libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/src' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/src' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/doc' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_pip.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/doc' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/scripts' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/scripts' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47/scripts' make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47' make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/sg3_utils-1.47' for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/${prog}; done x265_3.5.tar.gz: OK (md5: deb5df5cb2ec17bdbae6ac6bbc3b1eef) x265_3.5.tar.gz: OK (sha256: e70a3335cacacbba0b3a20ec6fecd6783932288ebc8163ad74bcc9606477cae8) >>> x265 3.5 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-3/dl/x265/x265_3.5.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5 -xf - >>> x265 3.5 Patching Applying 0001-fix-gcc-options.patch using patch: patching file source/CMakeLists.txt patching file source/dynamicHDR10/CMakeLists.txt >>> x265 3.5 Configuring (mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source && cd /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source && rm -f CMakeCache.txt && PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /home/buildroot/autobuild/run/instance-3/output-1/host/bin/cmake /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source -DCMAKE_TOOLCHAIN_FILE="/home/buildroot/autobuild/run/instance-3/output-1/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_INSTALL_RUNSTATEDIR="/run" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON -DENABLE_SHARED=ON -DENABLE_PIC=ON -DENABLE_CLI=OFF ) -- cmake version 3.22.3 CMake Deprecation Warning at CMakeLists.txt:10 (cmake_policy): The OLD behavior for policy CMP0025 will be removed from a future version of CMake. The cmake-policies(7) manual explains that the OLD behaviors of all policies are deprecated and that a policy should be set to OLD only under specific short-term circumstances. Projects should be ported to the NEW behavior and not rely on setting a policy to OLD. CMake Deprecation Warning at CMakeLists.txt:16 (cmake_policy): The OLD behavior for policy CMP0054 will be removed from a future version of CMake. The cmake-policies(7) manual explains that the OLD behaviors of all policies are deprecated and that a policy should be set to OLD only under specific short-term circumstances. Projects should be ported to the NEW behavior and not rely on setting a policy to OLD. -- The C compiler identification is GNU 11.3.0 -- The CXX compiler identification is GNU 11.3.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-gcc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-g++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done CMake Deprecation Warning at CMakeLists.txt:20 (cmake_minimum_required): Compatibility with CMake < 2.8.12 will be removed from a future version of CMake. Update the VERSION argument value or use a ... suffix to tell CMake that the project does not need compatibility with older versions. -- CMAKE_SYSTEM_PROCESSOR value `riscv64` is unknown -- Please add this value near /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/CMakeLists.txt:84 CMake Warning (dev) at /home/buildroot/autobuild/run/instance-3/output-1/host/share/cmake-3.22/Modules/FindPackageHandleStandardArgs.cmake:438 (message): The package name passed to `find_package_handle_standard_args` (NUMA) does not match the name of the calling package (Numa). This can lead to problems in calling code that expects `find_package` result variables (e.g., `_FOUND`) to follow a certain pattern. Call Stack (most recent call first): cmake/FindNuma.cmake:43 (find_package_handle_standard_args) CMakeLists.txt:100 (find_package) This warning is for project developers. Use -Wno-dev to suppress it. -- Could NOT find NUMA (missing: NUMA_ROOT_DIR NUMA_INCLUDE_DIR NUMA_LIBRARY) -- Looking for include file inttypes.h -- Looking for include file inttypes.h - found -- Performing Test CC_HAS_NO_STRICT_OVERFLOW -- Performing Test CC_HAS_NO_STRICT_OVERFLOW - Success -- Performing Test CC_HAS_NO_NARROWING -- Performing Test CC_HAS_NO_NARROWING - Success -- Performing Test CC_HAS_NO_ARRAY_BOUNDS -- Performing Test CC_HAS_NO_ARRAY_BOUNDS - Success -- Performing Test CC_HAS_FAST_MATH -- Performing Test CC_HAS_FAST_MATH - Success -- Performing Test CC_HAS_STACK_REALIGN -- Performing Test CC_HAS_STACK_REALIGN - Failed -- Performing Test CC_HAS_FNO_EXCEPTIONS_FLAG -- Performing Test CC_HAS_FNO_EXCEPTIONS_FLAG - Success CMake Warning (dev) at /home/buildroot/autobuild/run/instance-3/output-1/host/share/cmake-3.22/Modules/FindPackageHandleStandardArgs.cmake:438 (message): The package name passed to `find_package_handle_standard_args` (nasm) does not match the name of the calling package (Nasm). This can lead to problems in calling code that expects `find_package` result variables (e.g., `_FOUND`) to follow a certain pattern. Call Stack (most recent call first): cmake/FindNasm.cmake:23 (find_package_handle_standard_args) CMakeLists.txt:348 (find_package) This warning is for project developers. Use -Wno-dev to suppress it. -- Could NOT find nasm (missing: NASM_EXECUTABLE) -- GIT_EXECUTABLE /usr/bin/git -- SOURCE CODE IS FROM x265 GIT ARCHIVED ZIP OR TAR BALL -- GIT ARCHIVAL INFORMATION PROCESSED -- X265 RELEASE VERSION 3.5+1-f0c1022b6 -- Looking for strtok_r -- Looking for strtok_r - found -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS CMAKE_INSTALL_RUNSTATEDIR -- Build files have been written to: /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source >>> x265 3.5 Building PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' [ 1%] Building CXX object common/CMakeFiles/common.dir/dct.cpp.o [ 3%] Building CXX object encoder/CMakeFiles/encoder.dir/analysis.cpp.o [ 5%] Building CXX object common/CMakeFiles/common.dir/pixel.cpp.o [ 7%] Building CXX object common/CMakeFiles/common.dir/primitives.cpp.o [ 9%] Building CXX object common/CMakeFiles/common.dir/lowpassdct.cpp.o [ 11%] Building CXX object common/CMakeFiles/common.dir/ipfilter.cpp.o [ 13%] Building CXX object common/CMakeFiles/common.dir/intrapred.cpp.o [ 15%] Building CXX object common/CMakeFiles/common.dir/loopfilter.cpp.o [ 17%] Building CXX object common/CMakeFiles/common.dir/constants.cpp.o [ 19%] Building CXX object common/CMakeFiles/common.dir/cpu.cpp.o /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/common/cpu.cpp: In function 'uint32_t x265::cpu_detect(bool)': /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/common/cpu.cpp:391:26: warning: unused parameter 'benableavx512' [-Wunused-parameter] 391 | uint32_t cpu_detect(bool benableavx512) | ~~~~~^~~~~~~~~~~~~ /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/common/cpu.cpp: At global scope: /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/common/cpu.cpp:63:13: warning: 'x265::enable512' defined but not used [-Wunused-variable] 63 | static bool enable512 = false; | ^~~~~~~~~ [ 21%] Building CXX object common/CMakeFiles/common.dir/version.cpp.o [ 23%] Building CXX object common/CMakeFiles/common.dir/threading.cpp.o [ 25%] Building CXX object encoder/CMakeFiles/encoder.dir/search.cpp.o [ 27%] Building CXX object encoder/CMakeFiles/encoder.dir/bitcost.cpp.o [ 29%] Building CXX object encoder/CMakeFiles/encoder.dir/motion.cpp.o [ 31%] Building CXX object common/CMakeFiles/common.dir/threadpool.cpp.o [ 33%] Building CXX object encoder/CMakeFiles/encoder.dir/slicetype.cpp.o [ 35%] Building CXX object common/CMakeFiles/common.dir/wavefront.cpp.o [ 37%] Building CXX object encoder/CMakeFiles/encoder.dir/frameencoder.cpp.o [ 39%] Building CXX object common/CMakeFiles/common.dir/md5.cpp.o [ 41%] Building CXX object common/CMakeFiles/common.dir/bitstream.cpp.o [ 43%] Building CXX object common/CMakeFiles/common.dir/yuv.cpp.o [ 45%] Building CXX object common/CMakeFiles/common.dir/shortyuv.cpp.o [ 47%] Building CXX object common/CMakeFiles/common.dir/picyuv.cpp.o [ 49%] Building CXX object common/CMakeFiles/common.dir/common.cpp.o [ 50%] Building CXX object encoder/CMakeFiles/encoder.dir/framefilter.cpp.o [ 52%] Building CXX object encoder/CMakeFiles/encoder.dir/level.cpp.o [ 54%] Building CXX object common/CMakeFiles/common.dir/param.cpp.o [ 56%] Building CXX object encoder/CMakeFiles/encoder.dir/nal.cpp.o [ 58%] Building CXX object encoder/CMakeFiles/encoder.dir/sei.cpp.o [ 60%] Building CXX object encoder/CMakeFiles/encoder.dir/sao.cpp.o [ 62%] Building CXX object encoder/CMakeFiles/encoder.dir/entropy.cpp.o [ 64%] Building CXX object encoder/CMakeFiles/encoder.dir/dpb.cpp.o [ 66%] Building CXX object common/CMakeFiles/common.dir/frame.cpp.o [ 68%] Building CXX object encoder/CMakeFiles/encoder.dir/ratecontrol.cpp.o [ 70%] Building CXX object common/CMakeFiles/common.dir/framedata.cpp.o [ 72%] Building CXX object encoder/CMakeFiles/encoder.dir/reference.cpp.o [ 74%] Building CXX object common/CMakeFiles/common.dir/cudata.cpp.o [ 76%] Building CXX object common/CMakeFiles/common.dir/slice.cpp.o [ 78%] Building CXX object encoder/CMakeFiles/encoder.dir/encoder.cpp.o [ 80%] Building CXX object common/CMakeFiles/common.dir/lowres.cpp.o [ 82%] Building CXX object common/CMakeFiles/common.dir/piclist.cpp.o [ 84%] Building CXX object common/CMakeFiles/common.dir/predict.cpp.o /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp: In member function 'int x265::RateControl::writeRateControlFrameStats(x265::Frame*, x265::RateControlEntry*)': /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp:3025:36: warning: '~' directive writing 1 byte into a region of size between 0 and 127 [-Wformat-overflow=] 3025 | sprintf(deltaPOC, "%s%d~", deltaPOC, rpsWriter->deltaPOC[i]); | ^ /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp:3025:20: note: 'sprintf' output between 3 and 140 bytes into a destination of size 128 3025 | sprintf(deltaPOC, "%s%d~", deltaPOC, rpsWriter->deltaPOC[i]); | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp:3025:20: warning: 'sprintf' argument 3 overlaps destination object 'deltaPOC' [-Wrestrict] /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp:3016:14: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 3016 | char deltaPOC[128]; | ^~~~~~~~ /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp:3026:33: warning: '~' directive writing 1 byte into a region of size between 0 and 39 [-Wformat-overflow=] 3026 | sprintf(bUsed, "%s%d~", bUsed, rpsWriter->bUsed[i]); | ^ /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp:3026:20: note: 'sprintf' output between 3 and 42 bytes into a destination of size 40 3026 | sprintf(bUsed, "%s%d~", bUsed, rpsWriter->bUsed[i]); | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp:3026:20: warning: 'sprintf' argument 3 overlaps destination object 'bUsed' [-Wrestrict] /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source/encoder/ratecontrol.cpp:3017:14: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 3017 | char bUsed[40]; | ^~~~~ [ 86%] Building CXX object common/CMakeFiles/common.dir/scalinglist.cpp.o [ 88%] Building CXX object encoder/CMakeFiles/encoder.dir/api.cpp.o [ 90%] Building CXX object common/CMakeFiles/common.dir/quant.cpp.o [ 92%] Building CXX object common/CMakeFiles/common.dir/deblock.cpp.o [ 94%] Building CXX object common/CMakeFiles/common.dir/scaler.cpp.o [ 96%] Building CXX object encoder/CMakeFiles/encoder.dir/weightPrediction.cpp.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' [ 96%] Built target common make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' [ 96%] Built target encoder make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' [ 98%] Linking CXX static library libx265.a make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' [100%] Linking CXX shared library libx265.so make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' [100%] Built target x265-static make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' [100%] Built target x265-shared make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' >>> x265 3.5 Installing to staging directory PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot install/fast -C /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' Install the project... -- Install configuration: "Release" -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/lib/libx265.a -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/include/x265.h -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/include/x265_config.h -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/lib/libx265.so.199 -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/lib/libx265.so -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig/x265.pc make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' >>> x265 3.5 Fixing libtool files for la in $(find /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/run/instance-3/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/run/instance-3/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> x265 3.5 Installing to target PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-3/output-1/target install/fast -C /home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' Install the project... -- Install configuration: "Release" -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/libx265.a -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/target/usr/include/x265.h -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/target/usr/include/x265_config.h -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/libx265.so.199 -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/libx265.so -- Installing: /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/pkgconfig/x265.pc make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/x265-3.5/source' >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-Os', '-g0'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-g++%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-gcc-ar%g" -e "s%@TARGET_FC@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-gfortran%g" -e "s%@TARGET_STRIP@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-strip%g" -e "s%@TARGET_ARCH@%riscv64%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/run/instance-3/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-g++%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-gcc-ar%g" -e "s%@TARGET_FC@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-gfortran%g" -e "s%@TARGET_STRIP@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-strip%g" -e "s%@TARGET_ARCH@%riscv64%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_FCFLAGS@%'-Os', '-g0'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/run/instance-3/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/run/instance-3/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/run/instance-3/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells; fi rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/glib-2.0/schemas/*.xml /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/glib-2.0/schemas/*.dtd /home/buildroot/autobuild/run/instance-3/output-1/host/bin/glib-compile-schemas /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/glib-2.0/schemas No schema files found: doing nothing. mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/run/instance-3/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-3/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/run/instance-3/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/run/instance-3/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/run/instance-3/output-1/build/locales.nopurge for dir in /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/locale /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-3/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/include /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/rpm /home/buildroot/autobuild/run/instance-3/output-1/target/usr/doc find /home/buildroot/autobuild/run/instance-3/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/run/instance-3/output-1/target/lib/ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/man /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/info /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/doc /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/lib/debug /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/debug find /home/buildroot/autobuild/run/instance-3/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/run/instance-3/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-3/output-1/host/bin/riscv64-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/run/instance-3/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/run/instance-3/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2022.08-rc2"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2022.08-rc2"; \ echo "PRETTY_NAME=\"Buildroot 2022.08-rc2\"" \ ) > /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-3/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/run/instance-3/output-1/per-package /home/buildroot/autobuild/run/instance-3/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/run/instance-3/output-1/target/usr ln -snf /home/buildroot/autobuild/run/instance-3/output-1/host/riscv64-buildroot-linux-uclibc/sysroot /home/buildroot/autobuild/run/instance-3/output-1/staging make: Leaving directory '/home/buildroot/autobuild/run/instance-3/buildroot' make: Entering directory '/home/buildroot/autobuild/run/instance-3/buildroot' >>> Buildroot 2022.08-rc2 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> host-android-tools 4.2.2+git20130218 Collecting legal info debian/copyright: OK (sha256: 170c5939bf8c8eed1db8f66f2d6155e8c1a3e799e390b55e7aad253195b1ebf5) >>> host-openssl Collecting legal info >>> host-libopenssl 1.1.1q Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> host-skeleton Collecting legal info >>> host-zlib Collecting legal info >>> host-libzlib 1.2.12 Collecting legal info README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> apitrace 10.0 Collecting legal info LICENSE: OK (sha256: 7066bb1b787519c42f8278b77757c21de522cd97755cb30a22759ac401c62260) >>> host-cmake 3.22.3 Collecting legal info Copyright.txt: OK (sha256: f1a4326266aada65b307dac05161a9d02d3dba4fb08b50cb26e3c24cc8a86e97) >>> host-python3 3.10.5 Collecting legal info LICENSE: OK (sha256: f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b) >>> host-autoconf 2.71 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-autoconf-archive 2021.02.19 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-expat 2.4.8 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> host-libffi 3.4.2 Collecting legal info LICENSE: OK (sha256: a61d06e8f7be57928e71e800eb9273b05cb8868c484108afe41e4305bb320dde) >>> libpng 1.6.37 Collecting legal info LICENSE: OK (sha256: bf5e22b9dce8464064ae17a48ea1133c3369ac9e1d80ef9e320e5219aa14ea9b) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 11.3.0 Collecting legal info >>> host-binutils 2.37 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-gmp 6.2.1 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-mpc 1.2.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.0 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> uclibc 1.0.42 Collecting legal info COPYING.LIB: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> host-gcc-initial 11.3.0 Collecting legal info >>> linux-headers 5.17.15 Collecting legal info COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0) LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79) LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f) >>> zlib Collecting legal info >>> libzlib 1.2.12 Collecting legal info README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd) >>> azmq 1.0.3 Collecting legal info LICENSE-BOOST_1_0: OK (sha256: c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566) >>> boost 1.79.0 Collecting legal info LICENSE_1_0.txt: OK (sha256: c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566) >>> zeromq 4.3.4 Collecting legal info COPYING: OK (sha256: 4fd86507c9b486764343065a9e035222869a27b5789efeb4fd93edc85412d7a3) COPYING.LESSER: OK (sha256: 83f32abe61ee58ffb1b007412c08415168c052501dbf56d7a47aaaac52b03ef6) >>> busybox 1.35.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> execline 2.8.0.1 Collecting legal info COPYING: OK (sha256: adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec) >>> skalibs 2.10.0.3 Collecting legal info COPYING: OK (sha256: adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec) >>> fio 3.28 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) MORAL-LICENSE: OK (sha256: 8a240c1ad13d1fe3e58588643d81d0695899be4a669fe6d8fafa76ca6a89db2c) >>> frotz 2.54 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> hans 1.0 Collecting legal info LICENSE: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> initscripts Collecting legal info >>> janet 1.23.0 Collecting legal info LICENSE: OK (sha256: e2d2ae8360d95386af751ac7d1a3da36ea8ceb230e5f0eba7eb762547b1c58c9) >>> host-meson 0.63.0 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.10.2.g51db2.kitware.jobserver-1 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python-setuptools 63.2.0 Collecting legal info LICENSE: OK (sha256: db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8) >>> libdeflate 1.12 Collecting legal info COPYING: OK (sha256: 5d246dd2537307b80fed9ba5fdddf5d0fe7a8f023393a071182b9daed56b40fe) >>> libffi 3.4.2 Collecting legal info LICENSE: OK (sha256: a61d06e8f7be57928e71e800eb9273b05cb8868c484108afe41e4305bb320dde) >>> libglib2 2.72.3 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.72.3 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-pcre 8.45 Collecting legal info LICENCE: OK (sha256: 51b3dea44f63338b84b9c97b3d793826a8397309068cf9379a423216ab8ea5b2) >>> host-util-linux 2.38 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> pcre 8.45 Collecting legal info LICENCE: OK (sha256: 51b3dea44f63338b84b9c97b3d793826a8397309068cf9379a423216ab8ea5b2) >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> rtmpdump c5f04a58fc2aeea6296ca7c44ee4734c18401aa3 Collecting legal info librtmp/COPYING: OK (sha256: 03fe7ca91cc28e99b4003d5b3bd4ce3b084d4c475fdf9975cf0e7fdf4dc739cd) >>> s6 2.10.0.3 Collecting legal info COPYING: OK (sha256: adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec) >>> sg3_utils 1.47 Collecting legal info COPYING: OK (sha256: d212debdb0a5d7754c977f6dc53bb6c88b4ace7ab784ddbccd06bb970adb1a37) BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a) >>> x265 3.5 Collecting legal info COPYING: OK (sha256: d8afb1bcc7a2cfc603683b168d6987ef0a48e59e0da3693bf55c5d33b67e2b49) WARNING: the Buildroot source code has not been saved WARNING: gcc-final-11.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-11.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/run/instance-3/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/run/instance-3/buildroot'