>>> stress-ng 0.17.07 Extracting
gzip -d -c /home/buildroot/autobuild/instance-2/dl/stress-ng/stress-ng-0.17.07.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-2/output-1/build/stress-ng-0.17.07   -xf -
>>> stress-ng 0.17.07 Patching
>>> stress-ng 0.17.07 Configuring
>>> stress-ng 0.17.07 Building
GIT_DIR=. PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" AR="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-gcc-ar" AS="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-as" LD="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-ld" NM="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-gcc-nm" CC="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-gcc" GCC="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-gcc" CPP="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-cpp" CXX="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-g++" FC="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-gfortran" F77="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-gfortran" RANLIB="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-gcc-ranlib" READELF="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Ofast -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Ofast -g0 " LDFLAGS="" FCFLAGS=" -Ofast -g0" FFLAGS=" -Ofast -g0" PKG_CONFIG="/home/buildroot/autobuild/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-2/output-1/host/microblaze-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-2/output-1/build/stress-ng-0.17.07 PRESERVE_CFLAGS=1 LDFLAGS=" -latomic"
make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/stress-ng-0.17.07'
Generating config..
fatal: not a git repository: '.'
/usr/bin/make CC="/home/buildroot/autobuild/instance-2/output-1/host/bin/microblaze-buildroot-linux-uclibc-gcc" CXX="no" STATIC= -f Makefile.config
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/stress-ng-0.17.07'
MK git-commit-id.h
using -lacl ... no
using -laio ... no
using -lapparmor ... no
using -lbsd ... no
using -ldl ... no
using -lcrypt ... no
using -lEGL ... no
using -lgmp ... no
using -lgbm ... no
using -lGLESv2 ... no
using -lIPSec_MB ... no
using -lJudy ... no
using -ljpeg ... no
using -lkmod ... no
using -lmd ... no
using -lmpfr ... no
using -lrt ... no
using -lsctp ... no
using -lpthread ... yes
using -lpthread spinlock ... yes
using -lxxhash ... no
using acl/libacl.h ... no
using aio.h ... no
using asm/cachectl.h ... no
using -lz ... yes
using asm/ldt.h ... no
using asm/mtrr.h ... no
using asm/prctl.h ... no
using attr/xattr.h ... no
using bsd/stdlib.h ... no
using bsd/string.h ... no
using bsd/sys/tree.h ... no
using bsd/unistd.h ... no
using bsd/wchar.h ... no
using crypt.h ... yes
using complex.h ... yes
using EGL/egl.h EGL/eglext.h ... no
using EGL/egl.h ... no
using fenv.h ... no
using features.h ... yes
using float.h ... yes
using gbm.h ... no
using GLES2/gl2.h ... no
using gmp.h ... no
using grp.h ... yes
using ifaddrs.h ... yes
using immintrin.h ... no
using intel-ipsec-mb.h ... no
using jpeglib.h ... no
using Judy.h ... no
using keyutils.h ... no
using libaio.h ... no
using libgen.h ... yes
using libkmod.h ... no
using link.h ... yes
using linux/android/binderfs.h ... yes
using linux/android/binder.h ... yes
using linux/audit.h ... yes
using linux/blkzoned.h ... yes
using linux/cdrom.h ... yes
using linux/cn_proc.h ... yes
using linux/connector.h ... yes
using linux/dm-ioctl.h ... yes
using linux/fd.h ... yes
using linux/fiemap.h ... yes
using linux/filter.h ... yes
using linux/fs.h ... yes
using linux/fsverity.h ... yes
using linux/futex.h ... yes
using linux/genetlink.h ... yes
using linux/hdreg.h ... yes
using linux/hidraw.h ... yes
using linux/hpet.h ... yes
using linux/if_alg.h ... yes
using linux/if_packet.h ... yes
using linux/if_tun.h ... yes
using linux/input.h ... yes
using linux/io_uring.h ... yes
using linux/kvm.h ... no
using linux/kd.h ... yes
using linux/landlock.h ... yes
using linux/lirc.h ... yes
using linux/loop.h ... yes
using linux/lsm.h ... yes
using linux/magic.h ... yes
using linux/media.h ... yes
using linux/membarrier.h ... yes
using linux/memfd.h ... yes
using linux/mempolicy.h ... yes
using linux/module.h ... yes
using linux/netlink.h ... yes
using linux/openat2.h ... yes
using linux/pci.h ... yes
using linux/perf_event.h ... yes
using linux/posix_types.h ... yes
using linux/ppdev.h ... yes
using linux/ptp_clock.h ... yes
using linux/random.h ... yes
using linux/rseq.h ... yes
using linux/rtc.h ... yes
using linux/seccomp.h ... yes
using linux/rtnetlink.h ... yes
using linux/serial.h ... yes
using linux/socket.h ... yes
using linux/sockios.h ... yes
using linux/sysctl.h ... yes
using linux/sockdiag.h ... yes
using linux/taskstats.h ... yes
using linux/udp.h ... yes
using linux/uinput.h ... yes
using linux/unix_diag.h ... yes
using linux/usb/cdc-wdm.h ... yes
using linux/usbdevice_fs.h ... yes
using linux/userfaultfd.h ... yes
using linux/version.h ... yes
using linux/vt.h ... yes
using linux/videodev2.h ... yes
using linux/watchdog.h ... yes
using locale.h ... yes
using mach/mach.h ... no
using mach/machine.h ... no
using mach/vm_statistics.h ... no
using malloc.h ... yes
using mntent.h ... yes
using mpfr.h ... no
using mqueue.h ... yes
using net/if.h ... yes
using netinet/ip.h ... yes
using netinet/ip_icmp.h ... yes
using netinet/sctp.h ... no
using netinet/tcp.h ... yes
using netinet/udp.h ... yes
using poll.h ... yes
using pthread_np.h ... no
using scsi/scsi.h ... yes
using scsi/scsi_ioctl.h ... yes
using scsi/sg.h ... yes
using search.h ... yes
using semaphore.h ... yes
using sound/asound.h ... yes
using strings.h ... yes
using spawn.h ... yes
using sys/acl.h ... no
using sys/apparmor.h ... no
using sys/auxv.h ... yes
using sys/capability.h ... no
using sys/syscall.h ... yes
using sys/epoll.h ... yes
using sys/eventfd.h ... yes
using sys/fanotify.h ... yes
using sys/fsuid.h ... yes
using sys/inotify.h ... yes
using sys/io.h ... no
using sys/loadavg.h ... no
using sys/ipc.h ... yes
using syslog.h ... yes
using sys/mkdev.h ... no
using sys/mount.h ... yes
using sys/msg.h ... yes
using sys/param.h ... yes
using sys/personality.h ... yes
using sys/pidfd.h ... no
using sys/platform/ppc.h ... no
using sys/prctl.h ... yes
using sys/queue.h ... yes
using sys/quota.h ... yes
using sys/random.h ... yes
using sys/rseq.h ... no
using sys/select.h ... yes
using sys/sendfile.h ... yes
using sys/shm.h ... yes
using sys/signalfd.h ... yes
using sys/statfs.h ... yes
using sys/statvfs.h ... yes
using sys/swap.h ... yes
using sys/sysinfo.h ... yes
using sys/sysctl.h ... yes
using sys/sysmacros.h ... yes
using sys/timerfd.h ... yes
using sys/tree.h ... no
using sys/timex.h ... yes
using sys/ucred.h ... no
using sys/uio.h ... yes
using sys/un.h ... yes
using sys/utsname.h ... yes
using sys/vfs.h ... yes
using sys/vmmeter.h ... no
using sys/xattr.h ... yes
using termios.h ... yes
using termio.h ... yes
using ucontext.h ... yes
using ustat.h ... no
using uvm/uvm_extern.h ... no
using utime.h ... yes
using wchar.h ... yes
using x86intrin.h ... no
using xmmintrin.h ... no
using xxhash.h ... no
using 128 byte alignment attribute ... yes
using ALPHA draina instruction ... no
using 64K byte alignment attribute ... no
using ALPHA halt instruction ... no
using 64 byte alignment attribute ... yes
using ARM tlbi instruction ... no
using ARM yield instruction ... no
using hppa diag instruction ... no
using hppa rfi instruction ... no
using loong64 dbar instruction ... no
using loong64 cpucfg instruction ... no
using loong64 rdtime instruction ... no
using loong64 tlbrd instruction ... no
using M68K eori.w on sr instruction ... no
using loong64 tlbsrch instruction ... no
using MIPS wait instruction ... no
using memory barrier ... yes
using ppc64 darn instruction ... no
using generic nop instruction ... yes
using asm("") ... yes
using ppc64 dcbst instruction ... no
using ppc64 dcbt instruction ... no
using ppc64 dcbtst instruction ... no
using ppc64 icbi instruction ... no
using ppc64 msync instruction ... no
using ppc64 tlbie instruction ... no
using RISC-V fence instruction ... no
using RISC-V fence.i instruction ... no
using RISC-V sfence.vma instruction ... no
using s390 ptlb instruction ... no
using SH4 rte instruction ... no
using SH4 sleep instruction ... no
using SPARC membar instruction ... no
using SPARC rdpr instruction ... no
using SPARC tick instruction ... no
using x86 cldemote instruction ... no
using x86 clflush instruction ... no
using x86 clts instruction ... no
using x86 clflushopt instruction ... no
using x86 clwb instruction ... no
using x86 hlt instruction ... no
using x86 invd instruction ... no
using x86 invpg instruction ... no
using x86 lfence instruction ... no
using x86 lgdt instruction ... no
using x86 lldt instruction ... no
using x86 lmsw instruction ... no
using x86 mfence instruction ... no
using x86 mov to cr0 instruction ... no
using x86 pause instruction ... no
using x86 mov to dr0 instruction ... no
using x86 prefetchtnta instruction ... no
using x86 prefetcht0 instruction ... no
using x86 prefetcht1 instruction ... no
using x86 prefetcht2 instruction ... no
using x86 rdmsr instruction ... no
using x86 rdpmc instruction ... no
using x86 rdrand instruction ... no
using x86 rdseed instruction ... no
using x86 rdtsc instruction ... no
using x86 rdtscp instruction ... no
using x86 rep stosb instruction ... no
using x86 rep stosd instruction ... no
using x86 rep stosq instruction ... no
using x86 rep stosw instruction ... no
using x86 serialize instruction ... no
using x86 sfence instruction ... no
using x86 tpause instruction ... no
using x86 wrinvd instruction ... no
using x86 wrmsr instruction ... no
using __attribute__((always_inline)) ... yes
using __attribute__((hot)) ... yes
using __attribute__((fast_math)) ... yes
using __attribute__((noinline)) ... yes
using __attribute__((packed)) ... yes
using __attribute__((noreturn)) ... yes
using __attribute__((pure)) ... yes
using __attribute__((warn_unused_result)) ... yes
using _mm256_add_epi8 intrinsic ... no
using _mm256_dpbusd_epi32 intrinsic ... no
using __attribute__((weak)) ... yes
using label as value feature ... yes
using _mm256_dpwssd_epi32 intrinsic ... no
using _mm256_loadu_si256 intrinsic ... no
using _mm256_storeu_si256 intrinsic ... no
using _mm512_add_epi8 intrinsic ... no
using _mm512_dpbusd_epi32 intrinsic ... no
using _mm512_dpwssd_epi32 intrinsic ... no
using _mm512_loadu_si512 intrinsic ... no
using _mm512_storeu_si512 intrinsic ... no
using _mm_add_epi8 intrinsic ... no
using _mm_dpbusd_epi32 intrinsic ... no
using _mm_dpwssd_epi32 intrinsic ... no
using _mm_loadu_si128 intrinsic ... no
using _mm_storeu_si128 intrinsic ... no
using pragma gcc no-hard-dfp ... no
using pragma push/pop ... yes
using pragma inside functions ... yes
using target_clones attribute ... no
using target_clones arch=alderlake attribute (x86) ... no
using __restrict keyword ... yes
using target_clones arch=arrowlake attribute (x86) ... no
using target_clones avx attribute (x86) ... no
using target_clones avx2 attribute (x86) ... no
using target_clones avxvnni attribute (x86) ... no
using target_clones arch=cooperlake attribute (x86) ... no
using target_clones arch=graniterapids attribute (x86) ... no
using target_clones mmx attribute (x86) ... no
using target_clones arch=pantherlake attribute (x86) ... no
using target_clones cpu=power attribute (power9) ... no
using target_clones arch=rocketlake attribute (x86) ... no
using target_clones arch=sapphirerapids attribute (x86) ... no
using target_clones arch=skylake-avx512 attribute (x86) ... no
using target_clones sse attribute (x86) ... no
using target_clones sse2 attribute (x86) ... no
using target_clones sse3 attribute (x86) ... no
using target_clones sse4_1 attribute (x86) ... no
using target_clones sse4_2 attribute (x86) ... no
using target_clones ssse3 attribute (x86) ... no
using target_clones arch=tigerlake attribute (x86) ... no
using variable length array function args ... yes
using struct cdrom_blk ... yes
using struct cdrom_mcn ... yes
using struct cdrom_msf ... yes
using struct cdrom_read_audio ... yes
using struct cdrom_subchnl ... yes
using struct cdrom_ti ... yes
using struct cdrom_tocentry ... yes
using struct cdrom_tochdr ... yes
using struct cdrom_volctrl ... yes
using complex ... yes
using struct consolefontdesc ... yes
using _Decimal128 ... no
using daddr_t ... yes
using _Decimal32 ... no
using _Decimal64 ... no
using struct dirent d_type ... yes
using struct dm_ioctl ... yes
using dvd_authinfo ... yes
using __float128 ... no
using dvd_struct ... yes
using __fp16 ... no
using _Float128 ... no
using _Float16 ... no
using _Float128x ... no
using _Float32 ... yes
using _Float16x ... no
using __float80 ... no
using _Float64 ... yes
using _Float80 ... no
using _Float32x ... yes
using _Float64x ... no
using _Float80x ... no
using struct floppy_drive_struct ... yes
using struct floppy_fdc_state ... yes
using struct floppy_struct ... yes
using struct fs_sysfs_path ... no
using struct floppy_write_errors ... yes
using struct fsuuid2 ... no
using struct fsverity_digest ... yes
using struct fsverity_enable_arg ... yes
using struct fsxattr ... yes
using struct iphdr and icmphdr ... yes
using struct ifconf ... yes
using struct ifreq ... yes
using int128_t ... no
using ino64_t ... yes
using struct iphdr ... yes
using __itimer_which_t ... yes
using struct kbdiacrs ... yes
using struct kbentry ... yes
using struct kbkeycode ... yes
using struct kbsentry ... yes
using __kernel_long_t ... yes
using __kernel_ulong_t ... yes
using key_t ... yes
using landlock_rule_type ... yes
using struct landlock_ruleset_attr ... yes
using loff_t ... yes
using struct media_device_info ... yes
using struct mnt_id_req ... yes
using mode_t ... yes
using struct mtrr_gentry ... no
using struct mtrr_sentry ... no
using struct msginfo ... yes
using off64_t ... yes
using struct open_how ... no
using off_t ... yes
using __pid_type ... yes
using __priority_which_t ... yes
using pthread_mutexattr_t ... yes
using ptrace_request ... yes
using pthread_mutex_t ... yes
using __rlimit_resource_t ... yes
using struct rtc_param ... yes
using struct rusage.ru_maxrss ... yes
using struct rusage.ru_minflt ... yes
using struct rusage.ru_nvcsw ... yes
using struct sctp_association ... no
using __rusage_who_t ... yes
using struct sctp_assocparams ... no
using struct sctp_assoc_stats ... no
using struct sctp_assoc_value ... no
using struct sctp_default_prinfo ... no
using struct sctp_event_subscribe ... no
using struct sctp_getaddrs ... no
using struct sctp_initmsg ... no
using struct sctp_paddrinfo ... no
using struct sctp_paddrparams ... no
using struct sctp_prim ... no
using struct sctp_probeinterval ... no
using struct sctp_rtoinfo ... no
using struct sctp_sched_type ... no
using struct sctp_setadaption ... no
using struct sctp_status ... no
using struct sctp_stream_value ... no
using struct seccomp_notif_sizes ... yes
using struct serial_icounter_struct ... yes
using struct serial_struct ... yes
using struct shmid_ds ... yes
using struct shminfo ... yes
using struct snd_ctl_card_info ... yes
using struct snd_ctl_tlv ... yes
using struct sockaddr_un ... yes
using struct termios ... yes
using struct timex ... yes
using struct tpacket_req3 ... yes
using struct unimapdesc ... yes
using struct user_desc ... no
using struct usbdevfs_getdriver ... yes
using __v2di ... no
using struct utimbuf ... yes
using struct v4l2_audio ... yes
using struct v4l2_audioout ... yes
using struct v4l2_capability ... yes
using struct v4l2_dv_timings ... yes
using struct v4l2_enc_idx ... yes
using struct v4l2_framebuffer ... yes
using struct vt_consize ... yes
using struct v4l2_jpegcompression ... yes
using v4l2_std_id ... yes
using struct vt_mode ... yes
using struct vt_sizes ... yes
using struct vt_stat ... yes
using struct winsize ... yes
using __rseq_offset ... no
using accept4 ... yes
using adjtime ... yes
using aio_cancel ... no
using adjtimex ... yes
using aio_read ... no
using aio_fsync ... no
using aio_write ... no
using arch_prctl ... no
using aligned_alloc ... yes
using arc4random ... no
using atomics with -latomic ... yes
using __atomic_add_fetch ... yes
using __atomic_and_fetch ... yes
using __atomic_clear ... yes
using __atomic_compare_exchange ... yes
using __atomic_fetch_add ... yes
using __atomic_fetch_add_2 ... yes
using __atomic_fetch_add_8 ... yes
using __atomic_fetch_add_4 ... yes
using __atomic_fetch_and ... yes
using __atomic_fetch_nand ... yes
using __atomic_fetch_or ... yes
using __atomic_fetch_sub ... yes
using __atomic_fetch_xor ... yes
using __atomic_load ... yes
using __atomic_load_double ... yes
using __atomic_nand_fetch ... yes
using __atomic_or_fetch ... yes
using __atomic_store ... yes
using __atomic_store_double ... yes
using __atomic_sub_fetch ... yes
using __atomic_test_and_set ... yes
using strlcat ... no
using __atomic_xor_fetch ... yes
using brk ... yes
using strlcpy ... no
using __builtin_assume_aligned ... yes
using bsearch ... yes
using __builtin_bitreverse ... no
using __builtin_bswap32 ... yes
using __builtin_cabs ... yes
using __builtin_cabsf ... yes
using __builtin_cabsl ... yes
using __builtin_cbrt ... yes
using __builtin_cbrtf ... yes
using __builtin_cbrtl ... yes
using __builtin_ccos ... no
using __builtin_ccosf ... no
using __builtin_ccosl ... no
using __builtin_cexp ... yes
using __builtin_cexpf ... yes
using __builtin_cexpl ... yes
using __builtin___clear_cache ... yes
using __builtin_clog ... no
using __builtin_clogf ... no
using __builtin_clogl ... no
using __builtin_clz ... yes
using __builtin_clzl ... yes
using __builtin_clzll ... yes
using __builtin_constant_p ... yes
using __builtin_cosf ... yes
using __builtin_cos ... yes
using __builtin_coshl ... yes
using __builtin_cosl ... yes
using __builtin_cpow ... no
using __builtin_cpowf ... no
using __builtin_cpu_is(power9) ... no
using __builtin_cpowl ... no
using __builtin_csin ... no
using __builtin_csinf ... no
using __builtin_csinl ... no
using __builtin_csqrt ... no
using __builtin_csqrtf ... no
using __builtin_ctz ... yes
using __builtin_csqrtl ... no
using __builtin_exp ... yes
using __builtin_exp10 ... yes
using __builtin_exp10f ... yes
using __builtin_exp10l ... yes
using __builtin_exp2 ... yes
using __builtin_exp2f ... yes
using __builtin_exp2l ... yes
using __builtin_expect ... yes
using __builtin_expf ... yes
using __builtin_expl ... yes
using __builtin_fabs ... yes
using __builtin_fabsf ... yes
using __builtin_fabsl ... yes
using __builtin_fma ... yes
using __builtin_fmaf ... yes
using __builtin_hypot ... yes
using __builtin_hypotf ... yes
using __builtin_hypotl ... no
using __builtin_ia32_movntdq ... no
using __builtin_ia32_movnti ... no
using __builtin_ia32_movnti64 ... no
using __builtin_llabs ... yes
using __builtin_lgammal ... yes
using __builtin_log ... yes
using __builtin_log10 ... yes
using __builtin_log10f ... yes
using __builtin_log10l ... yes
using __builtin_log2 ... yes
using __builtin_log2f ... yes
using __builtin_log2l ... yes
using __builtin_logb ... yes
using __builtin_logbf ... yes
using __builtin_logbl ... yes
using __builtin_memcmp ... yes
using __builtin_logf ... yes
using __builtin_logl ... yes
using __builtin_memcpy ... yes
using __builtin_memmove ... yes
using __builtin_memset ... yes
using __builtin_nontemporal_load ... no
using __builtin_nontemporal_store ... no
using __builtin_parity ... yes
using __builtin_popcount ... yes
using __builtin_popcountl ... yes
using __builtin_popcountll ... yes
using __builtin_pow ... yes
using __builtin_powf ... yes
using __builtin_powl ... yes
using __builtin_prefetch ... yes
using __builtin_rint ... yes
using __builtin_rintl ... yes
using __builtin_rotateleft16 ... no
using __builtin_rotateleft32 ... no
using __builtin_rotateleft64 ... no
using __builtin_rotateleft8 ... no
using __builtin_rotateright16 ... no
using __builtin_rotateright32 ... no
using __builtin_rotateright64 ... no
using __builtin_rotateright8 ... no
using __builtin_roundl ... yes
using __builtin_ia32_sfence ... no
using __builtin_sin ... yes
using __builtin_sincos ... yes
using __builtin_shuffle ... yes
using __builtin_sincosf ... yes
using __builtin_sincosl ... yes
using __builtin_sinf ... yes
using __builtin_sinhl ... yes
using __builtin_sinl ... yes
using __builtin_sqrt ... yes
using __builtin_sqrtl ... yes
using __builtin_sqrtf ... yes
using __builtin_supports ... no
using __builtin_tanf ... yes
using __builtin_tan ... yes
using __builtin_tanl ... yes
using __builtin_thread_pointer ... no
using cacheflush ... no
using cabsl ... yes
using cbrt ... yes
using cbrtf ... yes
using cbrtl ... yes
using ccosf ... no
using ccosf ... no
using ccosl ... no
using cexp ... yes
using cexp ... yes
using cexpl ... yes
using cfgetispeed ... yes
using cfgetospeed ... yes
using chroot ... yes
using cimag ... no
using cimagf ... no
using cimagl ... no
using clearenv ... yes
using clock_adjtime ... yes
using clock_getres ... yes
using clock_gettime ... yes
using clock_nanosleep ... yes
using clock_settime ... yes
using clog ... no
using clogf ... no
using clogl ... no
using clone ... yes
using copy_file_range ... no
using coshl ... yes
using cosl ... yes
using cpow ... no
using cpowf ... no
using cpowl ... no
using creal ... no
using crealf ... no
using crypt_r ... no
using creall ... no
using csin ... no
using csinf ... no
using csinl ... no
using csqrt ... no
using csqrtf ... no
using csqrtl ... no
using delete_module ... yes
using eigen C++ functions ... no, not using gcc
using drand48 ... yes
using dup3 ... no
using endmntent ... yes
using endpwent ... yes
using epoll_create ... yes
using epoll_create1 ... yes
using eventfd ... yes
using __executable_start ... yes
using execveat ... yes
using exp ... yes
using exp10 ... yes
using exp10f ... yes
using exp10l ... yes
using exp2 ... yes
using exp2f ... yes
using exp2l ... yes
using expf ... yes
using expl ... yes
using faccessat ... yes
using faccessat2 ... no
using fallocate ... yes
using fchmodat ... yes
using fanotify ... yes
using fchmodat2 ... no
using fchownat ... yes
using fdatasync ... yes
using fgetxattr ... yes
using finit_module ... no
using flistxattr ... yes
using flock ... yes
using vector math ... yes
using fma ... yes
using fmaf ... yes
using fremovexattr ... yes
using fsetxattr ... yes
using fstat ... yes
using fstatat ... yes
using fsync ... yes
using futimens ... yes
using futimes ... no
using futimesat ... yes
using getauxval ... yes
using getcpu ... no
using getdomainname ... yes
using getdtablesize ... yes
using getentropy ... no
using getexecname ... no
using gethostid ... yes
using gethostname ... yes
using getitimer ... yes
using getloadavg ... yes
using getmntinfo ... no
using getmntent ... yes
using getpgrp ... no
using getpagesize ... yes
using getpgid ... yes
using getpriority ... yes
using getpwent ... yes
using getrandom ... yes
using getresgid ... yes
using getresuid ... yes
using getrusage ... yes
using getsid ... yes
using gettid ... no
using gettimeofday ... yes
using getxattr ... yes
using hsearch ... yes
using hypot ... yes
using hypotf ... yes
using index ... no
using hypotl ... no
using intrinsic __rolb ... no
using intrinsic __rold ... no
using inotify ... yes
using intrinsic __rolq ... no
using inotify1 ... yes
using intrinsic __rolw ... no
using intrinsic __rorb ... no
using intrinsic __rord ... no
using intrinsic __rorq ... no
using intrinsic __rorw ... no
using iopl ... no
using ioport ... no
using lgammal ... yes
using lgetxattr ... yes
using linkat ... yes
using listxattr ... yes
using llistxattr ... yes
using lockf ... yes
using log ... yes
using log10 ... yes
using log10f ... yes
using log10l ... yes
using log2 ... yes
using log2f ... yes
using log2l ... yes
using logb ... yes
using logbf ... yes
using logbl ... yes
using logf ... yes
using lookup_dcookie ... yes
using logl ... yes
using lrand48 ... yes
using lremovexattr ... yes
using lsetxattr ... yes
using lseek64 ... yes
using lsearch ... yes
using lsm_get_self_attr ... no
using madvise ... yes
using lst_list_modules ... no
using lstat ... yes
using malloc_trim ... yes
using malloc_usable_size ... yes
using mallopt ... yes
using memalign ... yes
using membarrier ... no
using memfd_create ... no
using mincore ... yes
using mkdirat ... yes
using mknodat ... yes
using mlock ... yes
using mlock2 ... no
using _mm_stream_si128 ... no
using mlockall ... yes
using _mm_stream_si32 ... no
using _mm_stream_si64 ... no
using modify_ldt ... no
using mprotect ... yes
using POSIX message queues ... no
using SYSV message queues ... yes
using mquery ... no
using mremap ... yes
using msync ... yes
using munlock ... yes
using munlockall ... yes
using name_to_handle_at ... yes
using nanosleep ... yes
using nice ... yes
using openat ... yes
using openat2 ... yes
using open_by_handle_at ... yes
using personality ... yes
using open_memstream ... yes
using pidfd_open ... no
using pidfd_getfd ... no
using pidfd_send_signal ... yes
using pipe2 ... yes
using pkey_alloc ... no
using pkey_free ... no
using pkey_get ... no
using pkey_mprotect ... no
using pkey_set ... no
using posix_fadvise ... yes
using posix_fallocate ... yes
using posix_madvise ... yes
using posix_memalign ... yes
using posix_openpt ... yes
using pow ... yes
using posix_spawn ... yes
using powf ... yes
using __ppc_get_timebase ... no
using powl ... yes
using ppoll ... yes
using prctl ... yes
using pread ... yes
using preadv ... yes
using preadv2 ... no
using prlimit ... yes
using process_vm_readv ... no
using process_vm_writev ... no
using program_invocation_name ... yes
using pselect ... yes
using pthread_attr_setstack ... yes
using pthread_mutexattr_destroy ... yes
using pthread_mutexattr_init ... yes
using pthread_mutexattr_setprioceiling ... yes
using pthread_mutexattr_setprotocol ... yes
using pthread_mutexattr_setrobust ... yes
using pthread_mutex_destroy ... yes
using pthread_mutex_init ... yes
using pthread_setaffinity_np ... yes
using pthread_setschedparam ... yes
using ptrace ... no
using pthread_sigqueue ... yes
using ptsname ... yes
using pwrite ... yes
using pwritev ... yes
using pwritev2 ... no
using quotactl_fd ... no
using readlinkat ... yes
using remap_file_pages ... yes
using removexattr ... yes
using recvmmsg ... yes
using renameat ... yes
using rindex ... no
using rfork ... no
using renameat2 ... no
using rintl ... yes
using sbrk ... yes
using sched_getaffinity ... yes
using sched_getcpu ... yes
using sched_get_priority_max ... yes
using sched_get_priority_min ... yes
using sched_rr_get_interval ... yes
using sched_setaffinity ... yes
using sched_setscheduler ... yes
using sched_yield ... yes
using select ... yes
using POSIX semaphores ... yes
using semtimedop ... yes
using sendfile ... yes
using SYSV semaphores ... yes
using sendmmsg ... yes
using setdomainname ... yes
using setfsgid ... yes
using setfsuid ... yes
using setitimer ... yes
using setmntent ... yes
using setpgid ... yes
using setns ... yes
using setproctitle ... no
using setpgrp ... yes
using setpriority ... yes
using setpwent ... yes
using setregid ... yes
using setresgid ... yes
using setresuid ... yes
using setreuid ... yes
using settimeofday ... yes
using setxattr ... yes
using SYSV shm ... yes
using sigaltstack ... yes
using signalfd ... yes
using sigqueue ... yes
using sigwaitinfo ... yes
using sincos ... yes
using sincosf ... yes
using sincosl ... yes
using sinhl ... yes
using sinl ... yes
using splice ... yes
using sqrt ... yes
using sqrtf ... yes
using sqrtl ... yes
using srand48 ... yes
using statx ... no
using stat ... yes
using statfs ... yes
using stime ... yes
using swapcontext ... no
using swapon ... yes
using symlinkat ... yes
using sync_bool_compare_and_swap ... yes
using sync_file_range ... yes
using __sync_synchronize ... yes
using syncfs ... yes
using sysinfo ... yes
using syscall ... yes
using tcdrain ... yes
using tcflow ... yes
using tcflush ... yes
using tcgetattr ... yes
using tee ... yes
using tgkill ... no
using timer_delete ... yes
using timerfd_create ... yes
using timerfd_gettime ... yes
using timerfd_settime ... yes
using timer_getoverrrun ... yes
using timer_gettime ... yes
using timer_settime ... yes
using time ... yes
using timer_create ... yes
using tsearch ... yes
using ttyname ... yes
using umount2 ... yes
using uname ... yes
using ustat ... no
using unlinkat ... yes
using unshare ... yes
using utime ... yes
using utimensat ... yes
using valloc ... yes
using vfork ... yes
using vhangup ... yes
using vmsplice ... yes
using wait3 ... yes
using waitid ... yes
using wait4 ... yes
using wcscasecmp ... no
using wcscat ... no
using waitpid ... yes
using wcschr ... no
using wcscmp ... no
using wcscoll ... no
using wcscpy ... no
using wcslcat ... no
using wcslcpy ... no
using wcslen ... no
using wcsncasecmp ... no
using wcsncat ... no
using wcsncmp ... no
using wcsrchr ... no
using wcsxfrm ... no
944 configurations checked
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/stress-ng-0.17.07'
Generating empty AppArmor profile
CC stress-eigen-ops.c
MK io-uring.h
MK personality.h
CC apparmor-data.c
CC core-perf.c
CC core-processes.c
CC core-resources.c
CC core-sched.c
CC core-setting.c
In file included from core-sched.c:25:
core-sched.c: In function 'stress_set_sched':
core-sched.c:170:22: error: 'struct shim_sched_attr' has no member named '__sched_priority'; did you mean 'sched_priority'?
  170 |                 attr.sched_priority = (unsigned int)sched_priority;
      |                      ^~~~~~~~~~~~~~
core-sched.c:173:38: error: 'struct shim_sched_attr' has no member named '__sched_priority'; did you mean 'sched_priority'?
  173 |                                 attr.sched_priority = (uint32_t)max;
      |                                      ^~~~~~~~~~~~~~
core-sched.c:175:38: error: 'struct shim_sched_attr' has no member named '__sched_priority'; did you mean 'sched_priority'?
  175 |                                 attr.sched_priority = (uint32_t)((max - min) / 2);
      |                                      ^~~~~~~~~~~~~~
core-sched.c:178:54: error: 'struct shim_sched_attr' has no member named '__sched_priority'; did you mean 'sched_priority'?
  178 |                                         prefix, attr.sched_priority);
      |                                                      ^~~~~~~~~~~~~~
core-sched.c:180:27: error: 'struct shim_sched_attr' has no member named '__sched_priority'; did you mean 'sched_priority'?
  180 |                 if ((attr.sched_priority < (uint32_t)min) ||
      |                           ^~~~~~~~~~~~~~
core-sched.c:181:27: error: 'struct shim_sched_attr' has no member named '__sched_priority'; did you mean 'sched_priority'?
  181 |                     (attr.sched_priority > (uint32_t)max)) {
      |                           ^~~~~~~~~~~~~~
make[1]: *** [Makefile:665: core-sched.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/stress-ng-0.17.07'
make: *** [package/pkg-generic.mk:283: /home/buildroot/autobuild/instance-2/output-1/build/stress-ng-0.17.07/.stamp_built] Error 2
make: Leaving directory '/home/buildroot/autobuild/instance-2/buildroot'