checking whether waveshare module is requested... yes
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/target
checking whether input-evdev module is requested... no
checking whether tatung module is requested... no
checking whether ucb1x00 module is requested... no
checking whether mk712 module is requested... no
checking whether h3600 module is requested... no
checking whether dmc module is requested... no
checking whether linear-h2200 module is requested... no
checking whether corgi module is requested... no
checking whether collie module is requested... no
yes
checking for syscall.h... yes
checking whether arctic2 module is requested... no
checking whether dmc_dus3000 module is requested... no
checking whether cy8mrln-palmpre module is requested... no
checking whether galax module is requested... no
checking whether one-wire-ts-input module is requested... no
checking sys/ioctl.h usability... checking where to place modules... ${libdir}/ts
checking whether to enable debugging... no
checking whether to enable tools... yes
yes
checking sys/ioctl.h presence... checking that generated files are newer than configure... done
configure: creating ./config.status
yes
checking for sys/ioctl.h... yes
checking sys/mman.h usability... yes
checking sys/mman.h presence... yes
checking for sys/mman.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... (cd /home/buildroot/autobuild/run/instance-3/output-1/build/oniguruma-6.9.8/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" AR="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc-ar" AS="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-as" LD="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-ld" NM="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc-nm" CC="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc" GCC="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc" CPP="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-cpp" CXX="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-g++" FC="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gfortran" F77="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc-ranlib" READELF="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-readelf" STRIP="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -g0 " LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/or1k-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes   CONFIG_SITE=/dev/null ./configure --target=or1k-buildroot-linux-uclibc --host=or1k-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared   )
yes
checking for sys/param.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for sys/stat.h... (cached) yes
checking sys/time.h usability... configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for sys/wait.h... (cached) yes
checking for a BSD-compatible install... checking sys/ipc.h usability... /usr/bin/install -c
checking whether build environment is sane... yes
checking for or1k-buildroot-linux-uclibc-strip... /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
yes
checking sys/ipc.h presence... checking for or1k-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc
yes
checking for sys/ipc.h... yes
checking sys/sockio.h usability... checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... no
checking sys/sockio.h presence... no
checking for sys/sockio.h... no
checking sys/sysinfo.h usability... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking sys/sysinfo.h presence... yes
checking whether /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc accepts -g... yes
checking for sys/sysinfo.h... yes
checking for sys/wait.h... (cached) yes
yes
checking for /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc option to accept ISO C89... checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking netinet/in_systm.h usability... config.status: creating Makefile
none needed
checking whether /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc understands -c and -o together... config.status: creating etc/Makefile
config.status: creating plugins/Makefile
yes
checking netinet/in_systm.h presence... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc... none
config.status: creating src/Makefile
yes
checking for netinet/in_systm.h... yes
checking build system type... checking netinet/ip.h usability... x86_64-pc-linux-gnu
checking host system type... config.status: creating tests/Makefile
or1k-buildroot-linux-uclibc
checking how to print strings... config.status: creating tools/Makefile
config.status: creating doc/Makefile
>>> open-plc-utils 32408520fcebe785983a68e39ec83830a3005779 Configuring
mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/per-package/open-plc-utils/host
config.status: creating tslib.pc
yes
checking netinet/ip.h presence... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/open-plc-utils/host
printf
config.status: creating config.h
checking for a sed that does not truncate output... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/open-plc-utils/host
/bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... config.status: executing depfiles commands
config.status: executing libtool commands
/bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc... yes
checking for netinet/ip.h... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/open-plc-utils/host
yes
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
checking for main in -lsocket... /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-ld
checking if the linker (/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc-nm
checking the name lister (/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc-nm) interface... no
checking for main in -lmach... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to or1k-buildroot-linux-uclibc format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-ld option to reload object files... -r
checking for or1k-buildroot-linux-uclibc-objdump... /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-objdump
checking how to recognize dependent libraries... pass_all
checking for or1k-buildroot-linux-uclibc-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for or1k-buildroot-linux-uclibc-ar... /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc-ar
checking for archiver @FILE support... no
checking for an ANSI C-conforming const... (cached) yes
checking for off_t... @
checking for or1k-buildroot-linux-uclibc-strip... (cached) /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-strip
checking for or1k-buildroot-linux-uclibc-ranlib... /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc-ranlib
checking command to parse /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc-nm output from /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc object... mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/per-package/open-plc-utils/target
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/open-plc-utils/target
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/open-plc-utils/target
ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/open-plc-utils/target
/bin/dd bs=4096 count=1
yes
checking for size_t... checking for or1k-buildroot-linux-uclibc-mt... no
checking for mt... mt
configure: WARNING: using cross tools not prefixed with host triplet
checking if mt is a manifest tool... no
checking how to run the C preprocessor... /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-cpp
checking for ANSI C header files... >>> opencore-amr 0.1.5 Configuring
mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host
yes
checking for socklen_t equivalent... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host
yes
checking for sys/types.h... yes
size_t
checking for h_errno declaration in netdb.h... checking for sys/stat.h... yes
checking for struct sockaddr_storage... yes
checking for stdlib.h... yes
checking whether time.h and sys/time.h may both be included... mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/target
yes
yes
checking for stdbool.h that conforms to C99... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/target
checking for string.h... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/target
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/target
yes
checking for _Bool... yes
checking for memory.h... yes
yes
checking if sockaddr struct has sa_len member... >>> optee-client 3.18.0 Configuring
checking for strings.h... mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-cmake/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-cmake/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host
no
checking for pid_t... yes
checking for inttypes.h... yes
checking for stdint.h... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pkgconf/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pkgconf/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host
yes
checking vfork.h usability... (cd /home/buildroot/autobuild/run/instance-3/output-1/build/opencore-amr-0.1.5/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" AR="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc-ar" AS="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-as" LD="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld" NM="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc-nm" CC="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc" GCC="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc" CPP="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-cpp" CXX="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++" FC="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gfortran" F77="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc-ranlib" READELF="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-readelf" STRIP="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -g0 " LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/or1k-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes   CONFIG_SITE=/dev/null ./configure --target=or1k-buildroot-linux-uclibc --host=or1k-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared   )
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host
yes
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host
checking for unistd.h... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host
no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for dlfcn.h... yes
checking for vfork... configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
yes
yes
checking for objdir... checking for working fork... cross
configure: WARNING: result yes guessed because of cross compilation
.libs
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/target
checking for sys/param.h... (cached) yes
checking for getpagesize... checking for a BSD-compatible install... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-cmake/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-cmake/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/target
/usr/bin/install -c
checking whether build environment is sane... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pkgconf/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pkgconf/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/target
yes
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/target
checking for or1k-buildroot-linux-uclibc-strip... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for working mmap... (cached) yes
yes
checking sys/select.h usability... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/target
checking whether make supports nested variables... yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc supports -fno-rtti -fno-exceptions... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/target
checking whether UID '1000' is supported by ustar format... yes
checking whether GID '1000' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking whether make supports nested variables... (cached) yes
checking whether to enable maintainer-specific portions of Makefiles... no
no
checking for /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc option to produce PIC... -fPIC -DPIC
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc PIC flag -fPIC -DPIC works... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc static flag -static works... checking for sys/socket.h... (cached) yes
checking types of arguments for select... yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc supports -c -o file.o... int,fd_set *,struct timeval *
checking whether the C++ compiler works... checking whether setpgrp takes no argument... (cached) set
checking return type of signal handlers... yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc supports -c -o file.o... (cached) yes
checking whether the /home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-gcc linker (/home/buildroot/autobuild/run/instance-3/output-1/per-package/oniguruma/host/bin/or1k-linux-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... void
checking for alarm... no
checking dynamic linker characteristics... yes
yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... checking for bzero... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether make sets $(MAKE)... yes
(cached) yes
checking sys/time.h usability... checking for daemon... 
checking whether we are cross compiling... yes
checking for suffix of object files... yes
yes
checking sys/time.h presence... o
checking whether we are using the GNU C++ compiler... checking for gethostbyname... (mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/build/optee-client-3.18.0/ && cd /home/buildroot/autobuild/run/instance-3/output-1/build/optee-client-3.18.0/ && rm -f CMakeCache.txt && PATH="/home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"  /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host/bin/cmake /home/buildroot/autobuild/run/instance-3/output-1/build/optee-client-3.18.0/ -G"Unix Makefiles" -DCMAKE_TOOLCHAIN_FILE="/home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_INSTALL_RUNSTATEDIR="/run" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON  -DCFG_TEE_FS_PARENT_PATH="/data/tee" -DCFG_WERROR=OFF -DRPMB_EMU=OFF -DCFG_TEE_SUPP_PLUGINS=OFF )
yes
checking for sys/time.h... yes
yes
checking whether /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ accepts -g... checking for unistd.h... (cached) yes
yes
checking sys/times.h usability... yes
checking for style of include used by make... checking for gethrtime... GNU
checking dependency style of /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++... none
checking for or1k-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc
-- The C compiler identification is GNU 10.3.0
yes
checking sys/times.h presence... no
checking whether we are using the GNU C compiler... checking for gettimeofday... -- Detecting C compiler ABI info
yes
checking for sys/times.h... yes
checking size of int... yes
checking whether /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc accepts -g... yes
yes
checking for /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc option to accept ISO C89... checking for inet_ntoa... none needed
checking whether /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc understands -c and -o together... yes
checking for memset... -- Detecting C compiler ABI info - done
yes
checking dependency style of /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc... none
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
-- Check for working C compiler: /home/buildroot/autobuild/run/instance-3/output-1/per-package/optee-client/host/bin/or1k-linux-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
yes
-- Looking for pthread.h
checking build system type... checking for memcpy... x86_64-pc-linux-gnu
checking host system type... or1k-buildroot-linux-uclibc
checking how to print strings... yes
checking for munmap... printf
checking for a sed that does not truncate output... -- Looking for pthread.h - found
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
/bin/sed
yes
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for select... checking for ld used by /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld
checking if the linker (/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc-nm
checking the name lister (/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc-nm) interface... yes
checking for setsid... BSD nm
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to or1k-buildroot-linux-uclibc format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld option to reload object files... -r
checking for or1k-buildroot-linux-uclibc-objdump... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-objdump
checking how to recognize dependent libraries... pass_all
checking for or1k-buildroot-linux-uclibc-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for or1k-buildroot-linux-uclibc-ar... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc-ar
checking for archiver @FILE support... -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE  
yes
checking for socket... @
-- Configuring done
checking for or1k-buildroot-linux-uclibc-strip... (cached) /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-strip
checking for or1k-buildroot-linux-uclibc-ranlib... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc-ranlib
checking command to parse /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc-nm output from /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc object... -- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_DOC
    BUILD_DOCS
    BUILD_EXAMPLE
    BUILD_EXAMPLES
    BUILD_TEST
    BUILD_TESTING
    BUILD_TESTS


-- Build files have been written to: /home/buildroot/autobuild/run/instance-3/output-1/build/optee-client-3.18.0
yes
checking for sqrt... 4
checking size of long... ok
checking for sysroot... no
checking for a working dd... yes
/bin/dd
checking how to truncate binary pipes... checking for strcasecmp... /bin/dd bs=4096 count=1
checking for or1k-buildroot-linux-uclibc-mt... no
checking for mt... mt
configure: WARNING: using cross tools not prefixed with host triplet
checking if mt is a manifest tool... no
checking how to run the C preprocessor... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-cpp
yes
checking for strchr... checking for ANSI C header files... yes
checking for strstr... >>> host-pahole 1.24 Building
PATH="/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pahole/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pahole/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" PKG_CONFIG="/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pahole/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pahole/host/lib/pkgconfig:/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pahole/host/share/pkgconfig"  /usr/bin/make   -C /home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24/
yes
make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24'
checking for sys/types.h... yes
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24'
checking for strtoul... make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24'
[  2%] Building C object CMakeFiles/dwarves.dir/dwarves.c.o
yes
checking for sys/stat.h... yes
checking for uname... yes
yes
checking for stdlib.h... checking for toupper... yes
yes
checking for string.h... checking for getnameinfo... 4
checking size of long long... yes
yes
checking for getaddrinfo... checking for memory.h... yes
yes
checking for inet_ntop... checking for strings.h... yes
yes
checking for getifaddrs... checking for inttypes.h... yes
yes
checking for stdint.h... checking for sendfile... [  5%] Building C object CMakeFiles/dwarves.dir/dwarves_fprintf.c.o
yes
yes
checking for uname... (cached) yes
checking for unistd.h... checking for mpctl... no
checking for processor_bind... yes
checking for dlfcn.h... no
checking for sched_setaffinity... yes
checking for objdir... .libs
yes
checking for bind_to_cpu_id... checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc supports -fno-rtti -fno-exceptions... no
checking for bindprocessor... no
checking for /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc option to produce PIC... -fPIC -DPIC
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc PIC flag -fPIC -DPIC works... no
checking whether to include histogram support... no
checking whether to include dirty support... no
checking whether to include demo support... yes
yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc static flag -static works... checking whether to include Unix-domain socket tests... no
checking whether to include DLPI tests... no
checking whether to include DCCP tests... no
checking whether to include OMNI tests... yes
checking whether to include XTI tests... no
checking whether to include SDP tests... no
checking whether to include ICSC-EXS tests... no
checking whether to include SCTP tests... no
checking whether to include paced send (intervals) support... no
checking whether paced sends should spin... no
checking whether to include initial burst support in _RR tests... yes
checking which CPU utilization measurement type to use... "procstat - auto"
[  8%] Building C object CMakeFiles/dwarves.dir/gobuffer.c.o
8
checking size of void*... yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc supports -c -o file.o... configure: creating ./config.status
yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc supports -c -o file.o... (cached) yes
checking whether the /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-gcc linker (/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... [ 10%] Building C object CMakeFiles/dwarves.dir/ctf_loader.c.o
no
checking dynamic linker characteristics... config.status: creating Makefile
config.status: creating src/netperf_version.h
GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... config.status: creating src/Makefile
config.status: creating src/missing/Makefile
config.status: creating src/missing/m4/Makefile
/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ -E
[ 13%] Building C object CMakeFiles/dwarves.dir/libctf.c.o
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating netperf.spec
config.status: creating config.h
config.status: executing depfiles commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared
[ 16%] Building C object CMakeFiles/dwarves.dir/btf_encoder.c.o
checking for ld used by /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++... /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld
checking if the linker (/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld) is GNU ld... yes
4
checking for size_t... checking whether the /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ linker (/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld) supports shared libraries... yes
In file included from /home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24/btf_encoder.c:19:0:
/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-pahole/host/include/bpf/libbpf.h:70:54: error: 'enum bpf_link_type' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
 LIBBPF_API const char *libbpf_bpf_link_type_str(enum bpf_link_type t);
                                                      ^~~~~~~~~~~~~
>>> parprouted 0.7 Configuring
mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/per-package/parprouted/host
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/parprouted/host
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/parprouted/host
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/host/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/parprouted/host
yes
checking for working alloca.h... checking for /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ option to produce PIC... -fPIC -DPIC
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ PIC flag -fPIC -DPIC works... yes
checking for alloca... yes
yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ static flag -static works... cc1: all warnings being treated as errors
CMakeFiles/dwarves.dir/build.make:145: recipe for target 'CMakeFiles/dwarves.dir/btf_encoder.c.o' failed
make[3]: *** [CMakeFiles/dwarves.dir/btf_encoder.c.o] Error 1
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24'
CMakeFiles/Makefile2:106: recipe for target 'CMakeFiles/dwarves.dir/all' failed
make[2]: *** [CMakeFiles/dwarves.dir/all] Error 2
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24'
Makefile:135: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24'
package/pkg-generic.mk:290: recipe for target '/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24/.stamp_built' failed
make: *** [/home/buildroot/autobuild/run/instance-3/output-1/build/host-pahole-1.24/.stamp_built] Error 2
make: *** Waiting for unfinished jobs....
mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/per-package/parprouted/target
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/host-skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/parprouted/target
checking that generated files are newer than configure... done
configure: creating ./config.status
yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ supports -c -o file.o... rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/skeleton/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/parprouted/target
rsync -a --link-dest=/home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/toolchain/target/ /home/buildroot/autobuild/run/instance-3/output-1/per-package/parprouted/target
yes
checking if /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ supports -c -o file.o... (cached) yes
checking whether the /home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-g++ linker (/home/buildroot/autobuild/run/instance-3/output-1/per-package/opencore-amr/host/bin/or1k-linux-ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lm... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for inline... inline
checking for int16_t... yes
checking for int32_t... yes
checking for int64_t... yes
checking for int8_t... config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
yes
checking for uint16_t... config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating amrnb/Makefile
config.status: creating amrwb/Makefile
config.status: creating test/Makefile
config.status: creating amrnb/opencore-amrnb.pc
config.status: creating amrwb/opencore-amrwb.pc
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
   Compiling git2 v0.15.0
    Finished release [optimized] target(s) in 12m 37s
make: Leaving directory '/home/buildroot/autobuild/run/instance-3/buildroot'