This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by configure, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --target=sparc-buildroot-linux-uclibc --host=sparc-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --enable-nls --disable-static --enable-shared --without-javac --with-termcap --with-ssl --with-odbc --disable-builtin-zlib CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 --disable-option-checking --cache-file=/dev/null --srcdir=/tmp/instance-2/output-1/build/erlang-22.2/lib/megaco ## --------- ## ## Platform. ## ## --------- ## hostname = a3 uname -m = x86_64 uname -r = 5.4.0-80-generic uname -s = Linux uname -v = #90-Ubuntu SMP Fri Jul 9 22:49:44 UTC 2021 /usr/bin/uname -p = x86_64 /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /tmp/instance-2/output-1/host/bin PATH: /tmp/instance-2/output-1/host/sbin PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /snap/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2383: checking build system type configure:2397: result: x86_64-pc-linux-gnu configure:2417: checking host system type configure:2430: result: sparc-buildroot-linux-uclibc configure:2463: checking for sparc-buildroot-linux-uclibc-gcc configure:2490: result: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc configure:2759: checking for C compiler version configure:2768: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc --version >&5 sparc-linux-gcc.br_real (Buildroot 2020.08-14-ge5a2a90) 9.3.0 Copyright (C) 2019 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:2779: $? = 0 configure:2768: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -v >&5 Using built-in specs. COLLECT_GCC=/tmp/instance-2/output-1/host/opt/ext-toolchain/bin/sparc-linux-gcc.br_real COLLECT_LTO_WRAPPER=/tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../libexec/gcc/sparc-buildroot-linux-uclibc/9.3.0/lto-wrapper Target: sparc-buildroot-linux-uclibc Configured with: ./configure --prefix=/opt/sparcv8--uclibc--stable-2020.08-1 --sysconfdir=/opt/sparcv8--uclibc--stable-2020.08-1/etc --enable-static --target=sparc-buildroot-linux-uclibc --with-sysroot=/opt/sparcv8--uclibc--stable-2020.08-1/sparc-buildroot-linux-uclibc/sysroot --enable-__cxa_atexit --with-gnu-ld --disable-libssp --disable-multilib --disable-decimal-float --with-gmp=/opt/sparcv8--uclibc--stable-2020.08-1 --with-mpc=/opt/sparcv8--uclibc--stable-2020.08-1 --with-mpfr=/opt/sparcv8--uclibc--stable-2020.08-1 --with-pkgversion='Buildroot 2020.08-14-ge5a2a90' --with-bugurl=http://bugs.buildroot.net/ --without-zstd --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-libsanitizer --disable-libsanitizer --enable-tls --enable-threads --without-isl --without-cloog --with-cpu=v8 --enable-languages=c,c++,fortran --with-build-time-tools=/opt/sparcv8--uclibc--stable-2020.08-1/sparc-buildroot-linux-uclibc/bin --enable-shared --disable-libgomp Thread model: posix gcc version 9.3.0 (Buildroot 2020.08-14-ge5a2a90) COMPILER_PATH=/tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../libexec/gcc/sparc-buildroot-linux-uclibc/9.3.0/:/tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../libexec/gcc/:/tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ LIBRARY_PATH=/tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/:/tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/:/tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/lib/:/tmp/instance-2/output-1/host/sparc-buildroot-linux-uclibc/sysroot/lib/:/tmp/instance-2/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/ COLLECT_GCC_OPTIONS='-mcpu=v8' '-fPIE' '-pie' '-v' ... rest of stderr output deleted ... configure:2779: $? = 1 configure:2768: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -V >&5 sparc-linux-gcc.br_real: error: unrecognized command line option '-V' configure:2779: $? = 1 configure:2768: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -qversion >&5 sparc-linux-gcc.br_real: error: unrecognized command line option '-qversion'; did you mean '--version'? configure:2779: $? = 1 configure:2799: checking whether the C compiler works configure:2821: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:2825: $? = 0 configure:2873: result: yes configure:2876: checking for C compiler default output file name configure:2878: result: a.out configure:2884: checking for suffix of executables configure:2891: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:2895: $? = 0 configure:2917: result: configure:2939: checking whether we are cross compiling configure:2977: result: yes configure:2982: checking for suffix of object files configure:3004: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3008: $? = 0 configure:3029: result: o configure:3033: checking whether we are using the GNU C compiler configure:3052: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3052: $? = 0 configure:3061: result: yes configure:3070: checking whether /tmp/instance-2/output-1/host/bin/sparc-linux-gcc accepts -g configure:3090: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3090: $? = 0 configure:3131: result: yes configure:3148: checking for /tmp/instance-2/output-1/host/bin/sparc-linux-gcc option to accept ISO C89 configure:3211: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3211: $? = 0 configure:3224: result: none needed configure:3252: checking for mixed cygwin or msys and native VC++ environment configure:3275: result: no configure:3291: checking for mixed cygwin and native MinGW environment configure:3307: result: no configure:3316: checking if we mix cygwin with any native compiler configure:3322: result: no configure:3328: checking if we mix msys with another native compiler configure:3334: result: no configure:3365: checking for flex configure:3381: found /tmp/instance-2/output-1/host/bin/flex configure:3392: result: flex configure:3430: flex conftest.l configure:3434: $? = 0 configure:3436: checking lex output file root configure:3450: result: lex.yy configure:3455: checking lex library configure:3469: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 /tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /tmp/ccEfEtGp.o: in function `yylex': conftest.c:(.text+0xef0): undefined reference to `yywrap' /tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: conftest.c:(.text+0x12b4): undefined reference to `yywrap' /tmp/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /tmp/ccEfEtGp.o: in function `main': conftest.c:(.text.startup+0xc): undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:3469: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:3469: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lfl >&5 configure:3469: $? = 0 configure:3479: result: -lfl configure:3485: checking whether yytext is a pointer configure:3502: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lfl >&5 configure:3502: $? = 0 configure:3510: result: yes configure:3467: checking for reentrant capable flex configure:3469: flex -R -Pconftest -oconftest.c conftest.flex 1>&5 configure:3472: $? = 0 configure:3476: result: yes configure:3527: checking if we can add -Werror=return-type to CFLAGS (via CFLAGS) configure:3542: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3542: $? = 0 configure:3550: result: yes configure:3581: checking how to run the C preprocessor configure:3651: result: /tmp/instance-2/output-1/host/bin/sparc-linux-cpp configure:3671: /tmp/instance-2/output-1/host/bin/sparc-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:3671: $? = 0 configure:3685: /tmp/instance-2/output-1/host/bin/sparc-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:10:10: fatal error: ac_nonexistent.h: No such file or directory 10 | #include | ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:3685: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define YYTEXT_POINTER 1 | /* end confdefs.h. */ | #include configure:3714: checking for grep that handles long lines and -e configure:3772: result: /usr/bin/grep configure:3777: checking for egrep configure:3839: result: /usr/bin/grep -E configure:3844: checking for ANSI C header files configure:3864: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3864: $? = 0 configure:3948: result: yes configure:3961: checking for sys/types.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3961: checking for sys/stat.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3961: checking for stdlib.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3961: checking for string.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3961: checking for memory.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3961: checking for strings.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3961: checking for inttypes.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3961: checking for stdint.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3961: checking for unistd.h configure:3961: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:3961: $? = 0 configure:3961: result: yes configure:3982: checking for native win32 threads configure:3992: result: no configure:4000: checking for pthread_create in -lpthread configure:4025: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -o conftest -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lpthread >&5 configure:4025: $? = 0 configure:4034: result: yes configure:4180: checking for sparc-buildroot-linux-uclibc-getconf configure:4208: result: false configure:4222: checking for sparc-buildroot-linux-uclibc-getconf configure:4256: result: no configure:4266: checking for getconf configure:4300: result: no configure:4322: checking for Native POSIX Thread Library configure:4339: result: cross configure:4343: WARNING: result yes guessed because of cross compilation configure:4349: checking nptl/pthread.h usability configure:4349: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:53:10: fatal error: nptl/pthread.h: No such file or directory 53 | #include | ^~~~~~~~~~~~~~~~ compilation terminated. configure:4349: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define YYTEXT_POINTER 1 | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:4349: result: no configure:4349: checking nptl/pthread.h presence configure:4349: /tmp/instance-2/output-1/host/bin/sparc-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:20:10: fatal error: nptl/pthread.h: No such file or directory 20 | #include | ^~~~~~~~~~~~~~~~ compilation terminated. configure:4349: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define YYTEXT_POINTER 1 | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | /* end confdefs.h. */ | #include configure:4349: result: no configure:4349: checking for nptl/pthread.h configure:4349: result: no configure:4402: checking pthread.h usability configure:4402: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS conftest.c >&5 configure:4402: $? = 0 configure:4402: result: yes configure:4402: checking pthread.h presence configure:4402: /tmp/instance-2/output-1/host/bin/sparc-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS conftest.c configure:4402: $? = 0 configure:4402: result: yes configure:4402: checking for pthread.h configure:4402: result: yes configure:4411: checking pthread/mit/pthread.h usability configure:4411: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS conftest.c >&5 conftest.c:54:10: fatal error: pthread/mit/pthread.h: No such file or directory 54 | #include | ^~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. configure:4411: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define YYTEXT_POINTER 1 | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_PTHREAD_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:4411: result: no configure:4411: checking pthread/mit/pthread.h presence configure:4411: /tmp/instance-2/output-1/host/bin/sparc-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS conftest.c conftest.c:21:10: fatal error: pthread/mit/pthread.h: No such file or directory 21 | #include | ^~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. configure:4411: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define YYTEXT_POINTER 1 | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_PTHREAD_H 1 | /* end confdefs.h. */ | #include configure:4411: result: no configure:4411: checking for pthread/mit/pthread.h configure:4411: result: no configure:4455: checking if we can add -Wdeclaration-after-statement to DED_WARN_FLAGS (via CFLAGS) configure:4470: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Wdeclaration-after-statement -Wall -Wstrict-prototypes -Wmissing-prototypes -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:23:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] 23 | main () | ^~~~ configure:4470: $? = 0 configure:4478: result: yes configure:4488: checking if we can add -Werror=return-type to DED_WERRORFLAGS (via CFLAGS) configure:4503: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4503: $? = 0 configure:4511: result: yes configure:4520: checking if we can add -Werror=implicit to DED_WERRORFLAGS (via CFLAGS) configure:4535: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=implicit -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4535: $? = 0 configure:4543: result: yes configure:4552: checking if we can add -Werror=undef to DED_WERRORFLAGS (via CFLAGS) configure:4567: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc -c -Werror=undef -Werror=implicit -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4567: $? = 0 configure:4575: result: yes configure:4759: checking for sparc-buildroot-linux-uclibc-ld configure:4786: result: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc configure:4850: checking for static compiler flags configure:4853: result: -Werror=undef -Werror=implicit -Werror=return-type -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSTATIC_ERLANG_NIF -DSTATIC_ERLANG_DRIVER configure:4855: checking for basic compiler flags for loadable drivers configure:4858: result: -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -fPIC configure:4860: checking for compiler flags for loadable drivers configure:4863: result: -Werror=undef -Werror=implicit -Werror=return-type -Wdeclaration-after-statement -Wall -Wstrict-prototypes -Wmissing-prototypes -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -fPIC configure:4865: checking for linker for loadable drivers configure:4867: result: /tmp/instance-2/output-1/host/bin/sparc-linux-gcc configure:4869: checking for linker flags for loadable drivers configure:4871: result: -shared -Wl,-Bsymbolic configure:4873: checking for 'runtime library path' linker flag configure:4876: result: -Wl,-R configure:4904: checking for perl configure:4932: result: /usr/bin/perl configure:5088: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by config.status, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on a3 config.status:770: creating examples/meas/Makefile configure:6237: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by config.status, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on a3 config.status:771: creating examples/meas/Makefile config.status:771: creating src/flex/sparc-buildroot-linux-uclibc/Makefile ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-pc-linux-gnu ac_cv_c_bigendian=yes ac_cv_c_compiler_gnu=yes ac_cv_env_CC_set=set ac_cv_env_CC_value=/tmp/instance-2/output-1/host/bin/sparc-linux-gcc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 ' ac_cv_env_CPPFLAGS_set=set ac_cv_env_CPPFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' ac_cv_env_CPP_set=set ac_cv_env_CPP_value=/tmp/instance-2/output-1/host/bin/sparc-linux-cpp ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=x86_64-pc-linux-gnu ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=sparc-buildroot-linux-uclibc ac_cv_env_target_alias_set=set ac_cv_env_target_alias_value=sparc-buildroot-linux-uclibc ac_cv_func_calloc_0_nonnull=yes ac_cv_func_isinf=yes ac_cv_func_isnan=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_memcmp_working=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_realloc_0_nonnull=yes ac_cv_have_decl_malloc=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_nptl_pthread_h=no ac_cv_header_pthread_h=yes ac_cv_header_pthread_mit_pthread_h=no ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=sparc-buildroot-linux-uclibc ac_cv_lbl_unaligned_fail=yes ac_cv_lib_lex=-lfl ac_cv_lib_pthread_pthread_create=yes ac_cv_objext=o ac_cv_path_EGREP='/usr/bin/grep -E' ac_cv_path_GREP=/usr/bin/grep ac_cv_prog_CC=/tmp/instance-2/output-1/host/bin/sparc-linux-gcc ac_cv_prog_CPP=/tmp/instance-2/output-1/host/bin/sparc-linux-cpp ac_cv_prog_DED_LD=/tmp/instance-2/output-1/host/bin/sparc-linux-gcc ac_cv_prog_GETCONF=false ac_cv_prog_LEX=flex ac_cv_prog_PERL=/usr/bin/perl ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=yes gl_cv_func_malloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec= ## ----------------- ## ## Output variables. ## ## ----------------- ## CC='/tmp/instance-2/output-1/host/bin/sparc-linux-gcc' CFLAGS='-Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 ' CPP='/tmp/instance-2/output-1/host/bin/sparc-linux-cpp' CPPFLAGS='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' DED_BASIC_CFLAGS='-Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -fPIC' DED_CC='/tmp/instance-2/output-1/host/bin/sparc-linux-gcc' DED_CFLAGS='-Werror=undef -Werror=implicit -Werror=return-type -Wdeclaration-after-statement -Wall -Wstrict-prototypes -Wmissing-prototypes -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -fPIC' DED_EXT='so' DED_GCC='yes' DED_INCLUDE='-I/tmp/instance-2/output-1/build/erlang-22.2/erts/emulator/beam -I/tmp/instance-2/output-1/build/erlang-22.2/erts/include -I/tmp/instance-2/output-1/build/erlang-22.2/erts/include/sparc-buildroot-linux-uclibc -I/tmp/instance-2/output-1/build/erlang-22.2/erts/include/internal -I/tmp/instance-2/output-1/build/erlang-22.2/erts/include/internal/sparc-buildroot-linux-uclibc -I/tmp/instance-2/output-1/build/erlang-22.2/erts/emulator/sys/unix -I/tmp/instance-2/output-1/build/erlang-22.2/erts/emulator/sys/common' DED_LD='/tmp/instance-2/output-1/host/bin/sparc-linux-gcc' DED_LDFLAGS='-shared -Wl,-Bsymbolic' DED_LD_FLAG_RUNTIME_LIBRARY_PATH='-Wl,-R' DED_LIBS='' DED_OSTYPE='unix' DED_STATIC_CFLAGS='-Werror=undef -Werror=implicit -Werror=return-type -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS -Werror=return-type -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSTATIC_ERLANG_NIF -DSTATIC_ERLANG_DRIVER' DED_SYS_INCLUDE='-I/tmp/instance-2/output-1/build/erlang-22.2/erts/emulator/beam -I/tmp/instance-2/output-1/build/erlang-22.2/erts/include -I/tmp/instance-2/output-1/build/erlang-22.2/erts/include/sparc-buildroot-linux-uclibc -I/tmp/instance-2/output-1/build/erlang-22.2/erts/include/internal -I/tmp/instance-2/output-1/build/erlang-22.2/erts/include/internal/sparc-buildroot-linux-uclibc -I/tmp/instance-2/output-1/build/erlang-22.2/erts/emulator/sys/unix -I/tmp/instance-2/output-1/build/erlang-22.2/erts/emulator/sys/common' DED_THR_DEFS=' -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS' DED_WARN_FLAGS='-Wdeclaration-after-statement -Wall -Wstrict-prototypes -Wmissing-prototypes' DED_WERRORFLAGS='-Werror=undef -Werror=implicit -Werror=return-type ' DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_PTHREAD_H=1' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/usr/bin/grep -E' ENABLE_MEGACO_FLEX_SCANNER='true' ENABLE_MEGACO_FLEX_SCANNER_LINENO='true' ENABLE_REENTRANT_MEGACO_FLEX_SCANNER='true' ERLANG_OSTYPE='unix' EXEEXT='' GETCONF='false' GREP='/usr/bin/grep' LDFLAGS='' LEX='flex' LEXLIB='-lfl' LEX_OUTPUT_ROOT='lex.yy' LIBOBJS='' LIBS='' LTLIBOBJS='' MIXED_CYGWIN='no' MIXED_CYGWIN_MINGW='no' MIXED_CYGWIN_VC='no' MIXED_MSYS='no' MIXED_MSYS_VC='no' MIXED_VC='no' OBJEXT='o' OTP_EXTRA_FLAGS='-DOTP_RELEASE' PACKAGE_BUGREPORT='' PACKAGE_NAME='' PACKAGE_STRING='' PACKAGE_TARNAME='' PACKAGE_URL='' PACKAGE_VERSION='' PATH_SEPARATOR=':' PERL='/usr/bin/perl' SHELL='/bin/bash' ac_ct_CC='' bindir='${exec_prefix}/bin' build='x86_64-pc-linux-gnu' build_alias='x86_64-pc-linux-gnu' build_cpu='x86_64' build_os='linux-gnu' build_vendor='pc' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE}' dvidir='${docdir}' exec_prefix='/usr' host='sparc-buildroot-linux-uclibc' host_alias='sparc-buildroot-linux-uclibc' host_cpu='sparc' host_os='linux-uclibc' host_vendor='buildroot' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/var' mandir='${datarootdir}/man' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/usr' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='/etc' target_alias='sparc-buildroot-linux-uclibc' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "" #define PACKAGE_TARNAME "" #define PACKAGE_VERSION "" #define PACKAGE_STRING "" #define PACKAGE_BUGREPORT "" #define PACKAGE_URL "" #define YYTEXT_POINTER 1 #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_PTHREAD_H 1 configure: exit 0