installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \ /bin/sh /home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/install-sh -d /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/sane/${dir} ; \ done make[6]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' Making install in frontend make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/frontend' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/frontend' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c scanimage '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin' libtool: install: /usr/bin/install -c scanimage /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin/scanimage /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/sbin' /bin/sh ../libtool --mode=install /usr/bin/install -c saned '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/sbin' libtool: install: /usr/bin/install -c saned /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/sbin/saned make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/frontend' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/frontend' Making install in tools make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' /usr/bin/make install-am make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin' libtool: install: /usr/bin/install -c sane-find-scanner /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin/umax_pp /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin' /usr/bin/install -c sane-config '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 sane-backends.pc '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' Making install in po make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/po' if test "sane-backends" = "gettext-tools"; then \ /usr/bin/mkdir -p /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/po' Making install in testsuite make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' Making install in backend make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[6]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[6]: Nothing to be done for 'install-exec-am'. make[6]: Nothing to be done for 'install-data-am'. make[6]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' Making install in sanei make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/sanei' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/sanei' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/sanei' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/sanei' Making install in tools make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/tools' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/tools' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/tools' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/tools' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/doc/sane-backends/ChangeLogs' /usr/bin/install -c -m 644 ChangeLogs/ChangeLog-1.0.28 ChangeLogs/ChangeLog-1.0.27 ChangeLogs/ChangeLog-1.0.25 ChangeLogs/ChangeLog-1.0.24 ChangeLogs/ChangeLog-1.0.23 ChangeLogs/ChangeLog-1.0.22 ChangeLogs/ChangeLog-1.0.21 ChangeLogs/ChangeLog-1.0.20 ChangeLogs/ChangeLog-1.0.19 ChangeLogs/ChangeLog-1.0.18 ChangeLogs/ChangeLog-1.0.17 ChangeLogs/ChangeLog-1.0.16 ChangeLogs/ChangeLog-1.0.15 ChangeLogs/ChangeLog-1.0.14 ChangeLogs/ChangeLog-1.0.13 ChangeLogs/ChangeLog-1.0.12 ChangeLogs/ChangeLog-1.0.11 ChangeLogs/ChangeLog-1.0.10 ChangeLogs/ChangeLog-1.0.9 ChangeLogs/ChangeLog-1.0.8 ChangeLogs/ChangeLog-1.0.7 ChangeLogs/ChangeLog-1.0.6 ChangeLogs/ChangeLog-1.0.5 ChangeLogs/ChangeLog-1.0.4 ChangeLogs/ChangeLog-1.0.3 ChangeLogs/ChangeLog-1.0.2 ChangeLogs/ChangeLog-1.0.1 ChangeLogs/ChangeLog-1.0.0 '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/doc/sane-backends/ChangeLogs' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta ChangeLog '/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/doc/sane-backends' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[2]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[1]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' >>> sane-backends 1.0.32 Fixing package configuration files >>> sane-backends 1.0.32 Fixing libtool files for la in $(find /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /usr/bin/sed -i -e "s:/home/autobuild/autobuild/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/autobuild/autobuild/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sane-backends 1.0.32 Installing to target PATH="/home/autobuild/autobuild/instance-1/output-1/host/bin:/home/autobuild/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /usr/bin/make -j1 DESTDIR=/home/autobuild/autobuild/instance-1/output-1/target install -C /home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/ make[1]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' /usr/bin/make install-recursive make[2]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' Making install in include make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/include' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/include' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/include' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/include/sane' /usr/bin/install -c -m 644 sane/sane.h sane/saneopts.h '/home/autobuild/autobuild/instance-1/output-1/target/usr/include/sane' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/include' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/include' Making install in lib make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/lib' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/lib' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/lib' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/lib' Making install in sanei make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/sanei' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/sanei' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/sanei' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/sanei' Making install in backend make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' /usr/bin/make install-am make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/lib' /bin/sh ../libtool --silent --mode=install /usr/bin/install -c libsane.la '/home/autobuild/autobuild/instance-1/output-1/target/usr/lib' libtool: warning: remember to run 'libtool --finish /usr/lib' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/lib/sane' /bin/sh ../libtool --silent --mode=install /usr/bin/install -c libsane-abaton.la libsane-agfafocus.la libsane-apple.la libsane-artec.la libsane-artec_eplus48u.la libsane-as6e.la libsane-avision.la libsane-bh.la libsane-canon.la libsane-canon630u.la libsane-canon_dr.la libsane-canon_lide70.la libsane-cardscan.la libsane-coolscan.la libsane-coolscan2.la libsane-coolscan3.la libsane-dc25.la libsane-dmc.la libsane-epjitsu.la libsane-epson.la libsane-epson2.la libsane-fujitsu.la libsane-gt68xx.la libsane-hp.la libsane-hp3500.la libsane-hp3900.la libsane-hp4200.la libsane-hp5400.la libsane-hp5590.la libsane-hpljm1005.la libsane-hs2p.la libsane-ibm.la libsane-kodak.la libsane-kodakaio.la libsane-kvs1025.la libsane-kvs20xx.la libsane-kvs40xx.la libsane-leo.la libsane-lexmark.la libsane-ma1509.la libsane-magicolor.la libsane-matsushita.la libsane-microtek.la libsane-microtek2.la libsane-mustek.la libsane-mustek_usb.la libsane-mustek_usb2.la libsane-nec.la libsane-net.la libsane-niash.la libsane-pie.la libsane-pieusb.la libsane-plustek.la libsane-plustek_pp.la libsane-ricoh.la libsane-ricoh2.la libsane-rts8891.la libsane-s9036.la libsane-sceptre.la libsane-sharp.la libsane-sm3600.la libsane-sm3840.la libsane-snapscan.la libsane-sp15c.la libsane-st400.la libsane-stv680.la libsane-tamarack.la libsane-teco1.la libsane-teco2.la libsane-teco3.la libsane-test.la libsane-u12.la libsane-umax.la libsane-umax_pp.la libsane-umax1220u.la libsane-xerox_mfp.la libsane-p5.la libsane-dll.la '/home/autobuild/autobuild/instance-1/output-1/target/usr/lib/sane' libtool: warning: remember to run 'libtool --finish /usr/lib/sane' /usr/bin/make install-data-hook make[6]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' rm -f /home/autobuild/autobuild/instance-1/output-1/target/usr/lib/sane/libsane.* test -z "/etc/sane.d" || /usr/bin/mkdir -p "/home/autobuild/autobuild/instance-1/output-1/target/etc/sane.d" test -z "/etc/sane.d/dll.d" || /usr/bin/mkdir -p "/home/autobuild/autobuild/instance-1/output-1/target/etc/sane.d/dll.d" installing abaton.conf in /etc/sane.d/abaton.conf... installing agfafocus.conf in /etc/sane.d/agfafocus.conf... installing apple.conf in /etc/sane.d/apple.conf... installing artec.conf in /etc/sane.d/artec.conf... installing artec_eplus48u.conf in /etc/sane.d/artec_eplus48u.conf... installing avision.conf in /etc/sane.d/avision.conf... installing bh.conf in /etc/sane.d/bh.conf... installing canon.conf in /etc/sane.d/canon.conf... installing canon630u.conf in /etc/sane.d/canon630u.conf... installing canon_dr.conf in /etc/sane.d/canon_dr.conf... installing canon_lide70.conf in /etc/sane.d/canon_lide70.conf... installing cardscan.conf in /etc/sane.d/cardscan.conf... installing coolscan.conf in /etc/sane.d/coolscan.conf... installing coolscan2.conf in /etc/sane.d/coolscan2.conf... installing coolscan3.conf in /etc/sane.d/coolscan3.conf... installing dc25.conf in /etc/sane.d/dc25.conf... installing dmc.conf in /etc/sane.d/dmc.conf... installing epjitsu.conf in /etc/sane.d/epjitsu.conf... installing epson.conf in /etc/sane.d/epson.conf... installing epson2.conf in /etc/sane.d/epson2.conf... installing fujitsu.conf in /etc/sane.d/fujitsu.conf... installing gt68xx.conf in /etc/sane.d/gt68xx.conf... installing hp.conf in /etc/sane.d/hp.conf... installing hp3900.conf in /etc/sane.d/hp3900.conf... installing hp4200.conf in /etc/sane.d/hp4200.conf... installing hp5400.conf in /etc/sane.d/hp5400.conf... installing hs2p.conf in /etc/sane.d/hs2p.conf... installing ibm.conf in /etc/sane.d/ibm.conf... installing kodak.conf in /etc/sane.d/kodak.conf... installing kodakaio.conf in /etc/sane.d/kodakaio.conf... installing kvs1025.conf in /etc/sane.d/kvs1025.conf... installing leo.conf in /etc/sane.d/leo.conf... installing lexmark.conf in /etc/sane.d/lexmark.conf... installing ma1509.conf in /etc/sane.d/ma1509.conf... installing magicolor.conf in /etc/sane.d/magicolor.conf... installing matsushita.conf in /etc/sane.d/matsushita.conf... installing microtek.conf in /etc/sane.d/microtek.conf... installing microtek2.conf in /etc/sane.d/microtek2.conf... installing mustek.conf in /etc/sane.d/mustek.conf... installing mustek_usb.conf in /etc/sane.d/mustek_usb.conf... installing nec.conf in /etc/sane.d/nec.conf... installing net.conf in /etc/sane.d/net.conf... installing pie.conf in /etc/sane.d/pie.conf... installing pieusb.conf in /etc/sane.d/pieusb.conf... installing plustek.conf in /etc/sane.d/plustek.conf... installing plustek_pp.conf in /etc/sane.d/plustek_pp.conf... installing ricoh.conf in /etc/sane.d/ricoh.conf... installing rts8891.conf in /etc/sane.d/rts8891.conf... installing s9036.conf in /etc/sane.d/s9036.conf... installing sceptre.conf in /etc/sane.d/sceptre.conf... installing sharp.conf in /etc/sane.d/sharp.conf... installing sm3840.conf in /etc/sane.d/sm3840.conf... installing snapscan.conf in /etc/sane.d/snapscan.conf... installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \ /bin/sh /home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/install-sh -d /home/autobuild/autobuild/instance-1/output-1/target/usr/share/sane/${dir} ; \ done make[6]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/backend' Making install in frontend make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/frontend' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/frontend' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c scanimage '/home/autobuild/autobuild/instance-1/output-1/target/usr/bin' libtool: install: /usr/bin/install -c scanimage /home/autobuild/autobuild/instance-1/output-1/target/usr/bin/scanimage /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/sbin' /bin/sh ../libtool --mode=install /usr/bin/install -c saned '/home/autobuild/autobuild/instance-1/output-1/target/usr/sbin' libtool: install: /usr/bin/install -c saned /home/autobuild/autobuild/instance-1/output-1/target/usr/sbin/saned make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/frontend' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/frontend' Making install in tools make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' /usr/bin/make install-am make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/autobuild/autobuild/instance-1/output-1/target/usr/bin' libtool: install: /usr/bin/install -c sane-find-scanner /home/autobuild/autobuild/instance-1/output-1/target/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/autobuild/autobuild/instance-1/output-1/target/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/autobuild/autobuild/instance-1/output-1/target/usr/bin/umax_pp /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/install -c sane-config '/home/autobuild/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 sane-backends.pc '/home/autobuild/autobuild/instance-1/output-1/target/usr/lib/pkgconfig' make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/tools' Making install in po make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/po' if test "sane-backends" = "gettext-tools"; then \ /usr/bin/mkdir -p /home/autobuild/autobuild/instance-1/output-1/target/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/autobuild/autobuild/instance-1/output-1/target/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/autobuild/autobuild/instance-1/output-1/target/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/po' Making install in testsuite make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' Making install in backend make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[6]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[6]: Nothing to be done for 'install-exec-am'. make[6]: Nothing to be done for 'install-data-am'. make[6]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/backend' Making install in sanei make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/sanei' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/sanei' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/sanei' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/sanei' Making install in tools make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/tools' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/tools' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/tools' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite/tools' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[5]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32/testsuite' make[3]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[4]: Entering directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/share/doc/sane-backends/ChangeLogs' /usr/bin/install -c -m 644 ChangeLogs/ChangeLog-1.0.28 ChangeLogs/ChangeLog-1.0.27 ChangeLogs/ChangeLog-1.0.25 ChangeLogs/ChangeLog-1.0.24 ChangeLogs/ChangeLog-1.0.23 ChangeLogs/ChangeLog-1.0.22 ChangeLogs/ChangeLog-1.0.21 ChangeLogs/ChangeLog-1.0.20 ChangeLogs/ChangeLog-1.0.19 ChangeLogs/ChangeLog-1.0.18 ChangeLogs/ChangeLog-1.0.17 ChangeLogs/ChangeLog-1.0.16 ChangeLogs/ChangeLog-1.0.15 ChangeLogs/ChangeLog-1.0.14 ChangeLogs/ChangeLog-1.0.13 ChangeLogs/ChangeLog-1.0.12 ChangeLogs/ChangeLog-1.0.11 ChangeLogs/ChangeLog-1.0.10 ChangeLogs/ChangeLog-1.0.9 ChangeLogs/ChangeLog-1.0.8 ChangeLogs/ChangeLog-1.0.7 ChangeLogs/ChangeLog-1.0.6 ChangeLogs/ChangeLog-1.0.5 ChangeLogs/ChangeLog-1.0.4 ChangeLogs/ChangeLog-1.0.3 ChangeLogs/ChangeLog-1.0.2 ChangeLogs/ChangeLog-1.0.1 ChangeLogs/ChangeLog-1.0.0 '/home/autobuild/autobuild/instance-1/output-1/target/usr/share/doc/sane-backends/ChangeLogs' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-1/output-1/target/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta ChangeLog '/home/autobuild/autobuild/instance-1/output-1/target/usr/share/doc/sane-backends' make[4]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[3]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[2]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' make[1]: Leaving directory '/home/autobuild/autobuild/instance-1/output-1/build/sane-backends-1.0.32' >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/autobuild/autobuild/instance-1/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g0'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g0'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-1/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc%g" -e "s%@TARGET_CXX@%/home/autobuild/autobuild/instance-1/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-1/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ar%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%xtensa%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/autobuild/autobuild/instance-1/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-1/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/autobuild/autobuild/instance-1/output-1/host%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-1/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-1/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc%g" -e "s%@TARGET_CXX@%/home/autobuild/autobuild/instance-1/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-1/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ar%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%xtensa%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g0'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g0'%g" -e "s%@BR2_CMAKE@%/home/autobuild/autobuild/instance-1/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-1/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/autobuild/autobuild/instance-1/output-1/host%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-1/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 #~' /home/autobuild/autobuild/instance-1/output-1/target/etc/inittab /usr/bin/sed -i -e '/^[^#].*-o remount,rw \/$/s~^~#~' /home/autobuild/autobuild/instance-1/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/autobuild/autobuild/instance-1/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/ash$' /home/autobuild/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/ash" >> /home/autobuild/autobuild/instance-1/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/autobuild/autobuild/instance-1/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/hush$' /home/autobuild/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/hush" >> /home/autobuild/autobuild/instance-1/output-1/target/etc/shells; fi mkdir -p /home/autobuild/autobuild/instance-1/output-1/target/etc echo "buildroot" > /home/autobuild/autobuild/instance-1/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/autobuild/autobuild/instance-1/output-1/target/etc/hosts mkdir -p /home/autobuild/autobuild/instance-1/output-1/target/etc echo "Welcome to Buildroot" > /home/autobuild/autobuild/instance-1/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root:"*":, /home/autobuild/autobuild/instance-1/output-1/target/etc/shadow rm -f /home/autobuild/autobuild/instance-1/output-1/target/bin/sh if [ -x /home/autobuild/autobuild/instance-1/output-1/target/sbin/swapon -a -x /home/autobuild/autobuild/instance-1/output-1/target/sbin/swapoff ]; then /usr/bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/autobuild/autobuild/instance-1/output-1/target/etc/inittab; else /usr/bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/autobuild/autobuild/instance-1/output-1/target/etc/inittab; fi rm -rf /home/autobuild/autobuild/instance-1/output-1/target/usr/include /home/autobuild/autobuild/instance-1/output-1/target/usr/share/aclocal \ /home/autobuild/autobuild/instance-1/output-1/target/usr/lib/pkgconfig /home/autobuild/autobuild/instance-1/output-1/target/usr/share/pkgconfig \ /home/autobuild/autobuild/instance-1/output-1/target/usr/lib/cmake /home/autobuild/autobuild/instance-1/output-1/target/usr/share/cmake \ /home/autobuild/autobuild/instance-1/output-1/target/usr/doc find /home/autobuild/autobuild/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/autobuild/autobuild/instance-1/output-1/target/lib/ /home/autobuild/autobuild/instance-1/output-1/target/usr/lib/ /home/autobuild/autobuild/instance-1/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/autobuild/autobuild/instance-1/output-1/target/usr/share/gdb rm -rf /home/autobuild/autobuild/instance-1/output-1/target/usr/share/bash-completion rm -rf /home/autobuild/autobuild/instance-1/output-1/target/etc/bash_completion.d rm -rf /home/autobuild/autobuild/instance-1/output-1/target/usr/share/zsh rm -rf /home/autobuild/autobuild/instance-1/output-1/target/usr/man /home/autobuild/autobuild/instance-1/output-1/target/usr/share/man rm -rf /home/autobuild/autobuild/instance-1/output-1/target/usr/info /home/autobuild/autobuild/instance-1/output-1/target/usr/share/info rm -rf /home/autobuild/autobuild/instance-1/output-1/target/usr/doc /home/autobuild/autobuild/instance-1/output-1/target/usr/share/doc rm -rf /home/autobuild/autobuild/instance-1/output-1/target/usr/share/gtk-doc rmdir /home/autobuild/autobuild/instance-1/output-1/target/usr/share 2>/dev/null || true rm -rf /home/autobuild/autobuild/instance-1/output-1/target/lib/debug /home/autobuild/autobuild/instance-1/output-1/target/usr/lib/debug find /home/autobuild/autobuild/instance-1/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/autobuild/autobuild/instance-1/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/autobuild/autobuild/instance-1/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/autobuild/autobuild/instance-1/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/autobuild/autobuild/instance-1/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2022.05-652-g2d991c92f5"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2022.08-git"; \ echo "PRETTY_NAME=\"Buildroot 2022.08-git\"" \ ) > /home/autobuild/autobuild/instance-1/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/autobuild/autobuild/instance-1/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/autobuild/autobuild/instance-1/output-1/per-package /home/autobuild/autobuild/instance-1/buildroot/support/scripts/fix-rpath target touch /home/autobuild/autobuild/instance-1/output-1/target/usr ln -snf /home/autobuild/autobuild/instance-1/output-1/host/xtensa-buildroot-linux-uclibc/sysroot /home/autobuild/autobuild/instance-1/output-1/staging make: Leaving directory '/home/autobuild/autobuild/instance-1/buildroot' make: Entering directory '/home/autobuild/autobuild/instance-1/buildroot' >>> Buildroot 2022.05-652-g2d991c92f5 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> busybox 1.35.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 11.3.0 Collecting legal info >>> host-binutils 2.37 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-gmp 6.2.1 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-mpc 1.2.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.0 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> uclibc 1.0.41 Collecting legal info COPYING.LIB: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> host-gcc-initial 11.3.0 Collecting legal info >>> linux-headers 5.17.15 Collecting legal info COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0) LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79) LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f) >>> ca-certificates 20211016 Collecting legal info debian/copyright: OK (sha256: e85e1bcad3a915dc7e6f41412bc5bdeba275cadd817896ea0451f2140a93967c) >>> host-openssl Collecting legal info >>> host-libopenssl 1.1.1q Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.12 Collecting legal info README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd) >>> host-python3 3.10.5 Collecting legal info LICENSE: OK (sha256: f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b) >>> host-autoconf 2.71 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-autoconf-archive 2021.02.19 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-expat 2.4.8 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> host-libffi 3.4.2 Collecting legal info LICENSE: OK (sha256: a61d06e8f7be57928e71e800eb9273b05cb8868c484108afe41e4305bb320dde) >>> flickcurl 1.26 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) LICENSE-2.0.txt: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) LICENSE.html: OK (sha256: 3590f30b0fb9446a1f0a7ea5bcbb5786fa66fa362800f53d2575875d74b91909) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> libcurl 7.84.0 Collecting legal info COPYING: OK (sha256: 321b1a09ebc30410f2e837c072e5521cf7095b757193af4a7dae1086e36ed31a) >>> openssl Collecting legal info >>> libopenssl 1.1.1q Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> zlib Collecting legal info >>> libzlib 1.2.12 Collecting legal info README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd) >>> libxml2 2.9.14 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> initscripts Collecting legal info >>> libb64 1.2.1 Collecting legal info LICENSE: OK (sha256: 834b7afa1b3c40289a3be775d3625016be1c0d7ea7a4a26c1eb207f53dc961d8) >>> libenca 1.19 Collecting legal info COPYING: OK (sha256: 87f1bd4a52b4029476b684fcdd51fed3c6b2540e462d3c2d3bfc9be4558b2825) >>> liblockfile 1.17 Collecting legal info COPYRIGHT: OK (sha256: 3d080ab931103a823e6b9b788ccbc3e9d44797bd54546f3feebfd305f90de46a) licenses/GPL-2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) licenses/LGPL-2: OK (sha256: b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c) >>> libminiupnpc 2.2.3 Collecting legal info LICENSE: OK (sha256: 90bb92bf524970569296022fea562c85a4ec4d99a16f3aef2144d13d7087b631) >>> host-cmake 3.22.3 Collecting legal info Copyright.txt: OK (sha256: f1a4326266aada65b307dac05161a9d02d3dba4fb08b50cb26e3c24cc8a86e97) >>> libmnl 1.0.5 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libnetfilter_acct 1.0.3 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> linuxconsoletools 1.8.1 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> lockfile-progs 0.1.19 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) >>> logsurfer 1.8 Collecting legal info >>> memstat 1.0 Collecting legal info debian/copyright: OK (sha256: 5e5db2a2fab637bbbc5d2400141fcb9f1b4b55540d025c2dc54378dc497cb524) >>> oniguruma 6.9.8 Collecting legal info COPYING: OK (sha256: 70ba5469ea0bab6e18a32d7009068f996503168d27be57747e08da34337ff26f) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> sane-backends 1.0.32 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) WARNING: the Buildroot source code has not been saved WARNING: gcc-final-11.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-11.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: logsurfer-1.8: cannot save license (LOGSURFER_LICENSE_FILES not defined) Legal info produced in /home/autobuild/autobuild/instance-1/output-1/legal-info make: Leaving directory '/home/autobuild/autobuild/instance-1/buildroot'