Duplicate CLI Function: no_set_metric_val_cmd
	From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: set_ipv6_nexthop_local_cmd
	From cli: "set ipv6 next-hop local X:X::X:X" to New cli: "set ipv6 next-hop local X:X::X:X"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_ipv6_nexthop_local_cmd
	From cli: "no set ipv6 next-hop local" to New cli: "no set ipv6 next-hop local"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_ipv6_nexthop_local_val_cmd
	From cli: "no set ipv6 next-hop local X:X::X:X" to New cli: "no set ipv6 next-hop local X:X::X:X"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: set_tag_cmd
	From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_tag_cmd
	From cli: "no set tag" to New cli: "no set tag"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_tag_val_cmd
	From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: router_zebra_cmd
	From cli: "router zebra" to New cli: "router zebra"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_router_zebra_cmd
	From cli: "no router zebra" to New cli: "no router zebra"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: match_interface_cmd
	From cli: "match interface WORD" to New cli: "match interface WORD"
	Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_interface_cmd
	From cli: "no match interface" to New cli: "no match interface"
	Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_interface_val_cmd
	From cli: "no match interface WORD" to New cli: "no match interface WORD"
	Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: match_ip_next_hop_cmd
	From cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_next_hop_cmd
	From cli: "no match ip next-hop" to New cli: "no match ip next-hop"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_next_hop_val_cmd
	From cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd
	From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd
	From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd
	From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: match_ip_address_cmd
	From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_address_cmd
	From cli: "no match ip address" to New cli: "no match ip address"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_address_val_cmd
	From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: match_ip_address_prefix_list_cmd
	From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_address_prefix_list_cmd
	From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd
	From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/vtysh'
sed \
	-e 's/"vtysh\.h"/"tests.h"/' \
	-e 's/vtysh_init_cmd/test_init_cmd/' \
	-e 's/VTYSH_[A-Z][A-Z_0-9]*/0/g' \
	< ../vtysh/vtysh_cmd.c \
	> test-commands-defun.c
/usr/bin/make  all-am
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[1]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
>>> quagga 1.2.4 Installing to staging directory
PATH="/home/autobuild/autobuild/instance-7/output-1/host/bin:/home/autobuild/autobuild/instance-7/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl"  /usr/bin/make -j1 DESTDIR=/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot install -C /home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/
make[1]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
Making install in lib
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
true
/usr/bin/make  install-am
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libzebra.la '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib'
libtool: install: /usr/bin/install -c .libs/libzebra.so.1.0.0 /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib/libzebra.so.1.0.0
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so.1 || { rm -f libzebra.so.1 && ln -s libzebra.so.1.0.0 libzebra.so.1; }; })
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so || { rm -f libzebra.so && ln -s libzebra.so.1.0.0 libzebra.so; }; })
libtool: install: /usr/bin/install -c .libs/libzebra.lai /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib/libzebra.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/include/quagga'
 /usr/bin/install -c -m 644 buffer.h checksum.h command.h filter.h getopt.h hash.h if.h linklist.h log.h memory.h network.h prefix.h routemap.h distribute.h sockunion.h str.h stream.h table.h thread.h vector.h version.h vty.h zebra.h plist.h zclient.h sockopt.h smux.h md5.h if_rmap.h keychain.h privs.h sigevent.h pqueue.h jhash.h zassert.h memtypes.h workqueue.h route_types.h libospf.h vrf.h '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/include/quagga'
 /usr/bin/install -c -m 644 fifo.h event_counter.h nexthop.h '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/include/quagga'
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
Making install in qpb
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
/usr/bin/make  install-am
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libquagga_pb.la '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib'
libtool: install: /usr/bin/install -c .libs/libquagga_pb.so.0.0.0 /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib/libquagga_pb.so.0.0.0
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so.0 || { rm -f libquagga_pb.so.0 && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so.0; }; })
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so || { rm -f libquagga_pb.so && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so; }; })
libtool: install: /usr/bin/install -c .libs/libquagga_pb.lai /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib/libquagga_pb.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
Making install in fpm
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
/usr/bin/make  install-am
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libfpm_pb.la '/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib'
libtool: install: /usr/bin/install -c .libs/libfpm_pb.so.0.0.0 /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib/libfpm_pb.so.0.0.0
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so.0 || { rm -f libfpm_pb.so.0 && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so.0; }; })
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so || { rm -f libfpm_pb.so && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so; }; })
libtool: install: /usr/bin/install -c .libs/libfpm_pb.lai /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib/libfpm_pb.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
Making install in m4
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/m4'
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/m4'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/m4'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/m4'
Making install in redhat
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/redhat'
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/redhat'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/redhat'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/redhat'
Making install in tests
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
/usr/bin/make  install-am
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[1]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
>>> quagga 1.2.4 Fixing libtool files
for la in $(find /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \
	cp -a "${la}" "${la}.fixed" && \
	/usr/bin/sed -i -e "s:/home/autobuild/autobuild/instance-7/output-1:@BASE_DIR@:g" \
		-e "s:/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \
		 \
		-e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \
		-e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \
		 \
		-e "s:@STAGING_DIR@:/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot:g" \
		-e "s:@BASE_DIR@:/home/autobuild/autobuild/instance-7/output-1:g" \
		"${la}.fixed" && \
	if cmp -s "${la}" "${la}.fixed"; then \
		rm -f "${la}.fixed"; \
	else \
		mv "${la}.fixed" "${la}"; \
	fi || exit 1; \
done
>>> quagga 1.2.4 Installing to target
PATH="/home/autobuild/autobuild/instance-7/output-1/host/bin:/home/autobuild/autobuild/instance-7/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl"  /usr/bin/make -j1 DESTDIR=/home/autobuild/autobuild/instance-7/output-1/target install -C /home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/
make[1]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
Making install in lib
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
true
/usr/bin/make  install-am
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/target/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libzebra.la '/home/autobuild/autobuild/instance-7/output-1/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libzebra.so.1.0.0 /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/libzebra.so.1.0.0
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/target/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so.1 || { rm -f libzebra.so.1 && ln -s libzebra.so.1.0.0 libzebra.so.1; }; })
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/target/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so || { rm -f libzebra.so && ln -s libzebra.so.1.0.0 libzebra.so; }; })
libtool: install: /usr/bin/install -c .libs/libzebra.lai /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/libzebra.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/target/usr/include/quagga'
 /usr/bin/install -c -m 644 buffer.h checksum.h command.h filter.h getopt.h hash.h if.h linklist.h log.h memory.h network.h prefix.h routemap.h distribute.h sockunion.h str.h stream.h table.h thread.h vector.h version.h vty.h zebra.h plist.h zclient.h sockopt.h smux.h md5.h if_rmap.h keychain.h privs.h sigevent.h pqueue.h jhash.h zassert.h memtypes.h workqueue.h route_types.h libospf.h vrf.h '/home/autobuild/autobuild/instance-7/output-1/target/usr/include/quagga'
 /usr/bin/install -c -m 644 fifo.h event_counter.h nexthop.h '/home/autobuild/autobuild/instance-7/output-1/target/usr/include/quagga'
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/lib'
Making install in qpb
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
/usr/bin/make  install-am
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/target/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libquagga_pb.la '/home/autobuild/autobuild/instance-7/output-1/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libquagga_pb.so.0.0.0 /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/libquagga_pb.so.0.0.0
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/target/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so.0 || { rm -f libquagga_pb.so.0 && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so.0; }; })
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/target/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so || { rm -f libquagga_pb.so && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so; }; })
libtool: install: /usr/bin/install -c .libs/libquagga_pb.lai /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/libquagga_pb.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/qpb'
Making install in fpm
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
/usr/bin/make  install-am
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/target/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libfpm_pb.la '/home/autobuild/autobuild/instance-7/output-1/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libfpm_pb.so.0.0.0 /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/libfpm_pb.so.0.0.0
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/target/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so.0 || { rm -f libfpm_pb.so.0 && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so.0; }; })
libtool: install: (cd /home/autobuild/autobuild/instance-7/output-1/target/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so || { rm -f libfpm_pb.so && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so; }; })
libtool: install: /usr/bin/install -c .libs/libfpm_pb.lai /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/libfpm_pb.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/fpm'
Making install in m4
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/m4'
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/m4'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/m4'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/m4'
Making install in redhat
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/redhat'
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/redhat'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/redhat'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/redhat'
Making install in tests
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
/usr/bin/make  install-am
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[4]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4/tests'
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[3]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
make[1]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/quagga-1.2.4'
mkdir -p /home/autobuild/autobuild/instance-7/output-1/target/etc/quagga
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Downloading
wget --passive-ftp -nd -t 3 -O '/home/autobuild/autobuild/instance-7/output-1/build/.raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d.tar.gz.p8B5jH/output' 'https://github.com/RPi-Distro/raspi-gpio/archive/4edfde183ff3ac9ed66cdc015ae25e45f3a5502d/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d.tar.gz' 
--2022-06-08 13:14:00--  https://github.com/RPi-Distro/raspi-gpio/archive/4edfde183ff3ac9ed66cdc015ae25e45f3a5502d/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d.tar.gz
Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt'
Resolving github.com (github.com)... 140.82.113.3
Connecting to github.com (github.com)|140.82.113.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/RPi-Distro/raspi-gpio/tar.gz/4edfde183ff3ac9ed66cdc015ae25e45f3a5502d [following]
--2022-06-08 13:14:01--  https://codeload.github.com/RPi-Distro/raspi-gpio/tar.gz/4edfde183ff3ac9ed66cdc015ae25e45f3a5502d
Resolving codeload.github.com (codeload.github.com)... 140.82.114.10
Connecting to codeload.github.com (codeload.github.com)|140.82.114.10|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: '/home/autobuild/autobuild/instance-7/output-1/build/.raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d.tar.gz.p8B5jH/output'

     0K .......... .......... .......... .......... ..........  454K
    50K .......... .......... .......... .                      123M=0.1s

2022-06-08 13:14:01 (743 KB/s) - '/home/autobuild/autobuild/instance-7/output-1/build/.raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d.tar.gz.p8B5jH/output' saved [83893]

raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d.tar.gz: OK (sha256: 2526dcec1e5a171b13c44b1fb6f2faed5ec849f08021278e2be09bc18264a2fd)
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Extracting
gzip -d -c /home/autobuild/autobuild/instance-7/dl/raspi-gpio/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d.tar.gz | /home/autobuild/autobuild/instance-7/output-1/host/bin/tar --strip-components=1 -C /home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d   -xf -
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Patching
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d -name $file); do cp support/gnuconfig/$file $i; done; done
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Patching libtool
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Configuring
(cd /home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d/ && rm -rf config.cache && PATH="/home/autobuild/autobuild/instance-7/output-1/host/bin:/home/autobuild/autobuild/instance-7/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" AR="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar" AS="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-as" LD="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-ld" NM="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-nm" CC="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc" GCC="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc" CPP="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-cpp" CXX="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-g++" FC="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gfortran" F77="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gfortran" RANLIB="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ranlib" READELF="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/autobuild/autobuild/instance-7/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-7/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-7/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/autobuild/autobuild/instance-7/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-7/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -g0 " LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/autobuild/autobuild/instance-7/output-1/host/bin/pkg-config" STAGING_DIR="/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes   CONFIG_SITE=/dev/null ./configure --target=mips-buildroot-linux-uclibc --host=mips-buildroot-linux-uclibc --build=aarch64-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared   )
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for mips-buildroot-linux-uclibc-strip... /bin/true
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for mips-buildroot-linux-uclibc-gcc... /home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc accepts -g... yes
checking for /home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc option to accept ISO C89... none needed
checking whether /home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of /home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc... none
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Building
PATH="/home/autobuild/autobuild/instance-7/output-1/host/bin:/home/autobuild/autobuild/instance-7/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl"  /usr/bin/make -j1  -C /home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d/
make[1]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d'
/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc -DPACKAGE_NAME=\"raspi-gpio\" -DPACKAGE_TARNAME=\"raspi-gpio\" -DPACKAGE_VERSION=\"0.2\" -DPACKAGE_STRING=\"raspi-gpio\ 0.2\" -DPACKAGE_BUGREPORT=\"serge@raspberrypi.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"raspi-gpio\" -DVERSION=\"0.2\" -I.   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -g0  -c -o raspi-gpio.o raspi-gpio.c
/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -g0    -o raspi-gpio raspi-gpio.o  
make[1]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d'
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Installing to target
PATH="/home/autobuild/autobuild/instance-7/output-1/host/bin:/home/autobuild/autobuild/instance-7/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl"  /usr/bin/make -j1 DESTDIR=/home/autobuild/autobuild/instance-7/output-1/target install -C /home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d/
make[1]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d'
make[2]: Entering directory '/home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d'
 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-7/output-1/target/usr/bin'
  /usr/bin/install -c raspi-gpio '/home/autobuild/autobuild/instance-7/output-1/target/usr/bin'
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d'
make[1]: Leaving directory '/home/autobuild/autobuild/instance-7/output-1/build/raspi-gpio-4edfde183ff3ac9ed66cdc015ae25e45f3a5502d'
>>>   Finalizing host directory
>>>   Finalizing target directory
mkdir -p /home/autobuild/autobuild/instance-7/output-1/host/etc/meson
sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'@PKG_TARGET_CXXFLAGS@%g"         -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc%g" -e "s%@TARGET_CXX@%/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-g++%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%mips%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/autobuild/autobuild/instance-7/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-7/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/autobuild/autobuild/instance-7/output-1/host%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-7/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-7/output-1/host/etc/meson/cross-compilation.conf.in
sed         -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc%g" -e "s%@TARGET_CXX@%/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-g++%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-7/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%mips%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'%g" -e "s%@BR2_CMAKE@%/home/autobuild/autobuild/instance-7/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-7/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/autobuild/autobuild/instance-7/output-1/host%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-7/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-7/output-1/host/etc/meson/cross-compilation.conf
if grep -q CONFIG_ASH=y /home/autobuild/autobuild/instance-7/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/ash$' /home/autobuild/autobuild/instance-7/output-1/target/etc/shells || echo "/bin/ash" >> /home/autobuild/autobuild/instance-7/output-1/target/etc/shells; fi
if grep -q CONFIG_HUSH=y /home/autobuild/autobuild/instance-7/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/hush$' /home/autobuild/autobuild/instance-7/output-1/target/etc/shells || echo "/bin/hush" >> /home/autobuild/autobuild/instance-7/output-1/target/etc/shells; fi
mkdir -p /home/autobuild/autobuild/instance-7/output-1/target/etc
echo "buildroot" > /home/autobuild/autobuild/instance-7/output-1/target/etc/hostname
/usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/autobuild/autobuild/instance-7/output-1/target/etc/hosts
mkdir -p /home/autobuild/autobuild/instance-7/output-1/target/etc
echo "Welcome to Buildroot" > /home/autobuild/autobuild/instance-7/output-1/target/etc/issue
/usr/bin/sed -i -e s,^root:[^:]*:,root::, /home/autobuild/autobuild/instance-7/output-1/target/etc/shadow
grep -qsE '^/bin/sh$' /home/autobuild/autobuild/instance-7/output-1/target/etc/shells || echo "/bin/sh" >> /home/autobuild/autobuild/instance-7/output-1/target/etc/shells
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/usr/include /home/autobuild/autobuild/instance-7/output-1/target/usr/share/aclocal \
	/home/autobuild/autobuild/instance-7/output-1/target/usr/lib/pkgconfig /home/autobuild/autobuild/instance-7/output-1/target/usr/share/pkgconfig \
	/home/autobuild/autobuild/instance-7/output-1/target/usr/lib/cmake /home/autobuild/autobuild/instance-7/output-1/target/usr/share/cmake \
	/home/autobuild/autobuild/instance-7/output-1/target/usr/doc
find /home/autobuild/autobuild/instance-7/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/autobuild/autobuild/instance-7/output-1/target/lib/ /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/ /home/autobuild/autobuild/instance-7/output-1/target/usr/libexec/ \
	\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/usr/share/gdb
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/usr/share/bash-completion
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/etc/bash_completion.d
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/usr/share/zsh
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/usr/man /home/autobuild/autobuild/instance-7/output-1/target/usr/share/man
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/usr/info /home/autobuild/autobuild/instance-7/output-1/target/usr/share/info
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/usr/doc /home/autobuild/autobuild/instance-7/output-1/target/usr/share/doc
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/usr/share/gtk-doc
rmdir /home/autobuild/autobuild/instance-7/output-1/target/usr/share 2>/dev/null || true
rm -rf /home/autobuild/autobuild/instance-7/output-1/target/lib/debug /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/debug
find /home/autobuild/autobuild/instance-7/output-1/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true
find /home/autobuild/autobuild/instance-7/output-1/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true  2>/dev/null || true
test -f /home/autobuild/autobuild/instance-7/output-1/target/etc/ld.so.conf && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/autobuild/autobuild/instance-7/output-1/target/etc/ld.so.conf.d && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/autobuild/autobuild/instance-7/output-1/target/etc
( \
	echo "NAME=Buildroot"; \
	echo "VERSION=2022.05-107-g749ec74cf9"; \
	echo "ID=buildroot"; \
	echo "VERSION_ID=2022.08-git"; \
	echo "PRETTY_NAME=\"Buildroot 2022.08-git\"" \
) >  /home/autobuild/autobuild/instance-7/output-1/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/autobuild/autobuild/instance-7/output-1/target/etc
>>>   Sanitizing RPATH in target tree
PER_PACKAGE_DIR=/home/autobuild/autobuild/instance-7/output-1/per-package /home/autobuild/autobuild/instance-7/buildroot/support/scripts/fix-rpath target
touch /home/autobuild/autobuild/instance-7/output-1/target/usr
ln -snf /home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-uclibc/sysroot /home/autobuild/autobuild/instance-7/output-1/staging
make: Leaving directory '/home/autobuild/autobuild/instance-7/buildroot'
make: Entering directory '/home/autobuild/autobuild/instance-7/buildroot'
>>>   Buildroot 2022.05-107-g749ec74cf9 Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> host-aespipe 2.4f Collecting legal info
>>> host-skeleton  Collecting legal info
>>> host-tar 1.34 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> busybox 1.35.0 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f)
>>> skeleton  Collecting legal info
>>> skeleton-init-none  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> toolchain  Collecting legal info
>>> toolchain-buildroot  Collecting legal info
>>> host-gcc-final 10.3.0 Collecting legal info
>>> host-binutils 2.37 Collecting legal info
COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d)
>>> host-xz 5.2.5 Collecting legal info
COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c)
COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-gmp 6.2.1 Collecting legal info
COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c)
COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-m4 1.4.19 Collecting legal info
COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986)
>>> host-mpc 1.2.1 Collecting legal info
COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768)
>>> host-mpfr 4.1.0 Collecting legal info
COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118)
>>> uclibc 1.0.41 Collecting legal info
COPYING.LIB: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3)
>>> host-gcc-initial 10.3.0 Collecting legal info
>>> linux-headers 5.17.13 Collecting legal info
COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0)
LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79)
LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f)
>>> bzip2 1.0.8 Collecting legal info
LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3)
>>> cache-calibrator  Collecting legal info
calibrator.c.license: OK (sha256: a853663f5b4fb3ad77bf2790ab53146f456b8d9b9ddf83b99fe28c0bdec42514)
>>> cdrkit 1.1.11 Collecting legal info
COPYING: OK (sha256: 90daae00475a992a367da5b0658469a5d1c4449dbbe964c5b7246e1aec92f491)
>>> host-cmake 3.22.3 Collecting legal info
Copyright.txt: OK (sha256: f1a4326266aada65b307dac05161a9d02d3dba4fb08b50cb26e3c24cc8a86e97)
>>> host-pkgconf 1.6.3 Collecting legal info
COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04)
>>> libcap 2.64 Collecting legal info
License: OK (sha256: f58c80bcce8c929db39a23c32e924876e3311f3ffa54f66076c38056d38fa59b)
>>> host-gperf 3.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> zlib  Collecting legal info
>>> libzlib 1.2.12 Collecting legal info
README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd)
>>> host-gnupg 1.4.23 Collecting legal info
COPYING: OK (sha256: fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7)
>>> host-zlib  Collecting legal info
>>> host-libzlib 1.2.12 Collecting legal info
README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd)
>>> ifupdown-scripts  Collecting legal info
>>> libcodec2 1.0.1 Collecting legal info
COPYING: OK (sha256: 9ebb6f82b7380a62ac74c5f0322c88e6744dedf2ebe1f54d6f088282b39844bf)
>>> libmaxminddb 1.6.0 Collecting legal info
LICENSE: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30)
>>> libnfnetlink 1.0.1 Collecting legal info
COPYING: OK (sha256: 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad)
>>> host-autoconf 2.71 Collecting legal info
COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986)
COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350)
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-automake 1.16.5 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> libvncserver 0.9.13 Collecting legal info
COPYING: OK (sha256: 4d23c8c814e5baf007d854f01d8502e77dc56a41144934e003fb32c4e052d20f)
>>> lzo 2.10 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> mdevd 0.1.4.0 Collecting legal info
COPYING: OK (sha256: 31b60c66aba1fa0a7f8847339ac35c28638e25ff96da700d995533ad810e3995)
>>> skalibs 2.10.0.3 Collecting legal info
COPYING: OK (sha256: adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec)
>>> minissdpd 1.5.20211105 Collecting legal info
LICENSE: OK (sha256: 45950e1d443106906f83a4ec7b9c2e1a9d6457130737a493cff0e5b7a39da570)
>>> mpdecimal 2.5.1 Collecting legal info
LICENSE.txt: OK (sha256: b07528d8b1dbf1e2d2741052996f0876e23342ce2d30d0effa39c5457716c25a)
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> quagga 1.2.4 Collecting legal info
COPYING: OK (sha256: b39c1bad4e51e2a3389cd25fc4addebe41a3ae7c11100795683f9330de1536e5)
>>> host-gawk 5.1.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Collecting legal info
LICENSE: OK (sha256: 6e02227e1fb942687163996678d94add7911890c50025912d0ae7ee66d256bb2)
WARNING: the Buildroot source code has not been saved
WARNING: aespipe-2.4f: cannot save license (HOST_AESPIPE_LICENSE_FILES not defined)
WARNING: gcc-final-10.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined)
WARNING: gcc-initial-10.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined)
Legal info produced in /home/autobuild/autobuild/instance-7/output-1/legal-info
make: Leaving directory '/home/autobuild/autobuild/instance-7/buildroot'