>>> collectd 5.11.0 Extracting bzcat /home/buildroot/autobuild/run/instance-2/dl/collectd/collectd-5.11.0.tar.bz2 | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0 -xf - >>> collectd 5.11.0 Patching >>> collectd 5.11.0 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0 -name $file); do cp support/gnuconfig/$file $i; done; done >>> collectd 5.11.0 Patching libtool patching file /home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0/build-aux/ltmain.sh Hunk #1 succeeded at 2786 (offset 99 lines). Hunk #2 succeeded at 4376 (offset 99 lines). Hunk #3 succeeded at 6671 (offset 117 lines). Hunk #4 succeeded at 6681 (offset 117 lines). Hunk #5 succeeded at 6974 (offset 117 lines). Hunk #6 succeeded at 7266 (offset 117 lines). Hunk #7 succeeded at 8239 (offset 127 lines). Hunk #8 succeeded at 10871 (offset 161 lines). >>> collectd 5.11.0 Configuring (cd /home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ar" AS="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-as" LD="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld" NM="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-nm" CC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc" GCC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc" CPP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-cpp" CXX="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++" FC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gfortran" F77="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ranlib" READELF="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-readelf" STRIP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no gt_cv_func_gnugettext1_libc=yes gt_cv_func_gnugettext2_libc=yes ac_cv_lib_yajl_yajl_alloc=yes LIBS="-lm" CONFIG_SITE=/dev/null ./configure --target=riscv64-buildroot-linux-musl --host=riscv64-buildroot-linux-musl --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-nan-emulation --with-fp-layout=nothing --with-perl-bindings=no --disable-werror --disable-apple_sensors --disable-aquaero --disable-ascent --disable-barometer --disable-dbi --disable-dpdkstat --disable-email --disable-gmond --disable-hddtemp --disable-intel_rdt --disable-ipmi --disable-java --disable-lpar --disable-madwifi --disable-mbmon --disable-mic --disable-multimeter --disable-netapp --disable-notify_desktop --disable-numa --disable-nut --disable-oracle --disable-perl --disable-pf --disable-pinba --disable-powerdns --disable-python --disable-routeros --disable-rrdcached --disable-sigrok --disable-tape --disable-target_v5upgrade --disable-teamspeak2 --disable-ted --disable-tokyotyrant --disable-turbostat --disable-uuid --disable-varnish --disable-virt --disable-vserver --disable-write_kafka --disable-write_mongodb --disable-xencpu --disable-xmms --disable-zfs_arc --disable-zone --disable-aggregation --disable-amqp --disable-apache --disable-apcups --disable-battery --disable-bind --enable-ceph --enable-chrony --disable-cgroups --disable-conntrack --disable-contextswitch --disable-cpu --disable-cpufreq --disable-cpusleep --disable-csv --enable-curl --disable-curl_json --disable-curl_xml --enable-df --disable-disk --disable-dns --disable-drbd --enable-match_empty_counter --disable-entropy --disable-ethstat --disable-exec --disable-fhcount --disable-filecount --enable-fscache --disable-gps --disable-write_graphite --disable-grpc --disable-match_hashed --disable-hugepages --disable-interface --disable-ipc --disable-iptables --enable-ipvs --disable-irq --enable-load --disable-logfile --disable-log_logstash --enable-lua --disable-md --disable-memcachec --disable-memcached --disable-memory --disable-modbus --disable-mqtt --disable-mysql --enable-netlink --disable-network --disable-nfs --disable-nginx --disable-target_notification --disable-notify_email --disable-notify_nagios --disable-ntpd --disable-olsrd --enable-onewire --disable-openldap --disable-openvpn --disable-ping --disable-postgresql --disable-processes --disable-protocols --disable-redis --disable-match-regex --disable-target_replace --enable-write_riemann --disable-rrdtool --disable-target_scale --disable-sensors --disable-serial --disable-statsd --enable-target_set --disable-smart --disable-snmp --disable-swap --disable-syslog --enable-table --disable-tail --disable-tail_csv --disable-tcpconns --disable-thermal --disable-threshold --enable-match_timediff --enable-unixsock --disable-uptime --disable-users --disable-match_value --disable-vmem --enable-wireless --disable-write_http --enable-write_log --disable-write_prometheus --disable-write_redis --disable-write_sensu --disable-write_tsdb --disable-zookeeper --with-libcurl=/home/buildroot/autobuild/run/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr --with-libmysql=/home/buildroot/autobuild/run/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr --with-libyajl=/home/buildroot/autobuild/run/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr --with-libgcrypt=/home/buildroot/autobuild/run/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/bin/libgcrypt-config ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking build system type... x86_64-pc-linux-gnu checking host system type... riscv64-buildroot-linux-musl checking how to print strings... printf checking for riscv64-buildroot-linux-musl-gcc... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc accepts -g... yes checking for /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc option to accept ISO C89... none needed checking whether /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc understands -c and -o together... yes checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld checking if the linker (/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-nm checking the name lister (/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 3458764513820540925 checking how to convert x86_64-pc-linux-gnu file names to riscv64-buildroot-linux-musl format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld option to reload object files... -r checking for riscv64-buildroot-linux-musl-objdump... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-objdump checking how to recognize dependent libraries... pass_all checking for riscv64-buildroot-linux-musl-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for riscv64-buildroot-linux-musl-ar... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ar checking for archiver @FILE support... @ checking for riscv64-buildroot-linux-musl-strip... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-strip checking for riscv64-buildroot-linux-musl-ranlib... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ranlib checking for gawk... no checking for mawk... mawk checking command to parse /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-nm output from /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for riscv64-buildroot-linux-musl-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-cpp checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc static flag -static works... yes checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc linker (/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... cross checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for riscv64-buildroot-linux-musl-strip... (cached) /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking how to create a pax tar archive... gnutar checking dependency style of /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc... none checking whether make supports nested variables... (cached) yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc option to accept ISO C99... none needed checking for C compiler vendor... gnu checking whether we are using the GNU C++ compiler... yes checking whether /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ accepts -g... yes checking how to run the C++ preprocessor... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ -E checking for ld used by /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld checking if the linker (/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld) is GNU ld... yes checking whether the /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ linker (/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld) supports shared libraries... yes checking for /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ static flag -static works... yes checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ supports -c -o file.o... yes checking if /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ linker (/home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking dependency style of /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++... none checking how to run the C preprocessor... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-cpp checking for egrep... (cached) /bin/grep -E checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking for bison... bison -y checking for valgrind... no checking pkg-config is at least version 0.9.0... yes checking if Bison is the parser generator... yes checking for kernel type (linux-musl)... Linux checking for sys/wait.h that is POSIX.1 compatible... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for arpa/inet.h... yes checking for endian.h... yes checking for fcntl.h... yes checking for fnmatch.h... yes checking for fs_info.h... no checking for fshelp.h... no checking for grp.h... yes checking for kstat.h... no checking for kvm.h... no checking for libgen.h... yes checking for locale.h... yes checking for mntent.h... yes checking for mnttab.h... no checking for netdb.h... yes checking for paths.h... yes checking for poll.h... yes checking for pthread_np.h... no checking for pwd.h... yes checking for regex.h... yes checking for sys/endian.h... no checking for sys/fs_types.h... no checking for sys/fstyp.h... no checking for sys/ioctl.h... yes checking for sys/isa_defs.h... no checking for sys/mntent.h... no checking for sys/mnttab.h... no checking for sys/param.h... yes checking for sys/resource.h... yes checking for sys/select.h... yes checking for sys/socket.h... yes checking for sys/statfs.h... yes checking for sys/statvfs.h... yes checking for sys/types.h... (cached) yes checking for sys/un.h... yes checking for sys/vfs.h... yes checking for sys/vfstab.h... no checking for sys/vmmeter.h... no checking for syslog.h... yes checking for wordexp.h... yes checking for linux/ip_vs.h... yes checking for netinet/in_systm.h... yes checking for netinet/in.h... yes checking for netinet/ip.h... yes checking for netinet/ip_icmp.h... yes checking for netinet/ip_var.h... no checking for netinet/ip6.h... yes checking for netinet/icmp6.h... yes checking for netinet/tcp.h... yes checking for netinet/udp.h... yes checking sys/dkstat.h usability... no checking sys/dkstat.h presence... no checking for sys/dkstat.h... no checking for sys/sysctl.h... no checking ifaddrs.h usability... yes checking ifaddrs.h presence... yes checking for ifaddrs.h... yes checking for net/if.h... yes checking linux/major.h usability... yes checking linux/major.h presence... yes checking for linux/major.h... yes checking for linux/raid/md_u.h... yes checking sys/sysmacros.h usability... yes checking sys/sysmacros.h presence... yes checking for sys/sysmacros.h... yes checking for linux/wireless.h... yes checking for linux/if.h... yes checking for linux/inet_diag.h... yes checking for linux/netdevice.h... yes checking for linux/sockios.h... yes checking for linux/ethtool.h... yes checking for linux/un.h... yes checking cpuid.h usability... no checking cpuid.h presence... no checking for cpuid.h... no checking sys/capability.h usability... yes checking sys/capability.h presence... yes checking for sys/capability.h... yes checking for cap_get_proc in -lcap... yes checking whether CAP_IS_SUPPORTED is declared... yes checking linux/pci_regs.h usability... yes checking linux/pci_regs.h presence... yes checking for linux/pci_regs.h... yes checking for sys/swap.h... yes checking for vm/anon.h... no checking sys/loadavg.h usability... no checking sys/loadavg.h presence... no checking for sys/loadavg.h... no checking linux/config.h usability... no checking linux/config.h presence... no checking for linux/config.h... no checking utmp.h usability... yes checking utmp.h presence... yes checking for utmp.h... yes checking utmpx.h usability... yes checking utmpx.h presence... yes checking for utmpx.h... yes checking for sys/ucred.h... no checking for sys/mount.h... yes checking for xfs/xqm.h... no checking for net/if_arp.h... yes checking net/ppp_defs.h usability... no checking net/ppp_defs.h presence... no checking for net/ppp_defs.h... no checking for net/if_ppp.h... no checking for netinet/if_ether.h... yes checking for net/pfvar.h... no checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking whether clock_boottime and clock_monotonic are supported... yes checking for an ANSI C-conforming const... yes checking for pid_t... yes checking for size_t... yes checking for uid_t in sys/types.h... yes checking whether time.h and sys/time.h may both be included... yes checking for asprintf... yes checking for execvpe... yes checking for getpwnam... yes checking for getpwnam_r... yes checking for if_indextoname... yes checking for setgroups... yes checking for setlocale... yes checking whether strerror_r is declared... yes checking for strerror_r... yes checking whether strerror_r returns char *... no checking for strtok_r... yes checking for socket... yes checking for inet_ntop... yes checking for clock_gettime... yes checking for nanosleep... yes checking for getifaddrs... yes checking for getloadavg... yes checking for getutent... yes checking for getutxent... yes checking for host_statistics... no checking for processor_info... no checking for statfs... yes checking for statvfs... yes checking for sysctl... no checking for sysctlbyname... no checking for syslog... yes checking for thread_info... no checking for strptime... yes checking whether strptime is exported by default... yes checking for timegm... yes checking for sysctl kern.cp_times... no checking for sysctl kern.cp_time... no checking for swapctl... no checking whether clock_boottime and clock_monotonic are supported... (cached) yes checking for getfsstat... no checking for getvfsstat... no checking for listmntent... no checking for getmntent_r... yes checking for getmntent... yes checking whether getmntent takes one argument... yes checking whether getmntent takes two arguments... no checking whether htonll is defined... no checking for struct if_data.ifi_ibytes... no checking for struct if_data.ifi_opackets... no checking for struct if_data.ifi_ierrors... no checking for struct net_device_stats.rx_bytes... no checking for struct net_device_stats.tx_packets... no checking for struct net_device_stats.rx_errors... no checking for struct inet_diag_req.id... yes checking for struct inet_diag_req.idiag_states... yes checking for struct ip_mreqn.imr_ifindex... yes checking for struct kinfo_proc.ki_pid... no checking for struct kinfo_proc.ki_rssize... no checking for struct kinfo_proc.ki_rusage... no checking for struct kinfo_proc.p_pid... no checking for struct kinfo_proc.p_vm_rssize... no checking for struct kinfo_proc2.p_pid... no checking for struct kinfo_proc2.p_uru_maxrss... no checking for struct udphdr.uh_dport... yes checking for struct udphdr.uh_sport... yes checking for struct udphdr.dest... no checking for struct udphdr.source... no checking for kstat_io_t.nwritten... no checking for kstat_io_t.writes... no checking for kstat_io_t.nwrites... no checking for kstat_io_t.wtime... no checking for pthread_setname_np... yes checking for pthread_set_name_np... no checking for struct ip6_ext... yes checking i2c/smbus.h usability... yes checking i2c/smbus.h presence... yes checking for i2c/smbus.h... yes checking whether i2c_smbus_read_i2c_block_data is declared... yes checking for pthread_create in -lpthread... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for kvm_getprocs in -lkvm... no checking for kvm_getswapinfo in -lkvm... no checking for kvm_nlist in -lkvm... no checking for kvm_openfiles in -lkvm... no checking libaquaero5.h usability... no checking libaquaero5.h presence... no checking for libaquaero5.h... no checking hiredis/hiredis.h usability... no checking hiredis/hiredis.h presence... no checking for hiredis/hiredis.h... no checking redfish.h usability... no checking redfish.h presence... no checking for redfish.h... no checking curl/curl.h usability... yes checking curl/curl.h presence... yes checking for curl/curl.h... yes checking for curl_easy_init in -lcurl... yes checking whether CURLOPT_USERNAME is declared... yes checking whether CURLOPT_TIMEOUT_MS is declared... yes checking for CURLINFO_APPCONNECT_TIME... yes checking dbi/dbi.h usability... no checking dbi/dbi.h presence... no checking for dbi/dbi.h... no checking for DPDK... no configure: no DPDK pkg-config, using defaults checking rte_config.h usability... no checking rte_config.h presence... no checking for rte_config.h... no checking libesmtp.h usability... no checking libesmtp.h presence... no checking for libesmtp.h... no checking gm_protocol.h usability... no checking gm_protocol.h presence... no checking for gm_protocol.h... no checking gcrypt.h usability... yes checking gcrypt.h presence... yes checking for gcrypt.h... yes checking for gcry_md_hash_buffer in -lgcrypt... yes checking gps.h usability... no checking gps.h presence... no checking for gps.h... no checking for GRPCPP... no checking whether /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-g++ accepts -std=c++11... yes checking for grpc_cpp_plugin... no configure: WARNING: JAVA_HOME: No such directory: /usr/lib/jvm checking for javac... no checking for jar... no checking ldap.h usability... no checking ldap.h presence... no checking for ldap.h... no checking for LUA... yes checking lua.h usability... yes checking lua.h presence... yes checking for lua.h... yes checking lauxlib.h usability... yes checking lauxlib.h presence... yes checking for lauxlib.h... yes checking lualib.h usability... yes checking lualib.h presence... yes checking for lualib.h... yes checking for lua_settop... yes checking libmemcached/memcached.h usability... no checking libmemcached/memcached.h presence... no checking for libmemcached/memcached.h... no checking for MICROHTTPD... no checking for LIBMONGOC... no checking mosquitto.h usability... no checking mosquitto.h presence... no checking for mosquitto.h... no checking for libmnl.h... no checking for libmnl/libmnl.h... yes checking for linux/gen_stats.h... yes checking for linux/pkt_sched.h... yes checking for struct rtnl_link_stats64.tx_window_errors... yes checking for struct rtnl_link_stats.rx_nohandler... yes checking for struct rtnl_link_stats64.rx_nohandler... yes checking for mnl_nlmsg_get_payload in -lmnl... yes checking netapp_api.h usability... no checking netapp_api.h presence... no checking for netapp_api.h... no checking net-snmp/net-snmp-config.h usability... no checking net-snmp/net-snmp-config.h presence... no checking for net-snmp/net-snmp-config.h... no checking for net-snmp/net-snmp-includes.h... no checking for net-snmp/agent/net-snmp-agent-includes.h... no checking oping.h usability... no checking oping.h presence... no checking for oping.h... no checking owcapi.h usability... yes checking owcapi.h presence... yes checking for owcapi.h... yes checking for OW_get in -lowcapi... yes checking pcap.h usability... yes checking pcap.h presence... yes checking for pcap.h... yes checking for pcap_open_live in -lpcap... yes checking whether libpcap has PCAP_ERROR_IFACE_NOT_UP... yes checking for perl... /usr/bin/perl checking for libperl... no checking pmw_api.h usability... no checking pmw_api.h presence... no checking for pmw_api.h... no configure: WARNING: pg_config returned with status 127 checking libpq-fe.h usability... no checking libpq-fe.h presence... no checking for libpq-fe.h... no checking pqos.h usability... no checking pqos.h presence... no checking for pqos.h... no checking jansson.h usability... yes checking jansson.h presence... yes checking for jansson.h... yes checking for json_loads in -ljansson... yes checking jevents.h usability... no checking jevents.h presence... no checking for jevents.h... no checking for PROTOBUF... no checking for main in -lprotobuf... no checking for protoc... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/protoc checking for protoc 3.0.0+... yes (libprotoc 3.12.2) checking for PROTOBUF_C... yes checking for protobuf_c_message_pack in -lprotobuf-c... yes checking protobuf-c/protobuf-c.h usability... yes checking protobuf-c/protobuf-c.h presence... yes checking for protobuf-c/protobuf-c.h... yes checking for protoc-c... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/protoc-c checking for python3-config... /home/buildroot/autobuild/run/instance-2/output-1/host/bin/python3-config checking Python.h usability... yes checking Python.h presence... yes checking for Python.h... yes checking for libpython... yes checking proton/proactor.h usability... no checking proton/proactor.h presence... no checking for proton/proactor.h... no checking amqp.h usability... no checking amqp.h presence... no checking for amqp.h... no checking librdkafka/rdkafka.h usability... no checking librdkafka/rdkafka.h presence... no checking for librdkafka/rdkafka.h... no checking routeros_api.h usability... no checking routeros_api.h presence... no checking for routeros_api.h... no checking for RRD... no checking rrd.h usability... no checking rrd.h presence... no checking for rrd.h... no checking sensors/sensors.h usability... no checking sensors/sensors.h presence... no checking for sensors/sensors.h... no checking for LIBSIGROK... no checking openssl/sha.h usability... yes checking openssl/sha.h presence... yes checking for openssl/sha.h... yes checking openssl/blowfish.h usability... yes checking openssl/blowfish.h presence... yes checking for openssl/blowfish.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking for OPENSSL_init_ssl in -lssl... yes checking pkg-config for libstatgrab... not found checking tcrdb.h usability... no checking tcrdb.h presence... no checking for tcrdb.h... no checking libudev.h usability... no checking libudev.h presence... no checking for libudev.h... no checking xenctrl.h usability... no checking xenctrl.h presence... no checking for xenctrl.h... no checking yajl/yajl_parse.h usability... yes checking yajl/yajl_parse.h presence... yes checking for yajl/yajl_parse.h... yes checking yajl/yajl_tree.h usability... yes checking yajl/yajl_tree.h presence... yes checking for yajl/yajl_tree.h... yes checking yajl/yajl_version.h usability... yes checking yajl/yajl_version.h presence... yes checking for yajl/yajl_version.h... yes checking for yajl_alloc in -lyajl... (cached) yes checking for yajl_tree_parse in -lyajl... yes checking MicAccessApi.h usability... no checking MicAccessApi.h presence... no checking for MicAccessApi.h... no checking libxml/parser.h usability... yes checking libxml/parser.h presence... yes checking for libxml/parser.h... yes checking for xmlXPathEval in -lxml2... yes checking for libOpenIPMIpthread... no (pkg-config doesn't know OpenIPMIpthread) checking atasmart.h usability... no checking atasmart.h presence... no checking for atasmart.h... no checking for LIBNOTIFY... no checking for LIBRIEMANN_CLIENT... yes configure: Checking for libslurm using /home/buildroot/autobuild/run/instance-2/output-1/host/bin/pkg-config checking which default log plugin to load... none checking which default write plugin to load... none checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/libcollectdclient/collectd/lcc_features.h config.status: creating Makefile config.status: creating src/collectd.conf config.status: creating src/libcollectdclient/libcollectdclient.pc config.status: creating src/config.h config.status: executing libtool commands config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls Configuration: Build: Platform . . . . . . Linux Compiler vendor . . . gnu CC . . . . . . . . . /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-gcc CFLAGS . . . . . . . -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os CXXFLAGS . . . . . . -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os CPP . . . . . . . . . /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-cpp CPPFLAGS . . . . . . -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 GRPC_CPP_PLUGIN . . . LD . . . . . . . . . /home/buildroot/autobuild/run/instance-2/output-1/host/bin/riscv64-buildroot-linux-musl-ld LDFLAGS . . . . . . . PROTOC . . . . . . . /home/buildroot/autobuild/run/instance-2/output-1/host/bin/protoc YACC . . . . . . . . bison -y YFLAGS . . . . . . . Libraries: intel mic . . . . . . no (MicAccessApi not found) libaquaero5 . . . . . no (libaquaero5.h not found) libatasmart . . . . . no (atasmart.h not found) libcurl . . . . . . . yes libdbi . . . . . . . no (dbi/dbi.h not found) libdpdk . . . . . . . no (rte_config.h not found) libesmtp . . . . . . no (libesmtp.h not found) libganglia . . . . . no (gm_protocol.h not found) libgcrypt . . . . . . yes libgps . . . . . . . no (gps.h not found) libgrpc++ . . . . . . no (pkg-config could not find libgrpc++) libhiredis . . . . . no (hiredis.h not found) libi2c-dev . . . . . yes libiokit . . . . . . no libiptc . . . . . . . no (pkg-config doesn't know libiptc) libjansson . . . . . yes libjevents . . . . . no (jevents.h not found) libjvm . . . . . . . no (jar not found) libkstat . . . . . . no (Solaris only) libkvm . . . . . . . no libldap . . . . . . . no ('ldap.h' not found) liblua . . . . . . . yes libmemcached . . . . no (libmemcached/memcached.h not found) libmicrohttpd . . . . no (pkg-config could not find libmicrohttpd) libmnl . . . . . . . yes libmodbus . . . . . . no (pkg-config doesn't know libmodbus) libmongoc . . . . . . no (pkg-config could not find libmongoc) libmosquitto . . . . no (mosquitto.h not found) libmysql . . . . . . no (mysql_config failed) libnetapp . . . . . . no (netapp_api.h not found) libnetsnmp . . . . . no (net-snmp/net-snmp-includes.h not found) libnetsnmpagent . . . no (net-snmp/agent/net-snmp-agent-includes.h not found) libnotify . . . . . . no (pkg-config doesn't know libnotify) libnvidia-ml . . . . no libopenipmi . . . . . no (pkg-config doesn't know OpenIPMIpthread) liboping . . . . . . no (oping.h not found) libowcapi . . . . . . yes libpcap . . . . . . . yes libperfstat . . . . . no (AIX only) libperl . . . . . . . no libpmwapi . . . . . . no (pmw_api.h not found) libpq . . . . . . . . no (libpq-fe.h not found) libpqos . . . . . . . no (pqos.h not found) libprotobuf . . . . . no (libprotobuf not found) libprotobuf-c . . . . yes libpython . . . . . . yes libqpid-proton . . . no (proton/proactor.h not found) librabbitmq . . . . . no (amqp.h not found) libriemann-client . . yes librdkafka . . . . . no (librdkafka/rdkafka.h not found) librouteros . . . . . no (routeros_api.h not found) librrd . . . . . . . no (rrd.h not found) libsensors . . . . . no (sensors/sensors.h not found) libsigrok . . . . . no (pkg-config could not find libsigrok) libssl . . . . . . . yes libslurm . . . . . . no (pkg-config doesn't know libslurm) libstatgrab . . . . . no (pkg-config doesn't know libstatgrab) libtokyotyrant . . . no (tcrdb.h not found) libudev . . . . . . . no (libudev.h not found) libupsclient . . . . no (pkg-config doesn't know libupsclient) libvarnish . . . . . no (pkg-config doesn't know varnishapi) libvirt . . . . . . . no (pkg-config doesn't know libvirt) libxenctrl . . . . . no (xenctrl.h not found) libxml2 . . . . . . . yes libxmms . . . . . . . no libyajl . . . . . . . yes oracle . . . . . . . no (ORACLE_HOME is not set) protobuf-c . . . . . yes protoc 3 . . . . . . yes Features: daemon mode . . . . . yes debug . . . . . . . . no Bindings: perl . . . . . . . . no Modules: aggregation . . . . . no (disabled on command line) amqp . . . . . . . no (disabled on command line) amqp1 . . . . . . . no (proton/proactor.h not found) apache . . . . . . . no (disabled on command line) apcups . . . . . . . no (disabled on command line) apple_sensors . . . . no (disabled on command line) aquaero . . . . . . . no (disabled on command line) ascent . . . . . . . no (disabled on command line) barometer . . . . . . no (disabled on command line) battery . . . . . . . no (disabled on command line) bind . . . . . . . . no (disabled on command line) buddyinfo . . . . . . yes capabilities . . . . no ceph . . . . . . . . yes cgroups . . . . . . . no (disabled on command line) chrony. . . . . . . . yes check_uptime. . . . . yes connectivity. . . . . yes conntrack . . . . . . no (disabled on command line) contextswitch . . . . no (disabled on command line) cpu . . . . . . . . . no (disabled on command line) cpufreq . . . . . . . no (disabled on command line) cpusleep . . . . . . no (disabled on command line) csv . . . . . . . . . no (disabled on command line) curl . . . . . . . . yes curl_json . . . . . . no (disabled on command line) curl_xml . . . . . . no (disabled on command line) dbi . . . . . . . . . no (disabled on command line) dcpmm . . . . . . . no (pmw_api.h not found) df . . . . . . . . . yes disk . . . . . . . . no (disabled on command line) dns . . . . . . . . . no (disabled on command line) dpdkevents. . . . . . no dpdkstat . . . . . . no (disabled on command line) dpdk_telemetry. . . . yes drbd . . . . . . . . no (disabled on command line) email . . . . . . . . no (disabled on command line) entropy . . . . . . . no (disabled on command line) ethstat . . . . . . . no (disabled on command line) exec . . . . . . . . no (disabled on command line) fhcount . . . . . . . no (disabled on command line) filecount . . . . . . no (disabled on command line) fscache . . . . . . . yes gmond . . . . . . . . no (disabled on command line) gps . . . . . . . . . no (disabled on command line) gpu_nvidia . . . . . no grpc . . . . . . . . no (disabled on command line) hddtemp . . . . . . . no (disabled on command line) hugepages . . . . . . no (disabled on command line) intel_pmu . . . . . . no (jevents.h not found) intel_rdt . . . . . . no (disabled on command line) interface . . . . . . no (disabled on command line) ipc . . . . . . . . . no (disabled on command line) ipmi . . . . . . . . no (disabled on command line) iptables . . . . . . no (disabled on command line) ipstats . . . . . . . no ipvs . . . . . . . . yes irq . . . . . . . . . no (disabled on command line) java . . . . . . . . no (disabled on command line) load . . . . . . . . yes logfile . . . . . . . no (disabled on command line) logparser . . . . . . yes log_logstash . . . . no (disabled on command line) lpar . . . . . . . . no (disabled on command line) lua . . . . . . . . . yes madwifi . . . . . . . no (disabled on command line) match_empty_counter . yes match_hashed . . . . no (disabled on command line) match_regex . . . . . no (disabled on command line) match_timediff . . . yes match_value . . . . . no (disabled on command line) mbmon . . . . . . . . no (disabled on command line) mcelog . . . . . . . yes md . . . . . . . . . no (disabled on command line) memcachec . . . . . . no (disabled on command line) memcached . . . . . . no (disabled on command line) memory . . . . . . . no (disabled on command line) mic . . . . . . . . . no (disabled on command line) modbus . . . . . . . no (disabled on command line) mqtt . . . . . . . . no (disabled on command line) multimeter . . . . . no (disabled on command line) mysql . . . . . . . . no (disabled on command line) netapp . . . . . . . no (disabled on command line) netlink . . . . . . . yes network . . . . . . . no (disabled on command line) nfs . . . . . . . . . no (disabled on command line) nginx . . . . . . . . no (disabled on command line) notify_desktop . . . no (disabled on command line) notify_email . . . . no (disabled on command line) notify_nagios . . . . no (disabled on command line) ntpd . . . . . . . . no (disabled on command line) numa . . . . . . . . no (disabled on command line) nut . . . . . . . . . no (disabled on command line) olsrd . . . . . . . . no (disabled on command line) onewire . . . . . . . yes openldap . . . . . . no (disabled on command line) openvpn . . . . . . . no (disabled on command line) oracle . . . . . . . no (disabled on command line) ovs_events . . . . . yes ovs_stats . . . . . . yes pcie_errors . . . . . yes perl . . . . . . . . no (needs libperl) pf . . . . . . . . . no (disabled on command line) pinba . . . . . . . . no (disabled on command line) ping . . . . . . . . no (disabled on command line) postgresql . . . . . no (disabled on command line) powerdns . . . . . . no (disabled on command line) processes . . . . . . no (disabled on command line) procevent . . . . . . yes protocols . . . . . . no (disabled on command line) python . . . . . . . no (disabled on command line) redfish . . . . . . . no (redfish.h not found) redis . . . . . . . . no (disabled on command line) routeros . . . . . . no (disabled on command line) rrdcached . . . . . . no (disabled on command line) rrdtool . . . . . . . no (disabled on command line) sensors . . . . . . . no (disabled on command line) serial . . . . . . . no (disabled on command line) sigrok . . . . . . . no (disabled on command line) slurm . . . . . . . . no (pkg-config doesn't know libslurm) smart . . . . . . . . no (disabled on command line) snmp . . . . . . . . no (disabled on command line) snmp_agent . . . . . no (net-snmp/agent/net-snmp-agent-includes.h not found) statsd . . . . . . . no (disabled on command line) swap . . . . . . . . no (disabled on command line) synproxy . . . . . . yes sysevent. . . . . . . yes syslog . . . . . . . no (disabled on command line) table . . . . . . . . yes tail_csv . . . . . . no (disabled on command line) tail . . . . . . . . no (disabled on command line) tape . . . . . . . . no (disabled on command line) target_notification . no (disabled on command line) target_replace . . . no (disabled on command line) target_scale . . . . no (disabled on command line) target_set . . . . . yes target_v5upgrade . . no (disabled on command line) tcpconns . . . . . . no (disabled on command line) teamspeak2 . . . . . no (disabled on command line) ted . . . . . . . . . no (disabled on command line) thermal . . . . . . . no (disabled on command line) threshold . . . . . . no (disabled on command line) tokyotyrant . . . . . no (disabled on command line) turbostat . . . . . . no (disabled on command line) ubi . . . . . . . . . yes unixsock . . . . . . yes uptime . . . . . . . no (disabled on command line) users . . . . . . . . no (disabled on command line) uuid . . . . . . . . no (disabled on command line) varnish . . . . . . . no (disabled on command line) virt . . . . . . . . no (disabled on command line) vmem . . . . . . . . no (disabled on command line) vserver . . . . . . . no (disabled on command line) wireless . . . . . . yes write_graphite . . . no (disabled on command line) write_http . . . . . no (disabled on command line) write_influxdb_udp. . yes write_kafka . . . . . no (disabled on command line) write_log . . . . . . yes write_mongodb . . . . no (disabled on command line) write_prometheus. . . no (disabled on command line) write_redis . . . . . no (disabled on command line) write_riemann . . . . yes write_sensu . . . . . no (disabled on command line) write_stackdriver . . yes write_syslog . . . . yes write_tsdb . . . . . no (disabled on command line) xencpu . . . . . . . no (disabled on command line) xmms . . . . . . . . no (disabled on command line) zfs_arc . . . . . . . no (disabled on command line) zone . . . . . . . . no (disabled on command line) zookeeper . . . . . . no (disabled on command line) >>> collectd 5.11.0 Building PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0/ make[1]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0' /usr/bin/make all-am make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0' CC src/collectdctl-collectdctl.o CC src/daemon/utils_llist.lo CC src/collectdmon.o CC src/utils/metadata/meta_data.lo CC src/buddyinfo.lo CC src/ceph_la-ceph.lo CC src/chrony.lo CC src/check_uptime.lo CC src/connectivity_la-connectivity.lo CC src/curl_la-curl.lo CC src/df.lo CC src/dpdk_telemetry_la-dpdk_telemetry.lo CC src/fscache.lo CC src/ipvs.lo src/dpdk_telemetry.c:43:10: fatal error: sys/unistd.h: No such file or directory 43 | #include | ^~~~~~~~~~~~~~ compilation terminated. make[2]: *** [src/dpdk_telemetry_la-dpdk_telemetry.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0' make: *** [/home/buildroot/autobuild/run/instance-2/output-1/build/collectd-5.11.0/.stamp_built] Error 2 make: Leaving directory `/home/buildroot/autobuild/run/instance-2/buildroot'