echo "# endif"; echo; \ if [ ".-DFPM_PPC" != "." ]; then \ echo ".-DFPM_PPC" | sed -e 's|^\.-D|# define |'; echo; \ fi; \ sed -ne 's/^# *define *\(HAVE_.*_ASM\).*/# define \1/p' \ config.h; echo; \ sed -ne 's/^# *define *OPT_\(SPEED\|ACCURACY\).*/# define OPT_\1/p' \ config.h; echo; \ sed -ne 's/^# *define *\(SIZEOF_.*\)/# define \1/p' \ config.h; echo; \ for header in version.h fixed.h bit.h timer.h stream.h frame.h synth.h decoder.h; do \ echo; \ sed -n -f ./mad.h.sed ./$header; \ done; echo; \ echo "# ifdef __cplusplus"; \ echo '}'; \ echo "# endif") >mad.h /usr/bin/make all-recursive /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o version.lo version.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o fixed.lo fixed.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o bit.lo bit.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o timer.lo timer.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o stream.lo stream.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o frame.lo frame.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o synth.lo synth.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o decoder.lo decoder.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o layer12.lo layer12.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o layer3.lo layer3.c /bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c -o huffman.lo huffman.c mkdir .libs mkdir .libs mkdir .libs mkdir .libs mkdir: cannot create directory '.libs': File existsmkdir: mkdir: cannot create directory '.libs'cannot create directory '.libs': File exists: File exists /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c bit.c -fPIC -DPIC -o .libs/bit.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c layer12.c -fPIC -DPIC -o .libs/layer12.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c huffman.c -fPIC -DPIC -o .libs/huffman.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c stream.c -fPIC -DPIC -o .libs/stream.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c decoder.c -fPIC -DPIC -o .libs/decoder.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c layer3.c -fPIC -DPIC -o .libs/layer3.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c frame.c -fPIC -DPIC -o .libs/frame.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c version.c -fPIC -DPIC -o .libs/version.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c synth.c -fPIC -DPIC -o .libs/synth.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c timer.c -fPIC -DPIC -o .libs/timer.o /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c fixed.c -fPIC -DPIC -o .libs/fixed.o layer12.c: In function 'mad_layer_II': layer12.c:465:7: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (allocation[ch][sb]) ^~ layer12.c:467:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' if (mad_bit_nextbyte(&stream->ptr) > stream->next_frame) ^~ /bin/sh ./libtool --mode=link /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -o libmad.la -rpath /usr/lib -version-info 2:1:2 version.lo fixed.lo bit.lo timer.lo stream.lo frame.lo synth.lo decoder.lo layer12.lo layer3.lo huffman.lo /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -shared .libs/version.o .libs/fixed.o .libs/bit.o .libs/timer.o .libs/stream.o .libs/frame.o .libs/synth.o .libs/decoder.o .libs/layer12.o .libs/layer3.o .libs/huffman.o -Wl,-soname -Wl,libmad.so.0 -o .libs/libmad.so.0.2.1 (cd .libs && rm -f libmad.so.0 && ln -s libmad.so.0.2.1 libmad.so.0) (cd .libs && rm -f libmad.so && ln -s libmad.so.0.2.1 libmad.so) creating libmad.la (cd .libs && rm -f libmad.la && ln -s ../libmad.la libmad.la) >>> libmad 0.15.1b Installing to staging directory PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot install -C /home/peko/autobuild/instance-3/output/build/libmad-0.15.1b/ /usr/bin/make install-recursive mkdir -p -- . /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib mkdir -p -- . /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include /bin/sh ./libtool --mode=install /usr/bin/install -c libmad.la /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmad.la /usr/bin/install -c -m 644 mad.h /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/mad.h /usr/bin/install -c .libs/libmad.so.0.2.1 /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmad.so.0.2.1 (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && rm -f libmad.so.0 && ln -s libmad.so.0.2.1 libmad.so.0) (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && rm -f libmad.so && ln -s libmad.so.0.2.1 libmad.so) /usr/bin/install -c .libs/libmad.lai /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmad.la libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/install -D package/libmad/mad.pc /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig/mad.pc >>> libmad 0.15.1b Fixing libtool files >>> libmad 0.15.1b Installing to target PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/target install -C /home/peko/autobuild/instance-3/output/build/libmad-0.15.1b/ /usr/bin/make install-recursive mkdir -p -- . /home/peko/autobuild/instance-3/output/target/usr/lib mkdir -p -- . /home/peko/autobuild/instance-3/output/target/usr/include /bin/sh ./libtool --mode=install /usr/bin/install -c libmad.la /home/peko/autobuild/instance-3/output/target/usr/lib/libmad.la /usr/bin/install -c -m 644 mad.h /home/peko/autobuild/instance-3/output/target/usr/include/mad.h /usr/bin/install -c .libs/libmad.so.0.2.1 /home/peko/autobuild/instance-3/output/target/usr/lib/libmad.so.0.2.1 (cd /home/peko/autobuild/instance-3/output/target/usr/lib && rm -f libmad.so.0 && ln -s libmad.so.0.2.1 libmad.so.0) (cd /home/peko/autobuild/instance-3/output/target/usr/lib && rm -f libmad.so && ln -s libmad.so.0.2.1 libmad.so) /usr/bin/install -c .libs/libmad.lai /home/peko/autobuild/instance-3/output/target/usr/lib/libmad.la libtool: install: warning: remember to run `libtool --finish /usr/lib' libmms-0.6.2.tar.gz: OK (sha256: 01931b62172d7d7050fc9ef9b1b64162f3b6e9f6cc4415170192a32a0b7ea432) >>> libmms 0.6.2 Extracting gzip -d -c /home/peko/autobuild/instance-3/dl/libmms-0.6.2.tar.gz | tar --strip-components=1 -C /home/peko/autobuild/instance-3/output/build/libmms-0.6.2 -xf - >>> libmms 0.6.2 Patching >>> libmms 0.6.2 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-3/output/build/libmms-0.6.2 -name $file); do cp support/gnuconfig/$file $i; done; done >>> libmms 0.6.2 Patching libtool patching file /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/ltmain.sh >>> libmms 0.6.2 Configuring (cd /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ar" AS="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm" CC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ranlib" READELF="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip" OBJCOPY="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-3/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-3/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-3/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-3/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-3/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-3/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-uclibc --host=powerpc-buildroot-linux-uclibc --build=powerpc64le-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc-buildroot-linux-uclibc-strip... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for powerpc-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc accepts -g... yes checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to accept ISO C89... none needed checking dependency style of /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... none checking for library containing strerror... none required checking build system type... powerpc64le-unknown-linux-gnu checking host system type... powerpc-buildroot-linux-uclibc checking for powerpc-buildroot-linux-uclibc-gcc... (cached) /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc checking whether we are using the GNU C compiler... (cached) yes checking whether /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc accepts -g... (cached) yes checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to accept ISO C89... (cached) none needed checking dependency style of /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... (cached) none checking how to run the C preprocessor... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-cpp checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld checking if the linker (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm checking the name lister (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld option to reload object files... -r checking for powerpc-buildroot-linux-uclibc-objdump... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objdump checking how to recognize dependent libraries... pass_all checking for powerpc-buildroot-linux-uclibc-ar... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ar checking for powerpc-buildroot-linux-uclibc-strip... (cached) /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip checking for powerpc-buildroot-linux-uclibc-ranlib... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ranlib checking command to parse /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm output from /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc object... ok checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc static flag -static works... yes checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -c -o file.o... yes checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes checking whether the /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc linker (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking windows.h usability... no checking windows.h presence... no checking for windows.h... no checking winsock2.h usability... no checking winsock2.h presence... no checking for winsock2.h... no checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking for large file support... no configure: creating ./config.status config.status: creating Makefile config.status: creating pkgconfig/Makefile config.status: creating pkgconfig/libmms.pc config.status: creating src/Makefile config.status: creating libmms.spec config.status: creating config.h config.status: creating src/mms_config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls configure done >>> libmms 0.6.2 Building PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 -C /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/ /usr/bin/make all-recursive Making all in src /usr/bin/make all-am /bin/sh ../libtool --tag=CC --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o mms.lo mms.c /bin/sh ../libtool --tag=CC --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o mmsh.lo mmsh.c /bin/sh ../libtool --tag=CC --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o mmsx.lo mmsx.c /bin/sh ../libtool --tag=CC --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o uri.lo uri.c libtool: compile: /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c mms.c -fPIC -DPIC -o .libs/mms.o libtool: compile: /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c mmsh.c -fPIC -DPIC -o .libs/mmsh.o libtool: compile: /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c mmsx.c -fPIC -DPIC -o .libs/mmsx.o libtool: compile: /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c uri.c -fPIC -DPIC -o .libs/uri.o /bin/sh ../libtool --tag=CC --mode=link /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -version-info 0:2:0 -no-undefined -export-dynamic -o libmms.la -rpath /usr/lib mms.lo mmsh.lo mmsx.lo uri.lo -L/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -lglib-2.0 libtool: link: warning: `/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libpcre.la' seems to be moved libtool: link: /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -shared .libs/mms.o .libs/mmsh.o .libs/mmsx.o .libs/uri.o -Wl,-rpath -Wl,/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -Wl,-rpath -Wl,/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -L/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib /home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libglib-2.0.so /home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libpcre.so -lpthread -Wl,-soname -Wl,libmms.so.0 -o .libs/libmms.so.0.0.2 libtool: link: (cd ".libs" && rm -f "libmms.so.0" && ln -s "libmms.so.0.0.2" "libmms.so.0") libtool: link: (cd ".libs" && rm -f "libmms.so" && ln -s "libmms.so.0.0.2" "libmms.so") libtool: link: ( cd ".libs" && rm -f "libmms.la" && ln -s "../libmms.la" "libmms.la" ) Making all in pkgconfig make[4]: Nothing to be done for `all'. make[4]: Nothing to be done for `all-am'. >>> libmms 0.6.2 Installing to staging directory PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot install -C /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/ Making install in src test -z "/usr/lib" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib" test -z "/usr/include/libmms" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmms" test -z "/usr/include/libmms" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmms" /bin/sh ../libtool --mode=install /usr/bin/install -c libmms.la '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib' /usr/bin/install -c -m 644 mms_config.h '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmms' /usr/bin/install -c -m 644 mms.h mmsio.h mmsx.h mmsh.h '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmms' libtool: install: /usr/bin/install -c .libs/libmms.so.0.0.2 /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmms.so.0.0.2 libtool: install: (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libmms.so.0.0.2 libmms.so.0 || { rm -f libmms.so.0 && ln -s libmms.so.0.0.2 libmms.so.0; }; }) libtool: install: (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libmms.so.0.0.2 libmms.so || { rm -f libmms.so && ln -s libmms.so.0.0.2 libmms.so; }; }) libtool: install: /usr/bin/install -c .libs/libmms.lai /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmms.la libtool: install: warning: remember to run `libtool --finish /usr/lib' Making install in pkgconfig make[4]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig" /usr/bin/install -c -m 644 libmms.pc '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. >>> libmms 0.6.2 Fixing libtool files >>> libmms 0.6.2 Installing to target PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/target install -C /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/ Making install in src test -z "/usr/lib" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/target/usr/lib" test -z "/usr/include/libmms" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/target/usr/include/libmms" test -z "/usr/include/libmms" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/target/usr/include/libmms" /bin/sh ../libtool --mode=install /usr/bin/install -c libmms.la '/home/peko/autobuild/instance-3/output/target/usr/lib' /usr/bin/install -c -m 644 mms_config.h '/home/peko/autobuild/instance-3/output/target/usr/include/libmms' /usr/bin/install -c -m 644 mms.h mmsio.h mmsx.h mmsh.h '/home/peko/autobuild/instance-3/output/target/usr/include/libmms' libtool: install: /usr/bin/install -c .libs/libmms.so.0.0.2 /home/peko/autobuild/instance-3/output/target/usr/lib/libmms.so.0.0.2 libtool: install: (cd /home/peko/autobuild/instance-3/output/target/usr/lib && { ln -s -f libmms.so.0.0.2 libmms.so.0 || { rm -f libmms.so.0 && ln -s libmms.so.0.0.2 libmms.so.0; }; }) libtool: install: (cd /home/peko/autobuild/instance-3/output/target/usr/lib && { ln -s -f libmms.so.0.0.2 libmms.so || { rm -f libmms.so && ln -s libmms.so.0.0.2 libmms.so; }; }) libtool: install: /usr/bin/install -c .libs/libmms.lai /home/peko/autobuild/instance-3/output/target/usr/lib/libmms.la libtool: install: warning: remember to run `libtool --finish /usr/lib' Making install in pkgconfig make[4]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/target/usr/lib/pkgconfig" /usr/bin/install -c -m 644 libmms.pc '/home/peko/autobuild/instance-3/output/target/usr/lib/pkgconfig' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. libmnl-1.0.4.tar.bz2: OK (md5: be9b4b5328c6da1bda565ac5dffadb2d) libmnl-1.0.4.tar.bz2: OK (sha1: 2db40dea612e88c62fd321906be40ab5f8f1685a) >>> libmnl 1.0.4 Extracting bzcat /home/peko/autobuild/instance-3/dl/libmnl-1.0.4.tar.bz2 | tar --strip-components=1 -C /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4 -xf - >>> libmnl 1.0.4 Patching >>> libmnl 1.0.4 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4 -name $file); do cp support/gnuconfig/$file $i; done; done >>> libmnl 1.0.4 Patching libtool patching file /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/build-aux/ltmain.sh Hunk #7 succeeded at 6699 (offset 3 lines). Hunk #8 succeeded at 9280 (offset 6 lines). >>> libmnl 1.0.4 Configuring (cd /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ar" AS="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm" CC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ranlib" READELF="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip" OBJCOPY="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-3/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-3/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-3/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-3/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-3/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-3/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-uclibc --host=powerpc-buildroot-linux-uclibc --build=powerpc64le-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking build system type... powerpc64le-unknown-linux-gnu checking host system type... powerpc-buildroot-linux-uclibc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc-buildroot-linux-uclibc-strip... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking how to create a pax tar archive... gnutar checking whether make supports nested variables... (cached) yes checking for powerpc-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc accepts -g... yes checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to accept ISO C89... none needed checking whether /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... none checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld checking if the linker (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm checking the name lister (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert powerpc64le-unknown-linux-gnu file names to powerpc-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert powerpc64le-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld option to reload object files... -r checking for powerpc-buildroot-linux-uclibc-objdump... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objdump checking how to recognize dependent libraries... pass_all checking for powerpc-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for powerpc-buildroot-linux-uclibc-ar... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ar checking for archiver @FILE support... @ checking for powerpc-buildroot-linux-uclibc-strip... (cached) /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip checking for powerpc-buildroot-linux-uclibc-ranlib... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ranlib checking command to parse /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm output from /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc object... ok checking for sysroot... no checking for powerpc-buildroot-linux-uclibc-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-cpp checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc static flag -static works... yes checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -c -o file.o... yes checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes checking whether the /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc linker (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether compiler accepts -fvisibility=hidden... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating include/Makefile config.status: creating include/libmnl/Makefile config.status: creating include/linux/Makefile config.status: creating include/linux/netfilter/Makefile config.status: creating examples/Makefile config.status: creating examples/genl/Makefile config.status: creating examples/kobject/Makefile config.status: creating examples/netfilter/Makefile config.status: creating examples/rtnl/Makefile config.status: creating libmnl.pc config.status: creating doxygen.cfg config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls >>> libmnl 1.0.4 Building PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 -C /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/ /usr/bin/make all-recursive Making all in src CC socket.lo CC callback.lo CC nlmsg.lo CC attr.lo CCLD libmnl.la Making all in include Making all in libmnl make[5]: Nothing to be done for `all'. Making all in linux Making all in netfilter make[6]: Nothing to be done for `all'. make[6]: Nothing to be done for `all-am'. make[5]: Nothing to be done for `all-am'. Making all in examples Making all in genl make[5]: Nothing to be done for `all'. Making all in kobject make[5]: Nothing to be done for `all'. Making all in netfilter make[5]: Nothing to be done for `all'. Making all in rtnl make[5]: Nothing to be done for `all'. make[5]: Nothing to be done for `all-am'. >>> libmnl 1.0.4 Installing to staging directory PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot install -C /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/ Making install in src make[4]: Nothing to be done for `install-data-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libmnl.la '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib' libtool: install: /usr/bin/install -c .libs/libmnl.so.0.2.0 /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmnl.so.0.2.0 libtool: install: (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libmnl.so.0.2.0 libmnl.so.0 || { rm -f libmnl.so.0 && ln -s libmnl.so.0.2.0 libmnl.so.0; }; }) libtool: install: (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libmnl.so.0.2.0 libmnl.so || { rm -f libmnl.so && ln -s libmnl.so.0.2.0 libmnl.so; }; }) libtool: install: /usr/bin/install -c .libs/libmnl.lai /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmnl.la libtool: install: warning: remember to run `libtool --finish /usr/lib' Making install in include Making install in libmnl make[5]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmnl' /usr/bin/install -c -m 644 libmnl.h '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmnl' Making install in linux Making install in netfilter make[6]: Nothing to be done for `install-exec-am'. make[6]: Nothing to be done for `install-data-am'. make[6]: Nothing to be done for `install-exec-am'. make[6]: Nothing to be done for `install-data-am'. make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in examples Making install in genl make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in kobject make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in netfilter make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in rtnl make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. make[4]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 libmnl.pc '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' >>> libmnl 1.0.4 Fixing libtool files >>> libmnl 1.0.4 Installing to target PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/target install -C /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/ Making install in src make[4]: Nothing to be done for `install-data-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/target/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libmnl.la '/home/peko/autobuild/instance-3/output/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libmnl.so.0.2.0 /home/peko/autobuild/instance-3/output/target/usr/lib/libmnl.so.0.2.0 libtool: install: (cd /home/peko/autobuild/instance-3/output/target/usr/lib && { ln -s -f libmnl.so.0.2.0 libmnl.so.0 || { rm -f libmnl.so.0 && ln -s libmnl.so.0.2.0 libmnl.so.0; }; }) libtool: install: (cd /home/peko/autobuild/instance-3/output/target/usr/lib && { ln -s -f libmnl.so.0.2.0 libmnl.so || { rm -f libmnl.so && ln -s libmnl.so.0.2.0 libmnl.so; }; }) libtool: install: /usr/bin/install -c .libs/libmnl.lai /home/peko/autobuild/instance-3/output/target/usr/lib/libmnl.la libtool: install: warning: remember to run `libtool --finish /usr/lib' Making install in include Making install in libmnl make[5]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/target/usr/include/libmnl' /usr/bin/install -c -m 644 libmnl.h '/home/peko/autobuild/instance-3/output/target/usr/include/libmnl' Making install in linux Making install in netfilter make[6]: Nothing to be done for `install-exec-am'. make[6]: Nothing to be done for `install-data-am'. make[6]: Nothing to be done for `install-exec-am'. make[6]: Nothing to be done for `install-data-am'. make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in examples Making install in genl make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in kobject make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in netfilter make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in rtnl make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. make[4]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 libmnl.pc '/home/peko/autobuild/instance-3/output/target/usr/lib/pkgconfig' libmpdclient-2.14.tar.xz: OK (sha256: 0a84e2791bfe3077cf22ee1784c805d5bb550803dffe56a39aa3690a38061372) >>> libmpdclient 2.14 Extracting xzcat /home/peko/autobuild/instance-3/dl/libmpdclient-2.14.tar.xz | tar --strip-components=1 -C /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14 -xf - >>> libmpdclient 2.14 Patching >>> libmpdclient 2.14 Configuring rm -rf /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14/build mkdir -p /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14/build PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" meson --prefix=/usr --buildtype release --cross-file /home/peko/autobuild/instance-3/output/host/etc/meson/cross-compilation.conf /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14 /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14/build /bin/sh: meson: command not found make[1]: *** [/home/peko/autobuild/instance-3/output/build/libmpdclient-2.14/.stamp_configured] Error 127 make: *** [_all] Error 2 make: Leaving directory `/home/peko/autobuild/instance-3/buildroot'