CXX spstproc.lo CXX ton_stab.lo CXX vad1.lo CXX add.lo CXX az_lsp.lo CXX bitno_tab.lo CXX bitreorder_tab.lo CXX c2_9pf_tab.lo CXX div_s.lo CXX extract_h.lo CXX extract_l.lo CXX gains_tbl.lo CXX gc_pred.lo CXX get_const_tbls.lo CXX gmed_n.lo CXX gray_tbl.lo CXX grid_tbl.lo CXX int_lpc.lo CXX inv_sqrt.lo CXX inv_sqrt_tbl.lo CXX l_deposit_h.lo CXX l_deposit_l.lo CXX log2.lo CXX log2_norm.lo CXX log2_tbl.lo CXX lsfwt.lo CXX l_shr_r.lo CXX lsp_az.lo CXX lsp.lo CXX lsp_lsf.lo CXX lsp_lsf_tbl.lo CXX lsp_tab.lo CXX mult_r.lo CXX negate.lo CXX norm_l.lo CXX norm_s.lo CXX overflow_tbl.lo CXX ph_disp_tab.lo CXX pow2.lo CXX pow2_tbl.lo CXX pred_lt.lo CXX q_plsf_3.lo CXX q_plsf_3_tbl.lo CXX q_plsf_5.lo CXX q_plsf_5_tbl.lo CXX q_plsf.lo CXX qua_gain_tbl.lo CXX reorder.lo CXX residu.lo CXX round.lo CXX set_zero.lo CXX shr.lo CXX shr_r.lo CXX sqrt_l.lo CXX sqrt_l_tbl.lo CXX sub.lo CXX syn_filt.lo CXX weight_a.lo CXX window_tab.lo GEN libopencore-amrnb.la make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' Making all in amrwb make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' CXX wrapper.lo CXX dec_acelp_2p_in_64.lo CXX band_pass_6k_7k.lo CXX agc2_amr_wb.lo CXX dec_acelp_4p_in_64.lo CXX dec_alg_codebook.lo CXX dec_gain2_amr_wb.lo CXX deemphasis_32.lo CXX dtx_decoder_amr_wb.lo CXX get_amr_wb_bits.lo CXX highpass_400hz_at_12k8.lo CXX highpass_50hz_at_12k8.lo CXX homing_amr_wb_dec.lo CXX interpolate_isp.lo CXX isf_extrapolation.lo CXX isp_az.lo CXX isp_isf.lo CXX lagconceal.lo CXX low_pass_filt_7k.lo CXX median5.lo CXX mime_io.lo CXX noise_gen_amrwb.lo CXX normalize_amr_wb.lo CXX oversamp_12k8_to_16k.lo CXX phase_dispersion.lo CXX pit_shrp.lo CXX pred_lt4.lo CXX preemph_amrwb_dec.lo CXX pvamrwbdecoder.lo CXX pvamrwb_math_op.lo CXX q_gain2_tab.lo CXX qisf_ns.lo CXX qisf_ns_tab.lo CXX qpisf_2s.lo CXX scale_signal.lo CXX qpisf_2s_tab.lo CXX synthesis_amr_wb.lo CXX voice_factor.lo CXX wb_syn_filt.lo CXX weight_amrwb_lpc.lo GEN libopencore-amrwb.la make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' >>> opencore-amr 0.1.5 Installing to staging directory PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot install -C /home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/ make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' Making install in amrnb make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include/opencore-amrnb' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /bin/bash ../libtool --mode=install /usr/bin/install -c libopencore-amrnb.la '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib' /usr/bin/install -c -m 644 opencore-amrnb.pc '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 interf_dec.h interf_enc.h '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include/opencore-amrnb' libtool: install: /usr/bin/install -c .libs/libopencore-amrnb.so.0.0.3 /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrnb.so.0.0.3 libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libopencore-amrnb.so.0.0.3 libopencore-amrnb.so.0 || { rm -f libopencore-amrnb.so.0 && ln -s libopencore-amrnb.so.0.0.3 libopencore-amrnb.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libopencore-amrnb.so.0.0.3 libopencore-amrnb.so || { rm -f libopencore-amrnb.so && ln -s libopencore-amrnb.so.0.0.3 libopencore-amrnb.so; }; }) libtool: install: /usr/bin/install -c .libs/libopencore-amrnb.lai /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrnb.la libtool: install: /usr/bin/install -c .libs/libopencore-amrnb.a /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrnb.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrnb.a libtool: install: /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-ranlib /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrnb.a libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' Making install in amrwb make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include/opencore-amrwb' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /bin/bash ../libtool --mode=install /usr/bin/install -c libopencore-amrwb.la '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib' /usr/bin/install -c -m 644 dec_if.h if_rom.h '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include/opencore-amrwb' /usr/bin/install -c -m 644 opencore-amrwb.pc '/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c .libs/libopencore-amrwb.so.0.0.3 /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrwb.so.0.0.3 libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libopencore-amrwb.so.0.0.3 libopencore-amrwb.so.0 || { rm -f libopencore-amrwb.so.0 && ln -s libopencore-amrwb.so.0.0.3 libopencore-amrwb.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libopencore-amrwb.so.0.0.3 libopencore-amrwb.so || { rm -f libopencore-amrwb.so && ln -s libopencore-amrwb.so.0.0.3 libopencore-amrwb.so; }; }) libtool: install: /usr/bin/install -c .libs/libopencore-amrwb.lai /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrwb.la libtool: install: /usr/bin/install -c .libs/libopencore-amrwb.a /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrwb.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrwb.a libtool: install: /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-ranlib /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libopencore-amrwb.a libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' >>> opencore-amr 0.1.5 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> opencore-amr 0.1.5 Installing to target PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/target install -C /home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/ make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' Making install in amrnb make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/include/opencore-amrnb' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig' /bin/bash ../libtool --mode=install /usr/bin/install -c libopencore-amrnb.la '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib' /usr/bin/install -c -m 644 opencore-amrnb.pc '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 interf_dec.h interf_enc.h '/home/buildroot/autobuild/instance-0/output-1/target/usr/include/opencore-amrnb' libtool: install: /usr/bin/install -c .libs/libopencore-amrnb.so.0.0.3 /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrnb.so.0.0.3 libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libopencore-amrnb.so.0.0.3 libopencore-amrnb.so.0 || { rm -f libopencore-amrnb.so.0 && ln -s libopencore-amrnb.so.0.0.3 libopencore-amrnb.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libopencore-amrnb.so.0.0.3 libopencore-amrnb.so || { rm -f libopencore-amrnb.so && ln -s libopencore-amrnb.so.0.0.3 libopencore-amrnb.so; }; }) libtool: install: /usr/bin/install -c .libs/libopencore-amrnb.lai /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrnb.la libtool: install: /usr/bin/install -c .libs/libopencore-amrnb.a /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrnb.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrnb.a libtool: install: /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-ranlib /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrnb.a libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrnb' Making install in amrwb make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/include/opencore-amrwb' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig' /bin/bash ../libtool --mode=install /usr/bin/install -c libopencore-amrwb.la '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib' /usr/bin/install -c -m 644 dec_if.h if_rom.h '/home/buildroot/autobuild/instance-0/output-1/target/usr/include/opencore-amrwb' /usr/bin/install -c -m 644 opencore-amrwb.pc '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c .libs/libopencore-amrwb.so.0.0.3 /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrwb.so.0.0.3 libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libopencore-amrwb.so.0.0.3 libopencore-amrwb.so.0 || { rm -f libopencore-amrwb.so.0 && ln -s libopencore-amrwb.so.0.0.3 libopencore-amrwb.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libopencore-amrwb.so.0.0.3 libopencore-amrwb.so || { rm -f libopencore-amrwb.so && ln -s libopencore-amrwb.so.0.0.3 libopencore-amrwb.so; }; }) libtool: install: /usr/bin/install -c .libs/libopencore-amrwb.lai /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrwb.la libtool: install: /usr/bin/install -c .libs/libopencore-amrwb.a /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrwb.a libtool: install: chmod 644 /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrwb.a libtool: install: /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-ranlib /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libopencore-amrwb.a libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5/amrwb' make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/opencore-amr-0.1.5' openpgm-5-3-128.tar.gz: OK (sha256: 8d707ef8dda45f4a7bc91016d7f2fed6a418637185d76c7ab30b306499c6d393) >>> openpgm 5-3-128 Extracting gzip -d -c /home/buildroot/autobuild/instance-0/dl/openpgm/openpgm-5-3-128.tar.gz | /home/buildroot/autobuild/instance-0/output-1/host/bin/tar --strip-components=1 -C /home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128 -xf - >>> openpgm 5-3-128 Patching Applying 0001-Rename-openpgm-5.2.pc.in.patch using patch: patching file openpgm/pgm/openpgm-5.2.pc.in patching file openpgm/pgm/openpgm-5.3.pc.in Applying 0002-openpgm-pgm-checksum.c-fix-build-with-32-bits-MMX.patch using patch: patching file openpgm/pgm/checksum.c >>> openpgm 5-3-128 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128 -name $file); do cp support/gnuconfig/$file $i; done; done >>> openpgm 5-3-128 Configuring >>> openpgm 5-3-128 Autoreconfiguring aclocal: warning: couldn't open directory 'm4': No such file or directory libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:12: warning: The macro `AC_CONFIG_HEADER' is obsolete. configure.ac:12: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.ac:12: the top level configure.ac:29: warning: The macro `AC_PROG_CC_C99' is obsolete. configure.ac:29: You should run autoupdate. ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... configure.ac:29: the top level configure.ac:31: warning: The macro `AC_PROG_LIBTOOL' is obsolete. configure.ac:31: You should run autoupdate. m4/libtool.m4:99: AC_PROG_LIBTOOL is expanded from... configure.ac:31: the top level configure.ac:28: installing './compile' configure.ac:31: installing './config.guess' configure.ac:31: installing './config.sub' configure.ac:17: installing './install-sh' configure.ac:17: installing './missing' Makefile.am: installing './depcomp' >>> openpgm 5-3-128 Patching libtool patching file /home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128/openpgm/pgm/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). (cd /home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128/openpgm/pgm && rm -rf config.cache && PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-ar" AS="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-as" LD="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-ld" NM="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-nm" CC="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc" GCC="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc" CPP="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-cpp" CXX="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-g++" FC="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gfortran" F77="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gfortran" RANLIB="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-ranlib" READELF="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-readelf" STRIP="/bin/true" OBJCOPY="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O0 -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O0 -g0 " LDFLAGS="" FCFLAGS=" -O0 -g0" FFLAGS=" -O0 -g0" PKG_CONFIG="/home/buildroot/autobuild/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes ac_cv_file__proc_cpuinfo=yes ac_cv_file__dev_rtc=no ac_cv_file__dev_hpet=no CONFIG_SITE=/dev/null ./configure --target=m68k-buildroot-linux-uclibc --host=m68k-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for m68k-buildroot-linux-uclibc-strip... /bin/true checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for m68k-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc accepts -g... yes checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc option to enable C11 features... none needed checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc... none checking dependency style of /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc... none checking build system type... x86_64-pc-linux-gnu checking host system type... m68k-buildroot-linux-uclibc checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc... /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-ld checking if the linker (/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-nm checking the name lister (/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to m68k-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-ld option to reload object files... -r checking for m68k-buildroot-linux-uclibc-objdump... /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-objdump checking how to recognize dependent libraries... pass_all checking for m68k-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for m68k-buildroot-linux-uclibc-ar... /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-ar checking for archiver @FILE support... @ checking for m68k-buildroot-linux-uclibc-strip... (cached) /bin/true checking for m68k-buildroot-linux-uclibc-ranlib... /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-ranlib checking command to parse /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc-nm output from /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for m68k-buildroot-linux-uclibc-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for sys/param.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc static flag -static works... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc linker (/home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for perl... /usr/bin/perl checking for python... /home/buildroot/autobuild/instance-0/output-1/host/bin/python checking for library containing sqrt... none required checking for library containing pthread_mutex_trylock... none required checking for library containing clock_gettime... none required checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for arpa/inet.h... yes checking for fcntl.h... yes checking for float.h... yes checking for inttypes.h... (cached) yes checking for libintl.h... yes checking for limits.h... yes checking for locale.h... yes checking for malloc.h... yes checking for memory.h... yes checking for netdb.h... yes checking for netinet/in.h... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for sys/ioctl.h... yes checking for sys/param.h... (cached) yes checking for sys/socket.h... yes checking for sys/time.h... yes checking for sys/timeb.h... yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking for wchar.h... yes checking for _Bool... yes checking for stdbool.h that conforms to C99... yes checking for inline... inline checking for flexible array members... yes checking for C/C++ restrict keyword... __restrict__ checking how to run the C preprocessor... /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-cpp checking for variable-length arrays... yes checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for int8_t... yes checking for mode_t... yes checking for size_t... (cached) yes checking for ssize_t... yes checking for uid_t in sys/types.h... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking for getpagesize... yes checking for working mmap... (cached) yes checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/m68k-linux-gcc options needed to detect all undeclared functions... none needed checking whether strerror_r is declared... yes checking whether strerror_r returns char *... no checking for atexit... yes checking for clock_gettime... yes checking for floor... yes checking for ftime... yes checking for gethostbyaddr... yes checking for gethostbyname... yes checking for gethostname... yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for memmove... yes checking for memset... yes checking for regcomp... yes checking for select... yes checking for setenv... yes checking for setlocale... yes checking for socket... yes checking for sqrt... yes checking for stpcpy... yes checking for strcasecmp... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strpbrk... yes checking for strrchr... yes checking for strstr... yes checking for strtol... yes checking for strtoul... yes checking for strtoull... yes checking for pthread_spinlock... yes checking for sa_len member in struct sockaddr... no checking for __ss_family member in struct sockaddr_storage... no checking for getprotobyname_r... yes checking whether getprotobyname_r returns struct protoent *... no checking whether getprotobyname_r takes 3 parameters... no checking for getnetent... yes checking for C99 variadic macros... yes checking for GNU-style variadic macros... yes checking for working alloca.h... (cached) yes checking for alloca... (cached) checking for eventfd... yes checking for /proc/cpuinfo... (cached) yes checking for backtrace... no checking for pselect... yes checking for /dev/rtc... (cached) no checking for RDTSC instruction... no checking for /dev/hpet... (cached) no checking for poll... yes checking for epoll_ctl... yes checking for getifaddrs... yes checking for struct ifreq.ifr_netmask... no checking for struct _WSAMSG.name... no checking for struct group_req.gr_interface... yes checking for struct ip_mreqn.imr_ifindex... yes checking for struct ip_msfilter.imsf_multiaddr... no checking for printf thousands' grouping... yes checking for vasprintf... yes checking for hidden visibility attribute... yes checking for raw IP sockets ip_{len,off} host byte ordering... no checking if unaligned access fails... (cached) no checking for intrinsic atomic ops... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating openpgm-5.3.pc config.status: creating openpgm.spec config.status: creating include/config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls >>> openpgm 5-3-128 Building PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128/openpgm/pgm make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128/openpgm/pgm' CC libpgm_noinst_la-cpu.lo CC libpgm_noinst_la-thread.lo CC libpgm_noinst_la-mem.lo CC libpgm_noinst_la-string.lo cpu.c: In function '__cpuidex': cpu.c:40:3: error: impossible constraint in 'asm' 40 | __asm__ volatile ( | ^~~~~~~ Makefile:716: recipe for target 'libpgm_noinst_la-cpu.lo' failed make[1]: *** [libpgm_noinst_la-cpu.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128/openpgm/pgm' package/pkg-generic.mk:290: recipe for target '/home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128/.stamp_built' failed make: *** [/home/buildroot/autobuild/instance-0/output-1/build/openpgm-5-3-128/.stamp_built] Error 2 make: Leaving directory '/home/buildroot/autobuild/instance-0/buildroot'