libtool: install: /usr/bin/install -c sg_format /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_lba_status /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_senddiag /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_sync /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_zone /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin/sgp_dd make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/src' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/src' Making install in doc make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/doc' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/doc' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 '/accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/share/man/man8' make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/doc' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/doc' Making install in scripts make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/scripts' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/scripts' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature '/accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot/usr/bin' make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/scripts' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/scripts' make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' make[1]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' >>> sg3_utils 1.42 Fixing libtool files >>> sg3_utils 1.42 Installing to target PATH="/accts/mlweber1/instance-3/output/host/bin:/accts/mlweber1/instance-3/output/host/sbin:/usr/bin:/bin" /usr/bin/make -j32 DESTDIR=/accts/mlweber1/instance-3/output/target install -C /accts/mlweber1/instance-3/output/build/sg3_utils-1.42/ make[1]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' Making install in include make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/include' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/include' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/accts/mlweber1/instance-3/output/target/usr/include/scsi' /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_pt.h sg_linux_inc.h sg_io_linux.h '/accts/mlweber1/instance-3/output/target/usr/include/scsi' make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/include' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/include' Making install in lib make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/lib' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/lib' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/accts/mlweber1/instance-3/output/target/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/accts/mlweber1/instance-3/output/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2.so.2.0.0 /accts/mlweber1/instance-3/output/target/usr/lib/libsgutils2.so.2.0.0 libtool: install: (cd /accts/mlweber1/instance-3/output/target/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so.2 || { rm -f libsgutils2.so.2 && ln -s libsgutils2.so.2.0.0 libsgutils2.so.2; }; }) libtool: install: (cd /accts/mlweber1/instance-3/output/target/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /accts/mlweber1/instance-3/output/target/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/lib' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/lib' Making install in src make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/src' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/src' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/accts/mlweber1/instance-3/output/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/accts/mlweber1/instance-3/output/target/usr/bin' libtool: install: /usr/bin/install -c sg_compare_and_write /accts/mlweber1/instance-3/output/target/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /accts/mlweber1/instance-3/output/target/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /accts/mlweber1/instance-3/output/target/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /accts/mlweber1/instance-3/output/target/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_lba_status /accts/mlweber1/instance-3/output/target/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /accts/mlweber1/instance-3/output/target/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /accts/mlweber1/instance-3/output/target/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /accts/mlweber1/instance-3/output/target/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /accts/mlweber1/instance-3/output/target/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /accts/mlweber1/instance-3/output/target/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /accts/mlweber1/instance-3/output/target/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /accts/mlweber1/instance-3/output/target/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /accts/mlweber1/instance-3/output/target/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /accts/mlweber1/instance-3/output/target/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /accts/mlweber1/instance-3/output/target/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /accts/mlweber1/instance-3/output/target/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /accts/mlweber1/instance-3/output/target/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /accts/mlweber1/instance-3/output/target/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /accts/mlweber1/instance-3/output/target/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /accts/mlweber1/instance-3/output/target/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /accts/mlweber1/instance-3/output/target/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /accts/mlweber1/instance-3/output/target/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /accts/mlweber1/instance-3/output/target/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /accts/mlweber1/instance-3/output/target/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /accts/mlweber1/instance-3/output/target/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /accts/mlweber1/instance-3/output/target/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /accts/mlweber1/instance-3/output/target/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /accts/mlweber1/instance-3/output/target/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /accts/mlweber1/instance-3/output/target/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /accts/mlweber1/instance-3/output/target/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /accts/mlweber1/instance-3/output/target/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /accts/mlweber1/instance-3/output/target/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /accts/mlweber1/instance-3/output/target/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_senddiag /accts/mlweber1/instance-3/output/target/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /accts/mlweber1/instance-3/output/target/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /accts/mlweber1/instance-3/output/target/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /accts/mlweber1/instance-3/output/target/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /accts/mlweber1/instance-3/output/target/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_sync /accts/mlweber1/instance-3/output/target/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /accts/mlweber1/instance-3/output/target/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /accts/mlweber1/instance-3/output/target/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /accts/mlweber1/instance-3/output/target/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /accts/mlweber1/instance-3/output/target/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /accts/mlweber1/instance-3/output/target/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /accts/mlweber1/instance-3/output/target/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /accts/mlweber1/instance-3/output/target/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /accts/mlweber1/instance-3/output/target/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /accts/mlweber1/instance-3/output/target/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /accts/mlweber1/instance-3/output/target/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_zone /accts/mlweber1/instance-3/output/target/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /accts/mlweber1/instance-3/output/target/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /accts/mlweber1/instance-3/output/target/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /accts/mlweber1/instance-3/output/target/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /accts/mlweber1/instance-3/output/target/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /accts/mlweber1/instance-3/output/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /accts/mlweber1/instance-3/output/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /accts/mlweber1/instance-3/output/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /accts/mlweber1/instance-3/output/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /accts/mlweber1/instance-3/output/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /accts/mlweber1/instance-3/output/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /accts/mlweber1/instance-3/output/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /accts/mlweber1/instance-3/output/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /accts/mlweber1/instance-3/output/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /accts/mlweber1/instance-3/output/target/usr/bin/sgp_dd make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/src' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/src' Making install in doc make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/doc' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/doc' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/accts/mlweber1/instance-3/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 '/accts/mlweber1/instance-3/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/accts/mlweber1/instance-3/output/target/usr/share/man/man8' make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/doc' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/doc' Making install in scripts make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/scripts' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/scripts' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/accts/mlweber1/instance-3/output/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature '/accts/mlweber1/instance-3/output/target/usr/bin' make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/scripts' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42/scripts' make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' make[3]: Entering directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' make[1]: Leaving directory `/accts/mlweber1/instance-3/output/build/sg3_utils-1.42' for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /accts/mlweber1/instance-3/output/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /accts/mlweber1/instance-3/output/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /accts/mlweber1/instance-3/output/target/usr/bin/${prog}; done spidev_test.c?id=v4.10: OK (sha256: 3cf76b15d9a8644f3f5cbc0387cc02a7d4a392ade39788cbc6367cce98552e2f) >>> spidev_test v4.10 Extracting cp /accts/mlweber1/instance-3/dl/spidev_test.c?id=v4.10 /accts/mlweber1/instance-3/output/build/spidev_test-v4.10/spidev_test.c >>> spidev_test v4.10 Patching /bin/sed -i -e 's~^#include ~#include \n#include ~' /accts/mlweber1/instance-3/output/build/spidev_test-v4.10/spidev_test.c >>> spidev_test v4.10 Configuring >>> spidev_test v4.10 Building PATH="/accts/mlweber1/instance-3/output/host/bin:/accts/mlweber1/instance-3/output/host/sbin:/usr/bin:/bin" /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o /accts/mlweber1/instance-3/output/build/spidev_test-v4.10/spidev_test /accts/mlweber1/instance-3/output/build/spidev_test-v4.10/spidev_test.c >>> spidev_test v4.10 Installing to target /usr/bin/install -D -m 755 /accts/mlweber1/instance-3/output/build/spidev_test-v4.10/spidev_test /accts/mlweber1/instance-3/output/target/usr/sbin/spidev_test zip30.tgz: OK (sha256: f0e8bb1f9b7eb0b01285495a2699df3a4b766784c1765a8f1aeedf63c0806369) >>> zip 30 Extracting gzip -d -c /accts/mlweber1/instance-3/dl/zip30.tgz | tar --strip-components=1 -C /accts/mlweber1/instance-3/output/build/zip-30 -xf - >>> zip 30 Patching Applying 0001-configure-Remove-Check-C-compiler-type-optimization-.patch using patch: patching file unix/configure Applying 0002-configure-Don-t-use-host-CPP.patch using patch: patching file unix/configure Applying 0003-Makefile-Use-CFLAGS-from-command-line.patch using patch: patching file unix/Makefile Applying 0004-configure-use-LDFLAGS-from-command-line.patch using patch: patching file unix/configure Applying 0005-unix-configure-remove-GID-UID-size-check.patch using patch: patching file unix/configure Applying 0006-unix-configure-borrow-the-LFS-test-from-autotools.patch using patch: patching file unix/configure >>> zip 30 Configuring >>> zip 30 Building PATH="/accts/mlweber1/instance-3/output/host/bin:/accts/mlweber1/instance-3/output/host/sbin:/usr/bin:/bin" /usr/bin/make -j32 PATH="/accts/mlweber1/instance-3/output/host/bin:/accts/mlweber1/instance-3/output/host/sbin:/usr/bin:/bin" AR="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-ar" AS="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-as" LD="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-ld" NM="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-nm" CC="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc" GCC="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc" CPP="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-cpp" CXX="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-g++" FC="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gfortran" F77="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gfortran" RANLIB="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-ranlib" READELF="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-readelf" STRIP="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-strip" OBJCOPY="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-objcopy" OBJDUMP="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/accts/mlweber1/instance-3/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/accts/mlweber1/instance-3/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/accts/mlweber1/instance-3/output/host/include" LDFLAGS_FOR_BUILD="-L/accts/mlweber1/instance-3/output/host/lib -Wl,-rpath,/accts/mlweber1/instance-3/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-as" DEFAULT_LINKER="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/accts/mlweber1/instance-3/output/host/bin/pkg-config" STAGING_DIR="/accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl -C /accts/mlweber1/instance-3/output/build/zip-30 CFLAGS="-D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT" AS="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c" -f unix/Makefile generic make[1]: Entering directory `/accts/mlweber1/instance-3/output/build/zip-30' sh unix/configure "/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc" "-D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT" "" Check bzip2 support Check for bzip2 in bzip2 directory Check if OS already has bzip2 library installed -- Either bzlib.h or libbz2.a not found - no bzip2 Check for the C preprocessor Check if we can use asm code Check for ANSI options Check for prototypes Check the handling of const Check for time_t Check for size_t Check for off_t Check for Large File Support -- yes we have Large File Support! Check for wide char support -- have wchar_t - enabling Unicode support Check for gcc no-builtin flag Check for rmdir Check for strchr Check for strrchr Check for rename Check for mktemp Check for mktime Check for mkstemp Check for memset Check for memmove Check for strerror Check for errno declaration Check for directory libraries Check for readlink Check for directory include file Check for nonexistent include files Check for term I/O include file Check for valloc Check for /usr/local/bin and /usr/local/man Check for OS-specific flags Check for symbolic links eval /usr/bin/make -f unix/Makefile zips `cat flags` make[2]: Entering directory `/accts/mlweber1/instance-3/output/build/zip-30' /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H zip.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H zipfile.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H zipup.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H fileio.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H util.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H globals.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H crypt.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H ttyio.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H unix/unix.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H crc32.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H zbz2err.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H deflate.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H trees.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H zipcloak.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H -DUTIL -o zipfile_.o zipfile.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H -DUTIL -o fileio_.o fileio.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H -DUTIL -o util_.o util.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H -DUTIL -o unix_.o unix/unix.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H -DUTIL -o crc32_.o crc32.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H -DUTIL -o crypt_.o crypt.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H zipnote.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -c -D_FILE_OFFSET_BITS=64 -Os -I. -DUNIX -DUIDGID_NOT_16BIT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DHAVE_DIRENT_H -DHAVE_TERMIOS_H zipsplit.c /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -o zipcloak zipcloak.o zipfile_.o fileio_.o util_.o globals.o unix_.o crc32_.o crypt_.o ttyio.o /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -o zipnote zipnote.o zipfile_.o fileio_.o util_.o globals.o unix_.o crc32_.o /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -o zipsplit zipsplit.o zipfile_.o fileio_.o util_.o globals.o unix_.o crc32_.o /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc -o zip zip.o zipfile.o zipup.o fileio.o util.o globals.o crypt.o ttyio.o unix.o crc32.o zbz2err.o deflate.o trees.o make[2]: Leaving directory `/accts/mlweber1/instance-3/output/build/zip-30' make[1]: Leaving directory `/accts/mlweber1/instance-3/output/build/zip-30' >>> zip 30 Installing to target PATH="/accts/mlweber1/instance-3/output/host/bin:/accts/mlweber1/instance-3/output/host/sbin:/usr/bin:/bin" /usr/bin/make -j32 PATH="/accts/mlweber1/instance-3/output/host/bin:/accts/mlweber1/instance-3/output/host/sbin:/usr/bin:/bin" AR="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-ar" AS="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-as" LD="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-ld" NM="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-nm" CC="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc" GCC="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gcc" CPP="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-cpp" CXX="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-g++" FC="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gfortran" F77="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-gfortran" RANLIB="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-ranlib" READELF="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-readelf" STRIP="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-strip" OBJCOPY="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-objcopy" OBJDUMP="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/accts/mlweber1/instance-3/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/accts/mlweber1/instance-3/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/accts/mlweber1/instance-3/output/host/include" LDFLAGS_FOR_BUILD="-L/accts/mlweber1/instance-3/output/host/lib -Wl,-rpath,/accts/mlweber1/instance-3/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-as" DEFAULT_LINKER="/accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/accts/mlweber1/instance-3/output/host/bin/pkg-config" STAGING_DIR="/accts/mlweber1/instance-3/output/host/powerpc64-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl -C /accts/mlweber1/instance-3/output/build/zip-30 -f unix/Makefile install prefix=/accts/mlweber1/instance-3/output/target/usr make[1]: Entering directory `/accts/mlweber1/instance-3/output/build/zip-30' mkdir -p /accts/mlweber1/instance-3/output/target/usr/bin cp zip zipcloak zipnote zipsplit /accts/mlweber1/instance-3/output/target/usr/bin cd /accts/mlweber1/instance-3/output/target/usr/bin; chmod 755 zip zipcloak zipnote zipsplit mkdir -p /accts/mlweber1/instance-3/output/target/usr/man/man1 cp man/zip.1 /accts/mlweber1/instance-3/output/target/usr/man/man1/zip.1 chmod 644 /accts/mlweber1/instance-3/output/target/usr/man/man1/zip.1 cp man/zipcloak.1 /accts/mlweber1/instance-3/output/target/usr/man/man1/zipcloak.1 chmod 644 /accts/mlweber1/instance-3/output/target/usr/man/man1/zipcloak.1 cp man/zipnote.1 /accts/mlweber1/instance-3/output/target/usr/man/man1/zipnote.1 chmod 644 /accts/mlweber1/instance-3/output/target/usr/man/man1/zipnote.1 cp man/zipsplit.1 /accts/mlweber1/instance-3/output/target/usr/man/man1/zipsplit.1 chmod 644 /accts/mlweber1/instance-3/output/target/usr/man/man1/zipsplit.1 make[1]: Leaving directory `/accts/mlweber1/instance-3/output/build/zip-30' >>> Finalizing target directory /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /accts/mlweber1/instance-3/output/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /accts/mlweber1/instance-3/output/target/etc/inittab PYTHONPATH="/accts/mlweber1/instance-3/output/target/usr/lib/python3.6/" cd /accts/mlweber1/instance-3/output/target && /accts/mlweber1/instance-3/output/host/bin/python3.6 /accts/mlweber1/instance-3/buildroot/support/scripts/pycompile.py usr/lib/python3.6 find /accts/mlweber1/instance-3/output/target/usr/lib/python3.6 -name '*.py' -print0 | xargs -0 --no-run-if-empty rm -f find /accts/mlweber1/instance-3/output/target/usr/lib/python3.6 -name '*.opt-1.pyc' -print0 -o -name '*.opt-2.pyc' -print0 | xargs -0 --no-run-if-empty rm -f mkdir -p /accts/mlweber1/instance-3/output/target/etc echo "buildroot" > /accts/mlweber1/instance-3/output/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /accts/mlweber1/instance-3/output/target/etc/hosts mkdir -p /accts/mlweber1/instance-3/output/target/etc echo "Welcome to Buildroot" > /accts/mlweber1/instance-3/output/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /accts/mlweber1/instance-3/output/target/etc/shadow rm -f /accts/mlweber1/instance-3/output/target/bin/sh rm -f /accts/mlweber1/instance-3/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /accts/mlweber1/instance-3/output/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /accts/mlweber1/instance-3/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /accts/mlweber1/instance-3/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /accts/mlweber1/instance-3/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /accts/mlweber1/instance-3/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /accts/mlweber1/instance-3/output/target/usr/include /accts/mlweber1/instance-3/output/target/usr/share/aclocal \ /accts/mlweber1/instance-3/output/target/usr/lib/pkgconfig /accts/mlweber1/instance-3/output/target/usr/share/pkgconfig \ /accts/mlweber1/instance-3/output/target/usr/lib/cmake /accts/mlweber1/instance-3/output/target/usr/share/cmake find /accts/mlweber1/instance-3/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /accts/mlweber1/instance-3/output/target/lib/ /accts/mlweber1/instance-3/output/target/usr/lib/ /accts/mlweber1/instance-3/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: `/accts/mlweber1/instance-3/output/target/usr/libexec/': No such file or directory rm -rf /accts/mlweber1/instance-3/output/target/usr/share/gdb rm -rf /accts/mlweber1/instance-3/output/target/usr/share/bash-completion rm -rf /accts/mlweber1/instance-3/output/target/usr/share/zsh rm -rf /accts/mlweber1/instance-3/output/target/usr/man /accts/mlweber1/instance-3/output/target/usr/share/man rm -rf /accts/mlweber1/instance-3/output/target/usr/info /accts/mlweber1/instance-3/output/target/usr/share/info rm -rf /accts/mlweber1/instance-3/output/target/usr/doc /accts/mlweber1/instance-3/output/target/usr/share/doc rm -rf /accts/mlweber1/instance-3/output/target/usr/share/gtk-doc rmdir /accts/mlweber1/instance-3/output/target/usr/share 2>/dev/null || true find /accts/mlweber1/instance-3/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /accts/mlweber1/instance-3/output/target/lib/ -type f -name 'libpthread*.so*' | \ xargs -r /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-strip --remove-section=.comment --remove-section=.note --strip-debug find /accts/mlweber1/instance-3/output/target/lib/ -type f -name 'ld-*.so*' | \ xargs -r /accts/mlweber1/instance-3/output/host/bin/powerpc64-linux-strip --remove-section=.comment --remove-section=.note --strip-debug test -f /accts/mlweber1/instance-3/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /accts/mlweber1/instance-3/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /accts/mlweber1/instance-3/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2017.11-rc2-00035-g1a515b5"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2017.11-rc2"; \ echo "PRETTY_NAME=\"Buildroot 2017.11-rc2\"" \ ) > /accts/mlweber1/instance-3/output/target/etc/os-release >>> Sanitizing RPATH in target tree /accts/mlweber1/instance-3/buildroot/support/scripts/fix-rpath target make: Leaving directory `/accts/mlweber1/instance-3/buildroot' make: Entering directory `/accts/mlweber1/instance-3/buildroot' >>> Buildroot 2017.11-rc2-00035-g1a515b5 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> apache 2.4.29 Collecting legal info ERROR: No hash found for LICENSE >>> apr 1.6.3 Collecting legal info LICENSE: OK (sha256: f854aeef66ecd55a126226e82b3f26793fc3b1c584647f6a0edc5639974c38ad) >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> apr-util 1.6.1 Collecting legal info LICENSE: OK (sha256: ef5609d18601645ad6fe22c6c122094be40e976725c1d0490778abacc836e7a2) >>> expat 2.2.4 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-pkgconf 0.9.12 Collecting legal info ERROR: No hash found for COPYING >>> openssl Collecting legal info >>> libopenssl 1.0.2m Collecting legal info ERROR: No hash found for LICENSE >>> zlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> libxml2 2.9.5 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> pcre 8.41 Collecting legal info LICENCE: OK (sha256: 9ac4dfc82b2645ff77b56b759f95f28aa15ab15a03670fa6d4313a6b351e60f0) >>> busybox 1.27.2 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> libtirpc 1.0.2 Collecting legal info ERROR: No hash found for COPYING >>> ca-certificates 20161130 Collecting legal info ERROR: No hash found for debian/copyright >>> host-openssl Collecting legal info >>> host-libopenssl 1.0.2m Collecting legal info ERROR: No hash found for LICENSE >>> host-zlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-python3 3.6.3 Collecting legal info ERROR: No hash found for LICENSE >>> host-expat 2.2.4 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> check 0.11.0 Collecting legal info COPYING.LESSER: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> flickcurl 1.26 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING.LIB ERROR: No hash found for LICENSE-2.0.txt ERROR: No hash found for LICENSE.html >>> libcurl 7.56.1 Collecting legal info COPYING: OK (sha256: cbcf511f5702f7baf5424193a792bc9c18fab22bcbec2e6a587598389dc632c2) >>> ibrcommon 1.0.1 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for README >>> initscripts Collecting legal info >>> libcuefile r475 Collecting legal info ERROR: No hash found for COPYING >>> host-cmake 3.8.2 Collecting legal info ERROR: No hash found for Copyright.txt >>> libffi 3.2.1 Collecting legal info LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5) >>> libg7221 dbfc29d4806ecdace50379a2f4d68a992a6fec34 Collecting legal info ERROR: No hash found for COPYING >>> libhttpparser v2.7.1 Collecting legal info ERROR: No hash found for LICENSE-MIT >>> libid3tag 0.15.1b Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYRIGHT >>> libmad 0.15.1b Collecting legal info ERROR: No hash found for COPYING >>> libreplaygain r475 Collecting legal info ERROR: No hash found for src/gain_analysis.c >>> madplay 0.15.2b Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYRIGHT >>> mongodb r3.3.4 Collecting legal info ERROR: No hash found for GNU-AGPL-3.0.txt ERROR: No hash found for APACHE-2.0.txt >>> host-scons 2.5.1 Collecting legal info ERROR: No hash found for LICENSE.txt >>> host-python 2.7.14 Collecting legal info LICENSE: OK (sha256: d2d17b17388da74dc9c6bdbf78eb7237432c3f8a0c87852df740ec99de2ec680) >>> musepack r475 Collecting legal info ERROR: No hash found for libmpcdec/COPYING ERROR: No hash found for libmpcenc/quant.c >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> python-couchdb 1.1 Collecting legal info ERROR: No hash found for COPYING >>> host-python-setuptools v36.0.1 Collecting legal info ERROR: No hash found for LICENSE >>> python3 3.6.3 Collecting legal info ERROR: No hash found for LICENSE >>> selinux-python 2.7 Collecting legal info ERROR: No hash found for COPYING >>> sg3_utils 1.42 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for BSD_LICENSE >>> spidev_test v4.10 Collecting legal info >>> zip 30 Collecting legal info ERROR: No hash found for LICENSE WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) WARNING: spidev_test-v4.10: cannot save license (SPIDEV_TEST_LICENSE_FILES not defined) Legal info produced in /accts/mlweber1/instance-3/output/legal-info make: Leaving directory `/accts/mlweber1/instance-3/buildroot'