From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: match_ipv6_address_cmd From cli: "match ipv6 address WORD" to New cli: "match ipv6 address WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ipv6_address_cmd From cli: "no match ipv6 address WORD" to New cli: "no match ipv6 address" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: match_ipv6_address_prefix_list_cmd From cli: "match ipv6 address prefix-list WORD" to New cli: "match ipv6 address prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ipv6_address_prefix_list_cmd From cli: "no match ipv6 address prefix-list WORD" to New cli: "no match ipv6 address prefix-list" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: match_ip_address_cmd From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_address_cmd From cli: "no match ip address" to New cli: "no match ip address" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_address_val_cmd From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: match_ip_address_prefix_list_cmd From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_address_prefix_list_cmd From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: match_tag_cmd From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_tag_cmd From cli: "no match tag" to New cli: "no match tag" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_tag_val_cmd From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: set_tag_cmd From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_set_tag_cmd From cli: "no set tag" to New cli: "no set tag" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_set_tag_val_cmd From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D Duplicate CLI Function: match_metric_cmd From cli: "match metric <0-4294967295>" to New cli: "match metric <0-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_metric_cmd From cli: "no match metric" to New cli: "no match metric" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_metric_val_cmd From cli: "no match metric <0-4294967295>" to New cli: "no match metric <0-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_interface_cmd From cli: "match interface WORD" to New cli: "match interface WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_interface_cmd From cli: "no match interface" to New cli: "no match interface" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_interface_val_cmd From cli: "no match interface WORD" to New cli: "no match interface WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_ip_next_hop_cmd From cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_next_hop_cmd From cli: "no match ip next-hop" to New cli: "no match ip next-hop" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_next_hop_val_cmd From cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_ip_address_cmd From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_address_cmd From cli: "no match ip address" to New cli: "no match ip address" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_address_val_cmd From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_ip_address_prefix_list_cmd From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_address_prefix_list_cmd From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_tag_cmd From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_tag_cmd From cli: "no match tag" to New cli: "no match tag" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_tag_val_cmd From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: set_metric_addsub_cmd From cli: "set metric <+/-metric>" to New cli: "set metric <+/-metric>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: set_ip_nexthop_cmd From cli: "set ip next-hop A.B.C.D" to New cli: "set ip next-hop A.B.C.D" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_ip_nexthop_cmd From cli: "no set ip next-hop" to New cli: "no set ip next-hop" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_ip_nexthop_val_cmd From cli: "no set ip next-hop A.B.C.D" to New cli: "no set ip next-hop A.B.C.D" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: set_tag_cmd From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_tag_cmd From cli: "no set tag" to New cli: "no set tag" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_tag_val_cmd From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: router_zebra_cmd From cli: "router zebra" to New cli: "router zebra" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_router_zebra_cmd From cli: "no router zebra" to New cli: "no router zebra" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_metric_cmd From cli: "match metric <0-4294967295>" to New cli: "match metric <0-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_metric_cmd From cli: "no match metric" to New cli: "no match metric" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_metric_val_cmd From cli: "no match metric <0-4294967295>" to New cli: "no match metric <0-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: match_interface_cmd From cli: "match interface WORD" to New cli: "match interface WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_interface_cmd From cli: "no match interface" to New cli: "no match interface" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_interface_val_cmd From cli: "no match interface WORD" to New cli: "no match interface WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: match_tag_cmd From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_tag_cmd From cli: "no match tag" to New cli: "no match tag" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_tag_val_cmd From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: set_ipv6_nexthop_local_cmd From cli: "set ipv6 next-hop local X:X::X:X" to New cli: "set ipv6 next-hop local X:X::X:X" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_ipv6_nexthop_local_cmd From cli: "no set ipv6 next-hop local" to New cli: "no set ipv6 next-hop local" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_ipv6_nexthop_local_val_cmd From cli: "no set ipv6 next-hop local X:X::X:X" to New cli: "no set ipv6 next-hop local X:X::X:X" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: set_tag_cmd From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_tag_cmd From cli: "no set tag" to New cli: "no set tag" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_tag_val_cmd From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: router_zebra_cmd From cli: "router zebra" to New cli: "router zebra" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_router_zebra_cmd From cli: "no router zebra" to New cli: "no router zebra" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: match_interface_cmd From cli: "match interface WORD" to New cli: "match interface WORD" Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_interface_cmd From cli: "no match interface" to New cli: "no match interface" Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_interface_val_cmd From cli: "no match interface WORD" to New cli: "no match interface WORD" Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: match_ip_next_hop_cmd From cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_next_hop_cmd From cli: "no match ip next-hop" to New cli: "no match ip next-hop" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_next_hop_val_cmd From cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: match_ip_address_cmd From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_address_cmd From cli: "no match ip address" to New cli: "no match ip address" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_address_val_cmd From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: match_ip_address_prefix_list_cmd From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_address_prefix_list_cmd From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA sed \ -e 's/"vtysh\.h"/"tests.h"/' \ -e 's/vtysh_init_cmd/test_init_cmd/' \ -e 's/VTYSH_[A-Z][A-Z_0-9]*/0/g' \ < ../vtysh/vtysh_cmd.c \ > test-commands-defun.c /usr/bin/make all-am make[5]: Nothing to be done for `all-am'. >>> quagga 1.2.3 Installing to target PATH="/home/buildroot/autobuild/run/instance-0/output/host/bin:/home/buildroot/autobuild/run/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-0/output/target install -C /home/buildroot/autobuild/run/instance-0/output/build/quagga-1.2.3/ Making install in lib true /usr/bin/make install-am /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output/target/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libzebra.la '/home/buildroot/autobuild/run/instance-0/output/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output/target/usr/include/quagga' /usr/bin/install -c -m 644 buffer.h checksum.h command.h filter.h getopt.h hash.h if.h linklist.h log.h memory.h network.h prefix.h routemap.h distribute.h sockunion.h str.h stream.h table.h thread.h vector.h version.h vty.h zebra.h plist.h zclient.h sockopt.h smux.h md5.h if_rmap.h keychain.h privs.h sigevent.h pqueue.h jhash.h zassert.h memtypes.h workqueue.h route_types.h libospf.h vrf.h '/home/buildroot/autobuild/run/instance-0/output/target/usr/include/quagga' /usr/bin/install -c -m 644 fifo.h event_counter.h nexthop.h '/home/buildroot/autobuild/run/instance-0/output/target/usr/include/quagga' libtool: install: /usr/bin/install -c .libs/libzebra.so.1.0.0 /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/libzebra.so.1.0.0 libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output/target/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so.1 || { rm -f libzebra.so.1 && ln -s libzebra.so.1.0.0 libzebra.so.1; }; }) libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output/target/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so || { rm -f libzebra.so && ln -s libzebra.so.1.0.0 libzebra.so; }; }) libtool: install: /usr/bin/install -c .libs/libzebra.lai /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/libzebra.la libtool: warning: remember to run 'libtool --finish /usr/lib' Making install in qpb /usr/bin/make install-am make[5]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output/target/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libquagga_pb.la '/home/buildroot/autobuild/run/instance-0/output/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libquagga_pb.so.0.0.0 /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/libquagga_pb.so.0.0.0 libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output/target/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so.0 || { rm -f libquagga_pb.so.0 && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output/target/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so || { rm -f libquagga_pb.so && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so; }; }) libtool: install: /usr/bin/install -c .libs/libquagga_pb.lai /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/libquagga_pb.la libtool: warning: remember to run 'libtool --finish /usr/lib' Making install in fpm /usr/bin/make install-am make[5]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-0/output/target/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libfpm_pb.la '/home/buildroot/autobuild/run/instance-0/output/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libfpm_pb.so.0.0.0 /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/libfpm_pb.so.0.0.0 libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output/target/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so.0 || { rm -f libfpm_pb.so.0 && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/run/instance-0/output/target/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so || { rm -f libfpm_pb.so && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so; }; }) libtool: install: /usr/bin/install -c .libs/libfpm_pb.lai /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/libfpm_pb.la libtool: warning: remember to run 'libtool --finish /usr/lib' Making install in m4 make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. Making install in redhat make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. Making install in tests /usr/bin/make install-am make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/buildroot/autobuild/run/instance-0/output/build/packages-file-list.txt ./support/scripts/check-uniq-files -t staging /home/buildroot/autobuild/run/instance-0/output/build/packages-file-list-staging.txt Warning: staging file "./usr/lib/libmediastreamer_voip.la" is touched by more than one package: [u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libosip2.la" is touched by more than one package: [u'libosip2', u'libeXosip2', u'libogg', u'libupnp18', u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libspeexdsp.la" is touched by more than one package: [u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libogg.la" is touched by more than one package: [u'libogg', u'libupnp18', u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libexpat.la" is touched by more than one package: [u'expat', u'dbus', u'gettext', u'libosip2', u'libeXosip2', u'libogg', u'libupnp18', u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libeXosip2.la" is touched by more than one package: [u'libeXosip2', u'libogg', u'libupnp18', u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libosipparser2.la" is touched by more than one package: [u'libosip2', u'libeXosip2', u'libogg', u'libupnp18', u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libortp.la" is touched by more than one package: [u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libdbus-1.la" is touched by more than one package: [u'dbus', u'gettext', u'libosip2', u'libeXosip2', u'libogg', u'libupnp18', u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libmediastreamer_base.la" is touched by more than one package: [u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/liblinphone.la" is touched by more than one package: [u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libupnp.la" is touched by more than one package: [u'libupnp18', u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libixml.la" is touched by more than one package: [u'libupnp18', u'speexdsp', u'speex', u'linphone', u'mp4v2'] Warning: staging file "./usr/lib/libspeex.la" is touched by more than one package: [u'speex', u'linphone', u'mp4v2'] ./support/scripts/check-uniq-files -t host /home/buildroot/autobuild/run/instance-0/output/build/packages-file-list-host.txt Warning: host file "./aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libosip2.la" is touched by more than one package: [u'host-libxml2', u'host-patchelf'] Warning: host file "./aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libexpat.la" is touched by more than one package: [u'host-m4', u'host-libxml2', u'host-patchelf'] Warning: host file "./aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libosipparser2.la" is touched by more than one package: [u'host-libxml2', u'host-patchelf'] Warning: host file "./aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libixml.la" is touched by more than one package: [u'host-libxml2', u'host-patchelf'] Warning: host file "./aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libeXosip2.la" is touched by more than one package: [u'host-libxml2', u'host-patchelf'] Warning: host file "./aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libogg.la" is touched by more than one package: [u'host-libxml2', u'host-patchelf'] Warning: host file "./aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libupnp.la" is touched by more than one package: [u'host-libxml2', u'host-patchelf'] Warning: host file "./aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libdbus-1.la" is touched by more than one package: [u'host-m4', u'host-libxml2', u'host-patchelf'] /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/run/instance-0/output/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-0/output/target/etc/inittab if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-0/output/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-0/output/target/etc/shells; fi grep: ./.config: No such file or directory if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-0/output/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-0/output/target/etc/shells; fi grep: ./.config: No such file or directory mkdir -p /home/buildroot/autobuild/run/instance-0/output/host/etc/meson sed -e "s%@TARGET_CROSS@%/home/buildroot/autobuild/run/instance-0/output/host/bin/aarch64_be-linux-gnu-%g" -e "s%@TARGET_ARCH@%aarch64%g" -e "s%@TARGET_CPU@%cortex-a53%g" -e "s%@TARGET_ENDIAN@%"big"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os `%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os `%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-0/output/host%g" package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-0/output/host/etc/meson/cross-compilation.conf mkdir -p /home/buildroot/autobuild/run/instance-0/output/target/etc echo "buildroot" > /home/buildroot/autobuild/run/instance-0/output/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-0/output/target/etc/hosts mkdir -p /home/buildroot/autobuild/run/instance-0/output/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-0/output/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-0/output/target/etc/shadow rm -f /home/buildroot/autobuild/run/instance-0/output/target/bin/sh rm -f /home/buildroot/autobuild/run/instance-0/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/buildroot/autobuild/run/instance-0/output/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-0/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/run/instance-0/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-0/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-0/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/run/instance-0/output/target/usr/include /home/buildroot/autobuild/run/instance-0/output/target/usr/share/aclocal \ /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-0/output/target/usr/share/pkgconfig \ /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-0/output/target/usr/share/cmake find /home/buildroot/autobuild/run/instance-0/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/run/instance-0/output/target/lib/ /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/ /home/buildroot/autobuild/run/instance-0/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/autobuild/run/instance-0/output/target/usr/share/gdb rm -rf /home/buildroot/autobuild/run/instance-0/output/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/run/instance-0/output/target/usr/share/zsh rm -rf /home/buildroot/autobuild/run/instance-0/output/target/usr/man /home/buildroot/autobuild/run/instance-0/output/target/usr/share/man rm -rf /home/buildroot/autobuild/run/instance-0/output/target/usr/info /home/buildroot/autobuild/run/instance-0/output/target/usr/share/info rm -rf /home/buildroot/autobuild/run/instance-0/output/target/usr/doc /home/buildroot/autobuild/run/instance-0/output/target/usr/share/doc rm -rf /home/buildroot/autobuild/run/instance-0/output/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/run/instance-0/output/target/usr/share 2>/dev/null || true find /home/buildroot/autobuild/run/instance-0/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-0/output/host/bin/aarch64_be-linux-gnu-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/run/instance-0/output/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-0/output/host/bin/aarch64_be-linux-gnu-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/run/instance-0/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/run/instance-0/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/run/instance-0/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.05-git-00107-g0843cd1"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2019.05-git"; \ echo "PRETTY_NAME=\"Buildroot 2019.05-git\"" \ ) > /home/buildroot/autobuild/run/instance-0/output/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-0/output/target/etc >>> Sanitizing RPATH in target tree /home/buildroot/autobuild/run/instance-0/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/run/instance-0/output/target/usr make: Leaving directory `/home/buildroot/autobuild/run/instance-0/buildroot' make: Entering directory `/home/buildroot/autobuild/run/instance-0/buildroot' >>> Buildroot 2019.05-git-00107-g0843cd1 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-lzip 1.20 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-linaro-aarch64-be 2018.05 Collecting legal info >>> toolchain Collecting legal info >>> babeld 1.7.1 Collecting legal info ERROR: No hash found for LICENCE >>> busybox 1.29.3 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> dbus 1.12.10 Collecting legal info COPYING: OK (sha256: 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1) >>> expat 2.2.6 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-pkgconf 1.5.3 Collecting legal info ERROR: No hash found for COPYING >>> gettext 0.19.8.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) ERROR: No hash found for gettext-runtime/intl/COPYING.LIB >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) ERROR: No hash found for libltdl/COPYING.LIB >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> initscripts Collecting legal info >>> libeXosip2 3.6.0 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libosip2 3.6.0 Collecting legal info COPYING: OK (sha256: 8d9e95ed0e48df46dc758eb0d86df611f771eab4eed94bebb77dca87f1c897de) >>> libogg 1.3.3 Collecting legal info COPYING: OK (sha256: d2ab5758336489da61c12cc5bb757da5339c4ae9001f9bb0562b4370249af814) >>> libupnp18 1.8.4 Collecting legal info COPYING: OK (sha256: c8b99423cad48bb44e2cf52a496361404290865eac259a82da6d1e4331ececb3) >>> linphone 3.6.1 Collecting legal info ERROR: No hash found for COPYING >>> host-gettext 0.19.8.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) ERROR: No hash found for gettext-runtime/intl/COPYING.LIB >>> host-libxml2 2.9.9 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> host-intltool 0.51.0 Collecting legal info ERROR: No hash found for COPYING >>> host-libxml-parser-perl 2.44 Collecting legal info ERROR: No hash found for README >>> host-expat 2.2.6 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> speex 1.2.0 Collecting legal info COPYING: OK (sha256: 671bb5d8fd3c6b05a2e831d90f978ac27965c92bd8ea6d16b3df76e3440c0e9f) >>> speexdsp 20ed3452074664ad07e380e51321b148acebdf20 Collecting legal info COPYING: OK (sha256: 671bb5d8fd3c6b05a2e831d90f978ac27965c92bd8ea6d16b3df76e3440c0e9f) >>> mp4v2 2.0.0 Collecting legal info ERROR: No hash found for COPYING >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> quagga 1.2.3 Collecting legal info COPYING: OK (sha256: b39c1bad4e51e2a3389cd25fc4addebe41a3ae7c11100795683f9330de1536e5) >>> host-gawk 4.2.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-linaro-aarch64-be-2018.05: cannot save license (TOOLCHAIN_EXTERNAL_LINARO_AARCH64_BE_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/run/instance-0/output/legal-info make: Leaving directory `/home/buildroot/autobuild/run/instance-0/buildroot'