make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2.so.2.0.0 /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libsgutils2.so.2.0.0 libtool: install: (cd /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so.2 || { rm -f libsgutils2.so.2 && ln -s libsgutils2.so.2.0.0 libsgutils2.so.2; }; }) libtool: install: (cd /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/lib' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/lib' Making install in src make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/src' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin' libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_sync /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_zone /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/src' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/src' Making install in doc make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/doc' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/doc' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/scripts' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature '/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/scripts' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/scripts' make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' make[1]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' >>> sg3_utils 1.42 Fixing libtool files >>> sg3_utils 1.42 Installing to target PATH="/home/buildroot/build/instance-0/output/host/bin:/home/buildroot/build/instance-0/output/host/sbin:/sbin:/usr/sbin:/bin:/usr/bin" /usr/bin/make -j8 DESTDIR=/home/buildroot/build/instance-0/output/target install -C /home/buildroot/build/instance-0/output/build/sg3_utils-1.42/ make[1]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' Making install in include make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/include' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/include' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/target/usr/include/scsi' /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_pt.h sg_linux_inc.h sg_io_linux.h '/home/buildroot/build/instance-0/output/target/usr/include/scsi' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/include' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/include' Making install in lib make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/lib' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/lib' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/target/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/home/buildroot/build/instance-0/output/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2.so.2.0.0 /home/buildroot/build/instance-0/output/target/usr/lib/libsgutils2.so.2.0.0 libtool: install: (cd /home/buildroot/build/instance-0/output/target/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so.2 || { rm -f libsgutils2.so.2 && ln -s libsgutils2.so.2.0.0 libsgutils2.so.2; }; }) libtool: install: (cd /home/buildroot/build/instance-0/output/target/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/build/instance-0/output/target/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/lib' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/lib' Making install in src make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/src' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/build/instance-0/output/target/usr/bin' libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/build/instance-0/output/target/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/build/instance-0/output/target/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/build/instance-0/output/target/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/build/instance-0/output/target/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/build/instance-0/output/target/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/build/instance-0/output/target/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/build/instance-0/output/target/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/build/instance-0/output/target/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/build/instance-0/output/target/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/build/instance-0/output/target/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/build/instance-0/output/target/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/build/instance-0/output/target/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/build/instance-0/output/target/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/build/instance-0/output/target/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/build/instance-0/output/target/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/build/instance-0/output/target/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/build/instance-0/output/target/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/build/instance-0/output/target/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/build/instance-0/output/target/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/build/instance-0/output/target/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/build/instance-0/output/target/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/build/instance-0/output/target/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/build/instance-0/output/target/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/build/instance-0/output/target/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/build/instance-0/output/target/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/build/instance-0/output/target/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/build/instance-0/output/target/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/build/instance-0/output/target/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/build/instance-0/output/target/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/build/instance-0/output/target/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/build/instance-0/output/target/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/build/instance-0/output/target/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/build/instance-0/output/target/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/build/instance-0/output/target/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/build/instance-0/output/target/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/build/instance-0/output/target/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/build/instance-0/output/target/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/build/instance-0/output/target/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_sync /home/buildroot/build/instance-0/output/target/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/build/instance-0/output/target/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/build/instance-0/output/target/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/build/instance-0/output/target/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/build/instance-0/output/target/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/build/instance-0/output/target/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/build/instance-0/output/target/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/build/instance-0/output/target/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/build/instance-0/output/target/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/build/instance-0/output/target/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/build/instance-0/output/target/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_zone /home/buildroot/build/instance-0/output/target/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/build/instance-0/output/target/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/build/instance-0/output/target/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/build/instance-0/output/target/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/build/instance-0/output/target/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/build/instance-0/output/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/build/instance-0/output/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/build/instance-0/output/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/build/instance-0/output/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/build/instance-0/output/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/build/instance-0/output/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/build/instance-0/output/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/build/instance-0/output/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/build/instance-0/output/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/build/instance-0/output/target/usr/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/src' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/src' Making install in doc make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/doc' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 '/home/buildroot/build/instance-0/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/build/instance-0/output/target/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/doc' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/scripts' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature '/home/buildroot/build/instance-0/output/target/usr/bin' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/scripts' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42/scripts' make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' make[1]: Leaving directory '/home/buildroot/build/instance-0/output/build/sg3_utils-1.42' for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/buildroot/build/instance-0/output/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/buildroot/build/instance-0/output/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /home/buildroot/build/instance-0/output/target/usr/bin/${prog}; done sdparm-1.10.tar.xz: OK (sha256: 7dc9e148cef22744e00809dad21b59ac544e3615001bc1b2399978f73e1d58ca) >>> sdparm 1.10 Extracting xzcat /home/buildroot/build/instance-0/dl/sdparm/sdparm-1.10.tar.xz | tar --strip-components=1 -C /home/buildroot/build/instance-0/output/build/sdparm-1.10 -xf - >>> sdparm 1.10 Patching >>> sdparm 1.10 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/build/instance-0/output/build/sdparm-1.10 -name $file); do cp support/gnuconfig/$file $i; done; done >>> sdparm 1.10 Patching libtool >>> sdparm 1.10 Configuring (cd /home/buildroot/build/instance-0/output/build/sdparm-1.10/ && rm -rf config.cache && PATH="/home/buildroot/build/instance-0/output/host/bin:/home/buildroot/build/instance-0/output/host/sbin:/sbin:/usr/sbin:/bin:/usr/bin" AR="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-ar" AS="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-as" LD="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-ld" NM="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-nm" CC="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc" GCC="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc" CPP="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-cpp" CXX="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-g++" FC="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gfortran" F77="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gfortran" RANLIB="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-ranlib" READELF="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-readelf" STRIP="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-strip" OBJCOPY="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-objcopy" OBJDUMP="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/build/instance-0/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/build/instance-0/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/build/instance-0/output/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/build/instance-0/output/host/lib -Wl,-rpath,/home/buildroot/build/instance-0/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-as" DEFAULT_LINKER="/home/buildroot/build/instance-0/output/host/bin/powerpc-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/build/instance-0/output/host/bin/pkg-config" STAGING_DIR="/home/buildroot/build/instance-0/output/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-uclibc --host=powerpc-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc-buildroot-linux-uclibc-strip... /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for powerpc-buildroot-linux-uclibc-gcc... /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc accepts -g... yes checking for /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc option to accept ISO C89... none needed checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc... none checking how to run the C preprocessor... /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-cpp checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for linux/types.h... yes checking for linux/bsg.h... yes checking for linux/kdev_t.h... yes checking for getopt_long... yes checking build system type... x86_64-pc-linux-gnu checking host system type... powerpc-buildroot-linux-uclibc checking for sg_ll_inquiry in -lsgutils2... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating doc/Makefile config.status: creating scripts/Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared >>> sdparm 1.10 Building PATH="/home/buildroot/build/instance-0/output/host/bin:/home/buildroot/build/instance-0/output/host/sbin:/sbin:/usr/sbin:/bin:/usr/bin" /usr/bin/make -j8 -C /home/buildroot/build/instance-0/output/build/sdparm-1.10/ make[1]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' /usr/bin/make all-recursive make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' Making all in src make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/src' /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -I. -I.. -I/scsi -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -iquote ../include -Wall -W -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o sdparm.o sdparm.c /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -I. -I.. -I/scsi -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -iquote ../include -Wall -W -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o sdparm_data.o sdparm_data.c /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -I. -I.. -I/scsi -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -iquote ../include -Wall -W -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o sdparm_data_vendor.o sdparm_data_vendor.c /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -I. -I.. -I/scsi -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -iquote ../include -Wall -W -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o sdparm_access.o sdparm_access.c /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -I. -I.. -I/scsi -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -iquote ../include -Wall -W -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o sdparm_vpd.o sdparm_vpd.c /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -I. -I.. -I/scsi -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -iquote ../include -Wall -W -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o sdparm_cmd.o sdparm_cmd.c /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-gcc -iquote ../include -Wall -W -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o sdparm sdparm.o sdparm_data.o sdparm_data_vendor.o sdparm_access.o sdparm_vpd.o sdparm_cmd.o -lsgutils2 make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/src' Making all in doc make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/doc' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/doc' Making all in scripts make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/scripts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/scripts' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' make[1]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' >>> sdparm 1.10 Installing to target PATH="/home/buildroot/build/instance-0/output/host/bin:/home/buildroot/build/instance-0/output/host/sbin:/sbin:/usr/sbin:/bin:/usr/bin" /usr/bin/make -j8 DESTDIR=/home/buildroot/build/instance-0/output/target install -C /home/buildroot/build/instance-0/output/build/sdparm-1.10/ make[1]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' Making install in src make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/src' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/target/usr/bin' /usr/bin/install -c sdparm '/home/buildroot/build/instance-0/output/target/usr/bin' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/src' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/src' Making install in doc make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/doc' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/target/usr/share/man/man8' /usr/bin/install -c -m 644 sdparm.8 sas_disk_blink.8 scsi_ch_swp.8 '/home/buildroot/build/instance-0/output/target/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/doc' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/scripts' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/build/instance-0/output/target/usr/bin' /usr/bin/install -c sas_disk_blink scsi_ch_swp '/home/buildroot/build/instance-0/output/target/usr/bin' make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/scripts' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10/scripts' make[2]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' make[3]: Entering directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' make[2]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' make[1]: Leaving directory '/home/buildroot/build/instance-0/output/build/sdparm-1.10' >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/buildroot/build/instance-0/output/build/packages-file-list.txt ./support/scripts/check-uniq-files -t staging /home/buildroot/build/instance-0/output/build/packages-file-list-staging.txt Warning: staging file "./usr/lib/libosip2.la" is touched by more than one package: [u'libosip2', u'libeXosip2', u'libexif', u'liblo', u'libnfnetlink', u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/liblinphone.la" is touched by more than one package: [u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libspeexdsp.la" is touched by more than one package: [u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libogg.la" is touched by more than one package: [u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libltdl.la" is touched by more than one package: [u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libibrcommon.la" is touched by more than one package: [u'ibrcommon', u'ibrdtn', u'libosip2', u'libeXosip2', u'libexif', u'liblo', u'libnfnetlink', u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libmediastreamer_voip.la" is touched by more than one package: [u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/liblo.la" is touched by more than one package: [u'liblo', u'libnfnetlink', u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libortp.la" is touched by more than one package: [u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libmtdev.la" is touched by more than one package: [u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libeXosip2.la" is touched by more than one package: [u'libeXosip2', u'libexif', u'liblo', u'libnfnetlink', u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libosipparser2.la" is touched by more than one package: [u'libosip2', u'libeXosip2', u'libexif', u'liblo', u'libnfnetlink', u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libexif.la" is touched by more than one package: [u'libexif', u'liblo', u'libnfnetlink', u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libnfnetlink.la" is touched by more than one package: [u'libnfnetlink', u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libibrdtn.la" is touched by more than one package: [u'ibrdtn', u'libosip2', u'libeXosip2', u'libexif', u'liblo', u'libnfnetlink', u'libogg', u'libtool', u'speex', u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libmediastreamer_base.la" is touched by more than one package: [u'linphone', u'mtdev', u'sg3_utils'] Warning: staging file "./usr/lib/libspeex.la" is touched by more than one package: [u'speex', u'linphone', u'mtdev', u'sg3_utils'] ./support/scripts/check-uniq-files -t host /home/buildroot/build/instance-0/output/build/packages-file-list-host.txt mkdir -p /home/buildroot/build/instance-0/output/target/etc echo "buildroot" > /home/buildroot/build/instance-0/output/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/build/instance-0/output/target/etc/hosts mkdir -p /home/buildroot/build/instance-0/output/target/etc echo "Welcome to Buildroot" > /home/buildroot/build/instance-0/output/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/build/instance-0/output/target/etc/shadow rm -f /home/buildroot/build/instance-0/output/target/bin/sh rm -f /home/buildroot/build/instance-0/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/buildroot/build/instance-0/output/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/build/instance-0/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/build/instance-0/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/build/instance-0/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/build/instance-0/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/build/instance-0/output/target/usr/include /home/buildroot/build/instance-0/output/target/usr/share/aclocal \ /home/buildroot/build/instance-0/output/target/usr/lib/pkgconfig /home/buildroot/build/instance-0/output/target/usr/share/pkgconfig \ /home/buildroot/build/instance-0/output/target/usr/lib/cmake /home/buildroot/build/instance-0/output/target/usr/share/cmake find /home/buildroot/build/instance-0/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/build/instance-0/output/target/lib/ /home/buildroot/build/instance-0/output/target/usr/lib/ /home/buildroot/build/instance-0/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: `/home/buildroot/build/instance-0/output/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/build/instance-0/output/target/usr/share/gdb rm -rf /home/buildroot/build/instance-0/output/target/usr/share/bash-completion rm -rf /home/buildroot/build/instance-0/output/target/usr/share/zsh rm -rf /home/buildroot/build/instance-0/output/target/usr/man /home/buildroot/build/instance-0/output/target/usr/share/man rm -rf /home/buildroot/build/instance-0/output/target/usr/info /home/buildroot/build/instance-0/output/target/usr/share/info rm -rf /home/buildroot/build/instance-0/output/target/usr/doc /home/buildroot/build/instance-0/output/target/usr/share/doc rm -rf /home/buildroot/build/instance-0/output/target/usr/share/gtk-doc rmdir /home/buildroot/build/instance-0/output/target/usr/share 2>/dev/null || true find /home/buildroot/build/instance-0/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/build/instance-0/output/target/lib/ -type f -name 'libpthread*.so*' | \ xargs -r /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-strip --remove-section=.comment --remove-section=.note --strip-debug find /home/buildroot/build/instance-0/output/target/lib/ -type f -name 'ld-*.so*' | \ xargs -r /home/buildroot/build/instance-0/output/host/bin/powerpc-linux-strip --remove-section=.comment --remove-section=.note --strip-debug test -f /home/buildroot/build/instance-0/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/build/instance-0/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/build/instance-0/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2018.05-git-00881-g4f726ce"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2018.05-git"; \ echo "PRETTY_NAME=\"Buildroot 2018.05-git\"" \ ) > /home/buildroot/build/instance-0/output/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/build/instance-0/output/target/etc >>> Sanitizing RPATH in target tree /home/buildroot/build/instance-0/buildroot/support/scripts/fix-rpath target make: Leaving directory '/home/buildroot/build/instance-0/buildroot' make: Entering directory '/home/buildroot/build/instance-0/buildroot' >>> Buildroot 2018.05-git-00881-g4f726ce Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-lzip 1.20 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> debianutils 4.8.1 Collecting legal info ERROR: No hash found for debian/copyright >>> edid-decode f56f329ed23a25d002352dedba1e8f092a47286f Collecting legal info ERROR: No hash found for edid-decode.c >>> fb-test-app rosetta-1.1.0 Collecting legal info ERROR: No hash found for COPYING >>> ghostscript-fonts 8.11 Collecting legal info ERROR: No hash found for COPYING >>> ibrcommon 1.0.1 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for README >>> host-pkgconf 0.9.12 Collecting legal info ERROR: No hash found for COPYING >>> ibrdtn-tools 1.0.1 Collecting legal info ERROR: No hash found for COPYING >>> ibrdtn 1.0.1 Collecting legal info ERROR: No hash found for COPYING >>> libeXosip2 3.6.0 Collecting legal info ERROR: No hash found for COPYING >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> libosip2 3.6.0 Collecting legal info ERROR: No hash found for COPYING >>> libexif 0.6.21 Collecting legal info ERROR: No hash found for COPYING >>> liblo 0.29 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> libnfnetlink 1.0.1 Collecting legal info ERROR: No hash found for COPYING >>> libogg 1.3.3 Collecting legal info ERROR: No hash found for COPYING >>> libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> lighttpd 1.4.48 Collecting legal info COPYING: OK (sha256: 5c98cad2fbaf5c5e2562bcbab401a7c557c1bb1bac9914ecc63730925052fb13) >>> linphone 3.6.1 Collecting legal info ERROR: No hash found for COPYING >>> host-gettext 0.19.8.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) ERROR: No hash found for gettext-runtime/intl/COPYING.LIB >>> host-libxml2 2.9.7 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> host-intltool 0.51.0 Collecting legal info ERROR: No hash found for COPYING >>> host-libxml-parser-perl 2.44 Collecting legal info ERROR: No hash found for README >>> host-expat 2.2.5 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> speex 1.2rc1 Collecting legal info ERROR: No hash found for COPYING >>> minissdpd 1.5 Collecting legal info LICENSE: OK (sha256: c432d6ee83deb6a0c105a2c3ebd11e3855ab91498b0847a8657e68ce8e4491a5) >>> mtdev 1.1.4 Collecting legal info ERROR: No hash found for COPYING >>> mtdev2tuio e1e7378d86abe751158e743586133022f32fa4d1 Collecting legal info ERROR: No hash found for COPYING >>> netcat 0.7.1 Collecting legal info ERROR: No hash found for COPYING >>> odhcploc 20111021 Collecting legal info ERROR: No hash found for COPYING >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> sdparm 1.10 Collecting legal info ERROR: No hash found for COPYING >>> sg3_utils 1.42 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for BSD_LICENSE WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) Legal info produced in /home/buildroot/build/instance-0/output/legal-info make: Leaving directory '/home/buildroot/build/instance-0/buildroot'