libtool: install: /usr/bin/install -c sg_map26 /home/peko/autobuild/instance-0/output/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/peko/autobuild/instance-0/output/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/peko/autobuild/instance-0/output/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/peko/autobuild/instance-0/output/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/peko/autobuild/instance-0/output/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/peko/autobuild/instance-0/output/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/peko/autobuild/instance-0/output/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/peko/autobuild/instance-0/output/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/peko/autobuild/instance-0/output/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/peko/autobuild/instance-0/output/target/usr/bin/sgp_dd Making install in doc make[4]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' Making install in scripts make[4]: Nothing to be done for `install-data-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature '/home/peko/autobuild/instance-0/output/target/usr/bin' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/peko/autobuild/instance-0/output/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/peko/autobuild/instance-0/output/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /home/peko/autobuild/instance-0/output/target/usr/bin/${prog}; done smartmontools-6.5.tar.gz: OK (md5: 093aeec3f8f39fa9a37593c4012d3156) smartmontools-6.5.tar.gz: OK (sha1: 7e788b429534a4ae627858fbcc826b93402cee7e) >>> smartmontools 6.5 Extracting gzip -d -c /home/peko/autobuild/instance-0/dl/smartmontools/smartmontools-6.5.tar.gz | /home/peko/autobuild/instance-0/output/host/bin/tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/smartmontools-6.5 -xf - >>> smartmontools 6.5 Patching >>> smartmontools 6.5 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-0/output/build/smartmontools-6.5 -name $file); do cp support/gnuconfig/$file $i; done; done >>> smartmontools 6.5 Patching libtool >>> smartmontools 6.5 Configuring (cd /home/peko/autobuild/instance-0/output/build/smartmontools-6.5/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ar" AS="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" LD="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" NM="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-nm" CC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" GCC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" CPP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-cpp" CXX="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++" FC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" F77="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" RANLIB="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ranlib" READELF="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-readelf" STRIP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip" OBJCOPY="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objcopy" OBJDUMP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-0/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" DEFAULT_LINKER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-0/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-uclibcgnueabi --host=arm-buildroot-linux-uclibcgnueabi --build=powerpc64le-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-linux-uclibcgnueabi-strip... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++... none checking for arm-buildroot-linux-uclibcgnueabi-gcc... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc checking whether we are using the GNU C compiler... yes checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc accepts -g... yes checking for /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc option to accept ISO C89... none needed checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc understands -c and -o together... yes checking dependency style of /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc... none checking dependency style of /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc... none checking build system type... powerpc64le-unknown-linux-gnu checking host system type... arm-buildroot-linux-uclibcgnueabi checking whether this is a build from SVN... no checking how to run the C++ preprocessor... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking dev/ata/atavar.h usability... no checking dev/ata/atavar.h presence... no checking for dev/ata/atavar.h... no checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking sys/inttypes.h usability... no checking sys/inttypes.h presence... no checking for sys/inttypes.h... no checking sys/int_types.h usability... no checking sys/int_types.h presence... no checking for sys/int_types.h... no checking sys/tweio.h usability... no checking sys/tweio.h presence... no checking for sys/tweio.h... no checking sys/twereg.h usability... no checking sys/twereg.h presence... no checking for sys/twereg.h... no checking sys/tw_osl_ioctl.h usability... no checking sys/tw_osl_ioctl.h presence... no checking for sys/tw_osl_ioctl.h... no checking linux/compiler.h usability... no checking linux/compiler.h presence... no checking for linux/compiler.h... no checking dev/ciss/cissio.h usability... no checking dev/ciss/cissio.h presence... no checking for dev/ciss/cissio.h... no checking for linux/cciss_ioctl.h... yes checking for ntdddisk.h... no checking for ddk/ntdddisk.h... no checking wbemcli.h usability... no checking wbemcli.h presence... no checking for wbemcli.h... no checking for int64_t... yes checking for uint64_t... yes checking for getopt_long... yes checking for regcomp... yes checking for sigset... yes checking for strtoull... yes checking for uname... yes checking for clock_gettime... yes checking for ftime... yes checking for gettimeofday... yes checking whether byte ordering is bigendian... (cached) no checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ supports __attribute__((packed))... yes checking for systemdsystemunitdir... no checking for capng_clear in -lcap-ng... no checking whether to use libcap-ng... no checking whether os_linux.cpp uses new interface... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared checking whether make sets $(MAKE)... (cached) yes configure: ----------------------------------------------------------------------------- smartmontools-6.5 configuration: host operating system: arm-buildroot-linux-uclibcgnueabi C++ compiler: /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ C compiler: /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc preprocessor flags: -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 C++ compiler flags: -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W C compiler flags: -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os linker flags: OS specific modules: os_linux.o cciss.o dev_areca.o binary install path: /usr/sbin man page install path: /usr/share/man doc file install path: /usr/share/doc/smartmontools examples install path: /usr/share/doc/smartmontools/examplescripts drive database file: /usr/share/smartmontools/drivedb.h database update script: /usr/sbin/update-smart-drivedb download tools: curl wget lynx svn local drive database: /etc/smart_drivedb.h smartd config file: /etc/smartd.conf smartd warning script: /etc/smartd_warning.sh smartd plugin path: /etc/smartd_warning.d smartd initd script: [disabled] smartd save files: [disabled] smartd attribute logs: [disabled] libcap-ng support: no SELinux support: no NVMe DEVICESCAN: no ----------------------------------------------------------------------------- configure: WARNING: This version of smartmontools provides NVMe support which is still EXPERIMENTAL. NVMe devices are not yet included in smartd.conf 'DEVICESCAN' and 'smartctl --scan' unless '-d nvme' is specified. Use option '--with-nvme-devicescan' to include NVMe devices. Use option '--without-nvme-devicescan' to suppress this warning. >>> smartmontools 6.5 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j6 -C /home/peko/autobuild/instance-0/output/build/smartmontools-6.5/ /usr/bin/make all-am /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o smartctl.o smartctl.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o atacmdnames.o atacmdnames.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o atacmds.o atacmds.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o ataidentify.o ataidentify.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o ataprint.o ataprint.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o dev_ata_cmd_set.o dev_ata_cmd_set.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o dev_interface.o dev_interface.cpp ataidentify.cpp: In function 'void ata_print_identify_data(const void*, bool, int)': ataidentify.cpp:629:46: warning: left shift of negative value [-Wshift-negative-value] b = (w >> bit2) & ~(~0 << (bit-bit2+1)); ^ /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o knowndrives.o knowndrives.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o nvmecmds.o nvmecmds.cpp atacmds.cpp:2781:1: warning: '{anonymous}::parsed_ata_device::~parsed_ata_device()' defined but not used [-Wunused-function] parsed_ata_device::~parsed_ata_device() throw() ^~~~~~~~~~~~~~~~~ atacmds.cpp:2771:1: warning: '{anonymous}::parsed_ata_device::parsed_ata_device(smart_interface*, const char*)' defined but not used [-Wunused-function] parsed_ata_device::parsed_ata_device(smart_interface * intf, const char * dev_name) ^~~~~~~~~~~~~~~~~ /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o nvmeprint.o nvmeprint.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o scsicmds.o scsicmds.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o scsiata.o scsiata.cpp scsicmds.cpp: In function 'int scsiSetExceptionControlAndWarning(scsi_device*, int, const scsi_iec_mode_page*)': scsicmds.cpp:1453:13: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (iecp->gotChangeable && ^~ scsicmds.cpp:1456:17: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' rout[offset + 2] &= TEST_DISABLE;/* clear TEST bit for spec */ ^~~~ /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o scsiprint.o scsiprint.cpp scsiata.cpp: In member function 'virtual bool sat::sat_device::ata_pass_through(const ata_cmd_in&, ata_cmd_out&)': scsiata.cpp:250:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (!ata_cmd_is_supported(in, ^~ scsiata.cpp:259:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' struct scsi_cmnd_io io_hdr; ^~~~~~ cat ChangeLog NEWS $(SOURCES) | $(VERSION_FROM_SVN_IDS) > svnversion.h scsiprint.cpp: In function 'int scsiPrintMain(scsi_device*, const scsi_print_options&)': scsiprint.cpp:1943:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (scsiSmartEnable(device)) ^~ scsiprint.cpp:1945:13: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' any_output = true; ^~~~~~~~~~ scsiprint.cpp:1949:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (scsiSmartDisable(device)) ^~ scsiprint.cpp:1951:13: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' any_output = true; ^~~~~~~~~~ /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o os_linux.o os_linux.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o cciss.o cciss.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o dev_areca.o dev_areca.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o smartd.o smartd.cpp os_linux.cpp: In member function 'virtual bool os_linux::linux_aacraid_device::scsi_pass_through(scsi_cmnd_io*)': os_linux.cpp:973:5: warning: this 'for' clause does not guard... [-Wmisleading-indentation] for (k = 0; k < (int)iop->cmnd_len; ++k) ^~~ os_linux.cpp:975:7: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'for' if ((report > 1) && ^~ /bin/sh ./config.status --file=update-smart-drivedb config.status: creating update-smart-drivedb chmod +x update-smart-drivedb /bin/sh ./config.status --file=smartd_warning.sh config.status: creating smartd_warning.sh chmod +x smartd_warning.sh $(MAN_FILTER) < ./smartd.conf.5.in > smartd.conf.5 $(MAN_FILTER) < ./smartctl.8.in > smartctl.8 $(MAN_FILTER) < ./smartd.8.in > smartd.8 $(MAN_FILTER) < ./update-smart-drivedb.8.in > update-smart-drivedb.8 /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/share/smartmontools"' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -c -o utility.o utility.cpp /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -o smartctl smartctl.o atacmdnames.o atacmds.o ataidentify.o ataprint.o dev_ata_cmd_set.o dev_interface.o knowndrives.o nvmecmds.o nvmeprint.o scsicmds.o scsiata.o scsiprint.o utility.o os_linux.o cciss.o dev_areca.o /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -W -o smartd smartd.o atacmdnames.o atacmds.o dev_ata_cmd_set.o dev_interface.o knowndrives.o nvmecmds.o scsicmds.o scsiata.o utility.o os_linux.o cciss.o dev_areca.o >>> smartmontools 6.5 Installing to target PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j6 DESTDIR=/home/peko/autobuild/instance-0/output/target install -C /home/peko/autobuild/instance-0/output/build/smartmontools-6.5/ /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/etc' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/sbin' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/sbin' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/etc/smartd_warning.d' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/doc/smartmontools' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/smartmontools' /usr/bin/install -c smartctl smartd '/home/peko/autobuild/instance-0/output/target/usr/sbin' /usr/bin/install -c update-smart-drivedb '/home/peko/autobuild/instance-0/output/target/usr/sbin' /usr/bin/install -c -m 644 './smartd.conf' '/home/peko/autobuild/instance-0/output/target/etc/smartd.conf' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/doc/smartmontools/examplescripts' /usr/bin/install -c -m 644 drivedb.h '/home/peko/autobuild/instance-0/output/target/usr/share/smartmontools' /usr/bin/install -c -m 644 AUTHORS ChangeLog ChangeLog-5.0-6.0 COPYING INSTALL NEWS README TODO smartd.conf '/home/peko/autobuild/instance-0/output/target/usr/share/doc/smartmontools' /usr/bin/install -c -m 644 examplescripts/README '/home/peko/autobuild/instance-0/output/target/usr/share/doc/smartmontools/examplescripts' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/doc/smartmontools/examplescripts' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man5' /usr/bin/install -c examplescripts/Example1 examplescripts/Example2 examplescripts/Example3 examplescripts/Example4 examplescripts/Example5 examplescripts/Example6 '/home/peko/autobuild/instance-0/output/target/usr/share/doc/smartmontools/examplescripts' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/etc' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 smartd.conf.5 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man5' /usr/bin/install -c smartd_warning.sh '/home/peko/autobuild/instance-0/output/target/etc' /usr/bin/install -c -m 644 smartctl.8 smartd.8 update-smart-drivedb.8 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' smcroute-2.3.1.tar.xz: OK (sha256: cd6c5cc2edfa1348acb07ed026180ebfc8dd0f87153f5382cb27cb5557724c56) smcroute-2.3.1.tar.xz: OK (md5: d8080828b7730bffb86969afd2bf94cb) >>> smcroute 2.3.1 Extracting xzcat /home/peko/autobuild/instance-0/dl/smcroute/smcroute-2.3.1.tar.xz | /home/peko/autobuild/instance-0/output/host/bin/tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/smcroute-2.3.1 -xf - >>> smcroute 2.3.1 Patching >>> smcroute 2.3.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-0/output/build/smcroute-2.3.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> smcroute 2.3.1 Patching libtool >>> smcroute 2.3.1 Configuring (cd /home/peko/autobuild/instance-0/output/build/smcroute-2.3.1/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ar" AS="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" LD="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" NM="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-nm" CC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" GCC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" CPP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-cpp" CXX="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++" FC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" F77="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" RANLIB="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ranlib" READELF="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-readelf" STRIP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip" OBJCOPY="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objcopy" OBJDUMP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-0/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" DEFAULT_LINKER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-0/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-uclibcgnueabi --host=arm-buildroot-linux-uclibcgnueabi --build=powerpc64le-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ac_cv_func_setpgrp_void=yes --with-libcap ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-nls, --disable-static, --enable-shared checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-linux-uclibcgnueabi-strip... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for arm-buildroot-linux-uclibcgnueabi-gcc... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc accepts -g... yes checking for /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc option to accept ISO C89... none needed checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc... none checking how to run the C preprocessor... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-cpp checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for uint32_t... yes checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... cross configure: WARNING: result yes guessed because of cross compilation checking for working vfork... (cached) yes checking for atexit... yes checking for dup2... yes checking for memset... yes checking for select... yes checking for socket... yes checking for strchr... yes checking for strerror... yes checking for strrchr... yes checking for asprintf... yes checking for strlcpy... yes checking for utimensat... yes checking for sun_len member in struct sockaddr_un... no checking for ANSI C header files... (cached) yes checking for arpa/inet.h... yes checking for fcntl.h... yes checking for netinet/in.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for sys/ioctl.h... yes checking for sys/prctl.h... yes checking for sys/socket.h... yes checking for sys/types.h... (cached) yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking for net/route.h... yes checking for sys/param.h... yes checking for sys/stat.h... (cached) yes checking for sys/time.h... yes checking for sys/capability.h... yes checking for ifaddrs.h... yes checking for linux/sockios.h... yes checking for termios.h... yes checking pkg-config is at least version 0.9.0... yes checking for library containing clock_gettime... none required checking for library containing timer_create... none required checking for library containing timer_settime... none required checking for library containing cap_set_flag... -lcap checking for linux/mroute.h... yes checking for linux/filter.h... yes checking for netinet/ip_mroute.h... no checking for linux/mroute6.h... yes checking for netinet6/ip6_mroute.h... no checking for IPv6 multicast host support... yes checking for IPv6 multicast routing support... yes checking for vifc_rate_limit member in struct mif6ctl... yes checking for vifc_threshold member in struct mif6ctl... yes checking for SOCK_CLOEXEC support... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating smcroute.service config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-nls, --disable-static, --enable-shared ------------------ Summary ------------------ SMCRoute version 2.3.1 Prefix.........: /usr Sysconfdir.....: /etc Localstatedir..: /var C Compiler.....: /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 Optional features: IPv6...........: yes Client IPC.....: yes Config file....: yes MRDISC RFC4286.: no libcap.........: yes systemd........: no ------------- Compiler version -------------- arm-buildroot-linux-uclibcgnueabi-gcc.br_real (Buildroot 2018.05-git-00891-g046c5e2) 6.4.0 Copyright (C) 2017 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. --------------------------------------------- Check the above options and compile with: make >>> smcroute 2.3.1 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ar" AS="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" LD="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" NM="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-nm" CC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" GCC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" CPP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-cpp" CXX="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++" FC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" F77="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" RANLIB="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ranlib" READELF="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-readelf" STRIP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip" OBJCOPY="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objcopy" OBJDUMP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-0/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" DEFAULT_LINKER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-0/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j6 -C /home/peko/autobuild/instance-0/output/build/smcroute-2.3.1/ /usr/bin/make all-recursive Making all in src CC smcrouted-mroute.o CC smcrouted-smcrouted.o CC smcrouted-ifvc.o CC smcrouted-mcgroup.o CC smcrouted-script.o CC smcrouted-log.o ifvc.c: In function 'iface_iterator': ifvc.c:187:8: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (i >= num_ifaces) ^~ mroute.c: In function 'mroute6_enable': mroute.c:824:15: warning: unused variable 'i' [-Wunused-variable] unsigned int i; ^ CC smcrouted-pidfile.o CC smcrouted-socket.o CC smcrouted-timer.o CC smcrouted-cap.o CC smcrouted-msg.o CC smcrouted-ipc.o CC smcrouted-conf.o CC smcroutectl-smcroutectl.o conf.c: In function 'conf_parse': conf.c:278:7: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] conf = file; ^ CCLD smcroutectl CCLD smcrouted make[4]: Nothing to be done for `all-am'. >>> smcroute 2.3.1 Installing to target PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ar" AS="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" LD="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" NM="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-nm" CC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" GCC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" CPP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-cpp" CXX="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++" FC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" F77="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" RANLIB="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ranlib" READELF="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-readelf" STRIP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip" OBJCOPY="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objcopy" OBJDUMP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-0/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" DEFAULT_LINKER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-0/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j6 DESTDIR=/home/peko/autobuild/instance-0/output/target install -C /home/peko/autobuild/instance-0/output/build/smcroute-2.3.1/ Making install in src make[4]: Nothing to be done for `install-data-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/sbin' /usr/bin/install -c smcrouted smcroutectl '/home/peko/autobuild/instance-0/output/target/usr/sbin' make[4]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/doc/smcroute' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 smcroute.8 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 README.md COPYING smcroute.conf '/home/peko/autobuild/instance-0/output/target/usr/share/doc/smcroute' Borealis_sound_theme_ogg-0.9a.tar.bz2: OK (sha256: dd80a9c6317de29d42786ba7d95b114b64d06ec6c0c17dd18df853a5c668e727) >>> sound-theme-borealis 0.9a Extracting bzcat /home/peko/autobuild/instance-0/dl/sound-theme-borealis/Borealis_sound_theme_ogg-0.9a.tar.bz2 | /home/peko/autobuild/instance-0/output/host/bin/tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/sound-theme-borealis-0.9a -xf - >>> sound-theme-borealis 0.9a Patching >>> sound-theme-borealis 0.9a Configuring >>> sound-theme-borealis 0.9a Building >>> sound-theme-borealis 0.9a Installing to target for f in /home/peko/autobuild/instance-0/output/build/sound-theme-borealis-0.9a/*.ogg ; do /usr/bin/install -D -m 0644 $f /home/peko/autobuild/instance-0/output/target/usr/share/sounds/borealis/stereo/`basename $f` || exit 1; done sp-oops-extract_0.0.7-1.tar.gz: OK (sha256: 85601a569af1f4584db75fad21d3a70e377ce12d1bccad7dbe1112abd3b43d93) >>> sp-oops-extract 0.0.7-1 Extracting gzip -d -c /home/peko/autobuild/instance-0/dl/sp-oops-extract/sp-oops-extract_0.0.7-1.tar.gz | /home/peko/autobuild/instance-0/output/host/bin/tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/sp-oops-extract-0.0.7-1 -xf - >>> sp-oops-extract 0.0.7-1 Patching Applying 0001-Make-the-Makefile-more-cross-compiler-friendly.patch using patch: patching file src/Makefile Applying 0002-stdint-cleanup.patch using patch: patching file src/oopslog.c >>> sp-oops-extract 0.0.7-1 Configuring >>> sp-oops-extract 0.0.7-1 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j6 -C /home/peko/autobuild/instance-0/output/build/sp-oops-extract-0.0.7-1 PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ar" AS="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" LD="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" NM="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-nm" CC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" GCC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" CPP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-cpp" CXX="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-g++" FC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" F77="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gfortran" RANLIB="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ranlib" READELF="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-readelf" STRIP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-strip" OBJCOPY="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objcopy" OBJDUMP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-0/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-as" DEFAULT_LINKER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-0/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl for i in src; do /usr/bin/make -C $i; done /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o sp-oops-extract oopslog.c >>> sp-oops-extract 0.0.7-1 Installing to target PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j6 -C /home/peko/autobuild/instance-0/output/build/sp-oops-extract-0.0.7-1 install DESTDIR=/home/peko/autobuild/instance-0/output/target install src/sp-oops-extract /home/peko/autobuild/instance-0/output/target/usr/bin >>> squashfs e38956b92f738518c29734399629e7cdb33072d3 Downloading Fetching all references Could not fetch special ref 'e38956b92f738518c29734399629e7cdb33072d3'; assuming it is not special. fatal: reference is not a tree: e38956b92f738518c29734399629e7cdb33072d3 --2018-04-18 17:56:09-- http://sources.buildroot.net/squashfs/squashfs-e38956b92f738518c29734399629e7cdb33072d3.tar.gz Resolving sources.buildroot.net (sources.buildroot.net)... 104.27.167.48, 104.27.166.48, 2400:cb00:2048:1::681b:a630, ... Connecting to sources.buildroot.net (sources.buildroot.net)|104.27.167.48|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2018-04-18 17:56:09 ERROR 404: Not Found. --2018-04-18 17:56:09-- http://sources.buildroot.net/squashfs-e38956b92f738518c29734399629e7cdb33072d3.tar.gz Resolving sources.buildroot.net (sources.buildroot.net)... 104.27.167.48, 104.27.166.48, 2400:cb00:2048:1::681b:a630, ... Connecting to sources.buildroot.net (sources.buildroot.net)|104.27.167.48|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2018-04-18 17:56:09 ERROR 404: Not Found. make[1]: *** [/home/peko/autobuild/instance-0/output/build/squashfs-e38956b92f738518c29734399629e7cdb33072d3/.stamp_downloaded] Error 1 make: *** [_all] Error 2 make: Leaving directory `/home/peko/autobuild/instance-0/buildroot'