libtool: install: /usr/bin/install -c sg_get_config /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_get_config
libtool: install: /usr/bin/install -c sg_get_lba_status /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_get_lba_status
libtool: install: /usr/bin/install -c sg_ident /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_ident
libtool: install: /usr/bin/install -c sg_inq /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_inq
libtool: install: /usr/bin/install -c sg_logs /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_logs
libtool: install: /usr/bin/install -c sg_luns /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_luns
libtool: install: /usr/bin/install -c sg_modes /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_modes
libtool: install: /usr/bin/install -c sg_opcodes /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_opcodes
libtool: install: /usr/bin/install -c sg_persist /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_persist
libtool: install: /usr/bin/install -c sg_prevent /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_prevent
libtool: install: /usr/bin/install -c sg_raw /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_raw
libtool: install: /usr/bin/install -c sg_rdac /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rdac
libtool: install: /usr/bin/install -c sg_read_attr /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_attr
libtool: install: /usr/bin/install -c sg_read_block_limits /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_block_limits
libtool: install: /usr/bin/install -c sg_read_buffer /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_buffer
libtool: install: /usr/bin/install -c sg_read_long /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_long
libtool: install: /usr/bin/install -c sg_readcap /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_readcap
libtool: install: /usr/bin/install -c sg_reassign /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reassign
libtool: install: /usr/bin/install -c sg_referrals /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_referrals
libtool: install: /usr/bin/install -c sg_rep_zones /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rep_zones
libtool: install: /usr/bin/install -c sg_requests /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_requests
libtool: install: /usr/bin/install -c sg_reset_wp /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reset_wp
libtool: install: /usr/bin/install -c sg_rmsn /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rmsn
libtool: install: /usr/bin/install -c sg_rtpg /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rtpg
libtool: install: /usr/bin/install -c sg_safte /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_safte
libtool: install: /usr/bin/install -c sg_sanitize /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sanitize
libtool: install: /usr/bin/install -c sg_sat_identify /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_identify
libtool: install: /usr/bin/install -c sg_sat_phy_event /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_phy_event
libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_read_gplog
libtool: install: /usr/bin/install -c sg_sat_set_features /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_set_features
libtool: install: /usr/bin/install -c sg_senddiag /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_senddiag
libtool: install: /usr/bin/install -c sg_ses /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_ses
libtool: install: /usr/bin/install -c sg_ses_microcode /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_ses_microcode
libtool: install: /usr/bin/install -c sg_start /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_start
libtool: install: /usr/bin/install -c sg_stpg /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_stpg
libtool: install: /usr/bin/install -c sg_sync /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sync
libtool: install: /usr/bin/install -c sg_timestamp /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_timestamp
libtool: install: /usr/bin/install -c sg_turs /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_turs
libtool: install: /usr/bin/install -c sg_unmap /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_unmap
libtool: install: /usr/bin/install -c sg_verify /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_verify
libtool: install: /usr/bin/install -c sg_vpd /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_vpd
libtool: install: /usr/bin/install -c sg_wr_mode /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_wr_mode
libtool: install: /usr/bin/install -c sg_write_buffer /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_buffer
libtool: install: /usr/bin/install -c sg_write_long /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_long
libtool: install: /usr/bin/install -c sg_write_same /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_same
libtool: install: /usr/bin/install -c sg_write_verify /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_verify
libtool: install: /usr/bin/install -c sg_zone /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_zone
libtool: install: /usr/bin/install -c sg_copy_results /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_copy_results
libtool: install: /usr/bin/install -c sg_dd /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_dd
libtool: install: /usr/bin/install -c sg_emc_trespass /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_emc_trespass
libtool: install: /usr/bin/install -c sg_map /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_map
libtool: install: /usr/bin/install -c sg_map26 /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_map26
libtool: install: /usr/bin/install -c sg_rbuf /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rbuf
libtool: install: /usr/bin/install -c sg_read /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read
libtool: install: /usr/bin/install -c sg_reset /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reset
libtool: install: /usr/bin/install -c sg_scan /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_scan
libtool: install: /usr/bin/install -c sg_test_rwbuf /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_test_rwbuf
libtool: install: /usr/bin/install -c sg_xcopy /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sg_xcopy
libtool: install: /usr/bin/install -c sginfo /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sginfo
libtool: install: /usr/bin/install -c sgm_dd /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sgm_dd
libtool: install: /usr/bin/install -c sgp_dd /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin/sgp_dd
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/src'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/src'
Making install in doc
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/doc'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/doc'
make[3]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/share/man/man8'
 /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 '/home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/share/man/man8'
 /usr/bin/install -c -m 644 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/share/man/man8'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/doc'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/doc'
Making install in scripts
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/scripts'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/scripts'
make[3]: Nothing to be done for `install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin'
 /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature '/home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/bin'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/scripts'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/scripts'
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
make[1]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
>>> sg3_utils 1.42 Fixing libtool files
>>> sg3_utils 1.42 Installing to target
PATH="/home/peko/autobuild/instance-1/output/host/bin:/home/peko/autobuild/instance-1/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /usr/bin/make -j6 DESTDIR=/home/peko/autobuild/instance-1/output/target install -C /home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/
make[1]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
Making install in include
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/include'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/include'
make[3]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/target/usr/include/scsi'
 /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_pt.h sg_linux_inc.h sg_io_linux.h '/home/peko/autobuild/instance-1/output/target/usr/include/scsi'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/include'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/include'
Making install in lib
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/lib'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/lib'
make[3]: Nothing to be done for `install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/target/usr/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libsgutils2.la '/home/peko/autobuild/instance-1/output/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libsgutils2.so.2.0.0 /home/peko/autobuild/instance-1/output/target/usr/lib/libsgutils2.so.2.0.0
libtool: install: (cd /home/peko/autobuild/instance-1/output/target/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so.2 || { rm -f libsgutils2.so.2 && ln -s libsgutils2.so.2.0.0 libsgutils2.so.2; }; })
libtool: install: (cd /home/peko/autobuild/instance-1/output/target/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2.so.2.0.0 libsgutils2.so; }; })
libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/peko/autobuild/instance-1/output/target/usr/lib/libsgutils2.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/lib'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/lib'
Making install in src
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/src'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/src'
make[3]: Nothing to be done for `install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/target/usr/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/peko/autobuild/instance-1/output/target/usr/bin'
libtool: install: /usr/bin/install -c sg_compare_and_write /home/peko/autobuild/instance-1/output/target/usr/bin/sg_compare_and_write
libtool: install: /usr/bin/install -c sg_decode_sense /home/peko/autobuild/instance-1/output/target/usr/bin/sg_decode_sense
libtool: install: /usr/bin/install -c sg_format /home/peko/autobuild/instance-1/output/target/usr/bin/sg_format
libtool: install: /usr/bin/install -c sg_get_config /home/peko/autobuild/instance-1/output/target/usr/bin/sg_get_config
libtool: install: /usr/bin/install -c sg_get_lba_status /home/peko/autobuild/instance-1/output/target/usr/bin/sg_get_lba_status
libtool: install: /usr/bin/install -c sg_ident /home/peko/autobuild/instance-1/output/target/usr/bin/sg_ident
libtool: install: /usr/bin/install -c sg_inq /home/peko/autobuild/instance-1/output/target/usr/bin/sg_inq
libtool: install: /usr/bin/install -c sg_logs /home/peko/autobuild/instance-1/output/target/usr/bin/sg_logs
libtool: install: /usr/bin/install -c sg_luns /home/peko/autobuild/instance-1/output/target/usr/bin/sg_luns
libtool: install: /usr/bin/install -c sg_modes /home/peko/autobuild/instance-1/output/target/usr/bin/sg_modes
libtool: install: /usr/bin/install -c sg_opcodes /home/peko/autobuild/instance-1/output/target/usr/bin/sg_opcodes
libtool: install: /usr/bin/install -c sg_persist /home/peko/autobuild/instance-1/output/target/usr/bin/sg_persist
libtool: install: /usr/bin/install -c sg_prevent /home/peko/autobuild/instance-1/output/target/usr/bin/sg_prevent
libtool: install: /usr/bin/install -c sg_raw /home/peko/autobuild/instance-1/output/target/usr/bin/sg_raw
libtool: install: /usr/bin/install -c sg_rdac /home/peko/autobuild/instance-1/output/target/usr/bin/sg_rdac
libtool: install: /usr/bin/install -c sg_read_attr /home/peko/autobuild/instance-1/output/target/usr/bin/sg_read_attr
libtool: install: /usr/bin/install -c sg_read_block_limits /home/peko/autobuild/instance-1/output/target/usr/bin/sg_read_block_limits
libtool: install: /usr/bin/install -c sg_read_buffer /home/peko/autobuild/instance-1/output/target/usr/bin/sg_read_buffer
libtool: install: /usr/bin/install -c sg_read_long /home/peko/autobuild/instance-1/output/target/usr/bin/sg_read_long
libtool: install: /usr/bin/install -c sg_readcap /home/peko/autobuild/instance-1/output/target/usr/bin/sg_readcap
libtool: install: /usr/bin/install -c sg_reassign /home/peko/autobuild/instance-1/output/target/usr/bin/sg_reassign
libtool: install: /usr/bin/install -c sg_referrals /home/peko/autobuild/instance-1/output/target/usr/bin/sg_referrals
libtool: install: /usr/bin/install -c sg_rep_zones /home/peko/autobuild/instance-1/output/target/usr/bin/sg_rep_zones
libtool: install: /usr/bin/install -c sg_requests /home/peko/autobuild/instance-1/output/target/usr/bin/sg_requests
libtool: install: /usr/bin/install -c sg_reset_wp /home/peko/autobuild/instance-1/output/target/usr/bin/sg_reset_wp
libtool: install: /usr/bin/install -c sg_rmsn /home/peko/autobuild/instance-1/output/target/usr/bin/sg_rmsn
libtool: install: /usr/bin/install -c sg_rtpg /home/peko/autobuild/instance-1/output/target/usr/bin/sg_rtpg
libtool: install: /usr/bin/install -c sg_safte /home/peko/autobuild/instance-1/output/target/usr/bin/sg_safte
libtool: install: /usr/bin/install -c sg_sanitize /home/peko/autobuild/instance-1/output/target/usr/bin/sg_sanitize
libtool: install: /usr/bin/install -c sg_sat_identify /home/peko/autobuild/instance-1/output/target/usr/bin/sg_sat_identify
libtool: install: /usr/bin/install -c sg_sat_phy_event /home/peko/autobuild/instance-1/output/target/usr/bin/sg_sat_phy_event
libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/peko/autobuild/instance-1/output/target/usr/bin/sg_sat_read_gplog
libtool: install: /usr/bin/install -c sg_sat_set_features /home/peko/autobuild/instance-1/output/target/usr/bin/sg_sat_set_features
libtool: install: /usr/bin/install -c sg_senddiag /home/peko/autobuild/instance-1/output/target/usr/bin/sg_senddiag
libtool: install: /usr/bin/install -c sg_ses /home/peko/autobuild/instance-1/output/target/usr/bin/sg_ses
libtool: install: /usr/bin/install -c sg_ses_microcode /home/peko/autobuild/instance-1/output/target/usr/bin/sg_ses_microcode
libtool: install: /usr/bin/install -c sg_start /home/peko/autobuild/instance-1/output/target/usr/bin/sg_start
libtool: install: /usr/bin/install -c sg_stpg /home/peko/autobuild/instance-1/output/target/usr/bin/sg_stpg
libtool: install: /usr/bin/install -c sg_sync /home/peko/autobuild/instance-1/output/target/usr/bin/sg_sync
libtool: install: /usr/bin/install -c sg_timestamp /home/peko/autobuild/instance-1/output/target/usr/bin/sg_timestamp
libtool: install: /usr/bin/install -c sg_turs /home/peko/autobuild/instance-1/output/target/usr/bin/sg_turs
libtool: install: /usr/bin/install -c sg_unmap /home/peko/autobuild/instance-1/output/target/usr/bin/sg_unmap
libtool: install: /usr/bin/install -c sg_verify /home/peko/autobuild/instance-1/output/target/usr/bin/sg_verify
libtool: install: /usr/bin/install -c sg_vpd /home/peko/autobuild/instance-1/output/target/usr/bin/sg_vpd
libtool: install: /usr/bin/install -c sg_wr_mode /home/peko/autobuild/instance-1/output/target/usr/bin/sg_wr_mode
libtool: install: /usr/bin/install -c sg_write_buffer /home/peko/autobuild/instance-1/output/target/usr/bin/sg_write_buffer
libtool: install: /usr/bin/install -c sg_write_long /home/peko/autobuild/instance-1/output/target/usr/bin/sg_write_long
libtool: install: /usr/bin/install -c sg_write_same /home/peko/autobuild/instance-1/output/target/usr/bin/sg_write_same
libtool: install: /usr/bin/install -c sg_write_verify /home/peko/autobuild/instance-1/output/target/usr/bin/sg_write_verify
libtool: install: /usr/bin/install -c sg_zone /home/peko/autobuild/instance-1/output/target/usr/bin/sg_zone
libtool: install: /usr/bin/install -c sg_copy_results /home/peko/autobuild/instance-1/output/target/usr/bin/sg_copy_results
libtool: install: /usr/bin/install -c sg_dd /home/peko/autobuild/instance-1/output/target/usr/bin/sg_dd
libtool: install: /usr/bin/install -c sg_emc_trespass /home/peko/autobuild/instance-1/output/target/usr/bin/sg_emc_trespass
libtool: install: /usr/bin/install -c sg_map /home/peko/autobuild/instance-1/output/target/usr/bin/sg_map
libtool: install: /usr/bin/install -c sg_map26 /home/peko/autobuild/instance-1/output/target/usr/bin/sg_map26
libtool: install: /usr/bin/install -c sg_rbuf /home/peko/autobuild/instance-1/output/target/usr/bin/sg_rbuf
libtool: install: /usr/bin/install -c sg_read /home/peko/autobuild/instance-1/output/target/usr/bin/sg_read
libtool: install: /usr/bin/install -c sg_reset /home/peko/autobuild/instance-1/output/target/usr/bin/sg_reset
libtool: install: /usr/bin/install -c sg_scan /home/peko/autobuild/instance-1/output/target/usr/bin/sg_scan
libtool: install: /usr/bin/install -c sg_test_rwbuf /home/peko/autobuild/instance-1/output/target/usr/bin/sg_test_rwbuf
libtool: install: /usr/bin/install -c sg_xcopy /home/peko/autobuild/instance-1/output/target/usr/bin/sg_xcopy
libtool: install: /usr/bin/install -c sginfo /home/peko/autobuild/instance-1/output/target/usr/bin/sginfo
libtool: install: /usr/bin/install -c sgm_dd /home/peko/autobuild/instance-1/output/target/usr/bin/sgm_dd
libtool: install: /usr/bin/install -c sgp_dd /home/peko/autobuild/instance-1/output/target/usr/bin/sgp_dd
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/src'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/src'
Making install in doc
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/doc'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/doc'
make[3]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/target/usr/share/man/man8'
 /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 '/home/peko/autobuild/instance-1/output/target/usr/share/man/man8'
 /usr/bin/install -c -m 644 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/peko/autobuild/instance-1/output/target/usr/share/man/man8'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/doc'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/doc'
Making install in scripts
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/scripts'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/scripts'
make[3]: Nothing to be done for `install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/target/usr/bin'
 /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature '/home/peko/autobuild/instance-1/output/target/usr/bin'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/scripts'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42/scripts'
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
make[1]: Leaving directory `/home/peko/autobuild/instance-1/output/build/sg3_utils-1.42'
for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/peko/autobuild/instance-1/output/target/usr/bin/sg_${prog} ; done
for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/peko/autobuild/instance-1/output/target/usr/bin/scsi_${prog} ; done
for prog in sginfo sgm_dd sgp_dd; do rm -f /home/peko/autobuild/instance-1/output/target/usr/bin/${prog}; done
>>>   Finalizing target directory
# Check files that are touched by more than one package
./support/scripts/check-uniq-files -t target /home/peko/autobuild/instance-1/output/build/packages-file-list.txt
Warning: target file "./usr/bin/unxz" is touched by more than one package: ['busybox', 'xz']
Warning: target file "./usr/share/info/dir" is touched by more than one package: ['libffi', 'gnupg', 'libgpgme']
Warning: target file "./bin/chattr" is touched by more than one package: ['busybox', 'e2fsprogs']
Warning: target file "./usr/bin/xz" is touched by more than one package: ['busybox', 'xz']
Warning: target file "./sbin/mke2fs" is touched by more than one package: ['busybox', 'e2fsprogs']
Warning: target file "./usr/bin/lzma" is touched by more than one package: ['busybox', 'xz']
Warning: target file "./usr/bin/unlzma" is touched by more than one package: ['busybox', 'xz']
Warning: target file "./usr/bin/lsscsi" is touched by more than one package: ['busybox', 'lsscsi']
Warning: target file "./usr/bin/lzcat" is touched by more than one package: ['busybox', 'xz']
Warning: target file "./usr/bin/xzcat" is touched by more than one package: ['busybox', 'xz']
Warning: target file "./bin/lsattr" is touched by more than one package: ['busybox', 'e2fsprogs']
./support/scripts/check-uniq-files -t staging /home/peko/autobuild/instance-1/output/build/packages-file-list-staging.txt
Warning: staging file "./usr/share/info/dir" is touched by more than one package: ['libffi', 'libgpgme']
./support/scripts/check-uniq-files -t host /home/peko/autobuild/instance-1/output/build/packages-file-list-host.txt
Warning: host file "./share/info/dir" is touched by more than one package: ['host-lzip', 'host-m4', 'host-libtool', 'host-autoconf', 'host-automake', 'host-bison', 'host-gettext', 'host-libffi']
Warning: host file "./bin/2to3" is touched by more than one package: ['host-python', 'host-python3']
rm -f /home/peko/autobuild/instance-1/output/target/usr/share/glib-2.0/schemas/*.xml /home/peko/autobuild/instance-1/output/target/usr/share/glib-2.0/schemas/*.dtd
/home/peko/autobuild/instance-1/output/host/bin/glib-compile-schemas /home/peko/autobuild/instance-1/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/peko/autobuild/instance-1/output/target/usr/share/glib-2.0/schemas
No schema files found: doing nothing.
PYTHONPATH="/home/peko/autobuild/instance-1/output/target/usr/lib/python3.6/" cd /home/peko/autobuild/instance-1/output/target && /home/peko/autobuild/instance-1/output/host/bin/python3.6 /home/peko/autobuild/instance-1/buildroot/support/scripts/pycompile.py  usr/lib/python3.6
find /home/peko/autobuild/instance-1/output/target/usr/lib/python3.6 -name '*.py' -print0 | xargs -0 --no-run-if-empty rm -f
find /home/peko/autobuild/instance-1/output/target/usr/lib/python3.6 -name '*.opt-1.pyc' -print0 -o -name '*.opt-2.pyc' -print0 | xargs -0 --no-run-if-empty rm -f
mkdir -p /home/peko/autobuild/instance-1/output/target/etc
echo "buildroot" > /home/peko/autobuild/instance-1/output/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/peko/autobuild/instance-1/output/target/etc/hosts
mkdir -p /home/peko/autobuild/instance-1/output/target/etc
echo "Welcome to Buildroot" > /home/peko/autobuild/instance-1/output/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/peko/autobuild/instance-1/output/target/etc/shadow
rm -f /home/peko/autobuild/instance-1/output/target/bin/sh
rm -f /home/peko/autobuild/instance-1/output/build/locales.nopurge
for i in C en_US locale-archive; do echo $i >> /home/peko/autobuild/instance-1/output/build/locales.nopurge; done
for dir in /home/peko/autobuild/instance-1/output/target/usr/share/locale; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/peko/autobuild/instance-1/output/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/peko/autobuild/instance-1/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/peko/autobuild/instance-1/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/peko/autobuild/instance-1/output/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/peko/autobuild/instance-1/output/target/usr/include /home/peko/autobuild/instance-1/output/target/usr/share/aclocal \
		/home/peko/autobuild/instance-1/output/target/usr/lib/pkgconfig /home/peko/autobuild/instance-1/output/target/usr/share/pkgconfig \
		/home/peko/autobuild/instance-1/output/target/usr/lib/cmake /home/peko/autobuild/instance-1/output/target/usr/share/cmake
find /home/peko/autobuild/instance-1/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/peko/autobuild/instance-1/output/target/lib/ /home/peko/autobuild/instance-1/output/target/usr/lib/ /home/peko/autobuild/instance-1/output/target/usr/libexec/ \
		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
rm -rf /home/peko/autobuild/instance-1/output/target/usr/share/gdb
rm -rf /home/peko/autobuild/instance-1/output/target/usr/share/bash-completion
rm -rf /home/peko/autobuild/instance-1/output/target/usr/share/zsh
rm -rf /home/peko/autobuild/instance-1/output/target/usr/man /home/peko/autobuild/instance-1/output/target/usr/share/man
rm -rf /home/peko/autobuild/instance-1/output/target/usr/info /home/peko/autobuild/instance-1/output/target/usr/share/info
rm -rf /home/peko/autobuild/instance-1/output/target/usr/doc /home/peko/autobuild/instance-1/output/target/usr/share/doc
rm -rf /home/peko/autobuild/instance-1/output/target/usr/share/gtk-doc
rmdir /home/peko/autobuild/instance-1/output/target/usr/share 2>/dev/null || true
find /home/peko/autobuild/instance-1/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/peko/autobuild/instance-1/output/host/bin/sparc-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/peko/autobuild/instance-1/output/target/lib/ -type f -name 'libpthread*.so*' | \
		xargs -r /home/peko/autobuild/instance-1/output/host/bin/sparc-linux-strip --remove-section=.comment --remove-section=.note --strip-debug
find /home/peko/autobuild/instance-1/output/target/lib/ -type f -name 'ld-*.so*' | \
		xargs -r /home/peko/autobuild/instance-1/output/host/bin/sparc-linux-strip --remove-section=.comment --remove-section=.note --strip-debug
test -f /home/peko/autobuild/instance-1/output/target/etc/ld.so.conf && \
		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/peko/autobuild/instance-1/output/target/etc/ld.so.conf.d && \
		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/peko/autobuild/instance-1/output/target/etc
( \
		echo "NAME=Buildroot"; \
		echo "VERSION=2018.02"; \
		echo "ID=buildroot"; \
		echo "VERSION_ID=2018.02"; \
		echo "PRETTY_NAME=\"Buildroot 2018.02\"" \
	) >  /home/peko/autobuild/instance-1/output/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/peko/autobuild/instance-1/output/target/etc
>>>   Sanitizing RPATH in target tree
/home/peko/autobuild/instance-1/buildroot/support/scripts/fix-rpath target
make: Leaving directory `/home/peko/autobuild/instance-1/buildroot'
make: Entering directory `/home/peko/autobuild/instance-1/buildroot'
>>>   Buildroot 2018.02 Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> host-lzip 1.19 Collecting legal info
ERROR: No hash found for COPYING
>>> toolchain-external  Collecting legal info
>>> skeleton  Collecting legal info
>>> skeleton-init-none  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> toolchain-external-custom  Collecting legal info
>>> toolchain  Collecting legal info
>>> alljoyn-tcl-16.04.00a 16.04.00 Collecting legal info
>>> alljoyn-tcl 16.04.00a Collecting legal info
>>> host-scons 2.5.1 Collecting legal info
ERROR: No hash found for LICENSE.txt
>>> host-python 2.7.14 Collecting legal info
LICENSE: OK (sha256: d2d17b17388da74dc9c6bdbf78eb7237432c3f8a0c87852df740ec99de2ec680)
>>> host-autoconf 2.69 Collecting legal info
ERROR: No hash found for COPYINGv3
ERROR: No hash found for COPYING.EXCEPTION
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> host-expat 2.2.5 Collecting legal info
COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76)
>>> host-pkgconf 0.9.12 Collecting legal info
ERROR: No hash found for COPYING
>>> host-zlib  Collecting legal info
>>> host-libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> benejson 0.9.7 Collecting legal info
ERROR: No hash found for LICENSE
>>> bitstream 1.2 Collecting legal info
ERROR: No hash found for COPYING
>>> busybox 1.27.2 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
>>> libtirpc 1.0.2 Collecting legal info
ERROR: No hash found for COPYING
>>> conntrack-tools 1.4.4 Collecting legal info
ERROR: No hash found for COPYING
>>> host-bison 3.0.4 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-flex 2.6.4 Collecting legal info
COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273)
>>> host-gettext 0.19.8.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
ERROR: No hash found for gettext-runtime/intl/COPYING.LIB
>>> host-libxml2 2.9.7 Collecting legal info
COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd)
>>> libnetfilter_conntrack 1.0.6 Collecting legal info
ERROR: No hash found for COPYING
>>> libmnl 1.0.4 Collecting legal info
ERROR: No hash found for COPYING
>>> libnfnetlink 1.0.1 Collecting legal info
ERROR: No hash found for COPYING
>>> libnetfilter_cthelper 1.0.0 Collecting legal info
ERROR: No hash found for COPYING
>>> libnetfilter_cttimeout 1.0.0 Collecting legal info
ERROR: No hash found for COPYING
>>> libnetfilter_queue 1.0.2 Collecting legal info
ERROR: No hash found for COPYING
>>> dvdauthor 0.7.2 Collecting legal info
ERROR: No hash found for COPYING
>>> freetype 2.8.1 Collecting legal info
docs/LICENSE.TXT: OK (sha256: fd056de4196903a676208ef58cfddafc7d583d1f28fa2e44c309cf84a59e62fb)
docs/FTL.TXT: OK (sha256: 4a9a548027a2c1d37788519dea833294c9c81f1ebc280e817f41f50d0c642d78)
docs/GPLv2.TXT: OK (sha256: c4120c6752c910c299e3bd9cb3a46ff262c268303ca2069b61f92f10a5656c18)
>>> libpng 1.6.34 Collecting legal info
LICENSE: OK (sha256: a247c24f82bacf0403fe2f3d5550493a91cdb575fe7036b764bda8cacf3efd9c)
>>> zlib  Collecting legal info
>>> libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> libxml2 2.9.7 Collecting legal info
COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd)
>>> xz 5.2.3 Collecting legal info
ERROR: No hash found for COPYING.GPLv2
ERROR: No hash found for COPYING.GPLv3
ERROR: No hash found for COPYING.LGPLv2.1
>>> e2fsprogs 1.43.9 Collecting legal info
NOTICE: OK (sha256: 680f852df303874fe9c722283a7da571ae9a0477768df8af1e363298e2adc51e)
lib/ss/mit-sipb-copyright.h: OK (sha256: 032989b508f1a72ebee5b3417e55d06d473f9ee203e45ab11864a7e49cdec63d)
lib/et/internal.h: OK (sha256: 47182fe6631a32f271a15bbe210751b3825b7199f588879aac7d4804fc8b4b8f)
>>> util-linux 2.31.1 Collecting legal info
README.licensing: OK (sha256: 1e4b65802b0df8115395c697029d03339f983d451a473a08643309c684410d9a)
Documentation/licenses/COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.UCB: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
Documentation/licenses/COPYING.BSD-3: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
>>> ncurses 6.0 Collecting legal info
ERROR: No hash found for README
>>> host-ncurses 6.0 Collecting legal info
ERROR: No hash found for README
>>> python3 3.6.3 Collecting legal info
ERROR: No hash found for LICENSE
>>> host-python3 3.6.3 Collecting legal info
ERROR: No hash found for LICENSE
>>> libffi 3.2.1 Collecting legal info
LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5)
>>> mpdecimal 2.4.1 Collecting legal info
ERROR: No hash found for LICENSE.txt
>>> ethtool 4.13 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> fastd 18 Collecting legal info
ERROR: No hash found for COPYRIGHT
>>> host-cmake 3.8.2 Collecting legal info
ERROR: No hash found for Copyright.txt
>>> libcap 2.25 Collecting legal info
ERROR: No hash found for License
>>> host-gperf 3.0.4 Collecting legal info
ERROR: No hash found for COPYING
>>> host-libcap 2.25 Collecting legal info
ERROR: No hash found for License
>>> libsodium 1.0.16 Collecting legal info
LICENSE: OK (sha256: 6faf327c97dca6da69acefc6d3969d7bffb70a24f0707874870fdcfd6b0acf58)
>>> libuecc 7 Collecting legal info
ERROR: No hash found for COPYRIGHT
>>> ffmpeg 3.4.2 Collecting legal info
LICENSE.md: OK (sha256: 73d99bc83313fff665b426d6672b4e0479102bc402fe22314ac9ce94a38aa5ff)
COPYING.LGPLv2.1: OK (sha256: b634ab5640e258563c536e658cad87080553df6f34f62269a21d554844e58bfe)
>>> gnupg 1.4.22 Collecting legal info
ERROR: No hash found for COPYING
>>> httping 2.5 Collecting legal info
ERROR: No hash found for license.txt
>>> libassuan 2.5.1 Collecting legal info
COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861)
COPYING: OK (sha256: fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7)
>>> libgpg-error 1.27 Collecting legal info
ERROR: No hash found for COPYING
ERROR: No hash found for COPYING.LIB
>>> libcoap v4.1.2 Collecting legal info
ERROR: No hash found for COPYING
ERROR: No hash found for LICENSE.GPL
ERROR: No hash found for LICENSE.BSD
>>> liberation 2.00.1 Collecting legal info
ERROR: No hash found for LICENSE
>>> libfuse 2.9.7 Collecting legal info
ERROR: No hash found for COPYING
ERROR: No hash found for COPYING.LIB
>>> libglib2 2.54.2 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-libglib2 2.54.2 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-libffi 3.2.1 Collecting legal info
LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5)
>>> host-pcre 8.41 Collecting legal info
LICENCE: OK (sha256: 9ac4dfc82b2645ff77b56b759f95f28aa15ab15a03670fa6d4313a6b351e60f0)
>>> host-util-linux 2.31.1 Collecting legal info
README.licensing: OK (sha256: 1e4b65802b0df8115395c697029d03339f983d451a473a08643309c684410d9a)
Documentation/licenses/COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.UCB: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
Documentation/licenses/COPYING.BSD-3: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
>>> pcre 8.41 Collecting legal info
LICENCE: OK (sha256: 9ac4dfc82b2645ff77b56b759f95f28aa15ab15a03670fa6d4313a6b351e60f0)
>>> libgpgme 1.10.0 Collecting legal info
COPYING.LESSER: OK (sha256: ca0061fc1381a3ab242310e4b3f56389f28e3d460eb2fd822ed7a21c6f030532)
>>> libnpth 1.5 Collecting legal info
ERROR: No hash found for COPYING.LIB
>>> libostree 2018.1 Collecting legal info
COPYING: OK (sha256: b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c)
>>> libsocketcan 0.0.10 Collecting legal info
>>> libtomcrypt 1.18.1 Collecting legal info
ERROR: No hash found for LICENSE
>>> libtommath 1.0.1 Collecting legal info
ERROR: No hash found for LICENSE
>>> lsscsi 0.28 Collecting legal info
ERROR: No hash found for COPYING
>>> mpv 0.27.2 Collecting legal info
ERROR: No hash found for LICENSE
>>> host-waf 1.9.5 Collecting legal info
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> portaudio v190600_20161030 Collecting legal info
ERROR: No hash found for LICENSE.txt
>>> pugixml 1.7 Collecting legal info
ERROR: No hash found for readme.txt
>>> python-click 6.7 Collecting legal info
ERROR: No hash found for LICENSE
>>> host-python-setuptools v38.4.0 Collecting legal info
LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a)
>>> python-dominate 2.3.1 Collecting legal info
ERROR: No hash found for LICENSE.txt
>>> python-flask-cors 3.0.3 Collecting legal info
LICENSE: OK (sha256: 6e1a1bdc54834c1e0740cbce5d5f6f2cae1c846fd2a7f482b11649594fafbd5d)
>>> python-flask 0.12.2 Collecting legal info
ERROR: No hash found for LICENSE
>>> python-itsdangerous 0.24 Collecting legal info
ERROR: No hash found for LICENSE
>>> python-jinja2 2.9.5 Collecting legal info
ERROR: No hash found for LICENSE
>>> python-markupsafe 1.0 Collecting legal info
ERROR: No hash found for LICENSE
>>> python-mistune 0.8 Collecting legal info
LICENSE: OK (sha256: 0c5259c3dd0a7c46f4835221645f62a0638c9b9faa02af08676e8069e1ff964b)
>>> python-six 1.11.0 Collecting legal info
LICENSE: OK (sha256: 63478682e84e8c98f4c46308995f1f521a6886976e25421827d2a2be03581328)
>>> python-spidev 3.2 Collecting legal info
ERROR: No hash found for LICENSE.md
>>> python-werkzeug 0.12.2 Collecting legal info
ERROR: No hash found for LICENSE
>>> ser2net 3.4 Collecting legal info
ERROR: No hash found for COPYING
>>> sg3_utils 1.42 Collecting legal info
ERROR: No hash found for COPYING
ERROR: No hash found for BSD_LICENSE
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined)
WARNING: alljoyn-tcl-base-16.04.00: cannot save license (ALLJOYN_TCL_BASE_LICENSE_FILES not defined)
WARNING: alljoyn-tcl-16.04.00a: cannot save license (ALLJOYN_TCL_LICENSE_FILES not defined)
WARNING: libsocketcan-0.0.10: cannot save license (LIBSOCKETCAN_LICENSE_FILES not defined)
WARNING: waf-1.9.5: cannot save license (HOST_WAF_LICENSE_FILES not defined)
Legal info produced in /home/peko/autobuild/instance-1/output/legal-info
make: Leaving directory `/home/peko/autobuild/instance-1/buildroot'