This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by Heimdal configure 7.99.1, which was generated by GNU Autoconf 2.72. Invocation command line was $ ./configure --prefix=/home/buildroot/autobuild/run/instance-0/output-1/host --sysconfdir=/home/buildroot/autobuild/run/instance-0/output-1/host/etc --localstatedir=/home/buildroot/autobuild/run/instance-0/output-1/host/var --enable-shared --disable-static --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --disable-debug --with-xmlto=no --with-fop=no --disable-nls --disable-dependency-tracking --disable-shared --enable-static --without-openldap --without-capng --with-db-type-preference= --without-sqlite3 --without-libintl --without-openssl --without-berkeley-db --without-readline --without-libedit --without-hesiod --without-x --disable-mdb-db --disable-ndbm-db --disable-heimdal-documentation ## --------- ## ## Platform. ## ## --------- ## hostname = ns304657.ip-46-105-103.eu uname -m = x86_64 uname -r = 4.4.0-210-generic uname -s = Linux uname -v = #242-Ubuntu SMP Fri Apr 16 09:57:56 UTC 2021 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/ PATH: /home/buildroot/autobuild/run/instance-0/output-1/host/sbin/ PATH: /usr/local/sbin/ PATH: /usr/local/bin/ PATH: /usr/sbin/ PATH: /usr/bin/ PATH: /sbin/ PATH: /bin/ PATH: /usr/games/ PATH: /usr/local/games/ PATH: /snap/bin/ ## ----------- ## ## Core tests. ## ## ----------- ## configure:3213: looking for aux files: compile config.guess config.sub ltmain.sh missing install-sh configure:3226: trying ./ configure:3255: ./compile found configure:3255: ./config.guess found configure:3255: ./config.sub found configure:3255: ./ltmain.sh found configure:3255: ./missing found configure:3237: ./install-sh found configure:3390: checking for a BSD-compatible install configure:3464: result: /usr/bin/install -c configure:3475: checking whether build environment is sane configure:3530: result: yes configure:3691: checking for a race-free mkdir -p configure:3734: result: /bin/mkdir -p configure:3741: checking for gawk configure:3777: result: no configure:3741: checking for mawk configure:3762: found /usr/bin/mawk configure:3774: result: mawk configure:3785: checking whether make sets $(MAKE) configure:3809: result: yes configure:3839: checking whether make supports nested variables configure:3858: result: yes configure:3995: checking whether to enable maintainer-specific portions of Makefiles configure:4006: result: no configure:4053: checking build system type configure:4069: result: x86_64-pc-linux-gnu configure:4089: checking host system type configure:4104: result: x86_64-pc-linux-gnu configure:4145: checking how to print strings configure:4172: result: printf configure:4206: checking whether make supports the include directive configure:4221: make -f confmf.GNU && cat confinc.out make[1]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17' make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17' this is the am__doit target configure:4224: $? = 0 configure:4243: result: yes (GNU style) configure:4320: checking for gcc configure:4353: result: /usr/bin/gcc configure:4712: checking for C compiler version configure:4721: /usr/bin/gcc --version >&5 gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 Copyright (C) 2017 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4732: $? = 0 configure:4721: /usr/bin/gcc -v >&5 Using built-in specs. COLLECT_GCC=/usr/bin/gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/7/lto-wrapper OFFLOAD_TARGET_NAMES=nvptx-none OFFLOAD_TARGET_DEFAULT=1 Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 7.5.0-3ubuntu1~18.04' --with-bugurl=file:///usr/share/doc/gcc-7/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --prefix=/usr --with-gcc-major-version-only --program-suffix=-7 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib --enable-objc-gc=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) configure:4732: $? = 0 configure:4721: /usr/bin/gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:4732: $? = 1 configure:4721: /usr/bin/gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? gcc: fatal error: no input files compilation terminated. configure:4732: $? = 1 configure:4721: /usr/bin/gcc -version >&5 gcc: error: unrecognized command line option '-version' gcc: fatal error: no input files compilation terminated. configure:4732: $? = 1 configure:4752: checking whether the C compiler works configure:4774: /usr/bin/gcc -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c >&5 configure:4778: $? = 0 configure:4829: result: yes configure:4833: checking for C compiler default output file name configure:4835: result: a.out configure:4841: checking for suffix of executables configure:4848: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c >&5 configure:4852: $? = 0 configure:4876: result: configure:4900: checking whether we are cross compiling configure:4908: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c >&5 configure:4912: $? = 0 configure:4919: ./conftest configure:4923: $? = 0 configure:4938: result: no configure:4944: checking for suffix of object files configure:4967: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:4971: $? = 0 configure:4995: result: o configure:4999: checking whether the compiler supports GNU C configure:5019: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:5019: $? = 0 configure:5031: result: yes configure:5042: checking whether /usr/bin/gcc accepts -g configure:5063: /usr/bin/gcc -c -g -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:5063: $? = 0 configure:5110: result: yes configure:5130: checking for /usr/bin/gcc option to enable C11 features configure:5145: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:5145: $? = 0 configure:5164: result: none needed configure:5288: checking whether /usr/bin/gcc understands -c and -o together configure:5311: /usr/bin/gcc -c conftest.c -o conftest2.o configure:5314: $? = 0 configure:5311: /usr/bin/gcc -c conftest.c -o conftest2.o configure:5314: $? = 0 configure:5327: result: yes configure:5346: checking dependency style of /usr/bin/gcc configure:5459: result: none configure:5474: checking for a sed that does not truncate output configure:5546: result: /bin/sed configure:5564: checking for grep that handles long lines and -e configure:5630: result: /bin/grep configure:5635: checking for egrep configure:5705: result: /bin/grep -E configure:5712: checking for fgrep configure:5782: result: /bin/grep -F configure:5819: checking for ld used by /usr/bin/gcc configure:5888: result: /usr/bin/ld configure:5895: checking if the linker (/usr/bin/ld) is GNU ld configure:5912: result: yes configure:5924: checking for BSD- or MS-compatible name lister (nm) configure:5980: result: /usr/bin/nm configure:6122: checking the name lister (/usr/bin/nm) interface configure:6130: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:6133: /usr/bin/nm "conftest.o" configure:6136: output 0000000000000000 B some_variable configure:6144: result: BSD nm configure:6147: checking whether ln -s works configure:6151: result: yes configure:6159: checking the maximum length of command line arguments configure:6292: result: 1572864 configure:6340: checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format configure:6382: result: func_convert_file_noop configure:6389: checking how to convert x86_64-pc-linux-gnu file names to toolchain format configure:6411: result: func_convert_file_noop configure:6418: checking for /usr/bin/ld option to reload object files configure:6427: result: -r configure:6507: checking for objdump configure:6528: found /usr/bin/objdump configure:6540: result: objdump configure:6569: checking how to recognize dependent libraries configure:6771: result: pass_all configure:6862: checking for dlltool configure:6898: result: no configure:6925: checking how to associate runtime and link libraries configure:6954: result: printf %s\n configure:7091: checking for archiver @FILE support configure:7109: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:7109: $? = 0 configure:7113: /usr/bin/ar cru libconftest.a @conftest.lst >&5 /usr/bin/ar: `u' modifier ignored since `D' is the default (see `U') configure:7116: $? = 0 configure:7121: /usr/bin/ar cru libconftest.a @conftest.lst >&5 /usr/bin/ar: `u' modifier ignored since `D' is the default (see `U') /usr/bin/ar: conftest.o: No such file or directory configure:7124: $? = 1 configure:7137: result: @ configure:7201: checking for strip configure:7222: found /usr/bin/strip configure:7234: result: strip configure:7312: checking for ranlib configure:7345: result: /usr/bin/ranlib configure:7447: checking command to parse /usr/bin/nm output from /usr/bin/gcc object configure:7601: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:7604: $? = 0 configure:7608: /usr/bin/nm conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm configure:7611: $? = 0 configure:7677: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c conftstm.o >&5 configure:7680: $? = 0 configure:7719: result: ok configure:7766: checking for sysroot configure:7798: result: no configure:7805: checking for a working dd configure:7850: result: /bin/dd configure:7854: checking how to truncate binary pipes configure:7871: result: /bin/dd bs=4096 count=1 configure:8008: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:8011: $? = 0 configure:8211: checking for mt configure:8232: found /bin/mt configure:8244: result: mt configure:8267: checking if mt is a manifest tool configure:8274: mt '-?' configure:8283: result: no configure:9027: checking for stdio.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for stdlib.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for string.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for inttypes.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for stdint.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for strings.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for sys/stat.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for sys/types.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for unistd.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for sys/time.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9027: checking for sys/param.h configure:9027: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9027: $? = 0 configure:9027: result: yes configure:9052: checking for dlfcn.h configure:9052: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:9052: $? = 0 configure:9052: result: yes configure:9649: checking for objdir configure:9666: result: .libs configure:9932: checking if /usr/bin/gcc supports -fno-rtti -fno-exceptions configure:9951: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C configure:9955: $? = 0 configure:9969: result: no configure:10327: checking for /usr/bin/gcc option to produce PIC configure:10336: result: -fPIC -DPIC configure:10344: checking if /usr/bin/gcc PIC flag -fPIC -DPIC works configure:10363: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -fPIC -DPIC -DPIC conftest.c >&5 configure:10367: $? = 0 configure:10381: result: yes configure:10410: checking if /usr/bin/gcc static flag -static works configure:10440: result: yes configure:10455: checking if /usr/bin/gcc supports -c -o file.o configure:10477: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -o out/conftest2.o conftest.c >&5 configure:10481: $? = 0 configure:10504: result: yes configure:10512: checking if /usr/bin/gcc supports -c -o file.o configure:10561: result: yes configure:10594: checking whether the /usr/bin/gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries configure:11865: result: yes configure:12107: checking dynamic linker characteristics configure:12689: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath -Wl,/foo conftest.c >&5 configure:12689: $? = 0 configure:12929: result: GNU/Linux ld.so configure:13051: checking how to hardcode library paths into programs configure:13076: result: immediate configure:13676: checking whether stripping libraries is possible configure:13681: result: yes configure:13716: checking if libtool supports shared libraries configure:13718: result: yes configure:13721: checking whether to build shared libraries configure:13746: result: no configure:13749: checking whether to build static libraries configure:13753: result: yes configure:13846: checking for gcc configure:13879: result: /usr/bin/gcc configure:14238: checking for C compiler version configure:14247: /usr/bin/gcc --version >&5 gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 Copyright (C) 2017 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:14258: $? = 0 configure:14247: /usr/bin/gcc -v >&5 Using built-in specs. COLLECT_GCC=/usr/bin/gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/7/lto-wrapper OFFLOAD_TARGET_NAMES=nvptx-none OFFLOAD_TARGET_DEFAULT=1 Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 7.5.0-3ubuntu1~18.04' --with-bugurl=file:///usr/share/doc/gcc-7/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --prefix=/usr --with-gcc-major-version-only --program-suffix=-7 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib --enable-objc-gc=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) configure:14258: $? = 0 configure:14247: /usr/bin/gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:14258: $? = 1 configure:14247: /usr/bin/gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? gcc: fatal error: no input files compilation terminated. configure:14258: $? = 1 configure:14247: /usr/bin/gcc -version >&5 gcc: error: unrecognized command line option '-version' gcc: fatal error: no input files compilation terminated. configure:14258: $? = 1 configure:14262: checking whether the compiler supports GNU C configure:14294: result: yes configure:14305: checking whether /usr/bin/gcc accepts -g configure:14373: result: yes configure:14393: checking for /usr/bin/gcc option to enable C11 features configure:14427: result: none needed configure:14551: checking whether /usr/bin/gcc understands -c and -o together configure:14590: result: yes configure:14609: checking dependency style of /usr/bin/gcc configure:14722: result: none configure:14743: checking how to run the C preprocessor configure:14814: result: /usr/bin/cpp configure:14828: /usr/bin/cpp -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c configure:14828: $? = 0 configure:14844: /usr/bin/cpp -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c conftest.c:25:10: fatal error: ac_nonexistent.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:14844: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:14888: checking for python configure:14911: found /home/buildroot/autobuild/run/instance-0/output-1/host/bin/python configure:14924: result: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/python configure:14944: checking for python version configure:14953: result: 3.11 configure:14958: checking for python platform configure:14967: result: linux configure:15030: checking for GNU default python prefix configure:15032: result: ${prefix} configure:15100: checking for GNU default python exec_prefix configure:15102: result: ${exec_prefix} configure:15135: checking for python script directory (pythondir) configure:15171: result: ${PYTHON_PREFIX}/lib/python3.11/site-packages configure:15179: checking for python extension module directory (pyexecdir) configure:15215: result: ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages configure:15228: checking for clang-format configure:15262: result: no configure:15284: checking whether make supports nested variables configure:15303: result: yes configure:15331: checking for /usr/bin/gcc option to enable large file support configure:15366: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:15366: $? = 0 configure:15372: /usr/bin/gcc -DFTYPE=ino_t -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include conftest.c >&5 configure:15372: $? = 0 configure:15397: result: none needed configure:15512: checking for dlopen configure:15544: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c >&5 In file included from /usr/include/dlfcn.h:22:0, from conftest.c:27: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:15544: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | #ifdef HAVE_DLFCN_H | #include | #endif | int | main (void) | { | dlopen(0,0) | ; | return 0; | } configure:15544: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c -ldl >&5 In file included from /usr/include/dlfcn.h:22:0, from conftest.c:27: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:15544: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | #ifdef HAVE_DLFCN_H | #include | #endif | int | main (void) | { | dlopen(0,0) | ; | return 0; | } configure:15587: result: no configure:15835: checking for perl configure:15868: result: /usr/bin/perl configure:15885: checking for Perl5 module Getopt::Std configure:15892: result: yes configure:15897: checking for Perl5 module File::Compare configure:15904: result: yes configure:15914: checking for bison configure:15935: found /home/buildroot/autobuild/run/instance-0/output-1/host/bin/bison configure:15947: result: bison -d configure:15967: checking for flex configure:15988: found /home/buildroot/autobuild/run/instance-0/output-1/host/bin/flex configure:16000: result: flex configure:16049: checking for lex output file root configure:16062: flex conftest.l configure:16066: $? = 0 configure:16075: result: lex.yy configure:16090: checking for lex library configure:16115: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c >&5 In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdio.h:27, from lex.yy.c:18: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:16115: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 2 "conftest.l" | #ifdef __cplusplus | extern "C" | #endif | int yywrap(void); | #line 464 "lex.yy.c" | #line 465 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 7 "conftest.l" | | #line 690 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 8 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 9 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 10 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 11 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 12 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | #ifdef __cplusplus | yyless ((yyinput () != 0)); | #else | yyless ((input () != 0)); | #endif | } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 19 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 20 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 21 "conftest.l" | ECHO; | YY_BREAK | #line 804 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 21 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | yywrap (void) | { | return 1; | } | int | main (void) | { | return ! yylex (); | } configure:16115: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c -lfl >&5 In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdio.h:27, from lex.yy.c:18: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:16115: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 2 "conftest.l" | #ifdef __cplusplus | extern "C" | #endif | int yywrap(void); | #line 464 "lex.yy.c" | #line 465 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 7 "conftest.l" | | #line 690 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 8 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 9 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 10 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 11 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 12 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | #ifdef __cplusplus | yyless ((yyinput () != 0)); | #else | yyless ((input () != 0)); | #endif | } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 19 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 20 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 21 "conftest.l" | ECHO; | YY_BREAK | #line 804 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 21 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | yywrap (void) | { | return 1; | } | int | main (void) | { | return ! yylex (); | } configure:16115: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c -ll >&5 In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdio.h:27, from lex.yy.c:18: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:16115: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 2 "conftest.l" | #ifdef __cplusplus | extern "C" | #endif | int yywrap(void); | #line 464 "lex.yy.c" | #line 465 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 7 "conftest.l" | | #line 690 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 8 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 9 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 10 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 11 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 12 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | #ifdef __cplusplus | yyless ((yyinput () != 0)); | #else | yyless ((input () != 0)); | #endif | } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 19 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 20 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 21 "conftest.l" | ECHO; | YY_BREAK | #line 804 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 21 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | yywrap (void) | { | return 1; | } | int | main (void) | { | return ! yylex (); | } configure:16129: result: not found configure:16133: WARNING: required lex library not found; giving up on flex configure:16145: checking for library containing yywrap configure:16181: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c >&5 /tmp/ccCBEnap.o: In function `main': conftest.c:(.text.startup+0x5): undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:16181: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. | The 'extern "C"' is for builds by C++ compilers; | although this is not generally supported in C code supporting it here | has little cost and some practical benefit (sr 110532). */ | #ifdef __cplusplus | extern "C" | #endif | char yywrap (void); | int | main (void) | { | return yywrap (); | ; | return 0; | } configure:16181: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c -lfl >&5 /home/buildroot/autobuild/run/instance-0/output-1/host/lib/libfl.so: undefined reference to `yylex' collect2: error: ld returned 1 exit status configure:16181: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. | The 'extern "C"' is for builds by C++ compilers; | although this is not generally supported in C code supporting it here | has little cost and some practical benefit (sr 110532). */ | #ifdef __cplusplus | extern "C" | #endif | char yywrap (void); | int | main (void) | { | return yywrap (); | ; | return 0; | } configure:16181: /usr/bin/gcc -o conftest -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib conftest.c -ll >&5 /usr/bin/ld: cannot find -ll collect2: error: ld returned 1 exit status configure:16181: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. | The 'extern "C"' is for builds by C++ compilers; | although this is not generally supported in C code supporting it here | has little cost and some practical benefit (sr 110532). */ | #ifdef __cplusplus | extern "C" | #endif | char yywrap (void); | int | main (void) | { | return yywrap (); | ; | return 0; | } configure:16203: result: no configure:16272: checking for gawk configure:16305: result: mawk configure:16316: checking for ln -s or something else configure:16339: result: ln -s configure:16472: checking for __attribute__ configure:16491: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdlib.h:25, from conftest.c:26: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:16491: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | #include | static void foo(void) __attribute__ ((noreturn)); | | static void | foo(void) | { | exit(1); | } | configure:16507: result: no configure:16520: checking for ld --version-script configure:16542: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -fPIC conftest.c configure:16545: $? = 0 configure:16548: /usr/bin/gcc -shared -Wl,--version-script,conftest.map -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib -o libconftestlib.so conftest.o configure:16551: $? = 0 configure:16560: result: yes configure:16640: checking whether C compiler accepts -Wno-error=enum-conversion configure:16660: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -Werror -Wno-error=enum-conversion -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 cc1: error: -Werror=enum-conversion: no option -Wenum-conversion configure:16660: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | | int | main (void) | { | | ; | return 0; | } configure:16671: result: no configure:16681: checking whether C compiler accepts -Wno-unused-but-set-variable configure:16701: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -Werror -Wno-unused-but-set-variable -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 configure:16701: $? = 0 configure:16712: result: yes configure:16774: checking for openldap configure:16929: result: no configure:17141: checking pkg-config is at least version 0.9.0 configure:17144: result: yes configure:17266: checking for MICROHTTPD configure:17274: $PKG_CONFIG --exists --print-errors "libmicrohttpd >= 0.9.37" Package libmicrohttpd was not found in the pkg-config search path. Perhaps you should add the directory containing `libmicrohttpd.pc' to the PKG_CONFIG_PATH environment variable Package 'libmicrohttpd', required by 'virtual:world', not found configure:17277: $? = 1 configure:17292: $PKG_CONFIG --exists --print-errors "libmicrohttpd >= 0.9.37" Package libmicrohttpd was not found in the pkg-config search path. Perhaps you should add the directory containing `libmicrohttpd.pc' to the PKG_CONFIG_PATH environment variable Package 'libmicrohttpd', required by 'virtual:world', not found configure:17295: $? = 1 Package 'libmicrohttpd', required by 'virtual:world', not found configure:17323: result: no configure:17365: checking for CJWT configure:17373: $PKG_CONFIG --exists --print-errors "libcjwt >= 1.0.0" Package libcjwt was not found in the pkg-config search path. Perhaps you should add the directory containing `libcjwt.pc' to the PKG_CONFIG_PATH environment variable Package 'libcjwt', required by 'virtual:world', not found configure:17376: $? = 1 configure:17391: $PKG_CONFIG --exists --print-errors "libcjwt >= 1.0.0" Package libcjwt was not found in the pkg-config search path. Perhaps you should add the directory containing `libcjwt.pc' to the PKG_CONFIG_PATH environment variable Package 'libcjwt', required by 'virtual:world', not found configure:17394: $? = 1 Package 'libcjwt', required by 'virtual:world', not found configure:17422: result: no configure:17464: checking for CJSON configure:17472: $PKG_CONFIG --exists --print-errors "libcjson >= 1.0.0" Package libcjson was not found in the pkg-config search path. Perhaps you should add the directory containing `libcjson.pc' to the PKG_CONFIG_PATH environment variable Package 'libcjson', required by 'virtual:world', not found configure:17475: $? = 1 configure:17490: $PKG_CONFIG --exists --print-errors "libcjson >= 1.0.0" Package libcjson was not found in the pkg-config search path. Perhaps you should add the directory containing `libcjson.pc' to the PKG_CONFIG_PATH environment variable Package 'libcjson', required by 'virtual:world', not found configure:17493: $? = 1 Package 'libcjson', required by 'virtual:world', not found configure:17521: result: no configure:17590: checking for sqlite3 configure:17751: result: no configure:17837: checking for libintl configure:17989: result: no configure:18124: checking for crypto library configure:18374: result: included libhcrypto configure:18414: checking if compiling threadsafe libraries configure:18523: result: yes configure:19503: checking for inline configure:19520: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 configure:19520: $? = 0 configure:19530: result: inline configure:19548: checking for an ANSI C-conforming const configure:19615: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 configure:19615: $? = 0 configure:19625: result: yes configure:19633: checking for size_t configure:19633: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdio.h:27, from conftest.c:38: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:19633: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_STDIO_H | # include | #endif | #ifdef HAVE_STDLIB_H | # include | #endif | #ifdef HAVE_STRING_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main (void) | { | if (sizeof (size_t)) | return 0; | ; | return 0; | } configure:19633: result: no configure:19647: checking for egrep configure:19717: result: /bin/grep -E configure:19726: checking for pid_t configure:19726: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 conftest.c:35:16: error: duplicate 'unsigned' #define size_t unsigned int ^ conftest.c:35:25: error: two or more data types in declaration specifiers #define size_t unsigned int ^ In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdio.h:27, from conftest.c:39: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:19726: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | /* end confdefs.h. */ | #include | #ifdef HAVE_STDIO_H | # include | #endif | #ifdef HAVE_STDLIB_H | # include | #endif | #ifdef HAVE_STRING_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | | int | main (void) | { | if (sizeof (pid_t)) | return 0; | ; | return 0; | } configure:19726: result: no configure:19748: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 configure:19748: $? = 0 configure:19764: checking for uid_t configure:19764: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 conftest.c:35:16: error: duplicate 'unsigned' #define size_t unsigned int ^ conftest.c:35:25: error: two or more data types in declaration specifiers #define size_t unsigned int ^ In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdio.h:27, from conftest.c:40: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ conftest.c:36:15: error: two or more data types in declaration specifiers #define pid_t int ^ configure:19764: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | /* end confdefs.h. */ | #include | #ifdef HAVE_STDIO_H | # include | #endif | #ifdef HAVE_STDLIB_H | # include | #endif | #ifdef HAVE_STRING_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main (void) | { | if (sizeof (uid_t)) | return 0; | ; | return 0; | } configure:19764: result: no configure:19775: checking for gid_t configure:19775: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 conftest.c:35:16: error: duplicate 'unsigned' #define size_t unsigned int ^ conftest.c:35:25: error: two or more data types in declaration specifiers #define size_t unsigned int ^ In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdio.h:27, from conftest.c:41: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ conftest.c:37:15: error: two or more data types in declaration specifiers #define uid_t int ^ conftest.c:36:15: error: two or more data types in declaration specifiers #define pid_t int ^ configure:19775: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | /* end confdefs.h. */ | #include | #ifdef HAVE_STDIO_H | # include | #endif | #ifdef HAVE_STDLIB_H | # include | #endif | #ifdef HAVE_STRING_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main (void) | { | if (sizeof (gid_t)) | return 0; | ; | return 0; | } configure:19775: result: no configure:19787: checking return type of signal handlers configure:19806: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 In file included from /usr/include/x86_64-linux-gnu/sys/types.h:25:0, from conftest.c:40: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ conftest.c:38:15: error: two or more data types in declaration specifiers #define gid_t int ^ conftest.c:37:15: error: two or more data types in declaration specifiers #define uid_t int ^ conftest.c:36:15: error: two or more data types in declaration specifiers #define pid_t int ^ conftest.c:35:16: error: duplicate 'unsigned' #define size_t unsigned int ^ conftest.c:35:25: error: two or more data types in declaration specifiers #define size_t unsigned int ^ conftest.c: In function 'main': conftest.c:46:10: error: void value not ignored as it ought to be return *(signal (0, 0)) (0) == 1; ~^~~~~~~~~~~~~~~~~~ configure:19806: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | #define gid_t int | /* end confdefs.h. */ | #include | #include | | int | main (void) | { | return *(signal (0, 0)) (0) == 1; | ; | return 0; | } configure:19816: result: void configure:19842: checking for standards.h configure:19842: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 conftest.c:35:16: error: duplicate 'unsigned' #define size_t unsigned int ^ conftest.c:35:25: error: two or more data types in declaration specifiers #define size_t unsigned int ^ In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/stdio.h:27, from conftest.c:45: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ conftest.c:38:15: error: two or more data types in declaration specifiers #define gid_t int ^ conftest.c:37:15: error: two or more data types in declaration specifiers #define uid_t int ^ conftest.c:36:15: error: two or more data types in declaration specifiers #define pid_t int ^ conftest.c:71:10: fatal error: standards.h: No such file or directory #include ^~~~~~~~~~~~~ compilation terminated. configure:19842: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | #define gid_t int | #define RETSIGTYPE void | #define VOID_RETSIGTYPE 1 | #define TIME_WITH_SYS_TIME 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_STDIO_H | # include | #endif | #ifdef HAVE_STDLIB_H | # include | #endif | #ifdef HAVE_STRING_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:19842: result: no configure:19853: checking for netinet/ip.h configure:19868: /usr/bin/cpp -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c In file included from /usr/include/netinet/ip.h:21:0, from conftest.c:47: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:19868: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | #define gid_t int | #define RETSIGTYPE void | #define VOID_RETSIGTYPE 1 | #define TIME_WITH_SYS_TIME 1 | /* end confdefs.h. */ | | #ifdef HAVE_STANDARDS_H | #include | #endif | #include | configure:19879: result: no configure:19853: checking for netinet/tcp.h configure:19868: /usr/bin/cpp -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c In file included from /usr/include/netinet/tcp.h:35:0, from conftest.c:47: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ configure:19868: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | #define gid_t int | #define RETSIGTYPE void | #define VOID_RETSIGTYPE 1 | #define TIME_WITH_SYS_TIME 1 | /* end confdefs.h. */ | | #ifdef HAVE_STANDARDS_H | #include | #endif | #include | configure:19879: result: no configure:19904: checking for egrep -e configure:20034: result: /bin/grep -E configure:20038: checking for /usr/bin/gcc options needed to detect all undeclared functions configure:20060: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 conftest.c: In function 'main': conftest.c:47:8: error: 'strchr' undeclared (first use in this function) (void) strchr; ^~~~~~ conftest.c:47:8: note: each undeclared identifier is reported only once for each function it appears in configure:20060: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | #define gid_t int | #define RETSIGTYPE void | #define VOID_RETSIGTYPE 1 | #define TIME_WITH_SYS_TIME 1 | /* end confdefs.h. */ | | int | main (void) | { | (void) strchr; | ; | return 0; | } configure:20087: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/limits.h:26, from /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed/limits.h:194, from /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed/syslimits.h:7, from /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed/limits.h:34, from conftest.c:44: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ conftest.c:35:16: error: duplicate 'unsigned' #define size_t unsigned int ^ conftest.c:35:25: error: two or more data types in declaration specifiers #define size_t unsigned int ^ configure:20087: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | #define gid_t int | #define RETSIGTYPE void | #define VOID_RETSIGTYPE 1 | #define TIME_WITH_SYS_TIME 1 | /* end confdefs.h. */ | #include | #include | #include | #include | extern void ac_decl (int, char *); | | int | main (void) | { | (void) ac_decl (0, (char *) 0); | (void) ac_decl; | | ; | return 0; | } configure:20060: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -fno-builtin -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 conftest.c: In function 'main': conftest.c:47:8: error: 'strchr' undeclared (first use in this function) (void) strchr; ^~~~~~ conftest.c:47:8: note: each undeclared identifier is reported only once for each function it appears in configure:20060: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | #define gid_t int | #define RETSIGTYPE void | #define VOID_RETSIGTYPE 1 | #define TIME_WITH_SYS_TIME 1 | /* end confdefs.h. */ | | int | main (void) | { | (void) strchr; | ; | return 0; | } configure:20087: /usr/bin/gcc -c -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -fno-builtin -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS= conftest.c >&5 In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33:0, from /usr/include/limits.h:26, from /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed/limits.h:194, from /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed/syslimits.h:7, from /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed/limits.h:34, from conftest.c:44: /usr/include/features.h:363:52: error: operator '&&' has no right operand #if defined _FILE_OFFSET_BITS && _FILE_OFFSET_BITS == 64 ^~ conftest.c:35:16: error: duplicate 'unsigned' #define size_t unsigned int ^ conftest.c:35:25: error: two or more data types in declaration specifiers #define size_t unsigned int ^ configure:20087: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Heimdal" | #define PACKAGE_TARNAME "heimdal" | #define PACKAGE_VERSION "7.99.1" | #define PACKAGE_STRING "Heimdal 7.99.1" | #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" | #define PACKAGE_URL "" | #define PACKAGE "heimdal" | #define VERSION "7.99.1" | #define HAVE_STDIO_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_PARAM_H 1 | #define STDC_HEADERS 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define _GNU_SOURCE 1 | #define HEIM_WEAK_CRYPTO 1 | #define PKINIT 1 | #define DIGEST 1 | #define KX509 1 | #define HAVE_SQLITE3 1 | #define HAVE_SCC 1 | #define SUPPORT_INETD 1 | #define KRB5 1 | #define HCRYPTO_FALLBACK 1 | #define ENABLE_PTHREAD_SUPPORT 1 | #define size_t unsigned int | #define pid_t int | #define uid_t int | #define gid_t int | #define RETSIGTYPE void | #define VOID_RETSIGTYPE 1 | #define TIME_WITH_SYS_TIME 1 | /* end confdefs.h. */ | #include | #include | #include | #include | extern void ac_decl (int, char *); | | int | main (void) | { | (void) ac_decl (0, (char *) 0); | (void) ac_decl; | | ; | return 0; | } configure:20107: result: cannot detect configure:20111: error: in '/home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17': configure:20113: error: cannot make /usr/bin/gcc report undeclared builtins See 'config.log' for more details ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv___attribute__=no ac_cv_build=x86_64-pc-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_c_const=yes ac_cv_c_inline=inline ac_cv_c_undeclared_builtin_options='cannot detect' ac_cv_env_CAPNG_CFLAGS_set= ac_cv_env_CAPNG_CFLAGS_value= ac_cv_env_CAPNG_LIBS_set= ac_cv_env_CAPNG_LIBS_value= ac_cv_env_CC_set=set ac_cv_env_CC_value=/usr/bin/gcc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include' ac_cv_env_CJSON_CFLAGS_set= ac_cv_env_CJSON_CFLAGS_value= ac_cv_env_CJSON_LIBS_set= ac_cv_env_CJSON_LIBS_value= ac_cv_env_CJWT_CFLAGS_set= ac_cv_env_CJWT_CFLAGS_value= ac_cv_env_CJWT_LIBS_set= ac_cv_env_CJWT_LIBS_value= ac_cv_env_CPPFLAGS_set=set ac_cv_env_CPPFLAGS_value=-I/home/buildroot/autobuild/run/instance-0/output-1/host/include ac_cv_env_CPP_set=set ac_cv_env_CPP_value=/usr/bin/cpp ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value='-L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib' ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_LT_SYS_LIBRARY_PATH_set= ac_cv_env_LT_SYS_LIBRARY_PATH_value= ac_cv_env_MICROHTTPD_CFLAGS_set= ac_cv_env_MICROHTTPD_CFLAGS_value= ac_cv_env_MICROHTTPD_LIBS_set= ac_cv_env_MICROHTTPD_LIBS_value= ac_cv_env_PKG_CONFIG_set=set ac_cv_env_PKG_CONFIG_value=/home/buildroot/autobuild/run/instance-0/output-1/host/bin/pkg-config ac_cv_env_PYTHON_set= ac_cv_env_PYTHON_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_dlopen=no ac_cv_funclib_dlopen=no ac_cv_header_dlfcn_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_netinet_ip_h=no ac_cv_header_netinet_tcp_h=no ac_cv_header_standards_h=no ac_cv_header_stdint_h=yes ac_cv_header_stdio_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_param_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_time_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=x86_64-pc-linux-gnu ac_cv_lib_lex='not found' ac_cv_objext=o ac_cv_path_EGREP='/bin/grep -E' ac_cv_path_EGREP_TRADITIONAL='/bin/grep -E' ac_cv_path_FGREP='/bin/grep -F' ac_cv_path_GREP=/bin/grep ac_cv_path_PYTHON=/home/buildroot/autobuild/run/instance-0/output-1/host/bin/python ac_cv_path_SED=/bin/sed ac_cv_path_install='/usr/bin/install -c' ac_cv_path_lt_DD=/bin/dd ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=mawk ac_cv_prog_CLANG_FORMAT=no ac_cv_prog_COMPILE_ET=no ac_cv_prog_CPP=/usr/bin/cpp ac_cv_prog_LEX=flex ac_cv_prog_LN_S='ln -s' ac_cv_prog_PERL=/usr/bin/perl ac_cv_prog_YACC='bison -d' ac_cv_prog_ac_ct_CC=/usr/bin/gcc ac_cv_prog_ac_ct_MANIFEST_TOOL=mt ac_cv_prog_ac_ct_OBJDUMP=objdump ac_cv_prog_ac_ct_RANLIB=/usr/bin/ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_c11= ac_cv_prog_cc_g=yes ac_cv_prog_cc_stdc= ac_cv_prog_lex_root=lex.yy ac_cv_prog_make_make_set=yes ac_cv_search_yywrap=no ac_cv_sys_largefile_opts='none needed' ac_cv_type_gid_t=no ac_cv_type_pid_t=no ac_cv_type_signal=void ac_cv_type_size_t=no ac_cv_type_uid_t=no am_cv_CC_dependencies_compiler_type=none am_cv_make_support_nested_variables=yes am_cv_prog_cc_c_o=yes am_cv_python_platform=linux am_cv_python_pyexecdir='${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages' am_cv_python_pythondir='${PYTHON_PREFIX}/lib/python3.11/site-packages' am_cv_python_version=3.11 ax_cv_check_cflags__Werror__Wno_error_enum_conversion=no ax_cv_check_cflags__Werror__Wno_unused_but_set_variable=yes lt_cv_ar_at_file=@ lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/usr/bin/ld lt_cv_path_NM=/usr/bin/nm lt_cv_path_mainfest_tool=no lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_pic='-fPIC -DPIC' lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_gnu_ld=yes lt_cv_sharedlib_from_linklib_cmd='printf %s\n' lt_cv_shlibpath_overrides_runpath=yes lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_global_symbol_to_import= lt_cv_sys_max_cmd_len=1572864 lt_cv_to_host_file_cmd=func_convert_file_noop lt_cv_to_tool_file_cmd=func_convert_file_noop lt_cv_truncate_bin='/bin/dd bs=4096 count=1' rk_cv_version_script=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} '\''/home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17/missing'\'' aclocal-1.16' AIX4_FALSE='' AIX4_TRUE='#' AIX_DYNAMIC_AFS_FALSE='#' AIX_DYNAMIC_AFS_TRUE='' AIX_EXTRA_KAFS='' AIX_FALSE='' AIX_TRUE='#' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='#' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='0' AM_V='$(V)' AR='/usr/bin/ar' AS='/usr/bin/as' ASN1_COMPILE='$(top_builddir)/lib/asn1/asn1_compile$(EXEEXT)' ASN1_COMPILE_DEP='$(ASN1_COMPILE)' ASN1_TEMPLATING_FALSE='#' ASN1_TEMPLATING_TRUE='' AUTOCONF='${SHELL} '\''/home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17/missing'\'' autoconf' AUTOHEADER='${SHELL} '\''/home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17/missing'\'' autoheader' AUTOMAKE='${SHELL} '\''/home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17/missing'\'' automake-1.16' AWK='mawk' CANONICAL_HOST='x86_64-pc-linux-gnu' CAPNG_CFLAGS='' CAPNG_LIBS='' CATMAN='' CATMANEXT='' CATMAN_FALSE='' CATMAN_TRUE='' CC='/usr/bin/gcc ' CCDEPMODE='depmode=none' CFLAGS='-O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include ' CJSON_CFLAGS='' CJSON_LIBS='' CJWT_CFLAGS='' CJWT_LIBS='' CLANG_FORMAT='true' COMPILE_ET='' COM_ERR_FALSE='' COM_ERR_TRUE='' CPP='/usr/bin/cpp' CPPFLAGS='-I/home/buildroot/autobuild/run/instance-0/output-1/host/include -D_LARGE_FILES= -D_FILE_OFFSET_BITS=' CROSS_COMPILE_FALSE='' CROSS_COMPILE_TRUE='#' CSCOPE='cscope' CTAGS='ctags' CYGPATH_W='echo' DB1LIB=' -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib ' DB3LIB=' -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib ' DBHEADER='' DCE_FALSE='' DCE_TRUE='#' DEFS='' DEPDIR='.deps' DEVELOPER_MODE_FALSE='' DEVELOPER_MODE_TRUE='' DIR_com_err='' DIR_hdbdir='/var/heimdal' DIR_roken='' DLLTOOL='false' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/bin/grep -E' ENABLE_AFS_STRING_TO_KEY='' ENABLE_GCOV_FALSE='' ENABLE_GCOV_TRUE='#' ENABLE_PTHREAD_SUPPORT_FALSE='#' ENABLE_PTHREAD_SUPPORT_TRUE='' ENABLE_SHARED_FALSE='' ENABLE_SHARED_TRUE='#' ETAGS='etags' EXEEXT='' FGREP='/bin/grep -F' FLEXNOUNPUTARGS='' FRAMEWORK_COREFOUNDATION_FALSE='' FRAMEWORK_COREFOUNDATION_TRUE='' FRAMEWORK_SECURITY_FALSE='' FRAMEWORK_SECURITY_TRUE='' GCD_MIG='' GREP='/bin/grep' GROFF='' HAVE_CAPNG_FALSE='' HAVE_CAPNG_TRUE='#' HAVE_CJSON_FALSE='' HAVE_CJSON_TRUE='#' HAVE_CJWT_FALSE='' HAVE_CJWT_TRUE='#' HAVE_DB1_FALSE='' HAVE_DB1_TRUE='#' HAVE_DB3_FALSE='' HAVE_DB3_TRUE='#' HAVE_DBHEADER_FALSE='' HAVE_DBHEADER_TRUE='#' HAVE_DLADDR_FALSE='' HAVE_DLADDR_TRUE='' HAVE_DLOPEN_FALSE='' HAVE_DLOPEN_TRUE='#' HAVE_HCRYPTO_W_OPENSSL_FALSE='' HAVE_HCRYPTO_W_OPENSSL_TRUE='#' HAVE_KEYUTILS_FALSE='' HAVE_KEYUTILS_TRUE='' HAVE_LMDB_FALSE='' HAVE_LMDB_TRUE='#' HAVE_MICROHTTPD_FALSE='' HAVE_MICROHTTPD_TRUE='#' HAVE_NDBM_FALSE='' HAVE_NDBM_TRUE='#' HEIMDAL_DOCUMENTATION_FALSE='' HEIMDAL_DOCUMENTATION_TRUE='' INCLUDES_roken='' INCLUDE_libedit='' INCLUDE_libintl='' INCLUDE_openldap='' INCLUDE_openssl_crypto='' INCLUDE_readline='' INCLUDE_sqlite3='-I$(top_srcdir)/lib/sqlite' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' IRIX_FALSE='' IRIX_TRUE='#' KCM_FALSE='' KCM_TRUE='' KRB5_FALSE='#' KRB5_TRUE='' LD='/usr/bin/ld -m elf_x86_64' LDFLAGS='-L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib' LDFLAGS_VERSION_SCRIPT='-Wl,--version-script,' LEX='${SHELL} '\''/home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17/missing'\'' flex' LEXLIB='' LEX_OUTPUT_ROOT='lex.yy' LIBADD_roken='' LIBEDIT_FALSE='' LIBEDIT_TRUE='' LIBOBJS='' LIBS='-pthread -lpthread ' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIB_AUTH_SUBDIRS='' LIB_add_key='' LIB_bswap16='' LIB_bswap32='' LIB_bswap64='' LIB_com_err='' LIB_com_err_a='' LIB_com_err_so='' LIB_crypt='' LIB_db_create='' LIB_dbm_firstkey='' LIB_dbopen='' LIB_dispatch_async_f='' LIB_dladdr='' LIB_dlopen='' LIB_dn_expand='' LIB_dns_search='' LIB_door_create='' LIB_freeaddrinfo='' LIB_gai_strerror='' LIB_getaddrinfo='' LIB_gethostbyname2='' LIB_getnameinfo='' LIB_getpwnam_r='' LIB_getpwuid_r='' LIB_getsockopt='' LIB_hcrypto='$(top_builddir)/lib/hcrypto/libhcrypto.la' LIB_hcrypto_a='$(top_builddir)/lib/hcrypto/.libs/libhcrypto.a' LIB_hcrypto_appl='-lhcrypto' LIB_hcrypto_so='$(top_builddir)/lib/hcrypto/.libs/libhcrypto.so' LIB_hstrerror='' LIB_kdb='' LIB_libedit='' LIB_libintl='' LIB_loadquery='' LIB_openldap='' LIB_openpty='' LIB_openssl_crypto='' LIB_otp='' LIB_pidfile='' LIB_readline='' LIB_res_ndestroy='' LIB_res_nsearch='' LIB_res_search='' LIB_roken='' LIB_security='' LIB_setsockopt='' LIB_sqlite3='$(top_builddir)/lib/sqlite/libheimsqlite.la' LIB_tgetent='' LIPO='' LMDBLIB=' -L/home/buildroot/autobuild/run/instance-0/output-1/host/lib ' LN_S='ln -s' LTLIBOBJS='' LT_SYS_LIBRARY_PATH='' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='true' MANIFEST_TOOL=':' MICROHTTPD_CFLAGS='' MICROHTTPD_LIBS='' MKDIR_P='/bin/mkdir -p' NDBMLIB='' NM='/usr/bin/nm' NMEDIT='' NO_AFS='' NO_AFS_FALSE='' NO_AFS_TRUE='#' NROFF='' OBJDUMP='objdump' OBJEXT='o' OPENLDAP_FALSE='' OPENLDAP_MODULE_FALSE='' OPENLDAP_MODULE_TRUE='#' OPENLDAP_TRUE='#' OTOOL64='' OTOOL='' OTP_FALSE='' OTP_TRUE='' PACKAGE='heimdal' PACKAGE_BUGREPORT='https://github.com/heimdal/heimdal/issues' PACKAGE_NAME='Heimdal' PACKAGE_STRING='Heimdal 7.99.1' PACKAGE_TARNAME='heimdal' PACKAGE_URL='' PACKAGE_VERSION='7.99.1' PATH_SEPARATOR=':' PERL='/usr/bin/perl' PKG_CONFIG='/home/buildroot/autobuild/run/instance-0/output-1/host/bin/pkg-config' PKINIT_FALSE='#' PKINIT_TRUE='' PTHREAD_CFLAGS='' PTHREAD_LDADD='' PTHREAD_LIBADD='-pthread -lpthread' PYTHON='/home/buildroot/autobuild/run/instance-0/output-1/host/bin/python' PYTHON_EXEC_PREFIX='${exec_prefix}' PYTHON_PLATFORM='linux' PYTHON_PREFIX='${prefix}' PYTHON_VERSION='3.11' RANLIB='/usr/bin/ranlib' SED='/bin/sed' SET_MAKE='' SHELL='/bin/sh' SLC='$(top_builddir)/lib/sl/slc' SLC_DEP='$(SLC)' SQLITE3_FALSE='' SQLITE3_TRUE='#' STRIP='strip' VERSION='7.99.1' VERSIONING='' WFLAGS='' WFLAGS_ENUM_CONV='' WFLAGS_LITE='' YACC='bison -d' ac_ct_AR='' ac_ct_CC='/usr/bin/gcc' ac_ct_DUMPBIN='' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='#' am__include='include' am__isrc='' am__leading_dot='.' am__nodep='' am__quote='' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' bindir='${exec_prefix}/bin' build='x86_64-pc-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='pc' datadir='${datarootdir}' datarootdir='${prefix}/share' db_type='unknown' db_type_preference='' do_roken_rename_FALSE='#' do_roken_rename_TRUE='' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dpagaix_cflags='-D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce' dpagaix_ldadd='-L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r' dpagaix_ldflags='-Wl,-bI:dfspag.exp' dvidir='${docdir}' exec_prefix='NONE' have_err_h_FALSE='' have_err_h_TRUE='' have_fnmatch_h_FALSE='' have_fnmatch_h_TRUE='' have_gcd_FALSE='' have_gcd_TRUE='' have_ifaddrs_h_FALSE='' have_ifaddrs_h_TRUE='' have_scc_FALSE='#' have_scc_TRUE='' have_search_h_FALSE='' have_search_h_TRUE='' have_socket_wrapper_FALSE='' have_socket_wrapper_TRUE='' have_vis_h_FALSE='' have_vis_h_TRUE='' host='x86_64-pc-linux-gnu' host_alias='' host_cpu='x86_64' host_os='linux-gnu' host_vendor='pc' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /home/buildroot/autobuild/run/instance-0/output-1/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/home/buildroot/autobuild/run/instance-0/output-1/host/var' mandir='${datarootdir}/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' pkgpyexecdir='${pyexecdir}/heimdal' pkgpythondir='${pythondir}/heimdal' prefix='/home/buildroot/autobuild/run/instance-0/output-1/host' program_transform_name='s,x,x,' psdir='${docdir}' pyexecdir='${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages' pythondir='${PYTHON_PREFIX}/lib/python3.11/site-packages' runstatedir='${localstatedir}/run' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' subdirs='' sysconfdir='/home/buildroot/autobuild/run/instance-0/output-1/host/etc' target_alias='' versionscript_FALSE='#' versionscript_TRUE='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "Heimdal" #define PACKAGE_TARNAME "heimdal" #define PACKAGE_VERSION "7.99.1" #define PACKAGE_STRING "Heimdal 7.99.1" #define PACKAGE_BUGREPORT "https://github.com/heimdal/heimdal/issues" #define PACKAGE_URL "" #define PACKAGE "heimdal" #define VERSION "7.99.1" #define HAVE_STDIO_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_STRINGS_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_UNISTD_H 1 #define HAVE_SYS_TIME_H 1 #define HAVE_SYS_PARAM_H 1 #define STDC_HEADERS 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" #define _GNU_SOURCE 1 #define HEIM_WEAK_CRYPTO 1 #define PKINIT 1 #define DIGEST 1 #define KX509 1 #define HAVE_SQLITE3 1 #define HAVE_SCC 1 #define SUPPORT_INETD 1 #define KRB5 1 #define HCRYPTO_FALLBACK 1 #define ENABLE_PTHREAD_SUPPORT 1 #define size_t unsigned int #define pid_t int #define uid_t int #define gid_t int #define RETSIGTYPE void #define VOID_RETSIGTYPE 1 #define TIME_WITH_SYS_TIME 1 configure: exit 1