include pthread.h - found -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed -- Check if compiler accepts -pthread -- Check if compiler accepts -pthread - yes -- Found Threads: TRUE -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTS -- Build files have been written to: /home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01 >>> re2 2021-08-01 Building PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' Scanning dependencies of target re2 make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' [ 4%] Building CXX object CMakeFiles/re2.dir/re2/bitstate.cc.o [ 8%] Building CXX object CMakeFiles/re2.dir/re2/dfa.cc.o [ 17%] Building CXX object CMakeFiles/re2.dir/re2/filtered_re2.cc.o [ 17%] Building CXX object CMakeFiles/re2.dir/re2/compile.cc.o [ 21%] Building CXX object CMakeFiles/re2.dir/re2/mimics_pcre.cc.o [ 26%] Building CXX object CMakeFiles/re2.dir/re2/nfa.cc.o [ 30%] Building CXX object CMakeFiles/re2.dir/re2/onepass.cc.o [ 34%] Building CXX object CMakeFiles/re2.dir/re2/parse.cc.o [ 39%] Building CXX object CMakeFiles/re2.dir/re2/perl_groups.cc.o [ 43%] Building CXX object CMakeFiles/re2.dir/re2/prefilter.cc.o [ 47%] Building CXX object CMakeFiles/re2.dir/re2/prefilter_tree.cc.o [ 52%] Building CXX object CMakeFiles/re2.dir/re2/prog.cc.o [ 56%] Building CXX object CMakeFiles/re2.dir/re2/re2.cc.o [ 60%] Building CXX object CMakeFiles/re2.dir/re2/regexp.cc.o [ 65%] Building CXX object CMakeFiles/re2.dir/re2/set.cc.o [ 69%] Building CXX object CMakeFiles/re2.dir/re2/simplify.cc.o [ 73%] Building CXX object CMakeFiles/re2.dir/re2/stringpiece.cc.o [ 78%] Building CXX object CMakeFiles/re2.dir/re2/tostring.cc.o [ 82%] Building CXX object CMakeFiles/re2.dir/re2/unicode_casefold.cc.o [ 86%] Building CXX object CMakeFiles/re2.dir/re2/unicode_groups.cc.o [ 91%] Building CXX object CMakeFiles/re2.dir/util/rune.cc.o [ 95%] Building CXX object CMakeFiles/re2.dir/util/strutil.cc.o [100%] Linking CXX static library libre2.a make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' [100%] Built target re2 make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' >>> re2 2021-08-01 Installing to staging directory PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot install/fast -C /home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' Install the project... -- Install configuration: "Release" -- Installing: /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/re2/filtered_re2.h -- Installing: /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/re2/re2.h -- Installing: /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/re2/set.h -- Installing: /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/re2/stringpiece.h -- Installing: /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libre2.a -- Installing: /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/cmake/re2/re2Config.cmake -- Installing: /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/cmake/re2/re2Config-release.cmake make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' >>> re2 2021-08-01 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> re2 2021-08-01 Installing to target PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-1/output-1/target install/fast -C /home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' Install the project... -- Install configuration: "Release" -- Installing: /home/buildroot/autobuild/instance-1/output-1/target/usr/include/re2/filtered_re2.h -- Installing: /home/buildroot/autobuild/instance-1/output-1/target/usr/include/re2/re2.h -- Installing: /home/buildroot/autobuild/instance-1/output-1/target/usr/include/re2/set.h -- Installing: /home/buildroot/autobuild/instance-1/output-1/target/usr/include/re2/stringpiece.h -- Installing: /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libre2.a -- Installing: /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/cmake/re2/re2Config.cmake -- Installing: /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/cmake/re2/re2Config-release.cmake make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/re2-2021-08-01' rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7-br1.tar.gz: OK (sha256: 8614e140b04da3dbb787760bdb0fe2ac5fe8907f5d3e9a74c6713e3d17fc3650) >>> rtc-tools 33ef4aa1c92b0c92a351284d93d1ac5570de9cc7 Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/rtc-tools/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7-br1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7 -xf - >>> rtc-tools 33ef4aa1c92b0c92a351284d93d1ac5570de9cc7 Patching >>> rtc-tools 33ef4aa1c92b0c92a351284d93d1ac5570de9cc7 Configuring >>> rtc-tools 33ef4aa1c92b0c92a351284d93d1ac5570de9cc7 Building /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-elf2flt=-r -static -o /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc.c /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-elf2flt=-r -static -o /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc-range /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc-range.c /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-elf2flt=-r -static -o /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc-sync /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc-sync.c >>> rtc-tools 33ef4aa1c92b0c92a351284d93d1ac5570de9cc7 Installing to target /usr/bin/install -D -m 0755 /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/rtc /usr/bin/install -D -m 0755 /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc-range /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/rtc-range /usr/bin/install -D -m 0755 /home/buildroot/autobuild/instance-1/output-1/build/rtc-tools-33ef4aa1c92b0c92a351284d93d1ac5570de9cc7/rtc-sync /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/rtc-sync tinydtls-0.9-rc1.tar.gz: OK (sha256: af73742835b5a66dc0b4a9c126ca8243b5db2986b4969d76e2b4531aa7e13f67) >>> tinydtls 0.9-rc1 Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/tinydtls/tinydtls-0.9-rc1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/tinydtls-0.9-rc1 -xf - >>> tinydtls 0.9-rc1 Patching Applying 0001-sha2-sha2.c-fix-build-on-big-endian.patch using patch: patching file sha2/sha2.c >>> tinydtls 0.9-rc1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-1/output-1/build/tinydtls-0.9-rc1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> tinydtls 0.9-rc1 Configuring >>> tinydtls 0.9-rc1 Autoreconfiguring configure.ac: error: required file 'ar-lib' not found package/pkg-generic.mk:273: recipe for target '/home/buildroot/autobuild/instance-1/output-1/build/tinydtls-0.9-rc1/.stamp_configured' failed make: *** [/home/buildroot/autobuild/instance-1/output-1/build/tinydtls-0.9-rc1/.stamp_configured] Error 1 make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot'