>>> clamav 1.0.1 Extracting mkdir -p /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host mkdir -p /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target gzip -d -c /home/buildroot/autobuild/run/instance-1/dl/clamav/clamav-1.0.1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1 -xf - >>> clamav 1.0.1 Patching >>> clamav 1.0.1 Configuring mkdir -p /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/bzip2/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/bzip2/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/host-cmake/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/host-cmake/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/host-pkgconf/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/host-pkgconf/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/host-rustc/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/host-rustc/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/json-c/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/json-c/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/libcurl/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/libcurl/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/libmspack/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/libmspack/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/libxml2/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/libxml2/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/ncurses/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/ncurses/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/openssl/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/openssl/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/pcre2/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/pcre2/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/zlib/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/zlib/host/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host mkdir -p /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/bzip2/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/bzip2/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/host-cmake/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/host-cmake/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/host-pkgconf/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/host-pkgconf/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/host-rustc/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/host-rustc/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/json-c/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/json-c/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/libcurl/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/libcurl/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/libmspack/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/libmspack/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/libxml2/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/libxml2/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/ncurses/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/ncurses/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/openssl/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/openssl/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/pcre2/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/pcre2/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target rsync -a --link-dest=/home/buildroot/autobuild/run/instance-1/output-1/per-package/zlib/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/zlib/target/ /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/target (mkdir -p /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/ && cd /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/ && rm -f CMakeCache.txt && PATH="/home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin:/home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" LIBS="-latomic" /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/cmake /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/ -G"Unix Makefiles" -DCMAKE_TOOLCHAIN_FILE="/home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_INSTALL_RUNSTATEDIR="/run" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON -DCMAKE_SKIP_INSTALL_RPATH=ON -DENABLE_JSON_SHARED=ON -DENABLE_MAN_PAGES=OFF -DENABLE_MILTER=OFF -DENABLE_TESTS=OFF -DHAVE_SYSTEM_LFS_FTS=ON -DRUST_COMPILER_TARGET=armv5te-unknown-linux-gnueabi -Dtest_run_result=ON -Dtest_run_result__TRYRUN_OUTPUT=ON -DENABLE_APP=ON -DENABLE_SYSTEMD=OFF ) -- The C compiler identification is GNU 4.8.3 -- The CXX compiler identification is GNU 4.8.3 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/arm-none-linux-gnueabi-gcc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/arm-none-linux-gnueabi-g++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Found Git: /usr/bin/git (found version "2.17.1") -- Rust tool `cargo` found: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/cargo, 1.68.2 -- Rust tool `rustc` found: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/rustc, 1.68.2 -- Rust tool `rustup` not found. -- Rust tool `rust-gdb` not found: Failed to determine version. -- Rust tool `rust-lldb` not found: Failed to determine version. -- Rust tool `rustdoc` found: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/rustdoc, 1.68.2 -- Rust tool `rustfmt` not found. -- Rust tool `bindgen` not found. -- Rust's native static libs: -lgcc_s;-lutil;-lrt;-lpthread;-lm;-ldl;-lc -- Found Rust: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/cargo (found version "1.68.2") -- Looking for pthread.h -- Looking for pthread.h - found -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - found -- Found Threads: TRUE -- Found OpenSSL: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libcrypto.so (found version "1.1.1u") -- Found ZLIB: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libz.so (found version "1.2.13") -- Found BZip2: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libbz2.so (found version "1.0.8") -- Looking for BZ2_bzCompressInit -- Looking for BZ2_bzCompressInit - found -- Found LibXml2: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libxml2.so (found version "2.10.4") -- Found PCRE2: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libpcre2-8.so -- Performing Test Iconv_IS_BUILT_IN -- Performing Test Iconv_IS_BUILT_IN - Success -- Found Iconv: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libc.so -- Found JSONC: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libjson-c.so -- Found CURL: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libcurl.so (found version "8.1.2") -- Found CURSES: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libncurses.so -- Performing Test CXX_FLAG__std_c_14 -- Performing Test CXX_FLAG__std_c_14 - Failed -- Performing Test CXX_FLAG__std_c_11 -- Performing Test CXX_FLAG__std_c_11 - Success -- Looking for arpa/inet.h -- Looking for arpa/inet.h - found -- Looking for fcntl.h -- Looking for fcntl.h - found -- Looking for grp.h -- Looking for grp.h - found -- Looking for limits.h -- Looking for limits.h - found -- Looking for malloc.h -- Looking for malloc.h - found -- Looking for netdb.h -- Looking for netdb.h - found -- Looking for netinet/in.h -- Looking for netinet/in.h - found -- Looking for poll.h -- Looking for poll.h - found -- Looking for pwd.h -- Looking for pwd.h - found -- Looking for stdbool.h -- Looking for stdbool.h - found -- Looking for stdlib.h -- Looking for stdlib.h - found -- Looking for string.h -- Looking for string.h - found -- Looking for strings.h -- Looking for strings.h - found -- Looking for sys/cdefs.h -- Looking for sys/cdefs.h - found -- Looking for sys/dl.h -- Looking for sys/dl.h - not found -- Looking for sys/fileio.h -- Looking for sys/fileio.h - not found -- Looking for sys/mman.h -- Looking for sys/mman.h - found -- Looking for sys/param.h -- Looking for sys/param.h - found -- Looking for sys/queue.h -- Looking for sys/queue.h - found -- Looking for sys/select.h -- Looking for sys/select.h - found -- Looking for sys/socket.h -- Looking for sys/socket.h - found -- Looking for sys/stat.h -- Looking for sys/stat.h - found -- Looking for sys/time.h -- Looking for sys/time.h - found -- Looking for sys/times.h -- Looking for sys/times.h - found -- Looking for sys/uio.h -- Looking for sys/uio.h - found -- Looking for syslog.h -- Looking for syslog.h - found -- Looking for termios.h -- Looking for termios.h - found -- Looking for time.h -- Looking for time.h - found -- Looking for unistd.h -- Looking for unistd.h - found -- Looking for sys/fanotify.h -- Looking for sys/fanotify.h - found -- Looking for resolv.h -- Looking for resolv.h - found -- Looking for dirent.h -- Looking for dirent.h - found -- Looking for dlfcn.h -- Looking for dlfcn.h - found -- Looking for inttypes.h -- Looking for inttypes.h - found -- Looking for sys/inttypes.h -- Looking for sys/inttypes.h - not found -- Looking for sys/int_types.h -- Looking for sys/int_types.h - not found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of ssize_t -- Check size of ssize_t - done -- Check size of off_t -- Check size of off_t - done -- Check size of int -- Check size of int - done -- Check size of short -- Check size of short - done -- Check size of long -- Check size of long - done -- Check size of long long -- Check size of long long - done -- Performing Test HAVE_RESTRICT -- Performing Test HAVE_RESTRICT - Success -- Performing Test HAVE_ATTRIB_PACKED -- Performing Test HAVE_ATTRIB_PACKED - Success -- Performing Test HAVE_ATTRIB_ALIGNED -- Performing Test HAVE_ATTRIB_ALIGNED - Success -- Looking for recvmsg -- Looking for recvmsg - found -- Looking for sendmsg -- Looking for sendmsg - found -- Performing Test HAVE_CONTROL_IN_MSGHDR -- Performing Test HAVE_CONTROL_IN_MSGHDR - Success -- Performing Test HAVE_STRUCT_TM_TM_GMTOFF -- Performing Test HAVE_STRUCT_TM_TM_GMTOFF - Success -- Check size of int * -- Check size of int * - done -- Check size of time_t -- Check size of time_t - done -- Looking for _Exit -- Looking for _Exit - found -- Looking for accept4 -- Looking for accept4 - not found -- Looking for snprintf -- Looking for snprintf - found -- Looking for stat64 -- Looking for stat64 - found -- Looking for strcasestr -- Looking for strcasestr - not found -- Looking for strerror_r -- Looking for strerror_r - found -- Looking for strlcat -- Looking for strlcat - not found -- Looking for strlcpy -- Looking for strlcpy - not found -- Looking for strndup -- Looking for strndup - found -- Looking for strnlen -- Looking for strnlen - found -- Looking for strnstr -- Looking for strnstr - not found -- Looking for sysctlbyname -- Looking for sysctlbyname - not found -- Looking for timegm -- Looking for timegm - found -- Looking for vsnprintf -- Looking for vsnprintf - found -- Looking for fseeko -- Looking for fseeko - found -- Looking for getaddrinfo -- Looking for getaddrinfo - found -- Looking for getpagesize -- Looking for getpagesize - found -- Looking for mkstemp -- Looking for mkstemp - not found -- Looking for poll -- Looking for poll - found -- Looking for setgroups -- Looking for setgroups - not found -- Looking for setsid -- Looking for setsid - found -- Looking for initgroups -- Looking for initgroups - found -- Performing Test C_FLAG__Wall -- Performing Test C_FLAG__Wall - Success -- Performing Test C_FLAG__Wextra -- Performing Test C_FLAG__Wextra - Success -- Performing Test C_FLAG__Wformat_security -- Performing Test C_FLAG__Wformat_security - Success -- Performing Test CXX_FLAG__Wall -- Performing Test CXX_FLAG__Wall - Success -- Performing Test CXX_FLAG__Wformat_security -- Performing Test CXX_FLAG__Wformat_security - Success -- Performing Test CXX_FLAG__Wno_comment -- Performing Test CXX_FLAG__Wno_comment - Success -- Performing Test HAVE_MMAP -- Performing Test HAVE_MMAP - Success -- Performing Test HAVE_MMAP_MAP_ANONYMOUS -- Performing Test HAVE_MMAP_MAP_ANONYMOUS - Success -- Performing Test HAVE_SYSCONF_SC_PAGESIZE -- Performing Test HAVE_SYSCONF_SC_PAGESIZE - Success -- Configuration Options Summary --  Package Version: ClamAV 1.0.1  libclamav version: 11:0:0  libfreshclam version: 2:2:0  Install prefix: /usr  Install database dir: /usr/share/clamav  Install config dir: /usr/etc  Host system: Linux-4.4.0-210-generic  Target system: Linux  Compiler:   Build type: Release  C compiler: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/arm-none-linux-gnueabi-gcc  C++ compiler: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/arm-none-linux-gnueabi-g++  Rust toolchain: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/cargo (1.68.2)  CFLAGS:  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1  CXXFLAGS:  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1  WARNCFLAGS:  -Wall -Wextra -Wformat-security  Build Options:   Build apps: ON  Shared library: ON  Static library: OFF  Enable UnRAR: ON  Examples: OFF  Tests: OFF  Build man pages: OFF  Build doxygen HTML: OFF  Maintainer Mode: OFF  Build Extras:   Build milter: OFF (toggle with -DENABLE_MILTER=ON/OFF)  Build clamonacc: ON (toggle with -DENABLE_CLAMONACC=ON/OFF) -- Engine Options --  Bytecode Runtime:  interpreter  -- libclamav Dependencies --  Compression support: bzip2 /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libbz2.so zlib /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libz.so  XML support:  libxml2 /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/libxml2;/home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/libxml2 /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libxml2.so  RegEx support:  libpcre2 /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libpcre2-8.so  Crypto support:  openssl /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libssl.so;/home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libcrypto.so  JSON support:  json-c /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/json-c /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libjson-c.so  Threading support:  pthread   Locale support:  iconv /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libc.so -- libfreshclam Extra Dependencies --  HTTP support:  curl /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libcurl.so -- Application Extra Dependencies --  GUI support:  ncurses /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libncurses.so  systemd: not found -- Warning: libjson-c is known to share symbol names with other JSON libraries which may result in crashes for applications that use libclamav. Consider providing a static json-c library that was compiled with: CFLAGS="-fPIC". Default build settings for json-c 0.15+ should also work. Use the `-DENABLE_JSON_SHARED=OFF` option to prefer detection of the static library, or use -DJSONC_INCLUDE_DIR and -DJSONC_LIBRARY to specify the static JSON library. -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS -- Build files have been written to: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1 >>> clamav 1.0.1 Building PATH="/home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin:/home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/ make[1]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[2]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 0%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/cabc.c.o [ 0%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zAlloc.c.o [ 0%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/archive.cpp.o [ 0%] Building C object libclamav/CMakeFiles/regex.dir/regex/strlcpy.c.o [ 0%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/cabd.c.o [ 0%] Building C object libclamav/CMakeFiles/regex.dir/regex/regcomp.c.o [ 0%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zBuf.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c: In function 'cli_regcomp_real': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c:188:15: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (p->ssize < len) { ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c: In function 'freeset': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c:1097:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 0; i < css; i++) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c: In function 'freezeset': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c:1125:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 0; i < css; i++) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c:1128:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (i == css) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c: In function 'firstch': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c:1149:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 0; i < css; i++) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c: In function 'nch': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regcomp.c:1166:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 0; i < css; i++) ^ [ 1%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zBuf2.c.o [ 1%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/chmc.c.o [ 2%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/arcread.cpp.o [ 3%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/chmd.c.o [ 3%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zCrc.c.o [ 3%] Building C object libclamav/CMakeFiles/regex.dir/regex/regerror.c.o [ 3%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zCrcOpt.c.o [ 4%] Building C object libclamav/CMakeFiles/regex.dir/regex/regexec.c.o [ 4%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/crc32.c.o [ 4%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zDec.c.o [ 4%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/hlpc.c.o In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regexec.c:81:0: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c: In function 'smatcher': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:219:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 1; i <= m->g->nsub; i++) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:226:16: warning: assignment from incompatible pointer type [enabled by default] m->lastpos = (char **)cli_malloc((g->nplus+1) * ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:277:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 1; i < nmatch; i++) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:278:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (i <= m->g->nsub) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c: In function 'sdissect': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:311:14: warning: variable 'dp' set but not used [-Wunused-but-set-variable] const char *dp; ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/regexec.c:130:0: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c: In function 'lmatcher': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:219:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 1; i <= m->g->nsub; i++) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:226:16: warning: assignment from incompatible pointer type [enabled by default] m->lastpos = (char **)cli_malloc((g->nplus+1) * ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:277:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 1; i < nmatch; i++) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:278:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (i <= m->g->nsub) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c: In function 'ldissect': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/regex/engine.c:311:14: warning: variable 'dp' set but not used [-Wunused-but-set-variable] const char *dp; ^ [ 4%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/hlpd.c.o [ 5%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/kwajc.c.o [ 5%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/kwajd.c.o [ 5%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/blake2s.cpp.o [ 6%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zFile.c.o [ 6%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/litc.c.o [ 6%] Building C object libclamav/CMakeFiles/regex.dir/regex/regfree.c.o [ 6%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/litd.c.o [ 6%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zIn.c.o [ 6%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/cmddata.cpp.o [ 7%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/lzssd.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 7%] Built target regex [ 7%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/7zStream.c.o [ 7%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/lzxc.c.o [ 7%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/lzxd.c.o [ 7%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/consio.cpp.o make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 7%] Building C object libclamav/CMakeFiles/yara.dir/yara_compiler.c.o [ 8%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/crc.cpp.o [ 8%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/mszipc.c.o [ 8%] Building C object libclamav/CMakeFiles/yara.dir/yara_exec.c.o [ 9%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/mszipd.c.o [ 9%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/Bcj2.c.o [ 9%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/crypt.cpp.o [ 10%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/Bra.c.o [ 10%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/oabc.c.o [ 10%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/oabd.c.o [ 10%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/Bra86.c.o [ 10%] Building C object libclamav/CMakeFiles/yara.dir/yara_hash.c.o [ 10%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/qtmd.c.o [ 10%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/dll.cpp.o [ 10%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/BraIA64.c.o [ 11%] Building C object libclamav/CMakeFiles/yara.dir/yara_parser.c.o [ 11%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/CpuArch.c.o [ 12%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/system.c.o [ 13%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/Delta.c.o [ 13%] Building C object libclamav/CMakeFiles/yara.dir/yara_arena.c.o [ 13%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/encname.cpp.o [ 13%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/szddc.c.o [ 13%] Building C object libclammspack/CMakeFiles/clammspack.dir/mspack/szddd.c.o [ 13%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/Lzma2Dec.c.o [ 13%] Linking C shared library libclammspack.so [ 14%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/errhnd.cpp.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 14%] Built target clammspack [ 14%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/extinfo.cpp.o [ 14%] Building C object libclamav/CMakeFiles/yara.dir/yara_grammar.c.o [ 14%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/LzmaDec.c.o [ 14%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/Ppmd7.c.o [ 14%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/extract.cpp.o [ 15%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/filcreat.cpp.o [ 16%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/Ppmd7Dec.c.o [ 17%] Building C object libclamav/CMakeFiles/yara.dir/yara_lexer.c.o make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 17%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_add.c.o [ 17%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_add_d.c.o [ 17%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/Xz.c.o [ 18%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_addmod.c.o [ 18%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/file.cpp.o [ 18%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_cmp.c.o [ 18%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_cmp_d.c.o [ 18%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_cmp_mag.c.o [ 18%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/XzCrc64.c.o [ 19%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_sub.c.o [ 19%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_sub_d.c.o [ 19%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/fp_submod.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 19%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/filefn.cpp.o [ 19%] Built target yara [ 19%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/s_fp_add.c.o [ 19%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/XzDec.c.o [ 20%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/addsub/s_fp_sub.c.o [ 21%] Building C object libclamav/CMakeFiles/lzma_sdk.dir/7z/XzIn.c.o [ 21%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_radix_size.c.o [ 21%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_read_radix.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c: In function 'Xz_ParseHeader': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c:499:56: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (CrcCalc(buf + XZ_SIG_SIZE, XZ_STREAM_FLAGS_SIZE) != ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c: In function 'Xz_CheckFooter': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c:509:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] (GetUi32(buf) == CrcCalc(buf + 4, 6) && ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c: In function 'XzBlock_Parse': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c:525:35: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (CrcCalc(header, headerSize) != GetUi32(header + headerSize)) ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/matcher.h:29:0, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:22, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/CpuArch.h:8, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c:22: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c: In function 'XzUnpacker_Code': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/CpuArch.h:21:21: note: in expansion of macro 'cli_readint32' #define GetUi32(p) (cli_readint32(p)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c:848:41: note: in expansion of macro 'GetUi32' if (CRC_GET_DIGEST(p->crc) != GetUi32(p->buf)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzDec.c:848:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (CRC_GET_DIGEST(p->crc) != GetUi32(p->buf)) ^ [ 21%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_read_signed_bin.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzIn.c: In function 'Xz_ReadIndex2': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzIn.c:87:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (crc != GetUi32(buf + size)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzIn.c:79:24: warning: variable 'crcStartPos' set but not used [-Wunused-but-set-variable] size_t i, numBlocks, crcStartPos, pos = 1; ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/matcher.h:29:0, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:22, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/CpuArch.h:8, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzIn.c:13: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzIn.c: In function 'Xz_ReadBackward': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/CpuArch.h:21:21: note: in expansion of macro 'cli_readint32' #define GetUi32(p) (cli_readint32(p)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzIn.c:201:7: note: in expansion of macro 'GetUi32' if (GetUi32(buf) != CrcCalc(buf + 4, 6)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/7z/XzIn.c:201:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (GetUi32(buf) != CrcCalc(buf + 4, 6)) ^ [ 21%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/filestr.cpp.o [ 22%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_read_unsigned_bin.c.o [ 22%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_reverse.c.o [ 22%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_s_rmap.c.o make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 22%] Building C object libclamav/CMakeFiles/bytecode_runtime.dir/bytecode_nojit.c.o [ 22%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_signed_bin_size.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 22%] Built target lzma_sdk [ 23%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_to_signed_bin.c.o [ 24%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/find.cpp.o [ 24%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_to_unsigned_bin.c.o [ 24%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_toradix.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 24%] Built target bytecode_runtime [ 24%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/getbits.cpp.o [ 24%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_toradix_n.c.o make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 25%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bin/fp_unsigned_bin_size.c.o make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 25%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bit/fp_cnt_lsb.c.o [ 26%] Building clamav_rust in /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1 with: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/bin/cargo build --target armv5te-unknown-linux-gnueabi --release --target-dir /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1 [ 26%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/global.cpp.o [ 26%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bit/fp_count_bits.c.o [ 26%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bit/fp_div_2.c.o [ 26%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/hash.cpp.o [ 27%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bit/fp_div_2d.c.o [ 27%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bit/fp_lshd.c.o [ 28%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/headers.cpp.o [ 28%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bit/fp_mod_2d.c.o [ 29%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/bit/fp_rshd.c.o [ 29%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/list.cpp.o [ 29%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/divide/fp_div.c.o [ 29%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/match.cpp.o [ 29%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/divide/fp_div_d.c.o [ 29%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/divide/fp_mod.c.o [ 30%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/divide/fp_mod_d.c.o [ 31%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/options.cpp.o [ 31%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/pathfn.cpp.o [ 31%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/exptmod/fp_2expt.c.o Compiling autocfg v1.1.0 Compiling libc v0.2.139 Compiling cfg-if v1.0.0 Compiling proc-macro2 v1.0.51 Compiling unicode-ident v1.0.6 Compiling quote v1.0.23 [ 31%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/exptmod/fp_exptmod.c.o Compiling syn v1.0.107 Compiling version_check v0.9.4 Compiling scopeguard v1.1.0 Compiling memchr v2.5.0 Compiling crossbeam-utils v0.8.14 [ 31%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/qopen.cpp.o [ 31%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/misc/fp_ident.c.o [ 32%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/misc/fp_set.c.o [ 32%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mont/fp_montgomery_calc_normalization.c.o [ 32%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mont/fp_montgomery_reduce.c.o [ 32%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/rar.cpp.o [ 32%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/rarvm.cpp.o Compiling num-traits v0.2.15 [ 32%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mont/fp_montgomery_setup.c.o [ 33%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul.c.o [ 34%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/rawread.cpp.o Compiling memoffset v0.7.1 Compiling log v0.4.17 [ 34%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba.c.o [ 34%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/rdwrfn.cpp.o [ 34%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_2.c.o [ 34%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_2d.c.o [ 34%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/recvol.cpp.o [ 35%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_12.c.o Compiling crossbeam-epoch v0.9.13 [ 35%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_17.c.o Compiling num-integer v0.1.45 [ 35%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/resource.cpp.o [ 35%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_20.c.o [ 36%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/rijndael.cpp.o [ 36%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/rs.cpp.o Compiling serde_derive v1.0.152 [ 36%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/rs16.cpp.o Compiling num_cpus v1.15.0 Compiling typenum v1.16.0 [ 36%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/scantree.cpp.o Compiling glob v0.3.1 [ 36%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_24.c.o Compiling serde v1.0.152 [ 37%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/secpassword.cpp.o [ 37%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/sha1.cpp.o [ 37%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/sha256.cpp.o Compiling atty v0.2.14 Compiling generic-array v0.14.6 Compiling lock_api v0.4.9 [ 37%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/smallfn.cpp.o Compiling clang-sys v1.4.0 [ 38%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/strfn.cpp.o [ 38%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/strlist.cpp.o Compiling unicode-width v0.1.10 Compiling crc32fast v1.3.2 [ 38%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/system.cpp.o Compiling rayon-core v1.10.2 [ 39%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/threadpool.cpp.o [ 39%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/timefn.cpp.o [ 40%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_28.c.o [ 40%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/ui.cpp.o Compiling adler v1.0.2 Compiling textwrap v0.11.0 [ 40%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/unicode.cpp.o Compiling miniz_oxide v0.6.2 [ 41%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/unpack.cpp.o Compiling crossbeam-deque v0.8.2 Compiling aho-corasick v0.7.20 [ 41%] Building CXX object libclamunrar/CMakeFiles/clamunrar.dir/volume.cpp.o Compiling crossbeam-channel v0.5.6 Compiling indexmap v1.9.2 Compiling strsim v0.8.0 [ 41%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_3.c.o [ 41%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_32.c.o Compiling futures-core v0.3.26 Compiling minimal-lexical v0.2.1 Compiling regex-syntax v0.6.28 Compiling ansi_term v0.12.1 Compiling vec_map v0.8.2 Compiling bitflags v1.3.2 Compiling serde_json v1.0.93 [ 41%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_4.c.o Compiling clap v2.34.0 [ 42%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_48.c.o [ 42%] Linking CXX shared library libclamunrar.so make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 42%] Built target clamunrar make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 42%] Building CXX object libclamunrar_iface/CMakeFiles/clamunrar_iface.dir/unrar_iface.cpp.o Compiling nom v7.1.3 [ 43%] Linking CXX shared library libclamunrar_iface.so make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 43%] Built target clamunrar_iface [ 43%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_6.c.o [ 43%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_64.c.o Compiling getrandom v0.2.8 Compiling libloading v0.7.4 Compiling remove_dir_all v0.5.3 Compiling humantime v2.1.0 Compiling termcolor v1.2.0 Compiling cbindgen v0.20.0 Compiling regex v1.7.1 [ 43%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_7.c.o [ 44%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_8.c.o [ 44%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_9.c.o [ 44%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_comba_small_set.c.o Compiling hashbrown v0.12.3 Compiling ryu v1.0.12 Compiling either v1.8.1 Compiling fastrand v1.8.0 Compiling itoa v1.0.5 Compiling unicode-segmentation v1.10.1 Compiling bindgen v0.59.2 Compiling which v4.4.0 Compiling heck v0.3.3 Compiling env_logger v0.9.3 Compiling tempfile v3.3.0 Compiling rayon v1.6.1 Compiling cexpr v0.6.0 Compiling nanorand v0.7.0 Compiling flate2 v1.0.25 [ 45%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mul_d.c.o Compiling spin v0.9.5 [ 45%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/mul/fp_mulmod.c.o [ 45%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/numtheory/fp_invmod.c.o Compiling rustfft v6.1.0 [ 45%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr.c.o Compiling num-rational v0.4.1 [ 46%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_12.c.o Compiling peeking_take_while v0.1.2 [ 46%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_17.c.o Compiling simd-adler32 v0.3.4 [ 46%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_20.c.o Compiling weezl v0.1.7 Compiling futures-sink v0.3.26 Compiling shlex v1.1.0 Compiling strength_reduce v0.2.4 Compiling rustc-hash v1.1.0 Compiling lazy_static v1.4.0 Compiling lazycell v1.3.0 Compiling transpose v0.2.2 [ 46%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_24.c.o Compiling zune-inflate v0.2.42 [ 47%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_28.c.o Compiling block-buffer v0.10.3 Compiling crypto-common v0.1.6 Compiling pin-project-internal v1.0.12 Compiling primal-check v0.3.3 [ 47%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_3.c.o Compiling num-complex v0.4.3 [ 47%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_32.c.o [ 47%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_4.c.o [ 48%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_48.c.o Compiling jpeg-decoder v0.3.0 Compiling threadpool v1.8.1 Compiling half v2.2.1 Compiling thiserror v1.0.38 [ 48%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_6.c.o [ 48%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_64.c.o Compiling lebe v0.5.2 Compiling bit_field v0.10.1 Compiling smallvec v1.10.0 Compiling pin-project v1.0.12 Compiling flume v0.10.14 Compiling color_quant v1.1.0 Compiling png v0.17.7 [ 48%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_7.c.o [ 49%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_8.c.o [ 49%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_9.c.o Compiling exr v1.5.3 Compiling gif v0.11.4 [ 49%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_generic.c.o Compiling tiff v0.8.1 [ 49%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqr_comba_small_set.c.o [ 50%] Building C object libclamav/CMakeFiles/tomsfastmath.dir/tomsfastmath/sqr/fp_sqrmod.c.o Compiling digest v0.10.6 Compiling thiserror-impl v1.0.38 make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 50%] Built target tomsfastmath Compiling scoped_threadpool v0.1.9 Compiling byteorder v1.4.3 Compiling bytemuck v1.13.0 Compiling image v0.24.5 Compiling sha2 v0.10.6 Compiling rustdct v0.7.1 Compiling hex v0.4.3 Compiling toml v0.5.11 Compiling clamav_rust v0.0.1 (/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav_rust) Finished release [optimized] target(s) in 48.63s make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 50%] Built target clamav_rust_target make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 50%] Building C object libclamav/CMakeFiles/clamav.dir/conv.c.o [ 50%] Building C object libclamav/CMakeFiles/clamav.dir/blob.c.o [ 51%] Building C object libclamav/CMakeFiles/clamav.dir/fpu.c.o [ 51%] Building C object libclamav/CMakeFiles/clamav.dir/hashtab.c.o [ 51%] Building C object libclamav/CMakeFiles/clamav.dir/iowrap.c.o [ 51%] Building C object libclamav/CMakeFiles/clamav.dir/json_api.c.o [ 52%] Building C object libclamav/CMakeFiles/clamav.dir/others_common.c.o [ 52%] Building C object libclamav/CMakeFiles/clamav.dir/qsort.c.o [ 52%] Building C object libclamav/CMakeFiles/clamav.dir/sf_base64decode.c.o [ 52%] Building C object libclamav/CMakeFiles/clamav.dir/str.c.o [ 53%] Building C object libclamav/CMakeFiles/clamav.dir/strlcat.c.o [ 53%] Building C object libclamav/CMakeFiles/clamav.dir/table.c.o [ 53%] Building C object libclamav/CMakeFiles/clamav.dir/text.c.o [ 53%] Building C object libclamav/CMakeFiles/clamav.dir/uniq.c.o [ 54%] Building C object libclamav/CMakeFiles/clamav.dir/www.c.o [ 54%] Building C object libclamav/CMakeFiles/clamav.dir/disasm.c.o [ 54%] Building C object libclamav/CMakeFiles/clamav.dir/filtering.c.o [ 54%] Building C object libclamav/CMakeFiles/clamav.dir/matcher-ac.c.o [ 55%] Building C object libclamav/CMakeFiles/clamav.dir/matcher-bm.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/filtering.c: In function 'filter_add_static': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/filtering.c:213:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (j + 2 > len) ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/matcher.h:29:0, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:22, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/disasm.c:30: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/disasm.c: In function 'cli_disasm_one': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:647:48: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_writeint32(offset, value) (((union unaligned_32 *)(offset))->una_u32 = (uint32_t)(value)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/disasm.c:1742:17: note: in expansion of macro 'cli_writeint32' cli_writeint32(&w->arg[i][6], s.args[i].arg.marg.disp); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:647:48: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_writeint32(offset, value) (((union unaligned_32 *)(offset))->una_u32 = (uint32_t)(value)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/disasm.c:1747:17: note: in expansion of macro 'cli_writeint32' cli_writeint32(&w->arg[i][2], s.args[i].arg.q); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:647:48: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_writeint32(offset, value) (((union unaligned_32 *)(offset))->una_u32 = (uint32_t)(value)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/disasm.c:1748:17: note: in expansion of macro 'cli_writeint32' cli_writeint32(&w->arg[i][6], s.args[i].arg.q >> 32); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/filtering.c: In function 'filter_add_acpatt': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/filtering.c:357:8: warning: 'base' may be used uninitialized in this function [-Wmaybe-uninitialized] if (base < 0) { ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/filtering.c:326:13: note: 'base' was declared here int32_t base; ^ [ 55%] Building C object libclamav/CMakeFiles/clamav.dir/matcher-byte-comp.c.o [ 55%] Building C object libclamav/CMakeFiles/clamav.dir/matcher-hash.c.o [ 55%] Building C object libclamav/CMakeFiles/clamav.dir/matcher-pcre.c.o [ 56%] Building C object libclamav/CMakeFiles/clamav.dir/matcher.c.o [ 56%] Building C object libclamav/CMakeFiles/clamav.dir/regex_pcre.c.o [ 56%] Building C object libclamav/CMakeFiles/clamav.dir/cvd.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/cvd.c: In function 'cli_cvdload': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/cvd.c:661:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (cvd.stime > s_time) { ^ [ 56%] Building C object libclamav/CMakeFiles/clamav.dir/dconf.c.o [ 57%] Building C object libclamav/CMakeFiles/clamav.dir/dsig.c.o [ 57%] Building C object libclamav/CMakeFiles/clamav.dir/readdb.c.o [ 57%] Building C object libclamav/CMakeFiles/clamav.dir/cache.c.o [ 58%] Building C object libclamav/CMakeFiles/clamav.dir/crtmgr.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/readdb.c: In function 'cli_dbgets': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/readdb.c:1063:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (nl - dbio->bufpt >= size) { ^ [ 58%] Building C object libclamav/CMakeFiles/clamav.dir/crypto.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/crtmgr.c: In function 'cli_crt_clear': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/crtmgr.c:56:29: warning: unused parameter 'x509' [-Wunused-parameter] void cli_crt_clear(cli_crt *x509) ^ [ 58%] Building C object libclamav/CMakeFiles/clamav.dir/filetypes.c.o [ 58%] Building C object libclamav/CMakeFiles/clamav.dir/fmap.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/readdb.c: In function 'lsigattribs': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/readdb.c:1929:20: warning: 'apt' may be used uninitialized in this function [-Wmaybe-uninitialized] switch (apt->type) { ^ [ 59%] Building C object libclamav/CMakeFiles/clamav.dir/mpool.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/fmap.c: In function 'cl_fmap_open_handle': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/fmap.c:360:9: warning: comparison is always false due to limited range of data type [-Wtype-limits] if ((off_t)offset < 0 || offset != fmap_align_to(offset, pgsz)) { ^ [ 59%] Building C object libclamav/CMakeFiles/clamav.dir/others.c.o [ 59%] Building C object libclamav/CMakeFiles/clamav.dir/perflogging.c.o [ 59%] Building C object libclamav/CMakeFiles/clamav.dir/scanners.c.o [ 60%] Building C object libclamav/CMakeFiles/clamav.dir/textdet.c.o [ 60%] Building C object libclamav/CMakeFiles/clamav.dir/version.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/scanners.c: In function 'calculate_fuzzy_image_hash': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/scanners.c:4062:5: warning: missing braces around initializer [-Wmissing-braces] image_fuzzy_hash_t hash = {0}; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/scanners.c:4062:5: warning: (near initialization for 'hash.hash') [-Wmissing-braces] [ 60%] Building C object libclamav/CMakeFiles/clamav.dir/htmlnorm.c.o [ 60%] Building C object libclamav/CMakeFiles/clamav.dir/jsparse/js-norm.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/jsparse/js-norm.c: In function 'cli_js_process_buffer': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/jsparse/js-norm.c:1013:5: warning: missing braces around initializer [-Wmissing-braces] YYSTYPE val = {0}; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/jsparse/js-norm.c:1013:5: warning: (near initialization for 'val.val') [-Wmissing-braces] /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/jsparse/js-norm.c:1013:5: warning: missing initializer for field 'type' of 'yystype' [-Wmissing-field-initializers] In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/jsparse/js-norm.c:39:0: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/jsparse/lexglobal.h:118:21: note: 'type' declared here enum token_type type; ^ [ 61%] Building C object libclamav/CMakeFiles/clamav.dir/textnorm.c.o [ 61%] Building C object libclamav/CMakeFiles/clamav.dir/partition_intersection.c.o [ 61%] Building C object libclamav/CMakeFiles/clamav.dir/special.c.o [ 61%] Building C object libclamav/CMakeFiles/clamav.dir/hostid_internal.c.o [ 62%] Building C object libclamav/CMakeFiles/clamav.dir/stats_json.c.o [ 62%] Building C object libclamav/CMakeFiles/clamav.dir/stats.c.o [ 62%] Building C object libclamav/CMakeFiles/clamav.dir/bytecode_api_decl.c.o [ 62%] Building C object libclamav/CMakeFiles/clamav.dir/bytecode_api.c.o [ 63%] Building C object libclamav/CMakeFiles/clamav.dir/bytecode_detect.c.o [ 63%] Building C object libclamav/CMakeFiles/clamav.dir/bytecode_vm.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/stats.c: In function 'clamav_stats_get_hostid': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/stats.c:578:19: warning: unused variable 'i' [-Wunused-variable] size_t bufsz, i; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/stats.c:578:12: warning: unused variable 'bufsz' [-Wunused-variable] size_t bufsz, i; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/stats.c:575:11: warning: unused variable 'sysctls' [-Wunused-variable] char *sysctls[] = { ^ [ 63%] Building C object libclamav/CMakeFiles/clamav.dir/bytecode.c.o [ 63%] Building C object libclamav/CMakeFiles/clamav.dir/events.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c: In function 'cli_stack_alloc': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:161:9: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] *(uint16_t *)&chunk->u.data[chunk->used + last_size_off] = stack->last_size; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:180:5: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] *(uint16_t *)&chunk->u.data[last_size_off] = stack->last_size; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c: In function 'cli_stack_free': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:202:5: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] last_size = *(uint16_t *)&chunk->u.data[chunk->used - 2]; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c: In function 'cli_vm_execute': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:740:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ADD, res = op0 + op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:741:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SUB, res = op0 - op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:742:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_MUL, res = op0 * op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:744:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UDIV, CHECK_OP(op1 == 0, "bytecode attempted to execute udiv#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:748:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_UREM, CHECK_OP(op1 == 0, "bytecode attempted to execute urem#0\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:753:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_SHL, CHECK_OP(op1 > inst->type, "bytecode attempted to execute shl greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:755:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_LSHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute lshr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:757:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ASHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute ashr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:757:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ASHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute ashr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:757:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ASHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute ashr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:757:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ASHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute ashr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:757:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_ASHR, CHECK_OP(op1 > inst->type, "bytecode attempted to execute ashr greater than bitwidth\n"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:760:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_AND, res = op0 & op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:761:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_OR, res = op0 | op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:440:31: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_BINOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE16, WRITE32, WRITE64) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:762:13: note: in expansion of macro 'DEFINE_BINOP' DEFINE_BINOP(OP_BC_XOR, res = op0 ^ op1); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:520:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] R0(tmp, inst->u.unaryop); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:800:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:527:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] W0(ret, tmp); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:800:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:520:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] R0(tmp, inst->u.unaryop); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:801:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5 + 1, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:527:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] W0(ret, tmp); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:801:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5 + 1, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:520:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] R0(tmp, inst->u.unaryop); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:802:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5 + 2, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:527:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] W0(ret, tmp); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:802:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5 + 2, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:520:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] R0(tmp, inst->u.unaryop); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:803:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5 + 3, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:527:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] W0(ret, tmp); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:803:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5 + 3, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:520:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] R0(tmp, inst->u.unaryop); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:804:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5 + 4, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:527:15: warning: left-hand operand of comma expression has no effect [-Wunused-value] W0(ret, tmp); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:804:13: note: in expansion of macro 'DEFINE_OP_BC_RET_N' DEFINE_OP_BC_RET_N(OP_BC_RET_VOID * 5 + 4, uint8_t, (void), (void)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:806:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_EQ, res = (op0 == op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:807:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_NE, res = (op0 != op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:808:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGT, res = (op0 > op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:809:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_UGE, res = (op0 >= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:810:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULT, res = (op0 < op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:386:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:22: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:397:16: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int8_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:408:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int16_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:419:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int32_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:23: warning: variable 'sop1' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:430:17: warning: variable 'sop0' set but not used [-Wunused-but-set-variable] int64_t sop0, sop1; \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:441:32: note: in expansion of macro 'DEFINE_BINOP_BC_HELPER' #define DEFINE_ICMPOP(opc, OP) DEFINE_BINOP_BC_HELPER(opc, OP, WRITE8, WRITE8, WRITE8, WRITE8, WRITE8) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/bytecode_vm.c:811:13: note: in expansion of macro 'DEFINE_ICMPOP' DEFINE_ICMPOP(OP_BC_ICMP_ULE, res = (op0 <= op1)); ^ [ 64%] Building C object libclamav/CMakeFiles/clamav.dir/7z_iface.c.o [ 64%] Building C object libclamav/CMakeFiles/clamav.dir/explode.c.o [ 64%] Building C object libclamav/CMakeFiles/clamav.dir/inflate64.c.o [ 64%] Building C object libclamav/CMakeFiles/clamav.dir/lzma_iface.c.o [ 65%] Building C object libclamav/CMakeFiles/clamav.dir/lzw/lzwdec.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/lzw/lzwdec.c: In function 'lzwInflate': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/lzw/lzwdec.c:251:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (residue > left) { ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/lzw/lzwdec.c:261:32: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] } while (--residue > left); ^ [ 65%] Building C object libclamav/CMakeFiles/clamav.dir/xz_iface.c.o [ 65%] Building C object libclamav/CMakeFiles/clamav.dir/arc4.c.o [ 66%] Building C object libclamav/CMakeFiles/clamav.dir/rijndael.c.o [ 66%] Building C object libclamav/CMakeFiles/clamav.dir/entconv.c.o [ 66%] Building C object libclamav/CMakeFiles/clamav.dir/dlp.c.o [ 66%] Building C object libclamav/CMakeFiles/clamav.dir/autoit.c.o [ 67%] Building C object libclamav/CMakeFiles/clamav.dir/binhex.c.o [ 67%] Building C object libclamav/CMakeFiles/clamav.dir/cpio.c.o [ 67%] Building C object libclamav/CMakeFiles/clamav.dir/ishield.c.o [ 67%] Building C object libclamav/CMakeFiles/clamav.dir/libmspack.c.o [ 68%] Building C object libclamav/CMakeFiles/clamav.dir/msexpand.c.o [ 68%] Building C object libclamav/CMakeFiles/clamav.dir/nsis/bzlib.c.o [ 68%] Building C object libclamav/CMakeFiles/clamav.dir/nsis/infblock.c.o [ 68%] Building C object libclamav/CMakeFiles/clamav.dir/nsis/nulsft.c.o In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/matcher.h:29:0, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:22, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/nsis/nulsft.c:35: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/nsis/nulsft.c: In function 'nsis_unpack_next': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/nsis/nulsft.c:365:16: note: in expansion of macro 'cli_readint32' size = cli_readint32(obuf); ^ [ 69%] Building C object libclamav/CMakeFiles/clamav.dir/hwp.c.o [ 69%] Building C object libclamav/CMakeFiles/clamav.dir/msdoc.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/hwp.c: In function 'hwp3_cb': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/hwp.c:1737:28: warning: 'entry' may be used uninitialized in this function [-Wmaybe-uninitialized] cli_jsonstr(entry, "Type", "Press Frame Information Field Name"); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/hwp.c:1528:51: note: 'entry' was declared here json_object *infoblk_1, *contents, *counter, *entry; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/hwp.c:1565:15: warning: 'contents' may be used uninitialized in this function [-Wmaybe-uninitialized] entry = cli_jsonobj(contents, NULL); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/hwp.c:1528:30: note: 'contents' was declared here json_object *infoblk_1, *contents, *counter, *entry; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/hwp.c:1809:24: warning: 'fonts' may be used uninitialized in this function [-Wmaybe-uninitialized] cli_jsonint(fonts, NULL, nfonts); ^ [ 69%] Building C object libclamav/CMakeFiles/clamav.dir/msxml_parser.c.o [ 69%] Building C object libclamav/CMakeFiles/clamav.dir/msxml.c.o [ 70%] Building C object libclamav/CMakeFiles/clamav.dir/ole2_extract.c.o [ 70%] Building C object libclamav/CMakeFiles/clamav.dir/xlm_extract.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c: In function 'cli_ole2_get_property_name2': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:268:13: warning: comparison is always true due to limited range of data type [-Wtype-limits] if (name[i] < 10 && name[i] >= 0 && name[i + 1] == 0) { ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c: In function 'handler_otf_encrypted': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:1753:5: warning: passing argument 1 of 'rijndaelSetupDecrypt' from incompatible pointer type [enabled by default] nrounds = rijndaelSetupDecrypt(rk, key->key, key->key_length_bits); ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:56:0: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rijndael.h:4:5: note: expected 'long unsigned int *' but argument is of type 'uint64_t *' int rijndaelSetupDecrypt(unsigned long *rk, const unsigned char *key, int keybits); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:1839:17: warning: passing argument 1 of 'rijndaelDecrypt' from incompatible pointer type [enabled by default] rijndaelDecrypt(rk, nrounds, &(buff[writeIdx]), &(decryptDst[decryptDstIdx])); ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:56:0: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rijndael.h:5:6: note: expected 'const long unsigned int *' but argument is of type 'uint64_t *' void rijndaelDecrypt(const unsigned long *rk, int nrounds, const unsigned char ciphertext[16], unsigned char plaintext[16]); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c: In function 'aes_128ecb_decrypt': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:2156:5: warning: passing argument 1 of 'rijndaelSetupDecrypt' from incompatible pointer type [enabled by default] nrounds = rijndaelSetupDecrypt(rk, (const unsigned char *)key->key, key->key_length_bits); ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:56:0: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rijndael.h:4:5: note: expected 'long unsigned int *' but argument is of type 'uint64_t *' int rijndaelSetupDecrypt(unsigned long *rk, const unsigned char *key, int keybits); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:2163:13: warning: passing argument 1 of 'rijndaelDecrypt' from incompatible pointer type [enabled by default] rijndaelDecrypt(rk, nrounds, &(in[i]), &(out[i])); ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:56:0: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rijndael.h:5:6: note: expected 'const long unsigned int *' but argument is of type 'uint64_t *' void rijndaelDecrypt(const unsigned long *rk, int nrounds, const unsigned char ciphertext[16], unsigned char plaintext[16]); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c: In function 'initialize_encryption_key': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/ole2_extract.c:2391:9: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] if (((uint16_t *)&(headerPtr->encryptionInfo.cspName[idx]))[0] == 0) { ^ [ 70%] Building C object libclamav/CMakeFiles/clamav.dir/ooxml.c.o [ 70%] Building C object libclamav/CMakeFiles/clamav.dir/rtf.c.o [ 71%] Building C object libclamav/CMakeFiles/clamav.dir/vba_extract.c.o [ 71%] Building C object libclamav/CMakeFiles/clamav.dir/asn1.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rtf.c: In function 'push_state': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rtf.c:159:12: warning: variable 'defelements' set but not used [-Wunused-but-set-variable] size_t defelements; ^ In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/matcher.h:29:0, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:22, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rtf.c:37: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rtf.c: In function 'rtf_object_process': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:647:48: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_writeint32(offset, value) (((union unaligned_32 *)(offset))->una_u32 = (uint32_t)(value)) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/rtf.c:416:25: note: in expansion of macro 'cli_writeint32' cli_writeint32(out, data->desc_len); ^ [ 71%] Building C object libclamav/CMakeFiles/clamav.dir/elf.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/vba_extract.c: In function 'get_unicode_name': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/vba_extract.c:130:13: warning: comparison is always true due to limited range of data type [-Wtype-limits] if ((name[i] < 10) && (name[i] >= 0)) { ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/vba_extract.c:137:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] x = (uint16_t)((name[i] < 0 ? 0 : name[i] << 8) | name[i + 1]); ^ [ 71%] Building C object libclamav/CMakeFiles/clamav.dir/execs.c.o [ 72%] Building C object libclamav/CMakeFiles/clamav.dir/macho.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/macho.c: In function 'cli_scanmacho_unibin': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/macho.c:566:29: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (fat_arch.offset < at) { ^ [ 72%] Building C object libclamav/CMakeFiles/clamav.dir/pe_icons.c.o [ 72%] Building C object libclamav/CMakeFiles/clamav.dir/pe.c.o [ 72%] Building C object libclamav/CMakeFiles/clamav.dir/rebuildpe.c.o [ 73%] Building C object libclamav/CMakeFiles/clamav.dir/aspack.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c: In function 'hash_imptbl': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:2410:12: warning: missing braces around initializer [-Wmissing-braces] struct pe_image_import_descriptor image = {0}; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:2410:12: warning: (near initialization for 'image.u') [-Wmissing-braces] /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:2410:12: warning: missing initializer for field 'TimeDateStamp' of 'struct pe_image_import_descriptor' [-Wmissing-field-initializers] /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:256:14: note: 'TimeDateStamp' declared here uint32_t TimeDateStamp; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c: In function 'cli_scanpe': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:3443:45: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] cli_readint32(epbuff + 1) > EC32(peinfo->pe_opt.opt32.ImageBase) && ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c: In function 'cli_peheader': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:5158:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint32_t' [-Wformat=] cli_dbgmsg("cli_peheader: PE Section %zu raw+rsz extends past the end of the file by %lu bytes\n", section_pe_idx, (section->raw + section->rsz) - fsize); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:5163:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint32_t' [-Wformat=] cli_dbgmsg("cli_peheader: PE Section %zu uraw+ursz extends past the end of the file by %lu bytes\n", section_pe_idx, (section->uraw + section->ursz) - fsize); ^ [ 73%] Building C object libclamav/CMakeFiles/clamav.dir/fsg.c.o [ 73%] Building C object libclamav/CMakeFiles/clamav.dir/mew.c.o [ 74%] Building C object libclamav/CMakeFiles/clamav.dir/packlibs.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/mew.c: In function 'mew_lzma': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/mew.c:343:16: warning: variable 'var30' set but not used [-Wunused-but-set-variable] char var1, var30; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/mew.c: In function 'unmew11': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/mew.c:792:20: warning: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'unsigned int' [-Wformat=] (size_t)src, (size_t)off, SIZE_MAX); ^ [ 74%] Building C object libclamav/CMakeFiles/clamav.dir/petite.c.o [ 74%] Building C object libclamav/CMakeFiles/clamav.dir/spin.c.o In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/matcher.h:29:0, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:22, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:66: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:66: warning: 'opt64' may be used uninitialized in this function [-Wmaybe-uninitialized] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/pe.c:4511:37: note: 'opt64' was declared here struct pe_image_optional_hdr64 *opt64; ^ [ 74%] Building C object libclamav/CMakeFiles/clamav.dir/unsp.c.o [ 75%] Building C object libclamav/CMakeFiles/clamav.dir/upack.c.o [ 75%] Building C object libclamav/CMakeFiles/clamav.dir/upx.c.o [ 75%] Building C object libclamav/CMakeFiles/clamav.dir/wwunpack.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/wwunpack.c: In function 'wwunpack': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/wwunpack.c:114:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (ccur - compd >= szd || !CLI_ISCONTAINED(exe, exesz, ucur, 1)) ^ [ 75%] Building C object libclamav/CMakeFiles/clamav.dir/yc.c.o [ 76%] Building C object libclamav/CMakeFiles/clamav.dir/line.c.o [ 76%] Building C object libclamav/CMakeFiles/clamav.dir/mbox.c.o [ 76%] Building C object libclamav/CMakeFiles/clamav.dir/message.c.o [ 76%] Building C object libclamav/CMakeFiles/clamav.dir/phish_domaincheck_db.c.o [ 77%] Building C object libclamav/CMakeFiles/clamav.dir/phish_allow_list.c.o [ 77%] Building C object libclamav/CMakeFiles/clamav.dir/phishcheck.c.o [ 77%] Building C object libclamav/CMakeFiles/clamav.dir/regex_list.c.o [ 77%] Building C object libclamav/CMakeFiles/clamav.dir/regex_suffix.c.o [ 78%] Building C object libclamav/CMakeFiles/clamav.dir/sis.c.o [ 78%] Building C object libclamav/CMakeFiles/clamav.dir/tnef.c.o [ 78%] Building C object libclamav/CMakeFiles/clamav.dir/uuencode.c.o In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/matcher.h:29:0, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:22, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:42: /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c: In function 'real_scansis': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:372:9: note: in expansion of macro 'GETD2' GETD2(pkgtype); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:384:17: note: in expansion of macro 'GETD2' GETD2(ftype); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:385:17: note: in expansion of macro 'GETD2' GETD2(options); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:386:17: note: in expansion of macro 'GETD2' GETD2(ssname); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:387:17: note: in expansion of macro 'GETD2' GETD2(psname); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:388:17: note: in expansion of macro 'GETD2' GETD2(sdname); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:389:17: note: in expansion of macro 'GETD2' GETD2(pdname); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:442:21: note: in expansion of macro 'GETD2' GETD2(lens[j]); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:444:21: note: in expansion of macro 'GETD2' GETD2(ptrs[j]); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:446:21: note: in expansion of macro 'GETD2' GETD2(olens[j]); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:540:17: note: in expansion of macro 'GETD2' GETD2(fcount); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:545:17: note: in expansion of macro 'GETD2' GETD2(fcount); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:158:15: note: in expansion of macro 'cli_readint32' VAR = cli_readint32(&buff[smax - sleft]); \ ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:549:17: note: in expansion of macro 'GETD2' GETD2(fcount); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c: In function 'getd': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/others.h:645:44: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] #define cli_readint32(buff) (((const union unaligned_32 *)(buff))->una_s32) ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/sis.c:657:10: note: in expansion of macro 'cli_readint32' *v = cli_readint32(&s->buff[s->smax - s->sleft]); ^ [ 78%] Building C object libclamav/CMakeFiles/clamav.dir/swf.c.o [ 79%] Building C object libclamav/CMakeFiles/clamav.dir/pdf.c.o [ 79%] Building C object libclamav/CMakeFiles/clamav.dir/pdfng.c.o [ 79%] Building C object libclamav/CMakeFiles/clamav.dir/pdfdecode.c.o [ 79%] Building C object libclamav/CMakeFiles/clamav.dir/xdp.c.o [ 80%] Building C object libclamav/CMakeFiles/clamav.dir/unarj.c.o [ 80%] Building C object libclamav/CMakeFiles/clamav.dir/is_tar.c.o [ 80%] Building C object libclamav/CMakeFiles/clamav.dir/untar.c.o [ 81%] Building C object libclamav/CMakeFiles/clamav.dir/unzip.c.o [ 81%] Building C object libclamav/CMakeFiles/clamav.dir/adc.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/unarj.c: In function 'cli_unarj_prepare_file': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/unarj.c:1090:26: warning: 'comment' may be used uninitialized in this function [-Wmaybe-uninitialized] text_normalize_buffer(&comstate, (const unsigned char *)comment, comment_len); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/unarj.c:975:28: note: 'comment' was declared here const char *filename, *comment; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/unarj.c:1094:37: warning: 'filename' may be used uninitialized in this function [-Wmaybe-uninitialized] metadata->filename = CLI_STRNDUP(filename, filename_len); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/unarj.c:975:17: note: 'filename' was declared here const char *filename, *comment; ^ [ 81%] Building C object libclamav/CMakeFiles/clamav.dir/dmg.c.o [ 81%] Building C object libclamav/CMakeFiles/clamav.dir/xar.c.o [ 82%] Building C object libclamav/CMakeFiles/clamav.dir/egg.c.o [ 82%] Building C object libclamav/CMakeFiles/clamav.dir/mbr.c.o [ 82%] Building C object libclamav/CMakeFiles/clamav.dir/gpt.c.o [ 82%] Building C object libclamav/CMakeFiles/clamav.dir/apm.c.o [ 83%] Building C object libclamav/CMakeFiles/clamav.dir/hfsplus.c.o [ 83%] Building C object libclamav/CMakeFiles/clamav.dir/iso9660.c.o [ 83%] Building C object libclamav/CMakeFiles/clamav.dir/openioc.c.o [ 83%] Building C object libclamav/CMakeFiles/clamav.dir/jpeg.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/jpeg.c: In function 'cli_parsejpeg': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libclamav/jpeg.c:628:27: warning: 'marker' may be used uninitialized in this function [-Wmaybe-uninitialized] cli_dbgmsg(" Start of Frame (S0F) %02x\n", (uint8_t)marker); ^ [ 84%] Building C object libclamav/CMakeFiles/clamav.dir/png.c.o [ 84%] Building C object libclamav/CMakeFiles/clamav.dir/tiff.c.o [ 84%] Building C object libclamav/CMakeFiles/clamav.dir/gif.c.o [ 84%] Linking C shared library libclamav.so make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 84%] Built target clamav make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 84%] Building C object common/CMakeFiles/common.dir/cert_util.c.o [ 84%] Building C object common/CMakeFiles/common.dir/clamdcom.c.o [ 84%] Building C object common/CMakeFiles/common.dir/actions.c.o [ 85%] Building C object common/CMakeFiles/common.dir/getopt.c.o [ 85%] Building C object common/CMakeFiles/common.dir/hostid.c.o [ 85%] Building C object common/CMakeFiles/common.dir/idmef_logging.c.o [ 85%] Building C object common/CMakeFiles/common.dir/misc.c.o [ 86%] Building C object common/CMakeFiles/common.dir/optparser.c.o [ 86%] Building C object common/CMakeFiles/common.dir/output.c.o [ 86%] Building C object common/CMakeFiles/common.dir/tar.c.o [ 86%] Building C object common/CMakeFiles/common.dir/linux/cert_util_linux.c.o [ 87%] Linking C static library libcommon.a make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 87%] Built target common make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 87%] Building C object libfreshclam/CMakeFiles/freshclam.dir/libfreshclam.c.o [ 87%] Building C object clamconf/CMakeFiles/clamconf.dir/clamconf.c.o [ 87%] Building C object clamdscan/CMakeFiles/clamdscan.dir/clamdscan.c.o [ 87%] Building C object clamd/CMakeFiles/clamd.dir/clamd.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam.c: In function 'fc_update_database': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam.c:625:35: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (attempt = 1; attempt <= g_maxAttempts; attempt++) { ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam.c:633:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] attempt == g_maxAttempts ? 1 : 0, ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam.c:650:33: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (attempt < g_maxAttempts) { ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam.c: In function 'fc_download_url_database': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam.c:852:31: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (attempt = 1; attempt <= g_maxAttempts; attempt++) { ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam.c:858:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] attempt == g_maxAttempts ? 1 : 0, ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam.c:875:29: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (attempt < g_maxAttempts) { ^ [ 88%] Building C object clamdscan/CMakeFiles/clamdscan.dir/client.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamdscan/client.c: In function 'ping_clamd': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamdscan/client.c:242:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_DEBUG, "Could not connect, will try again in %lu second\n", interval); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamdscan/client.c:244:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_DEBUG, "Could not connect, will try again in %lu seconds\n", interval); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamdscan/client.c:247:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_INFO, "Could not connect, will PING again in %lu second\n", interval); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamdscan/client.c:249:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_INFO, "Could not connect, will PING again in %lu seconds\n", interval); ^ [ 88%] Building C object libfreshclam/CMakeFiles/freshclam.dir/libfreshclam_internal.c.o [ 89%] Linking C executable clamconf [ 89%] Building C object clamd/CMakeFiles/clamd.dir/clamd_others.c.o [ 89%] Building C object clamdscan/CMakeFiles/clamdscan.dir/proto.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 89%] Built target clamconf [ 89%] Building C object clamd/CMakeFiles/clamd.dir/localserver.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam_internal.c: In function 'load_freshclam_dat': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam_internal.c:221:17: warning: format '%ld' expects argument of type 'long int', but argument 4 has type 'off_t' [-Wformat=] logg(LOGG_DEBUG, "freshclam.dat is bigger than expected: %zu != %ld\n", sizeof(freshclam_dat_v1_t), file_size); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/libfreshclam/libfreshclam_internal.c:229:17: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' [-Wformat=] logg(LOGG_ERROR, "Can't seek to %lu, error: %s\n", strlen(MIRRORS_DAT_MAGIC), error_message); ^ [ 89%] Building C object libfreshclam/CMakeFiles/freshclam.dir/dns.c.o [ 89%] Linking C executable clamdscan [ 90%] Building C object clamd/CMakeFiles/clamd.dir/scanner.c.o [ 90%] Building C object clamd/CMakeFiles/clamd.dir/server-th.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 90%] Built target clamdscan [ 90%] Building C object clamd/CMakeFiles/clamd.dir/session.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamd/server-th.c: In function 'handle_stream': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamd/server-th.c:858:36: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (buf->chunksize > buf->quota) { ^ make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 91%] Building C object clamonacc/CMakeFiles/clamonacc.dir/clamonacc.c.o [ 91%] Building C object clamonacc/CMakeFiles/clamonacc.dir/c-thread-pool/thpool.c.o [ 92%] Linking C shared library libfreshclam.so [ 92%] Building C object clamd/CMakeFiles/clamd.dir/tcpserver.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 92%] Built target freshclam [ 93%] Building C object clamd/CMakeFiles/clamd.dir/thrmgr.c.o [ 93%] Building C object clamonacc/CMakeFiles/clamonacc.dir/client/client.c.o make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 93%] Building C object clamscan/CMakeFiles/clamscan.dir/clamscan.c.o [ 93%] Building C object clamscan/CMakeFiles/clamscan.dir/manager.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/client.c: In function 'onas_ping_clamd': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/client.c:262:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_DEBUG, "Will try again in %lu second\n", interval); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/client.c:264:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_DEBUG, "Will try again in %lu seconds\n", interval); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/client.c:267:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_INFO, "PINGing again in %lu second\n", interval); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/client.c:269:21: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_INFO, "PINGing again in %lu seconds\n", interval); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/client.c: In function 'onas_setup_client': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/client.c:409:29: warning: unused variable 'opt' [-Wunused-variable] const struct optstruct *opt; ^ [ 94%] Building C object clamonacc/CMakeFiles/clamonacc.dir/client/communication.c.o [ 94%] Linking C executable clamd make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 94%] Building C object sigtool/CMakeFiles/sigtool.dir/sigtool.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 94%] Built target clamd [ 95%] Building C object sigtool/CMakeFiles/sigtool.dir/vba.c.o [ 95%] Building C object clamonacc/CMakeFiles/clamonacc.dir/client/protocol.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/sigtool.c: In function 'fuzzy_img_file': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/sigtool.c:343:5: warning: missing braces around initializer [-Wmissing-braces] image_fuzzy_hash_t hash = {0}; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/sigtool.c:343:5: warning: (near initialization for 'hash.hash') [-Wmissing-braces] /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/sigtool.c: In function 'decodehex': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/sigtool.c:2595:13: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] (void)write(1, decoded, dlen); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/sigtool.c:2676:13: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] (void)write(1, decoded, dlen); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/sigtool.c:2688:9: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] (void)write(1, decoded, dlen); ^ [ 96%] Linking C executable clamscan /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/vba.c: In function 'get_unicode_name': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/vba.c:216:13: warning: comparison is always true due to limited range of data type [-Wtype-limits] if (name[i] < 10 && name[i] >= 0) { ^ make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 96%] Building C object clambc/CMakeFiles/clambc.dir/bcrun.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 96%] Built target clamscan [ 96%] Building C object clamonacc/CMakeFiles/clamonacc.dir/client/socket.c.o make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 96%] Building C object clamsubmit/CMakeFiles/clamsubmit.dir/clamsubmit.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/sigtool/sigtool.c:2530:50: warning: 'rlen' may be used uninitialized in this function [-Wmaybe-uninitialized] strncpy(cflags, hexsig + tlen + rlen + 2, clen); ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/socket.c: In function 'onas_set_sock_only_once': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/socket.c:50:29: warning: unused variable 'opt' [-Wunused-variable] const struct optstruct *opt; ^ /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/client/socket.c:47:57: warning: unused parameter 'ctx' [-Wunused-parameter] cl_error_t onas_set_sock_only_once(struct onas_context *ctx) ^ [ 96%] Building C object clamonacc/CMakeFiles/clamonacc.dir/fanotif/fanotif.c.o [ 96%] Linking C executable clambc make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 96%] Built target clambc [ 97%] Building C object clamonacc/CMakeFiles/clamonacc.dir/inotif/inotif.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/fanotif/fanotif.c: In function 'onas_setup_fanotif': /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/fanotif/fanotif.c:144:9: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=] logg(LOGG_DEBUG, "ClamFanotif: max file size limited to %lu bytes\n", (*ctx)->sizelimit); ^ [ 97%] Linking C executable clamsubmit make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 97%] Building C object freshclam/CMakeFiles/freshclam-bin.dir/freshclam.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 97%] Built target clamsubmit [ 97%] Building C object freshclam/CMakeFiles/freshclam-bin.dir/execute.c.o make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 97%] Building C object clamdtop/CMakeFiles/clamdtop.dir/clamdtop.c.o /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamdtop/clamdtop.c:23:0: warning: "_GNU_SOURCE" redefined [enabled by default] #define _GNU_SOURCE ^ :0:0: note: this is the location of the previous definition [ 97%] Building C object clamonacc/CMakeFiles/clamonacc.dir/inotif/hash.c.o [ 97%] Linking C executable sigtool In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/inotif/../misc/priv_fts.h:4:0, from /home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/clamonacc/inotif/hash.c:57: /home/buildroot/autobuild/run/instance-1/output-1/per-package/clamav/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/fts.h:41:3: error: #error " cannot be used with -D_FILE_OFFSET_BITS==64" # error " cannot be used with -D_FILE_OFFSET_BITS==64" ^ clamonacc/CMakeFiles/clamonacc.dir/build.make:187: recipe for target 'clamonacc/CMakeFiles/clamonacc.dir/inotif/hash.c.o' failed make[3]: *** [clamonacc/CMakeFiles/clamonacc.dir/inotif/hash.c.o] Error 1 make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' CMakeFiles/Makefile2:901: recipe for target 'clamonacc/CMakeFiles/clamonacc.dir/all' failed make[2]: *** [clamonacc/CMakeFiles/clamonacc.dir/all] Error 2 make[2]: *** Waiting for unfinished jobs.... [ 97%] Building C object freshclam/CMakeFiles/freshclam-bin.dir/notify.c.o make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 97%] Built target sigtool [ 98%] Linking C executable freshclam make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 98%] Built target freshclam-bin [ 99%] Linking C executable clamdtop make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' [ 99%] Built target clamdtop make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' Makefile:155: recipe for target 'all' failed make[1]: *** [all] Error 2 make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1' package/pkg-generic.mk:290: recipe for target '/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/.stamp_built' failed make: *** [/home/buildroot/autobuild/run/instance-1/output-1/build/clamav-1.0.1/.stamp_built] Error 2 make: Leaving directory '/home/buildroot/autobuild/run/instance-1/buildroot'