checking the name of 'tickadj' in the kernel... _tickadj checking for the units of 'tickadj'... usec checking half-heartedly for 'dosynctodr' in the kernel... _dosynctodr checking half-heartedly for 'noprintf' in the kernel... _noprintf checking for a default value for 'tick'... txc.tick checking for a default value for 'tickadj'... no configure: WARNING: Can't read kmem but no PRESET_TICK. No tickadj. checking if we want and can make the ntptime utility... yes checking if we want and can make the tickadj utility... yes checking if we want and can make the timetrim utility... no checking if we want to build the NTPD simulator... no checking if sntp will be built... no checking if we want to build ntpsnmpd... no checking if we should always slew the time... no checking if we should step and slew the time... no checking if ntpdate should step the time... no checking if we should sync TODR clock every hour... no checking if we should avoid kernel FLL bug... no checking if we want new session key behavior... yes checking if we want the explicit 127.0.0.0/8 martian filter... yes checking if we want correct mode7 fudgetime2 behavior... yes checking if we should use the IRIG sawtooth filter... no checking if we should enable NIST lockclock scheme... no checking if we want support for Samba's signing daemon... no checking for libscf.h... no checking for struct sockaddr_storage... yes checking for sockaddr_storage.__ss_family... no checking for in_port_t... yes checking type of socklen arg for getsockname()... socklen_t checking struct sockaddr for sa_len... no checking for IPv6 structures... yes checking for Kame IPv6 support... no checking for in6_pktinfo... yes checking for sockaddr_in6.sin6_scope_id... yes checking for in6addr_any... yes checking for struct if_laddrconf... no checking for struct if_laddrreq... no checking for multicast IP support... yes checking arg type needed for setsockopt() IP*_MULTICAST_LOOP... u_int checking for getifaddrs... yes checking for if_nametoindex... yes checking for interface list sysctl... no checking if we want the saveconfig mechanism... yes checking if we want the experimental leap smear code... no checking if we want dynamic interleave support... no checking for ruby... /usr/bin/ruby checking for gtest-config... no checking if we want to enable tests with undiagnosed problems... yes checking if we can run test-ntp_restrict... no checking if we can run test-ntp_scanner... no checking if we can run test-ntp_signd... no checking whether sigsetjmp is declared... yes checking whether siglongjmp is declared... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating adjtimed/Makefile config.status: creating clockstuff/Makefile config.status: creating include/Makefile config.status: creating include/isc/Makefile config.status: creating kernel/Makefile config.status: creating kernel/sys/Makefile config.status: creating libntp/Makefile config.status: creating libparse/Makefile config.status: creating ntpd/Makefile config.status: creating ntpd/complete.conf config.status: creating ntpdate/Makefile config.status: creating ntpdc/Makefile config.status: creating ntpdc/nl.pl config.status: creating ntpq/Makefile config.status: creating ntpsnmpd/Makefile config.status: creating parseutil/Makefile config.status: creating scripts/Makefile config.status: creating scripts/build/Makefile config.status: creating scripts/build/genAuthors config.status: creating scripts/build/mkver config.status: creating scripts/calc_tickadj/Makefile config.status: creating scripts/calc_tickadj/calc_tickadj config.status: creating scripts/lib/Makefile config.status: creating scripts/ntp-wait/Makefile config.status: creating scripts/ntp-wait/ntp-wait config.status: creating scripts/ntpsweep/Makefile config.status: creating scripts/ntpsweep/ntpsweep config.status: creating scripts/ntptrace/Makefile config.status: creating scripts/ntptrace/ntptrace config.status: creating scripts/ntpver config.status: creating scripts/plot_summary config.status: creating scripts/summary config.status: creating scripts/update-leap/Makefile config.status: creating scripts/update-leap/update-leap config.status: creating tests/Makefile config.status: creating tests/bug-2803/Makefile config.status: creating tests/libntp/Makefile config.status: creating tests/ntpd/Makefile config.status: creating tests/ntpq/Makefile config.status: creating tests/sandbox/Makefile config.status: creating tests/sec-2853/Makefile config.status: creating util/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands === configuring in sntp (/home/thomas/autobuild/instance-3/output-1/build/ntp-4.2.8p15/sntp) configure: running /bin/bash ./configure --disable-option-checking '--prefix=/usr' '--target=arc-buildroot-linux-uclibc' '--host=arc-buildroot-linux-uclibc' '--build=x86_64-pc-linux-gnu' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--enable-static' '--enable-shared' '--with-shared' '--program-transform-name=s,,,' '--disable-tickadj' '--disable-debugging' '--with-yielding-select=yes' '--disable-local-libevent' '--with-crypto' '--enable-openssl-random' '--with-hardenfile=linux' '--enable-linuxcaps' '--with-lineeditlibs=edit' '--without-ntpsnmpd' '--disable-ATOM' '--enable-SHM' '--without-sntp' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=arc-buildroot-linux-uclibc' 'target_alias=arc-buildroot-linux-uclibc' 'CC=/home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 ' 'LDFLAGS=' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'CPP=/home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-cpp' --cache-file=/dev/null --srcdir=. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arc-buildroot-linux-uclibc-strip... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-strip checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... arc-buildroot-linux-uclibc checking whether make supports the include directive... yes (GNU style) checking for arc-buildroot-linux-uclibc-cc... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc accepts -g... yes checking for /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc option to enable C11 features... none needed checking whether /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc understands -c and -o together... yes checking dependency style of /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking for vfork.h... no checking for sys/time.h... yes checking for stdarg.h... yes checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking how to run the C preprocessor... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-cpp checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking whether /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc needs -traditional... no checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc can handle #warning... yes checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc supports __attribute__((...))... yes checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc can handle -Wstrict-overflow... yes checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc can handle -Winit-self... yes checking if linker supports omitting unused code and data... no checking additional compiler flags... none needed checking additional linker flags... none needed checking whether byte ordering is bigendian... (cached) no checking for working volatile... yes checking how to run the C preprocessor... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-cpp checking for compile/link hardening flags... in file harden/linux checking for install dir and man conventions... in file loc/legacy checking for arc-buildroot-linux-uclibc-ar... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc-ar checking the archiver (/home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc-ar) interface... ar checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking how to print strings... printf checking for pid_t... yes checking for fork... yes checking for vfork... yes checking for vprintf... yes checking for size_t... yes checking for /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc options needed to detect all undeclared functions... none needed checking whether strerror_r is declared... yes checking for unsigned long long int... yes checking for vsnprintf... yes checking whether vsnprintf is C99 compliant... no checking if C99-snprintf replacement vsnprintf will be used... yes checking for inttypes.h... (cached) yes checking for locale.h... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for struct lconv.decimal_point... yes checking for struct lconv.thousands_sep... yes checking for long double... yes checking for long long int... yes checking for unsigned long long int... (cached) yes checking for size_t... (cached) yes checking for intmax_t... yes checking for uintmax_t... yes checking for uintptr_t... yes checking for ptrdiff_t... yes checking for localeconv... yes checking for an ANSI C-conforming const... yes checking for snprintf... yes checking whether snprintf is C99 compliant... no checking if C99-snprintf replacement snprintf will be used... yes checking for ld used by /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-ld checking if the linker (/home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-ld) is GNU ld... yes checking for directory path separator... '/' checking line editing libraries... edit checking for readline() with -ledit... yes checking for readline.h... no checking for readline/readline.h... no checking for histedit.h... yes checking for history.h... no checking for readline/history.h... no checking number of arguments to el_init()... 4 checking whether readline supports history... yes checking for library containing cos... none required checking for working fork... cross configure: WARNING: result yes guessed because of cross compilation checking for working vfork... (cached) yes checking for working alloca.h... yes checking for alloca... yes checking whether strerror_r returns char *... yes checking for library containing clock_gettime... none required checking for clock_getres... yes checking for clock_gettime... yes checking for clock_settime... yes checking for getclock... no checking for stime... yes checking for timegm... yes checking for strlcpy... yes checking for strlcat... yes checking for library containing snprintb... no checking for errno.h... yes checking for sys/socket.h... yes checking for sys/types.h... (cached) yes checking for time.h... yes checking for net/if.h... yes checking for linux/if_addr.h... yes checking for arpa/nameser.h... yes checking for sys/param.h... yes checking for sys/time.h... (cached) yes checking for sys/timers.h... no checking for sys/sysctl.h... yes checking for netinet/in_system.h... no checking for netinet/in_systm.h... yes checking for netinet/in.h... yes checking for resolv.h... yes checking for net/if_var.h... no checking for netinet/ip.h... yes checking for netinet/in_var.h... no checking for library containing inet_pton... none required checking for library containing inet_ntop... none required checking for library containing setsockopt... none required checking for recvmsg... yes checking for inline... inline checking size of time_t... 4 checking whether char is unsigned... yes checking size of signed char... 1 checking for s_char... no checking for long long... yes checking size of short... 2 checking size of int... 4 checking size of long... 4 checking size of long long... 8 checking for uid_t in sys/types.h... yes checking if we're including debugging code... no checking for semaphore.h... yes checking for socketpair... yes checking for _beginthread... no checking for pthread.h... yes checking POSIX thread version... 10 checking for LinuxThreads pthread.h... no checking for GNU Pth pthread.h... no checking for sched.h... yes checking for pthread_create in default libraries... yes configure: ol_link_threads: ol_link_pthreads <> checking for sched_yield... yes checking for pthread_yield... yes checking for thr_yield... no checking for pthread_kill... yes checking for pthread_rwlock_destroy with ... yes checking for pthread_detach with ... yes checking for pthread_setconcurrency... yes checking for pthread_getconcurrency... yes checking for thr_setconcurrency... no checking for thr_getconcurrency... no checking for pthread_kill_other_threads_np... no checking for LinuxThreads implementation... no checking for LinuxThreads consistency... no checking if pthread_create() works... yes checking for thread specific errno... yes checking for thread specific h_errno... yes checking for sem_timedwait... yes checking size of pthread_t... 4 checking for sigwait... yes checking for pthread_attr_getstacksize... yes checking for pthread_attr_setstacksize... yes checking for sysconf... yes checking for sys/clockctl.h... no checking if we should use /dev/clockctl... no checking for sys/capability.h... yes checking for sys/prctl.h... yes checking if we have linux capabilities (libcap)... yes checking for priv.h... no checking if we have solaris privileges... no checking for sys/mac.h... no checking if we should use TrustedBSD MAC privileges... no checking for library containing res_init... no checking for sys/types.h... (cached) yes checking for netinet/in.h... (cached) yes checking for arpa/nameser.h... (cached) yes checking for netdb.h... yes checking for resolv.h... (cached) yes checking for res_init... no checking for __res_init... yes checking for inet_ntop... yes checking for inet_pton... yes checking for uintptr_t... (cached) yes checking for int32... no checking for u_int32... no checking for int32 with DNS headers included... no checking for u_int32 with DNS headers included... no checking for sys/timepps.h... no checking for struct timespec... yes checking for struct ntptimeval... yes checking for md5.h... no checking for library containing MD5Init... no checking for MD5Init... no checking for sysconf... (cached) yes checking for getdtablesize... yes checking for sigaction... yes checking for sigset... yes checking for sigvec... no checking for SIGIO... yes checking if we want to use SIGIO... Possible for arc-buildroot-linux-uclibc but disabled because of reported problems checking for SIGPOLL... yes checking if we can use SIGPOLL for UDP I/O... no checking if we can use SIGPOLL for TTY I/O... no checking number of arguments to gettimeofday()... 2 checking for settimeofday... yes checking if we'll use clock_settime or settimeofday or stime... clock_settime() checking for BSD- or MS-compatible name lister (nm)... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc-nm checking the name lister (/home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arc-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-ld option to reload object files... -r checking for arc-buildroot-linux-uclibc-objdump... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-objdump checking how to recognize dependent libraries... pass_all checking for arc-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arc-buildroot-linux-uclibc-ar... (cached) /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc-ar checking for archiver @FILE support... @ checking for arc-buildroot-linux-uclibc-strip... (cached) /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-strip checking for arc-buildroot-linux-uclibc-ranlib... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc-ranlib checking command to parse /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc-nm output from /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for arc-buildroot-linux-uclibc-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no checking for /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc static flag -static works... yes checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc supports -c -o file.o... yes checking if /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes checking whether the /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-gcc linker (/home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/arc-buildroot-linux-uclibc-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking if sntp will be built... no checking for egrep... (cached) /usr/bin/grep -E checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for sys/mman.h... yes checking for sys/param.h... (cached) yes checking for sys/poll.h... yes checking for sys/procset.h... no checking for sys/select.h... yes checking for sys/socket.h... (cached) yes checking for sys/stropts.h... no checking for sys/time.h... (cached) yes checking for sys/un.h... yes checking for sys/wait.h... yes checking for dlfcn.h... (cached) yes checking for errno.h... (cached) yes checking for fcntl.h... yes checking for libgen.h... yes checking for libintl.h... yes checking for memory.h... yes checking for netinet/in.h... (cached) yes checking for setjmp.h... yes checking for stdbool.h... yes checking for sysexits.h... yes checking for unistd.h... (cached) yes checking for utime.h... yes checking for stdarg.h... (cached) yes checking for string.h... (cached) yes checking for limits.h... yes checking for inttypes.h... (cached) yes checking for working stdnoreturn.h... yes checking for runetype.h... no checking for wchar.h... (cached) yes checking for wchar_t... yes checking for wint_t... yes checking for int8_t... yes checking for uint8_t... yes checking for int16_t... yes checking for uint16_t... yes checking for int32_t... yes checking for uint32_t... yes checking for intptr_t... yes checking for uintptr_t... (cached) yes checking for uint_t... no checking for pid_t... (cached) yes checking for size_t... (cached) yes checking for ptrdiff_t... (cached) yes checking size of char *... 4 checking size of int... (cached) 4 checking size of long... (cached) 4 checking size of short... (cached) 2 checking for pathfind in -lgen... no checking for gettext in -lintl... yes checking for working fork... (cached) yes checking for working vfork... (cached) yes checking for mmap... yes checking for canonicalize_file_name... yes checking for snprintf... (cached) yes checking for strdup... yes checking for strchr... yes checking for strrchr... yes checking for strsignal... yes checking for fchmod... yes checking for fstat... yes checking for chmod... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed configure: Using supplied libopts tearoff checking whether a reg expr header is specified... no checking whether with-libregex was specified... no checking whether with-libregex-cflags was specified... no checking whether with-libregex-libs was specified... no checking whether libregex functions properly... no checking whether pathfind(3) works... no checking whether /dev/zero is readable device... crw-rw-rw- 1 root root 1, 5 Jan 27 23:26 /dev/zero checking whether we have a functional realpath(3C)... no checking whether strftime() works... no checking whether fopen accepts "b" mode... no checking whether fopen accepts "t" mode... no checking whether not wanting optional option args... yes checking for arc-buildroot-linux-uclibc-pkg-config... /home/thomas/autobuild/instance-3/output-1/per-package/ntp/host/bin/pkg-config checking if pkg-config is at least version 0.15.0... yes checking if libevent 2 or later is installed... yes, version 2.1.12-stable checking for library containing openlog... none required checking for netdb.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for syslog.h... yes checking for sysexits.h... (cached) yes checking for facilitynames in syslog.h... yes checking for _Bool... yes checking for stdbool.h that conforms to C99... (cached) yes checking pkg-config for openssl... yes, version 1.1.1t checking if we will use crypto... yes checking for openssl/cmac.h... yes checking for openssl/hmac.h... yes checking for EVP_MD_do_all_sorted... yes checking for struct sockaddr_storage... yes checking for sockaddr_storage.__ss_family... no checking for in_port_t... yes checking type of socklen arg for getsockname()... socklen_t checking struct sockaddr for sa_len... no checking for IPv6 structures... yes checking for Kame IPv6 support... no checking for in6_pktinfo... yes checking for sockaddr_in6.sin6_scope_id... yes checking for in6addr_any... yes checking for struct if_laddrconf... no checking for struct if_laddrreq... no checking for multicast IP support... yes checking arg type needed for setsockopt() IP*_MULTICAST_LOOP... u_int checking for getifaddrs... yes checking for if_nametoindex... yes checking for socket... yes checking for ruby... /usr/bin/ruby checking if we want to enable tests with undiagnosed problems... yes checking if we can run test-kodDatabase... yes checking if we can run test-kodFile... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libopts/Makefile config.status: creating Makefile config.status: creating include/Makefile config.status: creating scripts/Makefile config.status: creating tests/Makefile config.status: creating tests/fileHandlingTest.h config.status: creating unity/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands make: Leaving directory '/home/thomas/autobuild/instance-3/buildroot'