>>> gerbera 1.3.2 Downloading
--2019-11-14 07:03:04--  https://github.com/gerbera/gerbera/archive/v1.3.2/gerbera-1.3.2.tar.gz
Resolving github.com (github.com)... 140.82.118.3
Connecting to github.com (github.com)|140.82.118.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/gerbera/gerbera/tar.gz/v1.3.2 [following]
--2019-11-14 07:03:04--  https://codeload.github.com/gerbera/gerbera/tar.gz/v1.3.2
Resolving codeload.github.com (codeload.github.com)... 140.82.114.10
Connecting to codeload.github.com (codeload.github.com)|140.82.114.10|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: '/home/buildroot/autobuild/run/instance-0/output-1/build/.gerbera-1.3.2.tar.gz.p6ETzR/output'

     0K .......... .......... .......... .......... ..........  240K
    50K .......... .......... .......... .......... ..........  600K
   100K .......... .......... .......... .......... .......... 20.3M
   150K .......... .......... .......... .......... ..........  111M
   200K .......... .......... .......... .......... ..........  590K
   250K .......... .......... .......... .......... ..........  108M
   300K .......... .......... .......... .......... ..........  601K
   350K .......... .......... .......... .......... ..........  212M
   400K .......... .......... .......... .......... .......... 46.3M
   450K .......... .......... .......... .......... ..........  235M
   500K .......... .......... .......... .......... .......... 82.5M
   550K .......... .......... .......... .......... .......... 83.0M
   600K .......... .......... .......... .......... ..........  229M
   650K .......... .......... .......... .......... .......... 94.3M
   700K .......... .......... .......... .......... ..........  572K
   750K .......... .......... .......... .......... ..........  218M
   800K .......... .......... .......... .......... ..........  232M
   850K .......... .......... .......... .......... ..........  239M
   900K .......... .......... .......... .......... ..........  256M
   950K .......... .......... .......... .......... ..........  254M
  1000K .......... .......... .......... .......... ..........  230M
  1050K .......... .......... .......... .......... ..........  252M
  1100K .......... .......... .......... .......... ..........  611K
  1150K .......... .......... .......... .......... ..........  105M
  1200K .......... .......... .......... .......... .......... 63.2M
  1250K .......... .......... .......... .......... .......... 81.8M
  1300K .......... .......... .......... .......... ..........  217M
  1350K .......... .......... .......... .......... ..........  302K
  1400K .......... .......... .......... .......... ..........  178M
  1450K .......... .......... .......... .......... ..........  186M
  1500K .......... .......... .......... .......... ..........  211M
  1550K .......... .......... .......... .......... ..........  249M
  1600K .......... .......... .......... .......... ..........  187M
  1650K .......... .......... .......... .......... .......... 16.4M
  1700K .......... .......... .......... .......... ..........  243M
  1750K .......... .......... .......... .......... .......... 97.9M
  1800K .......... .......... .......... .......... ..........  227M
  1850K .......... .......... .......... .......... ..........  217M
  1900K .......... .......... .......... .......... ..........  220M
  1950K .......... .......... .......... .......... ..........  219M
  2000K .......... .......... .......... .......... ..........  226M
  2050K .......... .......... .......... .......... ..........  219M
  2100K .......... .......... .......... .......... ..........  229M
  2150K .......... .......... .......... .......... ..........  633K
  2200K .......... .......... .......... .......... ..........  168M
  2250K .......... .......... .......... .......... .......... 19.8M
  2300K .......... .......... .......... .......... .......... 32.6M
  2350K .......... .......... .......... .......... .......... 78.3M
  2400K .......... .......... .......... .......... ..........  168M
  2450K .......... .......... .......... .......... ..........  111M
  2500K .......... .......... .......... .......... .......... 73.6M
  2550K .......... .......... .......... .......... ..........  631K
  2600K .......... .......... .......... .......... .......... 95.9M
  2650K .......... .......... .......... .......... .......... 13.6M
  2700K .......... .......... .......... .......... .......... 97.7M
  2750K .......... .......... .........                         199M=1.0s

2019-11-14 07:03:05 (2.77 MB/s) - '/home/buildroot/autobuild/run/instance-0/output-1/build/.gerbera-1.3.2.tar.gz.p6ETzR/output' saved [2845728]

gerbera-1.3.2.tar.gz: OK (sha256: 47515d5d9b640c31d114c74aa5532c3d6f40d6a8a60b00f1cb1cef7629d8d9db)
>>> gerbera 1.3.2 Extracting
gzip -d -c /home/buildroot/autobuild/run/instance-0/dl/gerbera/gerbera-1.3.2.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2   -xf -
>>> gerbera 1.3.2 Patching
>>> gerbera 1.3.2 Configuring
(mkdir -p /home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/ && cd /home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/ && rm -f CMakeCache.txt && PATH="/home/buildroot/autobuild/run/instance-0/output-1/host/bin:/home/buildroot/autobuild/run/instance-0/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /home/buildroot/autobuild/run/instance-0/output-1/host/bin/cmake /home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/ -DCMAKE_TOOLCHAIN_FILE="/home/buildroot/autobuild/run/instance-0/output-1/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON  -DWITH_DEBUG=OFF -DWITH_JS=OFF -DCMAKE_CXX_FLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os   -latomic" -DWITH_EXIV2=OFF -DWITH_AVCODEC=ON -DWITH_MAGIC=OFF -DWITH_CURL=ON -DWITH_EXIF=ON -DWITH_MYSQL=ON -DWITH_SYSTEMD=OFF -DWITH_TAGLIB=OFF )
-- The C compiler identification is GNU 7.4.0
-- The CXX compiler identification is GNU 7.4.0
-- Check for working C compiler: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/m68k-linux-gcc
-- Check for working C compiler: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/m68k-linux-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/m68k-linux-g++
-- Check for working CXX compiler: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/m68k-linux-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Looking for C++ include optional
-- Looking for C++ include optional - found
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE  
-- Performing Test ICONV_SECOND_ARGUMENT_IS_CONST
-- Performing Test ICONV_SECOND_ARGUMENT_IS_CONST - Failed
-- Found Iconv: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libiconv.a
-- Found PkgConfig: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/pkg-config (found version "1.6.1") 
-- Looking for BSD native UUID
-- Looking for libuuid
-- Looking for libuuid - found
-- Found UUID: TRUE  
-- Looking for native LFS support
-- Looking for native LFS support - found
-- Found LFS: TRUE  
-- Found UPnP: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libupnp.so (found version "1.8.5") 
CMake Warning at CMakeLists.txt:360 (message):
  

   !! It is strongly recommended to build libupnp with --enable-reuseaddr !!

  Without this option Gerbera will be unable to restart with the same port
  number.


-- Found EXPAT: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libexpat.so (found version "2.2.9") 
-- Found Sqlite3: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libsqlite3.so
-- Looking for native inotify
-- Looking for native inotify - found
-- MySQL Include dir: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/include/mysql  library dir: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib
-- MySQL client libraries: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libmysqlclient_r.so
-- Checking for modules 'libavformat;libavutil'
--   Found libavformat, version 58.29.100
--   Found libavutil, version 56.31.100
-- Found EXIF: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libexif.so (found version "0.6.21") 
-- Found ZLIB: /home/buildroot/autobuild/run/instance-0/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/libz.so (found version "1.2.11") 
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_DOC
    BUILD_DOCS
    BUILD_EXAMPLE
    BUILD_EXAMPLES
    BUILD_TEST
    BUILD_TESTING
    BUILD_TESTS


-- Build files have been written to: /home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2
>>> gerbera 1.3.2 Building
PATH="/home/buildroot/autobuild/run/instance-0/output-1/host/bin:/home/buildroot/autobuild/run/instance-0/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /usr/bin/make -j4  -C /home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/
make[1]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2'
make[2]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2'
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2'
Scanning dependencies of target libgerbera
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2'
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2'
[  1%] Building CXX object CMakeFiles/libgerbera.dir/src/action_request.cc.o
[  2%] Building CXX object CMakeFiles/libgerbera.dir/src/atrailers_content_handler.cc.o
[  3%] Building CXX object CMakeFiles/libgerbera.dir/src/atrailers_service.cc.o
[  4%] Building CXX object CMakeFiles/libgerbera.dir/src/autoscan.cc.o
[  5%] Building CXX object CMakeFiles/libgerbera.dir/src/autoscan_inotify.cc.o
[  5%] Building CXX object CMakeFiles/libgerbera.dir/src/buffered_io_handler.cc.o
[  6%] Building CXX object CMakeFiles/libgerbera.dir/src/cached_url.cc.o
[  7%] Building CXX object CMakeFiles/libgerbera.dir/src/cds_objects.cc.o
/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/src/autoscan_inotify.cc: In constructor 'AutoscanInotify::AutoscanInotify()':
/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/src/autoscan_inotify.cc:53:17: warning: unused variable 'max_watches' [-Wunused-variable]
             int max_watches = trim_string(read_text_file(_(INOTIFY_MAX_USER_WATCHES_FILE))).toInt();
                 ^~~~~~~~~~~
/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/src/buffered_io_handler.cc: In member function 'virtual void BufferedIOHandler::threadProc()':
/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/src/buffered_io_handler.cc:181:9: warning: 'readBytes' may be used uninitialized in this function [-Wmaybe-uninitialized]
         if (readBytes < 0)
         ^~
[  8%] Building CXX object CMakeFiles/libgerbera.dir/src/cds_resource.cc.o
[  9%] Building CXX object CMakeFiles/libgerbera.dir/src/config/config_generator.cc.o
[ 10%] Building CXX object CMakeFiles/libgerbera.dir/src/config_manager.cc.o
[ 11%] Building CXX object CMakeFiles/libgerbera.dir/src/content_manager.cc.o
[ 11%] Building C object CMakeFiles/libgerbera.dir/src/contrib/md5.c.o
[ 12%] Building CXX object CMakeFiles/libgerbera.dir/src/curl_io_handler.cc.o
[ 13%] Building CXX object CMakeFiles/libgerbera.dir/src/dictionary.cc.o
[ 14%] Building CXX object CMakeFiles/libgerbera.dir/src/exceptions.cc.o
[ 15%] Building CXX object CMakeFiles/libgerbera.dir/src/fd_io_handler.cc.o
[ 16%] Building CXX object CMakeFiles/libgerbera.dir/src/file_io_handler.cc.o
[ 17%] Building CXX object CMakeFiles/libgerbera.dir/src/file_request_handler.cc.o
[ 17%] Building CXX object CMakeFiles/libgerbera.dir/src/filesystem.cc.o
[ 18%] Building CXX object CMakeFiles/libgerbera.dir/src/generic_task.cc.o
[ 19%] Building CXX object CMakeFiles/libgerbera.dir/src/handler/headers.cc.o
[ 20%] Building CXX object CMakeFiles/libgerbera.dir/src/io_handler_buffer_helper.cc.o
[ 21%] Building CXX object CMakeFiles/libgerbera.dir/src/io_handler.cc.o
/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/src/handler/headers.cc: In member function 'const void Headers::writeHeaders(UpnpFileInfo*)':
/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/src/handler/headers.cc:76:5: error: 'UpnpFileInfo_set_ExtraHeaders' was not declared in this scope
     UpnpFileInfo_set_ExtraHeaders(fileInfo, ixmlCloneDOMString(result.c_str()));
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/src/handler/headers.cc:76:5: note: suggested alternative: 'UpnpFileInfo_get_ExtraHeadersList'
     UpnpFileInfo_set_ExtraHeaders(fileInfo, ixmlCloneDOMString(result.c_str()));
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     UpnpFileInfo_get_ExtraHeadersList
[ 22%] Building CXX object CMakeFiles/libgerbera.dir/src/io_handler_chainer.cc.o
make[3]: *** [CMakeFiles/libgerbera.dir/src/handler/headers.cc.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2'
make[2]: *** [CMakeFiles/libgerbera.dir/all] Error 2
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2'
make: *** [/home/buildroot/autobuild/run/instance-0/output-1/build/gerbera-1.3.2/.stamp_built] Error 2
make: Leaving directory `/home/buildroot/autobuild/run/instance-0/buildroot'