Libraries have been installed in:
   /home/br-user/autobuild/run/instance-2/output/host/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/lib'
make[2]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/lib'
Making install in src
make[2]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/src'
make[3]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/src'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/br-user/autobuild/run/instance-2/output/host/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/br-user/autobuild/run/instance-2/output/host/bin'
libtool: install: /usr/bin/install -c sg_bg_ctl /home/br-user/autobuild/run/instance-2/output/host/bin/sg_bg_ctl
libtool: install: /usr/bin/install -c sg_compare_and_write /home/br-user/autobuild/run/instance-2/output/host/bin/sg_compare_and_write
libtool: install: /usr/bin/install -c sg_decode_sense /home/br-user/autobuild/run/instance-2/output/host/bin/sg_decode_sense
libtool: install: /usr/bin/install -c sg_format /home/br-user/autobuild/run/instance-2/output/host/bin/sg_format
libtool: install: /usr/bin/install -c sg_get_config /home/br-user/autobuild/run/instance-2/output/host/bin/sg_get_config
libtool: install: /usr/bin/install -c sg_get_lba_status /home/br-user/autobuild/run/instance-2/output/host/bin/sg_get_lba_status
libtool: install: /usr/bin/install -c sg_ident /home/br-user/autobuild/run/instance-2/output/host/bin/sg_ident
libtool: install: /usr/bin/install -c sg_inq /home/br-user/autobuild/run/instance-2/output/host/bin/sg_inq
libtool: install: /usr/bin/install -c sg_logs /home/br-user/autobuild/run/instance-2/output/host/bin/sg_logs
libtool: install: /usr/bin/install -c sg_luns /home/br-user/autobuild/run/instance-2/output/host/bin/sg_luns
libtool: install: /usr/bin/install -c sg_modes /home/br-user/autobuild/run/instance-2/output/host/bin/sg_modes
libtool: install: /usr/bin/install -c sg_opcodes /home/br-user/autobuild/run/instance-2/output/host/bin/sg_opcodes
libtool: install: /usr/bin/install -c sg_persist /home/br-user/autobuild/run/instance-2/output/host/bin/sg_persist
libtool: install: /usr/bin/install -c sg_prevent /home/br-user/autobuild/run/instance-2/output/host/bin/sg_prevent
libtool: install: /usr/bin/install -c sg_raw /home/br-user/autobuild/run/instance-2/output/host/bin/sg_raw
libtool: install: /usr/bin/install -c sg_rdac /home/br-user/autobuild/run/instance-2/output/host/bin/sg_rdac
libtool: install: /usr/bin/install -c sg_read_attr /home/br-user/autobuild/run/instance-2/output/host/bin/sg_read_attr
libtool: install: /usr/bin/install -c sg_read_block_limits /home/br-user/autobuild/run/instance-2/output/host/bin/sg_read_block_limits
libtool: install: /usr/bin/install -c sg_read_buffer /home/br-user/autobuild/run/instance-2/output/host/bin/sg_read_buffer
libtool: install: /usr/bin/install -c sg_read_long /home/br-user/autobuild/run/instance-2/output/host/bin/sg_read_long
libtool: install: /usr/bin/install -c sg_readcap /home/br-user/autobuild/run/instance-2/output/host/bin/sg_readcap
libtool: install: /usr/bin/install -c sg_reassign /home/br-user/autobuild/run/instance-2/output/host/bin/sg_reassign
libtool: install: /usr/bin/install -c sg_referrals /home/br-user/autobuild/run/instance-2/output/host/bin/sg_referrals
libtool: install: /usr/bin/install -c sg_rep_zones /home/br-user/autobuild/run/instance-2/output/host/bin/sg_rep_zones
libtool: install: /usr/bin/install -c sg_requests /home/br-user/autobuild/run/instance-2/output/host/bin/sg_requests
libtool: install: /usr/bin/install -c sg_reset_wp /home/br-user/autobuild/run/instance-2/output/host/bin/sg_reset_wp
libtool: install: /usr/bin/install -c sg_rmsn /home/br-user/autobuild/run/instance-2/output/host/bin/sg_rmsn
libtool: install: /usr/bin/install -c sg_rtpg /home/br-user/autobuild/run/instance-2/output/host/bin/sg_rtpg
libtool: install: /usr/bin/install -c sg_safte /home/br-user/autobuild/run/instance-2/output/host/bin/sg_safte
libtool: install: /usr/bin/install -c sg_sanitize /home/br-user/autobuild/run/instance-2/output/host/bin/sg_sanitize
libtool: install: /usr/bin/install -c sg_sat_identify /home/br-user/autobuild/run/instance-2/output/host/bin/sg_sat_identify
libtool: install: /usr/bin/install -c sg_sat_phy_event /home/br-user/autobuild/run/instance-2/output/host/bin/sg_sat_phy_event
libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/br-user/autobuild/run/instance-2/output/host/bin/sg_sat_read_gplog
libtool: install: /usr/bin/install -c sg_sat_set_features /home/br-user/autobuild/run/instance-2/output/host/bin/sg_sat_set_features
libtool: install: /usr/bin/install -c sg_seek /home/br-user/autobuild/run/instance-2/output/host/bin/sg_seek
libtool: install: /usr/bin/install -c sg_senddiag /home/br-user/autobuild/run/instance-2/output/host/bin/sg_senddiag
libtool: install: /usr/bin/install -c sg_ses /home/br-user/autobuild/run/instance-2/output/host/bin/sg_ses
libtool: install: /usr/bin/install -c sg_ses_microcode /home/br-user/autobuild/run/instance-2/output/host/bin/sg_ses_microcode
libtool: install: /usr/bin/install -c sg_start /home/br-user/autobuild/run/instance-2/output/host/bin/sg_start
libtool: install: /usr/bin/install -c sg_stpg /home/br-user/autobuild/run/instance-2/output/host/bin/sg_stpg
libtool: install: /usr/bin/install -c sg_stream_ctl /home/br-user/autobuild/run/instance-2/output/host/bin/sg_stream_ctl
libtool: install: /usr/bin/install -c sg_sync /home/br-user/autobuild/run/instance-2/output/host/bin/sg_sync
libtool: install: /usr/bin/install -c sg_timestamp /home/br-user/autobuild/run/instance-2/output/host/bin/sg_timestamp
libtool: install: /usr/bin/install -c sg_turs /home/br-user/autobuild/run/instance-2/output/host/bin/sg_turs
libtool: install: /usr/bin/install -c sg_unmap /home/br-user/autobuild/run/instance-2/output/host/bin/sg_unmap
libtool: install: /usr/bin/install -c sg_verify /home/br-user/autobuild/run/instance-2/output/host/bin/sg_verify
libtool: install: /usr/bin/install -c sg_vpd /home/br-user/autobuild/run/instance-2/output/host/bin/sg_vpd
libtool: install: /usr/bin/install -c sg_wr_mode /home/br-user/autobuild/run/instance-2/output/host/bin/sg_wr_mode
libtool: install: /usr/bin/install -c sg_write_buffer /home/br-user/autobuild/run/instance-2/output/host/bin/sg_write_buffer
libtool: install: /usr/bin/install -c sg_write_long /home/br-user/autobuild/run/instance-2/output/host/bin/sg_write_long
libtool: install: /usr/bin/install -c sg_write_same /home/br-user/autobuild/run/instance-2/output/host/bin/sg_write_same
libtool: install: /usr/bin/install -c sg_write_verify /home/br-user/autobuild/run/instance-2/output/host/bin/sg_write_verify
libtool: install: /usr/bin/install -c sg_write_x /home/br-user/autobuild/run/instance-2/output/host/bin/sg_write_x
libtool: install: /usr/bin/install -c sg_zone /home/br-user/autobuild/run/instance-2/output/host/bin/sg_zone
libtool: install: /usr/bin/install -c sg_copy_results /home/br-user/autobuild/run/instance-2/output/host/bin/sg_copy_results
libtool: install: /usr/bin/install -c sg_dd /home/br-user/autobuild/run/instance-2/output/host/bin/sg_dd
libtool: install: /usr/bin/install -c sg_emc_trespass /home/br-user/autobuild/run/instance-2/output/host/bin/sg_emc_trespass
libtool: install: /usr/bin/install -c sg_map /home/br-user/autobuild/run/instance-2/output/host/bin/sg_map
libtool: install: /usr/bin/install -c sg_map26 /home/br-user/autobuild/run/instance-2/output/host/bin/sg_map26
libtool: install: /usr/bin/install -c sg_rbuf /home/br-user/autobuild/run/instance-2/output/host/bin/sg_rbuf
libtool: install: /usr/bin/install -c sg_read /home/br-user/autobuild/run/instance-2/output/host/bin/sg_read
libtool: install: /usr/bin/install -c sg_reset /home/br-user/autobuild/run/instance-2/output/host/bin/sg_reset
libtool: install: /usr/bin/install -c sg_scan /home/br-user/autobuild/run/instance-2/output/host/bin/sg_scan
libtool: install: /usr/bin/install -c sg_test_rwbuf /home/br-user/autobuild/run/instance-2/output/host/bin/sg_test_rwbuf
libtool: install: /usr/bin/install -c sg_xcopy /home/br-user/autobuild/run/instance-2/output/host/bin/sg_xcopy
libtool: install: /usr/bin/install -c sginfo /home/br-user/autobuild/run/instance-2/output/host/bin/sginfo
libtool: install: /usr/bin/install -c sgm_dd /home/br-user/autobuild/run/instance-2/output/host/bin/sgm_dd
libtool: install: /usr/bin/install -c sgp_dd /home/br-user/autobuild/run/instance-2/output/host/bin/sgp_dd
make[3]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/src'
make[2]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/src'
Making install in doc
make[2]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/doc'
make[3]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/doc'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/br-user/autobuild/run/instance-2/output/host/share/man/man8'
 /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 '/home/br-user/autobuild/run/instance-2/output/host/share/man/man8'
 /usr/bin/install -c -m 644 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/br-user/autobuild/run/instance-2/output/host/share/man/man8'
make[3]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/doc'
make[2]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/doc'
Making install in scripts
make[2]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/scripts'
make[3]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/scripts'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/br-user/autobuild/run/instance-2/output/host/bin'
 /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/br-user/autobuild/run/instance-2/output/host/bin'
make[3]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/scripts'
make[2]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44/scripts'
make[2]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44'
make[3]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44'
make[2]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44'
make[1]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-sg3_utils-1.44'
utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz: OK (sha256: 8b5ba0058a78de69faf6822bb10b457fff2f9e55dc112ccb81c35214b061c6e6)
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Extracting
gzip -d -c /home/br-user/autobuild/run/instance-2/dl/utp_com/utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz | tar --strip-components=1 -C /home/br-user/autobuild/run/instance-2/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6   -xf -
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Patching
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Configuring
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Building
PATH="/home/br-user/autobuild/run/instance-2/output/host/bin:/home/br-user/autobuild/run/instance-2/output/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games" PKG_CONFIG="/home/br-user/autobuild/run/instance-2/output/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/br-user/autobuild/run/instance-2/output/host/lib/pkgconfig:/home/br-user/autobuild/run/instance-2/output/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/br-user/autobuild/run/instance-2/output/host/include" CFLAGS="-O2 -I/home/br-user/autobuild/run/instance-2/output/host/include" CXXFLAGS="-O2 -I/home/br-user/autobuild/run/instance-2/output/host/include" LDFLAGS="-L/home/br-user/autobuild/run/instance-2/output/host/lib -Wl,-rpath,/home/br-user/autobuild/run/instance-2/output/host/lib" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j8 -C /home/br-user/autobuild/run/instance-2/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6
make[1]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6'
/usr/bin/gcc -c -o utp_com.o utp_com.c -O2 -I/home/br-user/autobuild/run/instance-2/output/host/include
/usr/bin/gcc -o utp_com utp_com.o -L/home/br-user/autobuild/run/instance-2/output/host/lib -Wl,-rpath,/home/br-user/autobuild/run/instance-2/output/host/lib
make[1]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6'
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Installing to host directory
/usr/bin/install -D -m 755 /home/br-user/autobuild/run/instance-2/output/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6/utp_com /home/br-user/autobuild/run/instance-2/output/host/bin/utp_com
>>> wipe 2.3.1 Downloading
--2019-11-19 03:21:58--  http://downloads.sourceforge.net/project/wipe/wipe/2.3.1/wipe-2.3.1.tar.bz2
Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 216.105.38.13
Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|216.105.38.13|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://netix.dl.sourceforge.net/project/wipe/wipe/2.3.1/wipe-2.3.1.tar.bz2 [following]
--2019-11-19 03:21:58--  https://netix.dl.sourceforge.net/project/wipe/wipe/2.3.1/wipe-2.3.1.tar.bz2
Resolving netix.dl.sourceforge.net (netix.dl.sourceforge.net)... 87.121.121.2
Connecting to netix.dl.sourceforge.net (netix.dl.sourceforge.net)|87.121.121.2|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 72297 (71K) [application/octet-stream]
Saving to: '/home/br-user/autobuild/run/instance-2/output/build/.wipe-2.3.1.tar.bz2.15pGPf/output'

     0K .......... .......... .......... .......... .......... 70%  625K 0s
    50K .......... ..........                                 100%  133M=0.08s

2019-11-19 03:21:58 (881 KB/s) - '/home/br-user/autobuild/run/instance-2/output/build/.wipe-2.3.1.tar.bz2.15pGPf/output' saved [72297/72297]

wipe-2.3.1.tar.bz2: OK (sha256: 463916370f9b35bb34419c2c0ae3dc4c0a471db32e8595afa1d14c0337b61aa0)
>>> wipe 2.3.1 Extracting
bzcat /home/br-user/autobuild/run/instance-2/dl/wipe/wipe-2.3.1.tar.bz2 | tar --strip-components=1 -C /home/br-user/autobuild/run/instance-2/output/build/wipe-2.3.1   -xf -
>>> wipe 2.3.1 Patching

Applying 0001-musl.patch using patch: 
patching file rand.h
>>> wipe 2.3.1 Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /home/br-user/autobuild/run/instance-2/output/build/wipe-2.3.1 -name $file); do cp support/gnuconfig/$file $i; done; done
>>> wipe 2.3.1 Patching libtool
>>> wipe 2.3.1 Configuring
(cd /home/br-user/autobuild/run/instance-2/output/build/wipe-2.3.1/ && rm -rf config.cache && PATH="/home/br-user/autobuild/run/instance-2/output/host/bin:/home/br-user/autobuild/run/instance-2/output/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games" AR="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-ar" AS="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-as" LD="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-ld" NM="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-nm" CC="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc" GCC="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc" CPP="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-cpp" CXX="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-g++" FC="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gfortran" F77="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gfortran" RANLIB="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-ranlib" READELF="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-readelf" STRIP="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-strip" OBJCOPY="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-objcopy" OBJDUMP="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/br-user/autobuild/run/instance-2/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/br-user/autobuild/run/instance-2/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/br-user/autobuild/run/instance-2/output/host/include" LDFLAGS_FOR_BUILD="-L/home/br-user/autobuild/run/instance-2/output/host/lib -Wl,-rpath,/home/br-user/autobuild/run/instance-2/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-as" DEFAULT_LINKER="/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/br-user/autobuild/run/instance-2/output/host/bin/pkg-config" STAGING_DIR="/home/br-user/autobuild/run/instance-2/output/host/riscv32-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no   CONFIG_SITE=/dev/null ./configure --target=riscv32-buildroot-linux-gnu --host=riscv32-buildroot-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared   )
loading site script /dev/null
creating cache ./config.cache
checking host system type... riscv32-buildroot-linux-gnu
checking target system type... riscv32-buildroot-linux-gnu
checking build system type... x86_64-pc-linux-gnu
checking for gcc... /home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc
checking whether the C compiler (/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os   ) works... yes
checking whether the C compiler (/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os   ) is a cross-compiler... yes
checking whether we are using GNU C... yes
checking whether /home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc accepts -g... yes
checking for POSIXized ISC... no
checking how to run the C preprocessor... /home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-cpp
checking whether /home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc needs -traditional... no
checking for a BSD compatible install... /usr/bin/install -c
checking whether the C compiler accepts -pipe... yes
checking whether the C compiler accepts -g... yes
checking whether the C compiler accepts -O0... yes
checking whether the C compiler accepts -O2... yes
checking whether the C compiler accepts -ansi... yes
checking whether the C compiler accepts -pedantic... yes
checking whether the C compiler accepts -Wall... yes
checking whether the C compiler accepts -Werror... yes
checking for dirent.h that defines DIR... yes
checking for opendir in -ldir... no
checking for ANSI C header files... yes
checking for unistd.h... yes
checking for stdint.h... yes
checking for fcntl.h... yes
checking for memory.h... yes
checking for linux/fs.h... yes
checking for sys/mount.h... yes
checking for sys/disklabel.h... no
checking for sys/ioctl.h... yes
checking for sys/file.h... yes
checking for sys/stat.h... yes
checking for sys/time.h... yes
checking for sys/types.h... yes
checking for getopt.h... yes
checking for errno.h... yes
checking for termio.h... yes
checking for termios.h... yes
checking for linux/mtio.h... yes
checking for working const... yes
checking for inline... __inline__
checking for off_t... yes
checking for size_t... yes
checking whether stat file-mode macros are broken... no
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... (cached) yes
checking for getopt... yes
checking for strnlen... yes
checking for bzero... yes
checking for memset... yes
checking for memcpy... yes
checking for realloc... yes
checking for fchmod... yes
checking for ioctl... yes
checking for fcntl... yes
checking for lockf... yes
checking for flock... yes
checking for fsync... yes
checking for fdatasync... yes
checking for unlink... yes
checking for rmdir... yes
checking for remove... yes
checking for rename... yes
checking for dirfd... yes
updating cache ./config.cache
creating ./config.status
creating Makefile
creating config.h
>>> wipe 2.3.1 Building
PATH="/home/br-user/autobuild/run/instance-2/output/host/bin:/home/br-user/autobuild/run/instance-2/output/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"  /usr/bin/make -j8  -C /home/br-user/autobuild/run/instance-2/output/build/wipe-2.3.1/
make[1]: Entering directory '/home/br-user/autobuild/run/instance-2/output/build/wipe-2.3.1'
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o main.o main.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o wipe.o wipe.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o rand.o rand.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o dir.o dir.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o file.o file.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o blkdev.o blkdev.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o lock.o lock.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o text.o text.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o str.o str.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o percent.o percent.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o prompt.o prompt.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o io.o io.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc -pipe -O2   -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX    -c -o mt.o mt.c
/home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-gcc  *.o -o wipe
make[1]: Leaving directory '/home/br-user/autobuild/run/instance-2/output/build/wipe-2.3.1'
>>> wipe 2.3.1 Installing to target
/usr/bin/install -D -m 0755 /home/br-user/autobuild/run/instance-2/output/build/wipe-2.3.1/wipe /home/br-user/autobuild/run/instance-2/output/target/usr/bin/wipe
>>>   Finalizing target directory
# Check files that are touched by more than one package
/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L  console 0 vt100 #~' /home/br-user/autobuild/run/instance-2/output/target/etc/inittab
/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/br-user/autobuild/run/instance-2/output/target/etc/inittab
if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/br-user/autobuild/run/instance-2/output/target/etc/shells || echo "/bin/ash" >> /home/br-user/autobuild/run/instance-2/output/target/etc/shells; fi
grep: ./.config: No such file or directory
if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/br-user/autobuild/run/instance-2/output/target/etc/shells || echo "/bin/hush" >> /home/br-user/autobuild/run/instance-2/output/target/etc/shells; fi
grep: ./.config: No such file or directory
rm -f /home/br-user/autobuild/run/instance-2/output/target/usr/share/glib-2.0/schemas/*.xml /home/br-user/autobuild/run/instance-2/output/target/usr/share/glib-2.0/schemas/*.dtd
/home/br-user/autobuild/run/instance-2/output/host/bin/glib-compile-schemas /home/br-user/autobuild/run/instance-2/output/host/riscv32-buildroot-linux-gnu/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/br-user/autobuild/run/instance-2/output/target/usr/share/glib-2.0/schemas
No schema files found: doing nothing.
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/share/lua/5.3/doc
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/lib/luarocks
mkdir -p /home/br-user/autobuild/run/instance-2/output/target/etc
echo "buildroot" > /home/br-user/autobuild/run/instance-2/output/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/br-user/autobuild/run/instance-2/output/target/etc/hosts
mkdir -p /home/br-user/autobuild/run/instance-2/output/target/etc
echo "Welcome to Buildroot" > /home/br-user/autobuild/run/instance-2/output/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/br-user/autobuild/run/instance-2/output/target/etc/shadow
rm -f /home/br-user/autobuild/run/instance-2/output/target/bin/sh
rm -f /home/br-user/autobuild/run/instance-2/output/build/locales.nopurge
for i in C en_US locale-archive; do echo $i >> /home/br-user/autobuild/run/instance-2/output/build/locales.nopurge; done
for dir in /home/br-user/autobuild/run/instance-2/output/target/usr/share/locale; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/br-user/autobuild/run/instance-2/output/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/br-user/autobuild/run/instance-2/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/br-user/autobuild/run/instance-2/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/br-user/autobuild/run/instance-2/output/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/include /home/br-user/autobuild/run/instance-2/output/target/usr/share/aclocal \
	/home/br-user/autobuild/run/instance-2/output/target/usr/lib/pkgconfig /home/br-user/autobuild/run/instance-2/output/target/usr/share/pkgconfig \
	/home/br-user/autobuild/run/instance-2/output/target/usr/lib/cmake /home/br-user/autobuild/run/instance-2/output/target/usr/share/cmake
find /home/br-user/autobuild/run/instance-2/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/br-user/autobuild/run/instance-2/output/target/lib/ /home/br-user/autobuild/run/instance-2/output/target/usr/lib/ /home/br-user/autobuild/run/instance-2/output/target/usr/libexec/ \
	\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
find: '/home/br-user/autobuild/run/instance-2/output/target/usr/libexec/': No such file or directory
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/share/gdb
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/share/bash-completion
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/share/zsh
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/man /home/br-user/autobuild/run/instance-2/output/target/usr/share/man
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/info /home/br-user/autobuild/run/instance-2/output/target/usr/share/info
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/doc /home/br-user/autobuild/run/instance-2/output/target/usr/share/doc
rm -rf /home/br-user/autobuild/run/instance-2/output/target/usr/share/gtk-doc
rmdir /home/br-user/autobuild/run/instance-2/output/target/usr/share 2>/dev/null || true
find /home/br-user/autobuild/run/instance-2/output/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/br-user/autobuild/run/instance-2/output/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/br-user/autobuild/run/instance-2/output/host/bin/riscv32-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true
test -f /home/br-user/autobuild/run/instance-2/output/target/etc/ld.so.conf && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/br-user/autobuild/run/instance-2/output/target/etc/ld.so.conf.d && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/br-user/autobuild/run/instance-2/output/target/etc
( \
	echo "NAME=Buildroot"; \
	echo "VERSION=2019.11-rc2-00009-g502d55fc2d"; \
	echo "ID=buildroot"; \
	echo "VERSION_ID=2019.11-rc2"; \
	echo "PRETTY_NAME=\"Buildroot 2019.11-rc2\"" \
) >  /home/br-user/autobuild/run/instance-2/output/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/br-user/autobuild/run/instance-2/output/target/etc
>>>   Sanitizing RPATH in target tree
/home/br-user/autobuild/run/instance-2/buildroot/support/scripts/fix-rpath target
touch /home/br-user/autobuild/run/instance-2/output/target/usr
make: Leaving directory '/home/br-user/autobuild/run/instance-2/buildroot'
make: Entering directory '/home/br-user/autobuild/run/instance-2/buildroot'
>>>   Buildroot 2019.11-rc2-00009-g502d55fc2d Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-external  Collecting legal info
>>> host-skeleton  Collecting legal info
>>> skeleton  Collecting legal info
>>> skeleton-init-sysv  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> toolchain-external-custom  Collecting legal info
>>> toolchain  Collecting legal info
>>> boost 1.71.0 Collecting legal info
LICENSE_1_0.txt: OK (sha256: c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566)
>>> bullet 2.88 Collecting legal info
LICENSE.txt: OK (sha256: 885cd516a8420acb7c3e0b1a7119913b686495001ae564e3229740460e8cff59)
>>> host-pkgconf 1.6.1 Collecting legal info
COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04)
>>> busybox 1.31.1 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
>>> util-linux 2.34 Collecting legal info
README.licensing: OK (sha256: 4335620e8f478ee4dc4d26540448d39469091ef1d8e3fbbbb8bf753206ceac74)
Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-autoconf 2.69 Collecting legal info
COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2)
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> ncurses 6.1 Collecting legal info
COPYING: OK (sha256: 86106f0da1cf5ccfa0f0651665dd1b4515e8edad1c7972780155770548b317d9)
>>> host-ncurses 6.1 Collecting legal info
COPYING: OK (sha256: 86106f0da1cf5ccfa0f0651665dd1b4515e8edad1c7972780155770548b317d9)
>>> zlib  Collecting legal info
>>> libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> cannelloni 20160414 Collecting legal info
ERROR: No hash found for gpl-2.0.txt
>>> ctorrent dnh3.3.2 Collecting legal info
ERROR: No hash found for COPYING
>>> openssl  Collecting legal info
>>> libopenssl 1.1.1d Collecting legal info
LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c)
>>> domoticz 0f411f781ae4fb4a82f592d38a3f40578c149533 Collecting legal info
License.txt: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> libcurl 7.66.0 Collecting legal info
COPYING: OK (sha256: 8c8824f50e73a021f5dde1fccbf69685939247399a33a32abab1fa448c9ddabb)
>>> libidn2 2.2.0 Collecting legal info
COPYING: OK (sha256: 73483f797a83373fca1b968c11785b98c4fc4803cdc7d3210811ca8b075d6d76)
COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
COPYING.LESSERv3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768)
COPYING.unicode: OK (sha256: 01d621eef165cf4d3d3dbb737aa0699178d94c6f18cf87e9dde6db3ca7790f46)
>>> lua 5.3.5 Collecting legal info
ERROR: No hash found for doc/readme.html
>>> mosquitto 1.6.7 Collecting legal info
LICENSE.txt: OK (sha256: cc77e25bafd40637b7084f04086d606f0a200051b61806f97c93405926670bc1)
epl-v10: OK (sha256: 3b9be6b894d0769de796e653571ff6cef494913c0ce78c35a97db939e7d9087c)
edl-v10: OK (sha256: e8cf7d54ea46c19aba793983889b7f7425e1ebfcaaccec764a7db091646e203c)
>>> sqlite 3300000 Collecting legal info
tea/license.terms: OK (sha256: 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9)
>>> elfutils 0.177 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING-GPLV2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
COPYING-LGPLV3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768)
>>> expat 2.2.9 Collecting legal info
COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76)
>>> faifa 0.1 Collecting legal info
ERROR: No hash found for COPYING
>>> libpcap 1.9.1 Collecting legal info
LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd)
>>> host-bison 3.4.2 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-flex 2.6.4 Collecting legal info
COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273)
>>> host-gettext  Collecting legal info
>>> host-gettext-tiny 73fc3e7ef7e016a3874b632fd0475969d288f309 Collecting legal info
LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34)
extra/COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> fontconfig 2.13.1 Collecting legal info
COPYING: OK (sha256: fa4cd9ab005185e10cd8f7504518856c7dd36c01e766c2bac87f4fc638e9f886)
>>> freetype 2.10.1 Collecting legal info
docs/LICENSE.TXT: OK (sha256: fd056de4196903a676208ef58cfddafc7d583d1f28fa2e44c309cf84a59e62fb)
docs/FTL.TXT: OK (sha256: 08c135755dd589039470f1fdbb400daaabaaa50d0b366d19cebff4d22986baa1)
docs/GPLv2.TXT: OK (sha256: c4120c6752c910c299e3bd9cb3a46ff262c268303ca2069b61f92f10a5656c18)
>>> host-gperf 3.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> getent  Collecting legal info
>>> gmp 6.1.2 Collecting legal info
COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c)
COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> gsl 2.5 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> gssdp 1.0.3 Collecting legal info
COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5)
>>> host-meson 0.52.0 Collecting legal info
COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30)
>>> host-ninja 1.9.0 Collecting legal info
COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea)
>>> host-python3 3.8.0 Collecting legal info
LICENSE: OK (sha256: a77d71d6be6f9032e6b6e5d2cf6da68f9eeab9036edfbc043633c8979cd5e82c)
>>> host-expat 2.2.9 Collecting legal info
COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76)
>>> host-libffi 3.3-rc0 Collecting legal info
LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5)
>>> host-zlib  Collecting legal info
>>> host-libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> host-python3-setuptools 41.4.0 Collecting legal info
LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a)
>>> libglib2 2.62.0 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-libglib2 2.62.0 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-pcre 8.43 Collecting legal info
LICENCE: OK (sha256: a5fce68baf797e0918463a4437ef75984c41118f43850ddeabda1b5a90154309)
>>> host-util-linux 2.34 Collecting legal info
README.licensing: OK (sha256: 4335620e8f478ee4dc4d26540448d39469091ef1d8e3fbbbb8bf753206ceac74)
Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> libffi 3.3-rc0 Collecting legal info
LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5)
>>> pcre 8.43 Collecting legal info
LICENCE: OK (sha256: a5fce68baf797e0918463a4437ef75984c41118f43850ddeabda1b5a90154309)
>>> libsoup 2.62.3 Collecting legal info
COPYING: OK (sha256: b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c)
>>> host-intltool 0.51.0 Collecting legal info
COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670)
>>> host-libxml-parser-perl 2.44 Collecting legal info
README: OK (sha256: a008c782e078102720266824c1e87875bafbf25ffae4b173dc135f9a4e1c672e)
>>> libxml2 2.9.10 Collecting legal info
COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd)
>>> initscripts  Collecting legal info
>>> jo 1.2 Collecting legal info
COPYING: OK (sha256: 41d8b23dc6e76731f4920b9ce42d0d4a248d243a510319e2441d174a115f35cf)
>>> kompexsqlite 1.10.12-1 Collecting legal info
LICENSE.txt: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768)
>>> liblo 0.30 Collecting legal info
COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a)
>>> liblog4c-localtime 1.0 Collecting legal info
COPYING: OK (sha256: a190dc9c8043755d90f8b0a75fa66b9e42d4af4c980bf5ddc633f0124db3cee7)
>>> libmhash 0.9.9.9 Collecting legal info
COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5)
>>> libnpth 1.6 Collecting legal info
COPYING.LIB: OK (sha256: ce64d5f7b49ea6d80fdb6d4cdee6839d1a94274f7493dc797c3b55b65ec8e9ed)
>>> libtorrent 0.13.8 Collecting legal info
COPYING: OK (sha256: 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994)
>>> lua-datafile 0.6-1 Collecting legal info
datafile/LICENSE: OK (sha256: 0443ddabab14f69d4c5e2641860343784a0ccbe5ae7a3743f20de9a13991da66)
>>> host-luarocks 3.2.1 Collecting legal info
COPYING: OK (sha256: 542ad0ee9b8ba582437ca7b4d0959c9b9432f25d2067f144d017188a7a84dd2f)
>>> host-luainterpreter  Collecting legal info
>>> host-lua 5.3.5 Collecting legal info
ERROR: No hash found for doc/readme.html
>>> luainterpreter  Collecting legal info
>>> lua-lunitx 0.8-1 Collecting legal info
lunit/LICENSE: OK (sha256: 3fcfcd6010d73bc2b22505b6a91779022a82661809a3e4e0a0bdd7b3463def8f)
>>> monkey 1.6.9 Collecting legal info
LICENSE: OK (sha256: 0d542e0c8804e39aa7f37eb00da5a762149dc682d7829451287e11b938e94594)
>>> mpfr 4.0.2 Collecting legal info
COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118)
>>> mtdev 1.1.5 Collecting legal info
COPYING: OK (sha256: 795bfe74daae59a97d3a0c8ec0ba0f08c243adf94a3aa7981a4136fce31d55b4)
>>> mtdev2tuio e1e7378d86abe751158e743586133022f32fa4d1 Collecting legal info
ERROR: No hash found for COPYING
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> urg 0.8.18 Collecting legal info
COPYING: OK (sha256: 9ccf26cfe845e0eb8bb58053e47366e7ab6b697ae010f7650978d4b71b7d1fc1)
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Collecting legal info
LICENSE: OK (sha256: a45d0bb572ed792ed34627a72621834b3ba92aab6e2cc4e04301dee7a728d753)
>>> host-sg3_utils 1.44 Collecting legal info
COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc)
BSD_LICENSE: OK (sha256: 31f6d59679e0fb21c9358f22484e6e3c53e20ef08c0950fd38a4a867cb55edc9)
>>> wipe 2.3.1 Collecting legal info
ERROR: No hash found for LICENSE
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined)
Legal info produced in /home/br-user/autobuild/run/instance-2/output/legal-info
make: Leaving directory '/home/br-user/autobuild/run/instance-2/buildroot'