This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by syslog-ng configure 3.26.1, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --target=m68k-buildroot-linux-uclibc --host=m68k-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared --disable-manpages --localstatedir=/var/run --disable-java --disable-java-modules --disable-mongodb --disable-geoip --disable-linux-caps --disable-python --disable-smtp --enable-json --disable-spoof-source --disable-http --disable-amqp --disable-systemd --disable-snmp-dest ## --------- ## ## Platform. ## ## --------- ## hostname = ns304657.ip-46-105-103.eu uname -m = x86_64 uname -r = 4.4.0-179-generic uname -s = Linux uname -v = #209-Ubuntu SMP Fri Apr 24 17:48:44 UTC 2020 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /home/buildroot/autobuild/run/instance-1/output-1/host/bin PATH: /home/buildroot/autobuild/run/instance-1/output-1/host/sbin PATH: /usr/local/bin PATH: /usr/bin PATH: /bin PATH: /usr/local/games PATH: /usr/games ## ----------- ## ## Core tests. ## ## ----------- ## configure:3024: checking whether make supports nested variables configure:3041: result: yes configure:3138: checking for a BSD-compatible install configure:3206: result: /usr/bin/install -c configure:3217: checking whether build environment is sane configure:3272: result: yes configure:3331: checking for m68k-buildroot-linux-uclibc-strip configure:3358: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-strip configure:3423: checking for a thread-safe mkdir -p configure:3462: result: /bin/mkdir -p configure:3469: checking for gawk configure:3499: result: no configure:3469: checking for mawk configure:3485: found /usr/bin/mawk configure:3496: result: mawk configure:3507: checking whether make sets $(MAKE) configure:3529: result: yes configure:3673: checking whether UID '1000' is supported by ustar format configure:3676: result: yes configure:3683: checking whether GID '1000' is supported by ustar format configure:3686: result: yes configure:3694: checking how to create a ustar tar archive configure:3705: tar --version tar (GNU tar) 1.27.1 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later . This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by John Gilmore and Jay Fenlason. configure:3708: $? = 0 configure:3748: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar configure:3751: $? = 0 configure:3755: tar -xf - &5 m68k-linux-gcc.br_real (Buildroot 2020.02) 8.3.0 Copyright (C) 2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4669: $? = 0 configure:4658: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -v >&5 Using built-in specs. COLLECT_GCC=/home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/m68k-linux-gcc.br_real COLLECT_LTO_WRAPPER=/home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../libexec/gcc/m68k-buildroot-linux-uclibc/8.3.0/lto-wrapper Target: m68k-buildroot-linux-uclibc Configured with: ./configure --prefix=/opt/br-m68k-68040-full-2020.02 --sysconfdir=/opt/br-m68k-68040-full-2020.02/etc --enable-static --target=m68k-buildroot-linux-uclibc --with-sysroot=/opt/br-m68k-68040-full-2020.02/m68k-buildroot-linux-uclibc/sysroot --enable-__cxa_atexit --with-gnu-ld --disable-libssp --disable-multilib --disable-decimal-float --with-gmp=/opt/br-m68k-68040-full-2020.02 --with-mpc=/opt/br-m68k-68040-full-2020.02 --with-mpfr=/opt/br-m68k-68040-full-2020.02 --with-pkgversion='Buildroot 2020.02' --with-bugurl=http://bugs.buildroot.net/ --disable-libquadmath --disable-libsanitizer --disable-tls --enable-threads --without-isl --without-cloog --with-cpu=68040 --enable-languages=c,c++ --with-build-time-tools=/opt/br-m68k-68040-full-2020.02/m68k-buildroot-linux-uclibc/bin --enable-shared --disable-libgomp Thread model: posix gcc version 8.3.0 (Buildroot 2020.02) configure:4669: $? = 0 configure:4658: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -V >&5 m68k-linux-gcc.br_real: error: unrecognized command line option '-V' m68k-linux-gcc.br_real: fatal error: no input files compilation terminated. configure:4669: $? = 1 configure:4658: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -qversion >&5 m68k-linux-gcc.br_real: error: unrecognized command line option '-qversion'; did you mean '--version'? m68k-linux-gcc.br_real: fatal error: no input files compilation terminated. configure:4669: $? = 1 configure:4689: checking whether the C compiler works configure:4711: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:4715: $? = 0 configure:4763: result: yes configure:4766: checking for C compiler default output file name configure:4768: result: a.out configure:4774: checking for suffix of executables configure:4781: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:4785: $? = 0 configure:4807: result: configure:4829: checking whether we are cross compiling configure:4867: result: yes configure:4872: checking for suffix of object files configure:4894: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4898: $? = 0 configure:4919: result: o configure:4923: checking whether we are using the GNU C compiler configure:4942: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4942: $? = 0 configure:4951: result: yes configure:4960: checking whether /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc accepts -g configure:4980: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4980: $? = 0 configure:5021: result: yes configure:5038: checking for /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc option to accept ISO C89 configure:5101: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:5101: $? = 0 configure:5114: result: none needed configure:5139: checking whether /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc understands -c and -o together configure:5161: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c conftest.c -o conftest2.o configure:5164: $? = 0 configure:5161: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c conftest.c -o conftest2.o configure:5164: $? = 0 configure:5176: result: yes configure:5204: checking for style of include used by make configure:5232: result: GNU configure:5258: checking dependency style of /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc configure:5369: result: none configure:5384: checking for /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc option to accept ISO C99 configure:5533: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:5533: $? = 0 configure:5546: result: none needed configure:5569: checking for bison configure:5585: found /home/buildroot/autobuild/run/instance-1/output-1/host/bin/bison configure:5596: result: bison -y configure:5613: checking for flex configure:5629: found /home/buildroot/autobuild/run/instance-1/output-1/host/bin/flex configure:5640: result: flex configure:5678: flex conftest.l configure:5682: $? = 0 configure:5684: checking lex output file root configure:5698: result: lex.yy configure:5703: checking lex library configure:5717: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /tmp/ccQ4P8NO.o: in function `yylex': conftest.c:(.text+0xcce): undefined reference to `yywrap' /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: conftest.c:(.text+0xed2): undefined reference to `yywrap' /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /tmp/ccQ4P8NO.o: in function `main': conftest.c:(.text.startup+0xc): undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:5717: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:5717: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lfl >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -lfl collect2: error: ld returned 1 exit status configure:5717: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:5717: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -ll >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -ll collect2: error: ld returned 1 exit status configure:5717: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:5727: result: none needed configure:5733: checking whether yytext is a pointer configure:5750: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /tmp/ccXjMxmC.o: in function `yylex': conftest.c:(.text+0xcce): undefined reference to `yywrap' /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: conftest.c:(.text+0xed2): undefined reference to `yywrap' /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /tmp/ccXjMxmC.o: in function `main': conftest.c:(.text.startup+0xc): undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:5750: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | /* end confdefs.h. */ | | #define YYTEXT_POINTER 1 | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:5758: result: no configure:5771: checking whether make sets $(MAKE) configure:5793: result: yes configure:5911: checking pkg-config is at least version 0.9.0 configure:5914: result: yes configure:5951: checking build system type configure:5965: result: x86_64-pc-linux-gnu configure:5985: checking host system type configure:5998: result: m68k-buildroot-linux-uclibc configure:6039: checking how to print strings configure:6066: result: printf configure:6087: checking for a sed that does not truncate output configure:6151: result: /bin/sed configure:6169: checking for grep that handles long lines and -e configure:6227: result: /bin/grep configure:6232: checking for egrep configure:6294: result: /bin/grep -E configure:6299: checking for fgrep configure:6361: result: /bin/grep -F configure:6396: checking for ld used by /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc configure:6463: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ld configure:6470: checking if the linker (/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ld) is GNU ld configure:6485: result: yes configure:6497: checking for BSD- or MS-compatible name lister (nm) configure:6551: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-nm configure:6681: checking the name lister (/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-nm) interface configure:6688: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:6691: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-nm "conftest.o" configure:6694: output 00000000 B some_variable configure:6701: result: BSD nm configure:6704: checking whether ln -s works configure:6708: result: yes configure:6716: checking the maximum length of command line arguments configure:6847: result: 3458764513820540925 configure:6895: checking how to convert x86_64-pc-linux-gnu file names to m68k-buildroot-linux-uclibc format configure:6935: result: func_convert_file_noop configure:6942: checking how to convert x86_64-pc-linux-gnu file names to toolchain format configure:6962: result: func_convert_file_noop configure:6969: checking for /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ld option to reload object files configure:6976: result: -r configure:7010: checking for m68k-buildroot-linux-uclibc-objdump configure:7037: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-objdump configure:7109: checking how to recognize dependent libraries configure:7309: result: pass_all configure:7354: checking for m68k-buildroot-linux-uclibc-dlltool configure:7384: result: no configure:7394: checking for dlltool configure:7424: result: no configure:7454: checking how to associate runtime and link libraries configure:7481: result: printf %s\n configure:7497: checking for m68k-buildroot-linux-uclibc-ar configure:7524: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ar configure:7605: checking for archiver @FILE support configure:7622: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:7622: $? = 0 configure:7625: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ar cru libconftest.a @conftest.lst >&5 configure:7628: $? = 0 configure:7633: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ar cru libconftest.a @conftest.lst >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ar: conftest.o: No such file or directory configure:7636: $? = 1 configure:7648: result: @ configure:7666: checking for m68k-buildroot-linux-uclibc-strip configure:7693: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-strip configure:7765: checking for m68k-buildroot-linux-uclibc-ranlib configure:7792: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ranlib configure:7934: checking command to parse /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-nm output from /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc object configure:8087: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:8090: $? = 0 configure:8094: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-nm conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm configure:8097: $? = 0 configure:8163: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c conftstm.o >&5 configure:8166: $? = 0 configure:8204: result: ok configure:8251: checking for sysroot configure:8281: result: no configure:8288: checking for a working dd configure:8326: result: /bin/dd configure:8330: checking how to truncate binary pipes configure:8345: result: /bin/dd bs=4096 count=1 configure:8634: checking for m68k-buildroot-linux-uclibc-mt configure:8664: result: no configure:8674: checking for mt configure:8690: found /bin/mt configure:8701: result: mt configure:8713: WARNING: using cross tools not prefixed with host triplet configure:8724: checking if mt is a manifest tool configure:8730: mt '-?' configure:8738: result: no configure:9415: checking how to run the C preprocessor configure:9485: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp configure:9505: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:9505: $? = 0 configure:9519: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:13:10: fatal error: ac_nonexistent.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:9519: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | /* end confdefs.h. */ | #include configure:9548: checking for ANSI C header files configure:9568: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9568: $? = 0 configure:9652: result: yes configure:9665: checking for sys/types.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9665: checking for sys/stat.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9665: checking for stdlib.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9665: checking for string.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9665: checking for memory.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9665: checking for strings.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9665: checking for inttypes.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9665: checking for stdint.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9665: checking for unistd.h configure:9665: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9665: $? = 0 configure:9665: result: yes configure:9679: checking for dlfcn.h configure:9679: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9679: $? = 0 configure:9679: result: yes configure:9933: checking for objdir configure:9948: result: .libs configure:10212: checking if /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc supports -fno-rtti -fno-exceptions configure:10230: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C configure:10234: $? = 0 configure:10247: result: no configure:10605: checking for /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc option to produce PIC configure:10612: result: -fPIC -DPIC configure:10620: checking if /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc PIC flag -fPIC -DPIC works configure:10638: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -fPIC -DPIC -DPIC conftest.c >&5 configure:10642: $? = 0 configure:10655: result: yes configure:10684: checking if /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc static flag -static works configure:10712: result: yes configure:10727: checking if /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc supports -c -o file.o configure:10748: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o out/conftest2.o conftest.c >&5 configure:10752: $? = 0 configure:10774: result: yes configure:10782: checking if /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc supports -c -o file.o configure:10829: result: yes configure:10862: checking whether the /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc linker (/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ld) supports shared libraries configure:12121: result: yes configure:12361: checking dynamic linker characteristics configure:12942: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static -Wl,-rpath -Wl,/foo conftest.c >&5 configure:12942: $? = 0 configure:13179: result: GNU/Linux ld.so configure:13301: checking how to hardcode library paths into programs configure:13326: result: immediate configure:13428: checking for shl_load configure:13428: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /tmp/cc2G2glB.o: in function `main': conftest.c:(.text.startup+0x2): undefined reference to `shl_load' collect2: error: ld returned 1 exit status configure:13428: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | /* Define shl_load to an innocuous variant, in case declares shl_load. | For example, HP-UX 11i declares gettimeofday. */ | #define shl_load innocuous_shl_load | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char shl_load (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef shl_load | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char shl_load (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_shl_load || defined __stub___shl_load | choke me | #endif | | int | main () | { | return shl_load (); | ; | return 0; | } configure:13428: result: no configure:13432: checking for shl_load in -ldld configure:13457: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -ldld >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -ldld collect2: error: ld returned 1 exit status configure:13457: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char shl_load (); | int | main () | { | return shl_load (); | ; | return 0; | } configure:13466: result: no configure:13471: checking for dlopen configure:13471: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:13471: $? = 0 configure:13471: result: yes configure:13628: checking whether a program can dlopen itself configure:13729: result: cross configure:13874: checking whether stripping libraries is possible configure:13879: result: yes configure:13914: checking if libtool supports shared libraries configure:13916: result: yes configure:13919: checking whether to build shared libraries configure:13944: result: no configure:13947: checking whether to build static libraries configure:13951: result: yes configure:14001: checking for python configure:14019: found /home/buildroot/autobuild/run/instance-1/output-1/host/bin/python configure:14031: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/python configure:14052: checking for python version configure:14059: result: 2.7 configure:14071: checking for python platform configure:14078: result: linux2 configure:14104: checking for python script directory configure:14139: result: ${prefix}/lib/python2.7/site-packages configure:14148: checking for python extension module directory configure:14183: result: ${exec_prefix}/lib/python2.7/site-packages configure:14515: checking for C compiler vendor configure:14562: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:31:9: error: 'thisisanerror' undeclared (first use in this function) thisisanerror; ^~~~~~~~~~~~~ conftest.c:31:9: note: each undeclared identifier is reported only once for each function it appears in configure:14562: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | | #if !(defined(__ICC) || defined(__ECC) || defined(__INTEL_COMPILER)) | thisisanerror; | #endif | | ; | return 0; | } configure:14562: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:31:9: error: 'thisisanerror' undeclared (first use in this function) thisisanerror; ^~~~~~~~~~~~~ conftest.c:31:9: note: each undeclared identifier is reported only once for each function it appears in configure:14562: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | | #if !(defined(__xlc__) || defined(__xlC__) || defined(__IBMC__) || defined(__IBMCPP__)) | thisisanerror; | #endif | | ; | return 0; | } configure:14562: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:31:9: error: 'thisisanerror' undeclared (first use in this function) thisisanerror; ^~~~~~~~~~~~~ conftest.c:31:9: note: each undeclared identifier is reported only once for each function it appears in configure:14562: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | | #if !(defined(__PATHCC__) || defined(__PATHSCALE__)) | thisisanerror; | #endif | | ; | return 0; | } configure:14562: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:31:9: error: 'thisisanerror' undeclared (first use in this function) thisisanerror; ^~~~~~~~~~~~~ conftest.c:31:9: note: each undeclared identifier is reported only once for each function it appears in configure:14562: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | | #if !(defined(__clang__)) | thisisanerror; | #endif | | ; | return 0; | } configure:14562: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:31:9: error: 'thisisanerror' undeclared (first use in this function) thisisanerror; ^~~~~~~~~~~~~ conftest.c:31:9: note: each undeclared identifier is reported only once for each function it appears in configure:14562: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | | #if !(defined(_CRAYC)) | thisisanerror; | #endif | | ; | return 0; | } configure:14562: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:31:9: error: 'thisisanerror' undeclared (first use in this function) thisisanerror; ^~~~~~~~~~~~~ conftest.c:31:9: note: each undeclared identifier is reported only once for each function it appears in configure:14562: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | | #if !(defined(__FUJITSU)) | thisisanerror; | #endif | | ; | return 0; | } configure:14562: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14562: $? = 0 configure:14570: result: gnu configure:14575: checking for C compiler version configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14797: $? = 0 configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:29:12: error: size of array 'test_array' is negative static int test_array [1 - 2 * !((__GNUC__) <= 0)]; ^~~~~~~~~~ configure:14797: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | static int test_array [1 - 2 * !((__GNUC__) <= 0)]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:29:12: error: size of array 'test_array' is negative static int test_array [1 - 2 * !((__GNUC__) <= 1)]; ^~~~~~~~~~ configure:14797: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | static int test_array [1 - 2 * !((__GNUC__) <= 1)]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:29:12: error: size of array 'test_array' is negative static int test_array [1 - 2 * !((__GNUC__) <= 3)]; ^~~~~~~~~~ configure:14797: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | static int test_array [1 - 2 * !((__GNUC__) <= 3)]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:29:12: error: size of array 'test_array' is negative static int test_array [1 - 2 * !((__GNUC__) <= 7)]; ^~~~~~~~~~ configure:14797: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | static int test_array [1 - 2 * !((__GNUC__) <= 7)]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14797: $? = 0 configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14797: $? = 0 configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14797: $? = 0 configure:14797: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14797: $? = 0 configure:14806: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14806: $? = 0 configure:14806: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:29:12: error: size of array 'test_array' is negative static int test_array [1 - 2 * !((__GNUC_MINOR__) <= 0)]; ^~~~~~~~~~ configure:14806: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | static int test_array [1 - 2 * !((__GNUC_MINOR__) <= 0)]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:14806: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:29:12: error: size of array 'test_array' is negative static int test_array [1 - 2 * !((__GNUC_MINOR__) <= 1)]; ^~~~~~~~~~ configure:14806: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | static int test_array [1 - 2 * !((__GNUC_MINOR__) <= 1)]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:14806: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14806: $? = 0 configure:14806: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:29:12: error: size of array 'test_array' is negative static int test_array [1 - 2 * !((__GNUC_MINOR__) <= 2)]; ^~~~~~~~~~ configure:14806: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | static int test_array [1 - 2 * !((__GNUC_MINOR__) <= 2)]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:14815: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14815: $? = 0 configure:14815: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:14815: $? = 0 configure:15480: result: 8.3.0 configure:15536: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static -no-pie conftest.c >&5 configure:15536: $? = 0 configure:15582: checking CFLAGS_INITIALIZER_OVERRIDES for gcc -Winitializer-overrides configure:15609: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -pedantic -Werror -Winitializer-overrides -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 m68k-linux-gcc.br_real: error: unrecognized command line option '-Winitializer-overrides'; did you mean '-Wno-suggest-override'? configure:15609: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | return 0; | ; | return 0; | } configure:15609: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -pedantic -Winitializer-overrides -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 m68k-linux-gcc.br_real: error: unrecognized command line option '-Winitializer-overrides'; did you mean '-Wno-suggest-override'? configure:15609: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | return 0; | ; | return 0; | } configure:15623: result: no, unknown configure:15643: checking for special C compiler options needed for large files configure:15688: result: no configure:15694: checking for _FILE_OFFSET_BITS value needed for large files configure:15719: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:15719: $? = 0 configure:15751: result: no configure:15924: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:15924: $? = 0 configure:15935: checking how to enable static linking for certain libraries configure:15941: result: GNU or Solaris configure:15961: checking for ANSI C header files configure:16065: result: yes configure:16073: checking dmalloc.h usability configure:16073: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:60:10: fatal error: dmalloc.h: No such file or directory #include ^~~~~~~~~~~ compilation terminated. configure:16073: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:16073: result: no configure:16073: checking dmalloc.h presence configure:16073: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:27:10: fatal error: dmalloc.h: No such file or directory #include ^~~~~~~~~~~ compilation terminated. configure:16073: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | /* end confdefs.h. */ | #include configure:16073: result: no configure:16073: checking for dmalloc.h configure:16073: result: no configure:16079: checking for dlfcn.h configure:16079: result: yes configure:16096: checking for strings.h configure:16096: result: yes configure:16096: checking getopt.h usability configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16096: $? = 0 configure:16096: result: yes configure:16096: checking getopt.h presence configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:16096: $? = 0 configure:16096: result: yes configure:16096: checking for getopt.h configure:16096: result: yes configure:16096: checking stropts.h usability configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:62:10: fatal error: stropts.h: No such file or directory #include ^~~~~~~~~~~ compilation terminated. configure:16096: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:16096: result: no configure:16096: checking stropts.h presence configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:29:10: fatal error: stropts.h: No such file or directory #include ^~~~~~~~~~~ compilation terminated. configure:16096: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | /* end confdefs.h. */ | #include configure:16096: result: no configure:16096: checking for stropts.h configure:16096: result: no configure:16096: checking sys/strlog.h usability configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:62:10: fatal error: sys/strlog.h: No such file or directory #include ^~~~~~~~~~~~~~ compilation terminated. configure:16096: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:16096: result: no configure:16096: checking sys/strlog.h presence configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:29:10: fatal error: sys/strlog.h: No such file or directory #include ^~~~~~~~~~~~~~ compilation terminated. configure:16096: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | /* end confdefs.h. */ | #include configure:16096: result: no configure:16096: checking for sys/strlog.h configure:16096: result: no configure:16096: checking door.h usability configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:62:10: fatal error: door.h: No such file or directory #include ^~~~~~~~ compilation terminated. configure:16096: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:16096: result: no configure:16096: checking door.h presence configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:29:10: fatal error: door.h: No such file or directory #include ^~~~~~~~ compilation terminated. configure:16096: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | /* end confdefs.h. */ | #include configure:16096: result: no configure:16096: checking for door.h configure:16096: result: no configure:16096: checking sys/capability.h usability configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:62:10: fatal error: sys/capability.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:16096: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:16096: result: no configure:16096: checking sys/capability.h presence configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:29:10: fatal error: sys/capability.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:16096: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | /* end confdefs.h. */ | #include configure:16096: result: no configure:16096: checking for sys/capability.h configure:16096: result: no configure:16096: checking sys/prctl.h usability configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16096: $? = 0 configure:16096: result: yes configure:16096: checking sys/prctl.h presence configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:16096: $? = 0 configure:16096: result: yes configure:16096: checking for sys/prctl.h configure:16096: result: yes configure:16096: checking utmp.h usability configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16096: $? = 0 configure:16096: result: yes configure:16096: checking utmp.h presence configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:16096: $? = 0 configure:16096: result: yes configure:16096: checking for utmp.h configure:16096: result: yes configure:16096: checking utmpx.h usability configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16096: $? = 0 configure:16096: result: yes configure:16096: checking utmpx.h presence configure:16096: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:16096: $? = 0 configure:16096: result: yes configure:16096: checking for utmpx.h configure:16096: result: yes configure:16108: checking tcpd.h usability configure:16108: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:65:10: fatal error: tcpd.h: No such file or directory #include ^~~~~~~~ compilation terminated. configure:16108: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:16108: result: no configure:16108: checking tcpd.h presence configure:16108: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:32:10: fatal error: tcpd.h: No such file or directory #include ^~~~~~~~ compilation terminated. configure:16108: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | /* end confdefs.h. */ | #include configure:16108: result: no configure:16108: checking for tcpd.h configure:16108: result: no configure:16119: checking for struct ucred configure:16119: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16119: $? = 0 configure:16119: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:40:27: error: expected expression before ')' token if (sizeof ((struct ucred))) ^ configure:16119: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | /* end confdefs.h. */ | #define _GNU_SOURCE 1 | #define _DEFAULT_SOURCE 1 | #include | #include | | int | main () | { | if (sizeof ((struct ucred))) | return 0; | ; | return 0; | } configure:16119: result: yes configure:16132: checking for struct cmsgcred configure:16132: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:41:13: error: invalid application of 'sizeof' to incomplete type 'struct cmsgcred' if (sizeof (struct cmsgcred)) ^~~~~~ configure:16132: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | /* end confdefs.h. */ | #define _GNU_SOURCE 1 | #define _DEFAULT_SOURCE 1 | #include | #include | | int | main () | { | if (sizeof (struct cmsgcred)) | return 0; | ; | return 0; | } configure:16132: result: no configure:16148: checking whether struct tm is in sys/time.h or time.h configure:16168: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16168: $? = 0 configure:16175: result: time.h configure:16184: checking for struct tm.tm_gmtoff configure:16184: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16184: $? = 0 configure:16184: result: yes configure:16198: checking for struct msghdr.msg_control configure:16198: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16198: $? = 0 configure:16198: result: yes configure:16209: checking for I_CONSLOG conftest.c:36:10: fatal error: sys/strlog.h: No such file or directory #include ^~~~~~~~~~~~~~ compilation terminated. configure:16230: result: yes configure:16235: checking for O_LARGEFILE configure:16256: result: yes configure:16266: checking for struct sockaddr_storage configure:16285: result: yes configure:16294: checking for struct sockaddr_in6 configure:16313: result: yes configure:16316: checking for PR_SET_KEEPCAPS configure:16338: result: yes configure:16353: checking for modern utmp configure:16382: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:16382: $? = 0 configure:16389: result: yes configure:16398: checking for door_create in -ldoor configure:16423: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -ldoor >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -ldoor collect2: error: ld returned 1 exit status configure:16423: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char door_create (); | int | main () | { | return door_create (); | ; | return 0; | } configure:16432: result: no configure:16438: checking for socket in -lsocket configure:16463: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lsocket >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -lsocket collect2: error: ld returned 1 exit status configure:16463: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char socket (); | int | main () | { | return socket (); | ; | return 0; | } configure:16472: result: no configure:16478: checking for nanosleep in -lrt configure:16503: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lrt >&5 configure:16503: $? = 0 configure:16512: result: yes configure:16518: checking for gethostbyname configure:16518: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16518: $? = 0 configure:16518: result: yes configure:16564: checking for regexec in -lregex configure:16589: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lregex >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -lregex collect2: error: ld returned 1 exit status configure:16589: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char regexec (); | int | main () | { | return regexec (); | ; | return 0; | } configure:16598: result: no configure:16604: checking for res_init in -lresolv configure:16629: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lresolv >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /tmp/ccCyLKwq.o: in function `main': /home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/conftest.c:51: undefined reference to `res_init' collect2: error: ld returned 1 exit status configure:16629: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char res_init (); | int | main () | { | return res_init (); | ; | return 0; | } configure:16638: result: no configure:16666: checking for strdup configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 conftest.c:63:6: warning: conflicting types for built-in function 'strdup' [-Wbuiltin-declaration-mismatch] char strdup (); ^~~~~~ configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for strtol configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for strtoll configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for strtoimax configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for inet_aton configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for inet_ntoa configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for getaddrinfo configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for getnameinfo configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for getutent configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for getutxent configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for pread configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for pwrite configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for strcasestr configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for memrchr configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for localtime_r configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for getprotobynumber_r configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for gmtime_r configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for strnlen configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16666: checking for strtok_r configure:16666: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16666: $? = 0 configure:16666: result: yes configure:16679: checking for clock_gettime configure:16679: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lrt >&5 configure:16679: $? = 0 configure:16679: result: yes configure:16692: checking for inotify_init configure:16692: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16692: $? = 0 configure:16692: result: yes configure:16704: checking for getrandom configure:16704: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:16704: $? = 0 configure:16704: result: yes configure:16725: checking for TCP wrapper library configure:16754: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lwrap >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -lwrap collect2: error: ld returned 1 exit status configure:16754: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | #define HAVE_STRDUP 1 | #define HAVE_STRTOL 1 | #define HAVE_STRTOLL 1 | #define HAVE_STRTOIMAX 1 | #define HAVE_INET_ATON 1 | #define HAVE_INET_NTOA 1 | #define HAVE_GETADDRINFO 1 | #define HAVE_GETNAMEINFO 1 | #define HAVE_GETUTENT 1 | #define HAVE_GETUTXENT 1 | #define HAVE_PREAD 1 | #define HAVE_PWRITE 1 | #define HAVE_STRCASESTR 1 | #define HAVE_MEMRCHR 1 | #define HAVE_LOCALTIME_R 1 | #define HAVE_GETPROTOBYNUMBER_R 1 | #define HAVE_GMTIME_R 1 | #define HAVE_STRNLEN 1 | #define HAVE_STRTOK_R 1 | #define HAVE_CLOCK_GETTIME 1 | #define HAVE_INOTIFY_INIT 1 | #define HAVE_GETRANDOM 1 | /* end confdefs.h. */ | | int | main () | { | | } | | int allow_severity; | int deny_severity; | extern int hosts_access(void); | | int foo(void) | { | hosts_access(); | | ; | return 0; | } configure:16754: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c /usr/local/lib/libwrap.a >&5 m68k-linux-gcc.br_real: error: /usr/local/lib/libwrap.a: No such file or directory configure:16754: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | #define HAVE_STRDUP 1 | #define HAVE_STRTOL 1 | #define HAVE_STRTOLL 1 | #define HAVE_STRTOIMAX 1 | #define HAVE_INET_ATON 1 | #define HAVE_INET_NTOA 1 | #define HAVE_GETADDRINFO 1 | #define HAVE_GETNAMEINFO 1 | #define HAVE_GETUTENT 1 | #define HAVE_GETUTXENT 1 | #define HAVE_PREAD 1 | #define HAVE_PWRITE 1 | #define HAVE_STRCASESTR 1 | #define HAVE_MEMRCHR 1 | #define HAVE_LOCALTIME_R 1 | #define HAVE_GETPROTOBYNUMBER_R 1 | #define HAVE_GMTIME_R 1 | #define HAVE_STRNLEN 1 | #define HAVE_STRTOK_R 1 | #define HAVE_CLOCK_GETTIME 1 | #define HAVE_INOTIFY_INIT 1 | #define HAVE_GETRANDOM 1 | /* end confdefs.h. */ | | int | main () | { | | } | | int allow_severity; | int deny_severity; | extern int hosts_access(void); | | int foo(void) | { | hosts_access(); | | ; | return 0; | } configure:16766: result: configure:16772: checking whether to enable TCP wrapper support configure:16780: result: no configure:16789: checking for dlsym in -ldl configure:16814: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -ldl >&5 configure:16814: $? = 0 configure:16823: result: yes configure:16833: checking for LIBDBI configure:16840: $PKG_CONFIG --exists --print-errors "dbi >= $LIBDBI_MIN_VERSION" Package dbi was not found in the pkg-config search path. Perhaps you should add the directory containing `dbi.pc' to the PKG_CONFIG_PATH environment variable Package 'dbi', required by 'virtual:world', not found configure:16843: $? = 1 configure:16857: $PKG_CONFIG --exists --print-errors "dbi >= $LIBDBI_MIN_VERSION" Package dbi was not found in the pkg-config search path. Perhaps you should add the directory containing `dbi.pc' to the PKG_CONFIG_PATH environment variable Package 'dbi', required by 'virtual:world', not found configure:16860: $? = 1 configure:16874: result: no Package 'dbi', required by 'virtual:world', not found configure:16903: checking for dbi_initialize_r in -ldbi configure:16928: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -ldbi >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -ldbi collect2: error: ld returned 1 exit status configure:16928: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | #define HAVE_STRDUP 1 | #define HAVE_STRTOL 1 | #define HAVE_STRTOLL 1 | #define HAVE_STRTOIMAX 1 | #define HAVE_INET_ATON 1 | #define HAVE_INET_NTOA 1 | #define HAVE_GETADDRINFO 1 | #define HAVE_GETNAMEINFO 1 | #define HAVE_GETUTENT 1 | #define HAVE_GETUTXENT 1 | #define HAVE_PREAD 1 | #define HAVE_PWRITE 1 | #define HAVE_STRCASESTR 1 | #define HAVE_MEMRCHR 1 | #define HAVE_LOCALTIME_R 1 | #define HAVE_GETPROTOBYNUMBER_R 1 | #define HAVE_GMTIME_R 1 | #define HAVE_STRNLEN 1 | #define HAVE_STRTOK_R 1 | #define HAVE_CLOCK_GETTIME 1 | #define HAVE_INOTIFY_INIT 1 | #define HAVE_GETRANDOM 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char dbi_initialize_r (); | int | main () | { | return dbi_initialize_r (); | ; | return 0; | } configure:16937: result: no configure:16945: checking whether to enable SQL support configure:16957: result: no configure:16966: checking for GLIB configure:16973: $PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_MIN_VERSION $GLIB_ADDONS" configure:16976: $? = 0 configure:16990: $PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_MIN_VERSION $GLIB_ADDONS" configure:16993: $? = 0 configure:17051: result: yes configure:17087: checking for g_list_copy_deep configure:17087: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC -static -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre conftest.c -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre >&5 configure:17087: $? = 0 configure:17087: result: yes configure:17087: checking for g_queue_free_full configure:17087: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC -static -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre conftest.c -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre >&5 configure:17087: $? = 0 configure:17087: result: yes configure:17087: checking for g_list_free_full configure:17087: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC -static -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre conftest.c -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre >&5 configure:17087: $? = 0 configure:17087: result: yes configure:17087: checking for g_ptr_array_find_with_equal_func configure:17087: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC -static -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre conftest.c -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre >&5 configure:17087: $? = 0 configure:17087: result: yes configure:17087: checking for g_canonicalize_filename configure:17087: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC -static -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre conftest.c -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre >&5 configure:17087: $? = 0 configure:17087: result: yes configure:17087: checking for g_hash_table_contains configure:17087: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC -static -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre conftest.c -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre >&5 configure:17087: $? = 0 configure:17087: result: yes configure:17098: checking sanity checking Glib headers configure:17129: result: yes configure:17150: checking for MAXMINDDB configure:17152: checking for MMDB_open in -lmaxminddb configure:17177: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lmaxminddb >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -lmaxminddb collect2: error: ld returned 1 exit status configure:17177: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | #define HAVE_STRDUP 1 | #define HAVE_STRTOL 1 | #define HAVE_STRTOLL 1 | #define HAVE_STRTOIMAX 1 | #define HAVE_INET_ATON 1 | #define HAVE_INET_NTOA 1 | #define HAVE_GETADDRINFO 1 | #define HAVE_GETNAMEINFO 1 | #define HAVE_GETUTENT 1 | #define HAVE_GETUTXENT 1 | #define HAVE_PREAD 1 | #define HAVE_PWRITE 1 | #define HAVE_STRCASESTR 1 | #define HAVE_MEMRCHR 1 | #define HAVE_LOCALTIME_R 1 | #define HAVE_GETPROTOBYNUMBER_R 1 | #define HAVE_GMTIME_R 1 | #define HAVE_STRNLEN 1 | #define HAVE_STRTOK_R 1 | #define HAVE_CLOCK_GETTIME 1 | #define HAVE_INOTIFY_INIT 1 | #define HAVE_GETRANDOM 1 | #define HAVE_G_LIST_COPY_DEEP 1 | #define HAVE_G_QUEUE_FREE_FULL 1 | #define HAVE_G_LIST_FREE_FULL 1 | #define HAVE_G_PTR_ARRAY_FIND_WITH_EQUAL_FUNC 1 | #define HAVE_G_CANONICALIZE_FILENAME 1 | #define HAVE_G_HASH_TABLE_CONTAINS 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char MMDB_open (); | int | main () | { | return MMDB_open (); | ; | return 0; | } configure:17186: result: no configure:17228: checking for PCRE configure:17235: $PKG_CONFIG --exists --print-errors "libpcre >= $PCRE_MIN_VERSION" configure:17238: $? = 0 configure:17252: $PKG_CONFIG --exists --print-errors "libpcre >= $PCRE_MIN_VERSION" configure:17255: $? = 0 configure:17293: result: yes configure:17307: checking for OPENSSL configure:17314: $PKG_CONFIG --exists --print-errors "openssl >= $OPENSSL_MIN_VERSION" configure:17317: $? = 0 configure:17331: $PKG_CONFIG --exists --print-errors "openssl >= $OPENSSL_MIN_VERSION" configure:17334: $? = 0 configure:17372: result: yes configure:17436: checking whether SSL_CTX_get0_param is declared configure:17436: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:17436: $? = 0 configure:17436: result: yes configure:17448: checking whether X509_STORE_CTX_get0_cert is declared configure:17448: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:17448: $? = 0 configure:17448: result: yes configure:17460: checking whether X509_get_extension_flags is declared configure:17460: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:17460: $? = 0 configure:17460: result: yes configure:17472: checking whether EVP_MD_CTX_reset is declared configure:17472: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:17472: $? = 0 configure:17472: result: yes configure:17484: checking whether ASN1_STRING_get0_data is declared configure:17484: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:17484: $? = 0 configure:17484: result: yes configure:17496: checking whether DH_set0_pqg is declared configure:17496: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:17496: $? = 0 configure:17496: result: yes configure:17508: checking whether BN_get_rfc3526_prime_2048 is declared configure:17508: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:17508: $? = 0 configure:17508: result: yes configure:17520: checking whether SSL_CTX_set_num_tickets is declared configure:17520: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:17520: $? = 0 configure:17520: result: yes configure:17537: checking for LIBNET configure:17554: result: no configure:17585: checking whether to enable snmp destination driver configure:17617: result: no configure:17632: checking for CRITERION configure:17639: $PKG_CONFIG --exists --print-errors "criterion >= $CRITERION_MIN_VERSION" Package criterion was not found in the pkg-config search path. Perhaps you should add the directory containing `criterion.pc' to the PKG_CONFIG_PATH environment variable Package 'criterion', required by 'virtual:world', not found configure:17642: $? = 1 configure:17656: $PKG_CONFIG --exists --print-errors "criterion >= $CRITERION_MIN_VERSION" Package criterion was not found in the pkg-config search path. Perhaps you should add the directory containing `criterion.pc' to the PKG_CONFIG_PATH environment variable Package 'criterion', required by 'virtual:world', not found configure:17659: $? = 1 configure:17673: result: no Package 'criterion', required by 'virtual:world', not found configure:17689: WARNING: pkg-config was not able to find Criterion >= 2.2.1 configure:17925: $PKG_CONFIG --exists --print-errors "json-c" configure:17928: $? = 0 configure:17943: checking for JSON configure:17950: $PKG_CONFIG --exists --print-errors "$json_module_name >= $JSON_C_MIN_VERSION" configure:17953: $? = 0 configure:17967: $PKG_CONFIG --exists --print-errors "$json_module_name >= $JSON_C_MIN_VERSION" configure:17970: $? = 0 configure:18008: result: yes configure:18038: checking for LIBMONGO configure:18045: $PKG_CONFIG --exists --print-errors "libmongoc-1.0 >= $LMC_MIN_VERSION" Package libmongoc-1.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `libmongoc-1.0.pc' to the PKG_CONFIG_PATH environment variable Package 'libmongoc-1.0', required by 'virtual:world', not found configure:18048: $? = 1 configure:18062: $PKG_CONFIG --exists --print-errors "libmongoc-1.0 >= $LMC_MIN_VERSION" Package libmongoc-1.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `libmongoc-1.0.pc' to the PKG_CONFIG_PATH environment variable Package 'libmongoc-1.0', required by 'virtual:world', not found configure:18065: $? = 1 configure:18079: result: no Package 'libmongoc-1.0', required by 'virtual:world', not found configure:18261: checking for HIREDIS configure:18268: $PKG_CONFIG --exists --print-errors "hiredis >= $HIREDIS_MIN_VERSION" Package hiredis was not found in the pkg-config search path. Perhaps you should add the directory containing `hiredis.pc' to the PKG_CONFIG_PATH environment variable Package 'hiredis', required by 'virtual:world', not found configure:18271: $? = 1 configure:18285: $PKG_CONFIG --exists --print-errors "hiredis >= $HIREDIS_MIN_VERSION" Package hiredis was not found in the pkg-config search path. Perhaps you should add the directory containing `hiredis.pc' to the PKG_CONFIG_PATH environment variable Package 'hiredis', required by 'virtual:world', not found configure:18288: $? = 1 configure:18302: result: no Package 'hiredis', required by 'virtual:world', not found configure:18318: WARNING: pkg-config was not able to find hiredis >= 0.11.0 configure:18322: checking for HIREDIS configure:18329: $PKG_CONFIG --exists --print-errors "libhiredis >= $HIREDIS_MIN_VERSION" Package libhiredis was not found in the pkg-config search path. Perhaps you should add the directory containing `libhiredis.pc' to the PKG_CONFIG_PATH environment variable Package 'libhiredis', required by 'virtual:world', not found configure:18332: $? = 1 configure:18346: $PKG_CONFIG --exists --print-errors "libhiredis >= $HIREDIS_MIN_VERSION" Package libhiredis was not found in the pkg-config search path. Perhaps you should add the directory containing `libhiredis.pc' to the PKG_CONFIG_PATH environment variable Package 'libhiredis', required by 'virtual:world', not found configure:18349: $? = 1 configure:18363: result: no Package 'libhiredis', required by 'virtual:world', not found configure:18379: WARNING: pkg-config was not able to find libhiredis >= 0.11.0 configure:18494: checking for LIBRABBITMQ configure:18501: $PKG_CONFIG --exists --print-errors "librabbitmq >= $LIBRABBITMQ_MIN_VERSION" Package librabbitmq was not found in the pkg-config search path. Perhaps you should add the directory containing `librabbitmq.pc' to the PKG_CONFIG_PATH environment variable Package 'librabbitmq', required by 'virtual:world', not found configure:18504: $? = 1 configure:18518: $PKG_CONFIG --exists --print-errors "librabbitmq >= $LIBRABBITMQ_MIN_VERSION" Package librabbitmq was not found in the pkg-config search path. Perhaps you should add the directory containing `librabbitmq.pc' to the PKG_CONFIG_PATH environment variable Package 'librabbitmq', required by 'virtual:world', not found configure:18521: $? = 1 configure:18535: result: no Package 'librabbitmq', required by 'virtual:world', not found configure:18572: checking for amqp_ssl_socket_set_verify_peer configure:18572: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/8.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /tmp/ccJbS1H3.o: in function `main': /home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/conftest.c:110: undefined reference to `amqp_ssl_socket_set_verify_peer' collect2: error: ld returned 1 exit status configure:18572: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | #define HAVE_STRDUP 1 | #define HAVE_STRTOL 1 | #define HAVE_STRTOLL 1 | #define HAVE_STRTOIMAX 1 | #define HAVE_INET_ATON 1 | #define HAVE_INET_NTOA 1 | #define HAVE_GETADDRINFO 1 | #define HAVE_GETNAMEINFO 1 | #define HAVE_GETUTENT 1 | #define HAVE_GETUTXENT 1 | #define HAVE_PREAD 1 | #define HAVE_PWRITE 1 | #define HAVE_STRCASESTR 1 | #define HAVE_MEMRCHR 1 | #define HAVE_LOCALTIME_R 1 | #define HAVE_GETPROTOBYNUMBER_R 1 | #define HAVE_GMTIME_R 1 | #define HAVE_STRNLEN 1 | #define HAVE_STRTOK_R 1 | #define HAVE_CLOCK_GETTIME 1 | #define HAVE_INOTIFY_INIT 1 | #define HAVE_GETRANDOM 1 | #define HAVE_G_LIST_COPY_DEEP 1 | #define HAVE_G_QUEUE_FREE_FULL 1 | #define HAVE_G_LIST_FREE_FULL 1 | #define HAVE_G_PTR_ARRAY_FIND_WITH_EQUAL_FUNC 1 | #define HAVE_G_CANONICALIZE_FILENAME 1 | #define HAVE_G_HASH_TABLE_CONTAINS 1 | #define HAVE_DECL_SSL_CTX_GET0_PARAM 1 | #define HAVE_DECL_X509_STORE_CTX_GET0_CERT 1 | #define HAVE_DECL_X509_GET_EXTENSION_FLAGS 1 | #define HAVE_DECL_EVP_MD_CTX_RESET 1 | #define HAVE_DECL_ASN1_STRING_GET0_DATA 1 | #define HAVE_DECL_DH_SET0_PQG 1 | #define HAVE_DECL_BN_GET_RFC3526_PRIME_2048 1 | #define HAVE_DECL_SSL_CTX_SET_NUM_TICKETS 1 | /* end confdefs.h. */ | /* Define amqp_ssl_socket_set_verify_peer to an innocuous variant, in case declares amqp_ssl_socket_set_verify_peer. | For example, HP-UX 11i declares gettimeofday. */ | #define amqp_ssl_socket_set_verify_peer innocuous_amqp_ssl_socket_set_verify_peer | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char amqp_ssl_socket_set_verify_peer (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef amqp_ssl_socket_set_verify_peer | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char amqp_ssl_socket_set_verify_peer (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_amqp_ssl_socket_set_verify_peer || defined __stub___amqp_ssl_socket_set_verify_peer | choke me | #endif | | int | main () | { | return amqp_ssl_socket_set_verify_peer (); | ; | return 0; | } configure:18572: result: no configure:18586: checking for LIBRDKAFKA configure:18593: $PKG_CONFIG --exists --print-errors "rdkafka >= $LIBRDKAFKA_MIN_VERSION" Package rdkafka was not found in the pkg-config search path. Perhaps you should add the directory containing `rdkafka.pc' to the PKG_CONFIG_PATH environment variable Package 'rdkafka', required by 'virtual:world', not found configure:18596: $? = 1 configure:18610: $PKG_CONFIG --exists --print-errors "rdkafka >= $LIBRDKAFKA_MIN_VERSION" Package rdkafka was not found in the pkg-config search path. Perhaps you should add the directory containing `rdkafka.pc' to the PKG_CONFIG_PATH environment variable Package 'rdkafka', required by 'virtual:world', not found configure:18613: $? = 1 configure:18627: result: no Package 'rdkafka', required by 'virtual:world', not found configure:18669: checking for RIEMANN_CLIENT configure:18676: $PKG_CONFIG --exists --print-errors "riemann-client >= $LRC_MIN_VERSION" Package riemann-client was not found in the pkg-config search path. Perhaps you should add the directory containing `riemann-client.pc' to the PKG_CONFIG_PATH environment variable Package 'riemann-client', required by 'virtual:world', not found configure:18679: $? = 1 configure:18693: $PKG_CONFIG --exists --print-errors "riemann-client >= $LRC_MIN_VERSION" Package riemann-client was not found in the pkg-config search path. Perhaps you should add the directory containing `riemann-client.pc' to the PKG_CONFIG_PATH environment variable Package 'riemann-client', required by 'virtual:world', not found configure:18696: $? = 1 configure:18710: result: no Package 'riemann-client', required by 'virtual:world', not found configure:18775: checking for libsystemd configure:18782: $PKG_CONFIG --exists --print-errors "libsystemd >= ${LIBSYSTEMD_MIN_VERSION}" Package libsystemd was not found in the pkg-config search path. Perhaps you should add the directory containing `libsystemd.pc' to the PKG_CONFIG_PATH environment variable Package 'libsystemd', required by 'virtual:world', not found configure:18785: $? = 1 configure:18799: $PKG_CONFIG --exists --print-errors "libsystemd >= ${LIBSYSTEMD_MIN_VERSION}" Package libsystemd was not found in the pkg-config search path. Perhaps you should add the directory containing `libsystemd.pc' to the PKG_CONFIG_PATH environment variable Package 'libsystemd', required by 'virtual:world', not found configure:18802: $? = 1 configure:18816: result: no Package 'libsystemd', required by 'virtual:world', not found configure:20105: checking whether to enable Sun STREAMS support configure:20116: result: no configure:20120: checking whether to enable OpenBSD system source support configure:20133: result: no configure:20318: checking whether to enable kafka support configure:20325: result: no configure:20587: checking for struct tm.tm_zone configure:20587: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -c -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:20587: $? = 0 configure:20587: result: yes configure:20662: checking for `timezone' variable in time.h configure:20678: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:20678: $? = 0 configure:20687: result: yes configure:20690: checking for `altzone' variable in time.h configure:20706: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 conftest.c: In function 'main': conftest.c:82:42: error: 'altzone' undeclared (first use in this function); did you mean 'timezone'? int *foo = (int *)0xdeadbeef; return foo[altzone] /* ; */ ^~~~~~~ timezone conftest.c:82:42: note: each undeclared identifier is reported only once for each function it appears in configure:20706: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "syslog-ng" | #define PACKAGE_TARNAME "syslog-ng" | #define PACKAGE_VERSION "3.26.1" | #define PACKAGE_STRING "syslog-ng 3.26.1" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define RELEASE_TYPE "stable" | #define BROCHURE_VERSION "3" | #define COMBINED_VERSION "3 (3.26.1)" | #define SOURCE_REVISION "" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_THREAD_KEYWORD 1 | #define STDC_HEADERS 1 | #define HAVE_STRINGS_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_SYS_PRCTL_H 1 | #define HAVE_UTMP_H 1 | #define HAVE_UTMPX_H 1 | #define HAVE_STRUCT_UCRED 1 | #define HAVE_STRUCT_TM_TM_GMTOFF 1 | #define HAVE_CTRLBUF_IN_MSGHDR 1 | #define HAVE_O_LARGEFILE 1 | #define HAVE_STRUCT_SOCKADDR_STORAGE 1 | #define HAVE_PR_SET_KEEPCAPS 1 | #define HAVE_ENVIRON 1 | #define HAVE_MODERN_UTMP 1 | #define HAVE_STRDUP 1 | #define HAVE_STRTOL 1 | #define HAVE_STRTOLL 1 | #define HAVE_STRTOIMAX 1 | #define HAVE_INET_ATON 1 | #define HAVE_INET_NTOA 1 | #define HAVE_GETADDRINFO 1 | #define HAVE_GETNAMEINFO 1 | #define HAVE_GETUTENT 1 | #define HAVE_GETUTXENT 1 | #define HAVE_PREAD 1 | #define HAVE_PWRITE 1 | #define HAVE_STRCASESTR 1 | #define HAVE_MEMRCHR 1 | #define HAVE_LOCALTIME_R 1 | #define HAVE_GETPROTOBYNUMBER_R 1 | #define HAVE_GMTIME_R 1 | #define HAVE_STRNLEN 1 | #define HAVE_STRTOK_R 1 | #define HAVE_CLOCK_GETTIME 1 | #define HAVE_INOTIFY_INIT 1 | #define HAVE_GETRANDOM 1 | #define HAVE_G_LIST_COPY_DEEP 1 | #define HAVE_G_QUEUE_FREE_FULL 1 | #define HAVE_G_LIST_FREE_FULL 1 | #define HAVE_G_PTR_ARRAY_FIND_WITH_EQUAL_FUNC 1 | #define HAVE_G_CANONICALIZE_FILENAME 1 | #define HAVE_G_HASH_TABLE_CONTAINS 1 | #define HAVE_DECL_SSL_CTX_GET0_PARAM 1 | #define HAVE_DECL_X509_STORE_CTX_GET0_CERT 1 | #define HAVE_DECL_X509_GET_EXTENSION_FLAGS 1 | #define HAVE_DECL_EVP_MD_CTX_RESET 1 | #define HAVE_DECL_ASN1_STRING_GET0_DATA 1 | #define HAVE_DECL_DH_SET0_PQG 1 | #define HAVE_DECL_BN_GET_RFC3526_PRIME_2048 1 | #define HAVE_DECL_SSL_CTX_SET_NUM_TICKETS 1 | #define HAVE_STRUCT_TM_TM_ZONE 1 | #define HAVE_TM_ZONE 1 | /* end confdefs.h. */ | #include | int | main () | { | int *foo = (int *)0xdeadbeef; return foo[altzone] /* ; */ | ; | return 0; | } configure:20715: result: no configure:20718: checking for `daylight' variable in time.h configure:20734: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:20734: $? = 0 configure:20743: result: yes configure:20774: checking for fmemopen configure:20774: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc -o conftest -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5 configure:20774: $? = 0 configure:20774: result: yes configure:21483: checking whether to enable Valgrind on the unit tests configure:21496: checking for valgrind configure:21526: result: no configure:21551: result: yes configure:21848: checking that generated files are newer than configure configure:21854: result: done configure:22029: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by syslog-ng config.status 3.26.1, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on ns304657.ip-46-105-103.eu config.status:1484: creating syslog-ng-native-connector.pc config.status:1484: creating dist.conf config.status:1484: creating Makefile config.status:1484: creating syslog-ng.pc config.status:1484: creating libtest/syslog-ng-test.pc config.status:1484: creating scripts/update-patterndb config.status:1484: creating config.h config.status:1744: executing depfiles commands config.status:1744: executing libtool commands config.status:1744: executing syslog-ng-config.h commands config.status:2418: creating syslog-ng-config.h - prefix SYSLOG_NG for config.h defines configure:24371: === configuring in lib/ivykis (/home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/lib/ivykis) configure:24434: running /bin/sh ./configure.gnu --disable-option-checking '--prefix=/usr' '--target=m68k-buildroot-linux-uclibc' '--host=m68k-buildroot-linux-uclibc' '--build=x86_64-pc-linux-gnu' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--enable-static' '--disable-shared' '--disable-manpages' '--localstatedir=/var/run' '--disable-java' '--disable-java-modules' '--disable-mongodb' '--disable-geoip' '--disable-linux-caps' '--disable-python' '--disable-smtp' '--enable-json' '--disable-spoof-source' '--disable-http' '--disable-amqp' '--disable-systemd' '--disable-snmp-dest' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=m68k-buildroot-linux-uclibc' 'target_alias=m68k-buildroot-linux-uclibc' 'CC=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static' 'LDFLAGS= -static' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'PKG_CONFIG=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/pkg-config' 'CPP=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp' --cache-file=/dev/null --srcdir=. configure:24371: === configuring in lib/jsonc (/home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/lib/jsonc) configure:24434: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--target=m68k-buildroot-linux-uclibc' '--host=m68k-buildroot-linux-uclibc' '--build=x86_64-pc-linux-gnu' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--enable-static' '--disable-shared' '--disable-manpages' '--localstatedir=/var/run' '--disable-java' '--disable-java-modules' '--disable-mongodb' '--disable-geoip' '--disable-linux-caps' '--disable-python' '--disable-smtp' '--enable-json' '--disable-spoof-source' '--disable-http' '--disable-amqp' '--disable-systemd' '--disable-snmp-dest' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=m68k-buildroot-linux-uclibc' 'target_alias=m68k-buildroot-linux-uclibc' 'CC=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static' 'LDFLAGS= -static' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'PKG_CONFIG=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/pkg-config' 'CPP=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp' --cache-file=/dev/null --srcdir=. ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-pc-linux-gnu ac_cv_c_bigendian=yes ac_cv_c_compiler_gnu=yes ac_cv_cflags_gcc_option__Winitializer_overrides='no, unknown' ac_cv_env_CC_set=set ac_cv_env_CC_value=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static' ac_cv_env_CPPFLAGS_set=set ac_cv_env_CPPFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' ac_cv_env_CPP_set=set ac_cv_env_CPP_value=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp ac_cv_env_CRITERION_CFLAGS_set= ac_cv_env_CRITERION_CFLAGS_value= ac_cv_env_CRITERION_LIBS_set= ac_cv_env_CRITERION_LIBS_value= ac_cv_env_GLIB_CFLAGS_set= ac_cv_env_GLIB_CFLAGS_value= ac_cv_env_GLIB_LIBS_set= ac_cv_env_GLIB_LIBS_value= ac_cv_env_HIREDIS_CFLAGS_set= ac_cv_env_HIREDIS_CFLAGS_value= ac_cv_env_HIREDIS_LIBS_set= ac_cv_env_HIREDIS_LIBS_value= ac_cv_env_IVYKIS_CFLAGS_set= ac_cv_env_IVYKIS_CFLAGS_value= ac_cv_env_IVYKIS_LIBS_set= ac_cv_env_IVYKIS_LIBS_value= ac_cv_env_IVYKIS_VERSION_CHECK_CFLAGS_set= ac_cv_env_IVYKIS_VERSION_CHECK_CFLAGS_value= ac_cv_env_IVYKIS_VERSION_CHECK_LIBS_set= ac_cv_env_IVYKIS_VERSION_CHECK_LIBS_value= ac_cv_env_JSON_CFLAGS_set= ac_cv_env_JSON_CFLAGS_value= ac_cv_env_JSON_LIBS_set= ac_cv_env_JSON_LIBS_value= ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value=' -static' ac_cv_env_LIBCAP_CFLAGS_set= ac_cv_env_LIBCAP_CFLAGS_value= ac_cv_env_LIBCAP_LIBS_set= ac_cv_env_LIBCAP_LIBS_value= ac_cv_env_LIBDBI_CFLAGS_set= ac_cv_env_LIBDBI_CFLAGS_value= ac_cv_env_LIBDBI_LIBS_set= ac_cv_env_LIBDBI_LIBS_value= ac_cv_env_LIBMONGO_CFLAGS_set= ac_cv_env_LIBMONGO_CFLAGS_value= ac_cv_env_LIBMONGO_LIBS_set= ac_cv_env_LIBMONGO_LIBS_value= ac_cv_env_LIBRABBITMQ_CFLAGS_set= ac_cv_env_LIBRABBITMQ_CFLAGS_value= ac_cv_env_LIBRABBITMQ_LIBS_set= ac_cv_env_LIBRABBITMQ_LIBS_value= ac_cv_env_LIBRDKAFKA_CFLAGS_set= ac_cv_env_LIBRDKAFKA_CFLAGS_value= ac_cv_env_LIBRDKAFKA_LIBS_set= ac_cv_env_LIBRDKAFKA_LIBS_value= ac_cv_env_LIBSYSTEMD_JOURNAL_CFLAGS_set= ac_cv_env_LIBSYSTEMD_JOURNAL_CFLAGS_value= ac_cv_env_LIBSYSTEMD_JOURNAL_LIBS_set= ac_cv_env_LIBSYSTEMD_JOURNAL_LIBS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_LT_SYS_LIBRARY_PATH_set= ac_cv_env_LT_SYS_LIBRARY_PATH_value= ac_cv_env_OPENSSL_CFLAGS_set= ac_cv_env_OPENSSL_CFLAGS_value= ac_cv_env_OPENSSL_LIBS_set= ac_cv_env_OPENSSL_LIBS_value= ac_cv_env_PCRE_CFLAGS_set= ac_cv_env_PCRE_CFLAGS_value= ac_cv_env_PCRE_LIBS_set= ac_cv_env_PCRE_LIBS_value= ac_cv_env_PKG_CONFIG_LIBDIR_set= ac_cv_env_PKG_CONFIG_LIBDIR_value= ac_cv_env_PKG_CONFIG_PATH_set= ac_cv_env_PKG_CONFIG_PATH_value= ac_cv_env_PKG_CONFIG_set=set ac_cv_env_PKG_CONFIG_value=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/pkg-config ac_cv_env_PYTHON_CFLAGS_set= ac_cv_env_PYTHON_CFLAGS_value= ac_cv_env_PYTHON_LIBS_set= ac_cv_env_PYTHON_LIBS_value= ac_cv_env_PYTHON_set= ac_cv_env_PYTHON_value= ac_cv_env_RIEMANN_CLIENT_CFLAGS_set= ac_cv_env_RIEMANN_CLIENT_CFLAGS_value= ac_cv_env_RIEMANN_CLIENT_LIBS_set= ac_cv_env_RIEMANN_CLIENT_LIBS_value= ac_cv_env_YACC_set= ac_cv_env_YACC_value= ac_cv_env_YFLAGS_set= ac_cv_env_YFLAGS_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=x86_64-pc-linux-gnu ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=m68k-buildroot-linux-uclibc ac_cv_env_libsystemd_CFLAGS_set= ac_cv_env_libsystemd_CFLAGS_value= ac_cv_env_libsystemd_LIBS_set= ac_cv_env_libsystemd_LIBS_value= ac_cv_env_libsystemd_daemon_CFLAGS_set= ac_cv_env_libsystemd_daemon_CFLAGS_value= ac_cv_env_libsystemd_daemon_LIBS_set= ac_cv_env_libsystemd_daemon_LIBS_value= ac_cv_env_target_alias_set=set ac_cv_env_target_alias_value=m68k-buildroot-linux-uclibc ac_cv_func_amqp_ssl_socket_set_verify_peer=no ac_cv_func_calloc_0_nonnull=yes ac_cv_func_clock_gettime=yes ac_cv_func_dlopen=yes ac_cv_func_fmemopen=yes ac_cv_func_g_canonicalize_filename=yes ac_cv_func_g_hash_table_contains=yes ac_cv_func_g_list_copy_deep=yes ac_cv_func_g_list_free_full=yes ac_cv_func_g_ptr_array_find_with_equal_func=yes ac_cv_func_g_queue_free_full=yes ac_cv_func_getaddrinfo=yes ac_cv_func_gethostbyname=yes ac_cv_func_getnameinfo=yes ac_cv_func_getprotobynumber_r=yes ac_cv_func_getrandom=yes ac_cv_func_getutent=yes ac_cv_func_getutxent=yes ac_cv_func_gmtime_r=yes ac_cv_func_inet_aton=yes ac_cv_func_inet_ntoa=yes ac_cv_func_inotify_init=yes ac_cv_func_localtime_r=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_memcmp_working=yes ac_cv_func_memrchr=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_pread=yes ac_cv_func_pwrite=yes ac_cv_func_realloc_0_nonnull=yes ac_cv_func_shl_load=no ac_cv_func_strcasestr=yes ac_cv_func_strdup=yes ac_cv_func_strnlen=yes ac_cv_func_strtoimax=yes ac_cv_func_strtok_r=yes ac_cv_func_strtol=yes ac_cv_func_strtoll=yes ac_cv_have_decl_ASN1_STRING_get0_data=yes ac_cv_have_decl_BN_get_rfc3526_prime_2048=yes ac_cv_have_decl_DH_set0_pqg=yes ac_cv_have_decl_EVP_MD_CTX_reset=yes ac_cv_have_decl_SSL_CTX_get0_param=yes ac_cv_have_decl_SSL_CTX_set_num_tickets=yes ac_cv_have_decl_X509_STORE_CTX_get0_cert=yes ac_cv_have_decl_X509_get_extension_flags=yes ac_cv_have_decl_malloc=yes ac_cv_have_tls=yes ac_cv_header_dlfcn_h=yes ac_cv_header_dmalloc_h=no ac_cv_header_door_h=no ac_cv_header_getopt_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_stropts_h=no ac_cv_header_sys_capability_h=no ac_cv_header_sys_prctl_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_strlog_h=no ac_cv_header_sys_types_h=yes ac_cv_header_tcpd_h=no ac_cv_header_unistd_h=yes ac_cv_header_utmp_h=yes ac_cv_header_utmpx_h=yes ac_cv_host=m68k-buildroot-linux-uclibc ac_cv_lbl_unaligned_fail=no ac_cv_lib_dbi_dbi_initialize_r=no ac_cv_lib_dl_dlsym=yes ac_cv_lib_dld_shl_load=no ac_cv_lib_door_door_create=no ac_cv_lib_lex='none needed' ac_cv_lib_maxminddb_MMDB_open=no ac_cv_lib_regex_regexec=no ac_cv_lib_resolv_res_init=no ac_cv_lib_rt_nanosleep=yes ac_cv_lib_socket_socket=no ac_cv_member_struct_msghdr_msg_control=yes ac_cv_member_struct_tm_tm_gmtoff=yes ac_cv_member_struct_tm_tm_zone=yes ac_cv_objext=o ac_cv_path_EGREP='/bin/grep -E' ac_cv_path_FGREP='/bin/grep -F' ac_cv_path_GREP=/bin/grep ac_cv_path_PYTHON=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/python ac_cv_path_SED=/bin/sed ac_cv_path_install='/usr/bin/install -c' ac_cv_path_lt_DD=/bin/dd ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AR=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ar ac_cv_prog_AWK=mawk ac_cv_prog_CC=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc ac_cv_prog_CPP=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp ac_cv_prog_LEX=flex ac_cv_prog_OBJDUMP=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-objdump ac_cv_prog_RANLIB=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ranlib ac_cv_prog_STRIP=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-strip ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_MANIFEST_TOOL=mt ac_cv_prog_cc_c89= ac_cv_prog_cc_c99= ac_cv_prog_cc_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=no ac_cv_prog_make_make_set=yes ac_cv_struct_tm=time.h ac_cv_sys_file_offset_bits=no ac_cv_sys_largefile_CC=no ac_cv_type_struct_cmsgcred=no ac_cv_type_struct_ucred=yes am_cv_CC_dependencies_compiler_type=none am_cv_make_support_nested_variables=yes am_cv_prog_cc_c_o=yes am_cv_prog_tar_ustar=gnutar am_cv_python_platform=linux2 am_cv_python_pyexecdir='${exec_prefix}/lib/python2.7/site-packages' am_cv_python_pythondir='${prefix}/lib/python2.7/site-packages' am_cv_python_version=2.7 ax_cv_c_compiler_vendor=gnu ax_cv_c_compiler_version=8.3.0 blb_cv_c_i_conslog=yes blb_cv_c_lwrap= blb_cv_c_modern_utmp=yes blb_cv_c_o_largefile=yes blb_cv_c_struct_sockaddr_in6=yes blb_cv_c_struct_sockaddr_storage=yes blb_cv_glib_sane=yes blb_cv_keepcaps=yes gl_cv_func_malloc_0_nonnull=yes lt_cv_ar_at_file=@ lt_cv_deplibs_check_method=pass_all lt_cv_dlopen=dlopen lt_cv_dlopen_libs= lt_cv_dlopen_self=cross lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ld lt_cv_path_NM=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-nm lt_cv_path_mainfest_tool=no lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_pic='-fPIC -DPIC' lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_gnu_ld=yes lt_cv_sharedlib_from_linklib_cmd='printf %s\n' lt_cv_shlibpath_overrides_runpath=no lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_global_symbol_to_import= lt_cv_sys_lib_search_path_spec= lt_cv_sys_max_cmd_len=3458764513820540925 lt_cv_to_host_file_cmd=func_convert_file_noop lt_cv_to_tool_file_cmd=func_convert_file_noop lt_cv_truncate_bin='/bin/dd bs=4096 count=1' mb_cv_var_altzone=no mb_cv_var_daylight=yes mb_cv_var_timezone=yes pkg_cv_GLIB_CFLAGS='-I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC ' pkg_cv_GLIB_LIBS='-L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre ' pkg_cv_JSON_CFLAGS='-I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/json-c ' pkg_cv_JSON_LIBS='-L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -ljson-c ' pkg_cv_OPENSSL_CFLAGS= pkg_cv_OPENSSL_LIBS='-L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lssl -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lz -latomic -lpthread -lcrypto -lz -latomic -lpthread ' pkg_cv_PCRE_CFLAGS='-DPCRE_STATIC ' pkg_cv_PCRE_LIBS='-L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lpcre ' ## ----------------- ## ## Output variables. ## ## ----------------- ## $(MAKE) $(AM_MAKEFLAGS) -k check-valgrind-tool VALGRIND_TOOL=$(tool); \ $(if $(VALGRIND_HAVE_TOOL_$(tool))$(VALGRIND_HAVE_TOOL_exp_$(tool)), \ ) \ LOG_COMPILER="$(VALGRIND_LOG_COMPILER)" \ LOG_FLAGS="$(valgrind_$(VALGRIND_TOOL)_flags)" \ TESTS_ENVIRONMENT="$(VALGRIND_TESTS_ENVIRONMENT)" \ TEST_SUITE_LOG=test-suite-$(VALGRIND_TOOL).log $(MAKE) check-TESTS \ $(TESTS_ENVIRONMENT) \ $(VALGRIND) $(VALGRIND_SUPPRESSIONS) --error-exitcode=1 $(VALGRIND_FLAGS) $(valgrind_lt) \ ) -$(foreach tool,$(valgrind_tools), \ @echo "Need to reconfigure with --enable-valgrind" @echo "Need to reconfigure with --enable-valgrind" G_DEBUG=fatal-warnings,fatal-criticals,gc-friendly G_SLICE=always-malloc,debug-blocks \ env VALGRIND=$(VALGRIND) \ # # (Default: --num-callers=30) # files to load. (Default: empty) # memcheck, helgrind, drd, sgcheck). (Default: various) # - VALGRIND_$toolname_FLAGS: Flags to pass to Valgrind $toolname (one of: # - VALGRIND_FLAGS: General flags to pass to all Valgrind tools. # - VALGRIND_SUPPRESSIONS_FILES: Space-separated list of Valgrind suppressions # Internal use # Optional variables # Optional: # Support running with and without libtool. # Use recursive makes in order to ignore errors during check # Valgrind check # Valgrind running ' .PHONY: check-valgrind check-valgrind-tool ACLOCAL='${SHELL} /home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/missing aclocal-1.15' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='#' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='0' AM_V='$(V)' AR='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ar' AUTOCONF='${SHELL} /home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/missing autoconf' AUTOHEADER='${SHELL} /home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/missing autoheader' AUTOMAKE='${SHELL} /home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/missing automake-1.15' AWK='mawk' BASE_LIBS=' -lrt' BROCHURE_VERSION='3' CC='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-gcc' CCDEPMODE='depmode=none' CFLAGS=' -O2 -g -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -static' COMBINED_VERSION='3 (3.26.1)' CORE_DEPS_LIBS=' -lrt -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre $(top_builddir)/lib/eventlog/src/libevtlog.la $(top_builddir)/lib/secret-storage/libsecret-storage.la -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lpcre -ldl -Wl,--whole-archive -L$(top_builddir)/lib/ivykis/src -livykis -Wl,--no-whole-archive' CPP='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-cpp' CPPFLAGS='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC -I$(top_srcdir)/lib/eventlog/src -I$(top_builddir)/lib/eventlog/src -DPCRE_STATIC -isystem $(top_srcdir)/lib/ivykis/src/include -isystem $(top_builddir)/lib/ivykis/src/include -D_GNU_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64' CRITERION_CFLAGS='' CRITERION_LIBS='' CURRDATE='Tue, 08 Sep 2020 11:40:44 +0000' CYGPATH_W='echo' DEFS='-DHAVE_CONFIG_H' DEPDIR='.deps' DISTCHECK_CONFIGURE_FLAGS += --disable-valgrind DISTCHECK_CONFIGURE_FLAGS ?= DLLTOOL='false' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/bin/grep -E' ENABLE_AMQP_FALSE='' ENABLE_AMQP_TRUE='#' ENABLE_ENV_WRAPPER_FALSE='' ENABLE_ENV_WRAPPER_TRUE='#' ENABLE_EXTRA_WARNINGS_FALSE='' ENABLE_EXTRA_WARNINGS_TRUE='#' ENABLE_GEOIP2_FALSE='' ENABLE_GEOIP2_TRUE='#' ENABLE_HTTP_FALSE='' ENABLE_HTTP_TRUE='#' ENABLE_IPV6_FALSE='#' ENABLE_IPV6_TRUE='' ENABLE_JAVA_FALSE='' ENABLE_JAVA_MODULES_FALSE='' ENABLE_JAVA_MODULES_TRUE='#' ENABLE_JAVA_TRUE='#' ENABLE_JOURNALD_FALSE='' ENABLE_JOURNALD_TRUE='#' ENABLE_JSON_FALSE='#' ENABLE_JSON_TRUE='' ENABLE_KAFKA_FALSE='' ENABLE_KAFKA_TRUE='#' ENABLE_MANPAGES_FALSE='' ENABLE_MANPAGES_TRUE='#' ENABLE_MONGODB_FALSE='' ENABLE_MONGODB_TRUE='#' ENABLE_NATIVE_FALSE='#' ENABLE_NATIVE_TRUE='' ENABLE_OPENBSD_SYSTEM_SOURCE_FALSE='' ENABLE_OPENBSD_SYSTEM_SOURCE_TRUE='#' ENABLE_PACCT_FALSE='' ENABLE_PACCT_TRUE='#' ENABLE_PYTHON_FALSE='' ENABLE_PYTHON_TRUE='#' ENABLE_REDIS_FALSE='' ENABLE_REDIS_TRUE='#' ENABLE_RIEMANN_FALSE='' ENABLE_RIEMANN_TRUE='#' ENABLE_SMTP_FALSE='' ENABLE_SMTP_TRUE='#' ENABLE_SNMP_DEST_FALSE='' ENABLE_SNMP_DEST_TRUE='#' ENABLE_SQL_FALSE='' ENABLE_SQL_TRUE='#' ENABLE_STOMP_FALSE='#' ENABLE_STOMP_TRUE='' ENABLE_SUN_STREAMS_FALSE='' ENABLE_SUN_STREAMS_TRUE='#' ENABLE_SYSTEMD_FALSE='' ENABLE_SYSTEMD_TRUE='#' ENABLE_SYSTEMD_UNIT_INSTALL_FALSE='' ENABLE_SYSTEMD_UNIT_INSTALL_TRUE='#' ENABLE_TESTING_FALSE='' ENABLE_TESTING_TRUE='#' EXEEXT='' FGREP='/bin/grep -F' GLIB_CFLAGS='-I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -pthread -DPCRE_STATIC ' GLIB_LIBS='-L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre ' GRADLE='' GREP='/bin/grep' HAVE_FMEMOPEN_FALSE='#' HAVE_FMEMOPEN_TRUE='' HAVE_GETRANDOM_FALSE='#' HAVE_GETRANDOM_TRUE='' HAVE_INOTIFY_FALSE='#' HAVE_INOTIFY_TRUE='' HAVE_PYTHON_INTERPRETER_FALSE='#' HAVE_PYTHON_INTERPRETER_TRUE='' HIREDIS_CFLAGS='' HIREDIS_LIBS='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' INTERNAL_IVYKIS_CFLAGS='-isystem ${includedir}/syslog-ng/ivykis' IVYKIS_CFLAGS='-isystem $(top_srcdir)/lib/ivykis/src/include -isystem $(top_builddir)/lib/ivykis/src/include' IVYKIS_INTERNAL_FALSE='#' IVYKIS_INTERNAL_TRUE='' IVYKIS_LIBS='-Wl,--whole-archive -L$(top_builddir)/lib/ivykis/src -livykis -Wl,--no-whole-archive' IVYKIS_SUBDIRS='lib/ivykis' IVYKIS_VERSION_CHECK_CFLAGS='' IVYKIS_VERSION_CHECK_LIBS='' JAR='' JAVAC='' JAVAH='' JNI_CFLAGS='' JNI_LIBS='' JSON_CFLAGS='-I/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/include/json-c ' JSON_DEPENDENCY='' JSON_INTERNAL_FALSE='' JSON_INTERNAL_TRUE='#' JSON_LIBS='-L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -ljson-c ' JSON_SUBDIRS='lib/jsonc' LD='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ld' LDFLAGS=' -static' LEX='flex' LEXLIB='' LEX_OUTPUT_ROOT='lex.yy' LIBCAP_CFLAGS='' LIBCAP_LIBS='' LIBCURL_CFLAGS='' LIBCURL_LIBS='' LIBDBI_CFLAGS='' LIBDBI_LIBS='' LIBESMTP_CFLAGS='' LIBESMTP_LIBS='' LIBMONGO_CFLAGS='' LIBMONGO_INTERNAL_FALSE='' LIBMONGO_INTERNAL_TRUE='#' LIBMONGO_LIBS='' LIBMONGO_SUBDIRS='' LIBNET_CFLAGS='' LIBNET_LIBS='' LIBOBJS='' LIBRABBITMQ_CFLAGS='' LIBRABBITMQ_INTERNAL_FALSE='' LIBRABBITMQ_INTERNAL_TRUE='#' LIBRABBITMQ_LIBS='' LIBRABBITMQ_SUBDIRS='' LIBRDKAFKA_CFLAGS='' LIBRDKAFKA_LIBS='' LIBS='' LIBSYSTEMD_JOURNAL_CFLAGS='' LIBSYSTEMD_JOURNAL_LIBS='' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIBWRAP_CFLAGS='' LIBWRAP_LIBS='' LIPO='' LN_S='ln -s' LTLIBOBJS='' LT_SYS_LIBRARY_PATH='' MAKEINFO='${SHELL} /home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/missing makeinfo' MANIFEST_TOOL=':' MAXMINDDB_LIBS='' MKDIR_P='/bin/mkdir -p' MODULE_DEPS_LIBS='$(top_builddir)/lib/libsyslog-ng.la' MODULE_LDFLAGS='-avoid-version -module -no-undefined' MOSTLYCLEANFILES += $(valgrind_log_files) MOSTLYCLEANFILES ?= NETSNMP_CFLAGS='' NETSNMP_LIBS='' NM='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-nm' NMEDIT='' NOSETESTS='' NOSETESTS_FALSE='' NOSETESTS_TRUE='#' NO_PIE_LDFLAG='-no-pie' OBJDUMP='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-objdump' OBJEXT='o' OPENSSL_CFLAGS='' OPENSSL_LIBS='-L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lssl -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lz -latomic -lpthread -lcrypto -lz -latomic -lpthread ' OTOOL64='' OTOOL='' PACKAGE='syslog-ng' PACKAGE_BUGREPORT='' PACKAGE_NAME='syslog-ng' PACKAGE_STRING='syslog-ng 3.26.1' PACKAGE_TARNAME='syslog-ng' PACKAGE_URL='' PACKAGE_VERSION='3.26.1' PATH_SEPARATOR=':' PCRE_CFLAGS='-DPCRE_STATIC ' PCRE_LIBS='-L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lpcre ' PKG_CONFIG='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/pkg-config' PKG_CONFIG_LIBDIR='' PKG_CONFIG_PATH='' PYLINT='' PYLINT_FALSE='' PYLINT_TRUE='#' PYTHON='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/python' PYTHON_CFLAGS='' PYTHON_EXEC_PREFIX='${exec_prefix}' PYTHON_LIBS='' PYTHON_PLATFORM='linux2' PYTHON_PREFIX='${prefix}' PYTHON_VERSION='2.7' RANLIB='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-ranlib' RELEASE_TAG='unstable' RELEASE_TYPE='stable' RESOLV_LIBS='' RIEMANN_CLIENT_CFLAGS='' RIEMANN_CLIENT_LIBS='' SED='/bin/sed' SET_MAKE='' SHELL='/bin/sh' SNAPSHOT_VERSION='' SOURCE_REVISION='' STRIP='/home/buildroot/autobuild/run/instance-1/output-1/host/bin/m68k-linux-strip' SYSLOGNG_DEPS_LIBS=' -lrt -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre $(top_builddir)/lib/eventlog/src/libevtlog.la $(top_builddir)/lib/secret-storage/libsecret-storage.la -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lpcre -ldl' SYSLOGNG_LINK='$(LINK)' TECHNICAL_VERSION='3.26.1' TOOL_DEPS_LIBS=' -lrt -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -pthread -lpcre $(top_builddir)/lib/eventlog/src/libevtlog.la $(top_builddir)/lib/secret-storage/libsecret-storage.la -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../m68k-buildroot-linux-uclibc/sysroot/usr/lib -lpcre -ldl' VALGRIND='' VALGRIND_CHECK_RULES=' VALGRIND_ENABLED='yes' VALGRIND_ENABLED_FALSE='#' VALGRIND_ENABLED_TRUE='' VALGRIND_FLAGS ?= --num-callers=30 VALGRIND_HAVE_TOOL_drd='' VALGRIND_HAVE_TOOL_exp_sgcheck='' VALGRIND_HAVE_TOOL_helgrind='' VALGRIND_HAVE_TOOL_memcheck='' VALGRIND_LOG_COMPILER = \ VALGRIND_SUPPRESSIONS ?= $(addprefix --suppressions=,$(VALGRIND_SUPPRESSIONS_FILES)) VALGRIND_TESTS_ENVIRONMENT = \ VALGRIND_drd_FLAGS ?= VALGRIND_helgrind_FLAGS ?= --history-level=approx VALGRIND_memcheck_FLAGS ?= --leak-check=full --show-reachable=no VALGRIND_sgcheck_FLAGS ?= VERSION='3.26.1' XSL_STYLESHEET='' YACC='bison -y' YFLAGS='-d' ZLIB_CFLAGS='' ZLIB_LIBS='' abs_topsrcdir='/home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1' ac_ct_AR='' ac_ct_CC='' ac_ct_DUMPBIN='' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='#' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='#' am__include='include' am__isrc='' am__leading_dot='.' am__nodep='' am__quote='' am__tar='tar --format=ustar -chf - "$$tardir"' am__untar='tar -xf -' bindir='${exec_prefix}/bin' build='x86_64-pc-linux-gnu' build_alias='x86_64-pc-linux-gnu' build_cpu='x86_64' build_os='linux-gnu' build_vendor='pc' check-valgrind-tool: check-valgrind: config_includedir='${datadir}/syslog-ng/include' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' else else else endif endif endif exec_prefix='/usr' host='m68k-buildroot-linux-uclibc' host_alias='m68k-buildroot-linux-uclibc' host_cpu='m68k' host_os='linux-uclibc' host_vendor='buildroot' htmldir='${docdir}' ifeq ($(VALGRIND_ENABLED),yes) ifeq ($(VALGRIND_ENABLED),yes) ifneq ($(LIBTOOL),) includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' libsystemd_CFLAGS='' libsystemd_LIBS='' libsystemd_daemon_CFLAGS='' libsystemd_daemon_LIBS='' localedir='${datarootdir}/locale' localstatedir='/var/run' loggenplugindir='${moduledir}/loggen' mandir='${datarootdir}/man' mkdir_p='$(MKDIR_P)' moduledir='${exec_prefix}/lib/syslog-ng' oldincludedir='/usr/include' pdfdir='${docdir}' pidfiledir='${localstatedir}' pkgpyexecdir='${pyexecdir}/syslog-ng' pkgpythondir='${pythondir}/syslog-ng' prefix='/usr' program_transform_name='s&^&&' psdir='${docdir}' pyexecdir='${exec_prefix}/lib/python2.7/site-packages' python_moduledir='${exec_prefix}/lib/syslog-ng/python' pythondir='${prefix}/lib/python2.7/site-packages' sbindir='${exec_prefix}/sbin' scldir='${datadir}/syslog-ng/include/scl' sharedstatedir='${prefix}/com' subdirs=' lib/ivykis lib/jsonc' sysconfdir='/etc' systemdsystemunitdir='none' target_alias='m68k-buildroot-linux-uclibc' timezonedir='' toolsdir='${datadir}/syslog-ng/tools' valgrind_drd_flags = --tool=drd $(VALGRIND_drd_FLAGS) valgrind_helgrind_flags = --tool=helgrind $(VALGRIND_helgrind_FLAGS) valgrind_log_files = $(addprefix test-suite-,$(addsuffix .log,$(valgrind_tools))) valgrind_lt = valgrind_lt = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=execute valgrind_memcheck_flags = --tool=memcheck $(VALGRIND_memcheck_FLAGS) valgrind_quiet = $(valgrind_quiet_$(V)) valgrind_quiet_ = $(valgrind_quiet_$(AM_DEFAULT_VERBOSITY)) valgrind_quiet_0 = --quiet valgrind_sgcheck_flags = --tool=exp-sgcheck $(VALGRIND_sgcheck_FLAGS) valgrind_tools = memcheck helgrind drd sgcheck with_ivykis='internal' xsddir='${datadir}/syslog-ng/xsd' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "syslog-ng" #define PACKAGE_TARNAME "syslog-ng" #define PACKAGE_VERSION "3.26.1" #define PACKAGE_STRING "syslog-ng 3.26.1" #define PACKAGE_BUGREPORT "" #define PACKAGE_URL "" #define RELEASE_TYPE "stable" #define BROCHURE_VERSION "3" #define COMBINED_VERSION "3 (3.26.1)" #define SOURCE_REVISION "" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" #define HAVE_THREAD_KEYWORD 1 #define STDC_HEADERS 1 #define HAVE_STRINGS_H 1 #define HAVE_GETOPT_H 1 #define HAVE_SYS_PRCTL_H 1 #define HAVE_UTMP_H 1 #define HAVE_UTMPX_H 1 #define HAVE_STRUCT_UCRED 1 #define HAVE_STRUCT_TM_TM_GMTOFF 1 #define HAVE_CTRLBUF_IN_MSGHDR 1 #define HAVE_O_LARGEFILE 1 #define HAVE_STRUCT_SOCKADDR_STORAGE 1 #define HAVE_PR_SET_KEEPCAPS 1 #define HAVE_ENVIRON 1 #define HAVE_MODERN_UTMP 1 #define HAVE_STRDUP 1 #define HAVE_STRTOL 1 #define HAVE_STRTOLL 1 #define HAVE_STRTOIMAX 1 #define HAVE_INET_ATON 1 #define HAVE_INET_NTOA 1 #define HAVE_GETADDRINFO 1 #define HAVE_GETNAMEINFO 1 #define HAVE_GETUTENT 1 #define HAVE_GETUTXENT 1 #define HAVE_PREAD 1 #define HAVE_PWRITE 1 #define HAVE_STRCASESTR 1 #define HAVE_MEMRCHR 1 #define HAVE_LOCALTIME_R 1 #define HAVE_GETPROTOBYNUMBER_R 1 #define HAVE_GMTIME_R 1 #define HAVE_STRNLEN 1 #define HAVE_STRTOK_R 1 #define HAVE_CLOCK_GETTIME 1 #define HAVE_INOTIFY_INIT 1 #define HAVE_GETRANDOM 1 #define HAVE_G_LIST_COPY_DEEP 1 #define HAVE_G_QUEUE_FREE_FULL 1 #define HAVE_G_LIST_FREE_FULL 1 #define HAVE_G_PTR_ARRAY_FIND_WITH_EQUAL_FUNC 1 #define HAVE_G_CANONICALIZE_FILENAME 1 #define HAVE_G_HASH_TABLE_CONTAINS 1 #define HAVE_DECL_SSL_CTX_GET0_PARAM 1 #define HAVE_DECL_X509_STORE_CTX_GET0_CERT 1 #define HAVE_DECL_X509_GET_EXTENSION_FLAGS 1 #define HAVE_DECL_EVP_MD_CTX_RESET 1 #define HAVE_DECL_ASN1_STRING_GET0_DATA 1 #define HAVE_DECL_DH_SET0_PQG 1 #define HAVE_DECL_BN_GET_RFC3526_PRIME_2048 1 #define HAVE_DECL_SSL_CTX_SET_NUM_TICKETS 1 #define HAVE_STRUCT_TM_TM_ZONE 1 #define HAVE_TM_ZONE 1 #define HAVE_TIMEZONE 1 #define HAVE_DAYLIGHT 1 #define HAVE_FMEMOPEN 1 #define JOURNALD_OFF 0 #define JOURNALD_OPTIONAL 1 #define JOURNALD_SYSTEM 2 #define VERSION "3.26.1" #define SOURCE_REVISION "" #define LICENSE_VERSION "" #define PATH_PREFIX "/usr" #define PATH_EXECPREFIX "/usr" #define PATH_SYSCONFDIR "/etc" #define PATH_LOCALSTATEDIR "/var/run" #define PATH_PIDFILEDIR "${localstatedir}" #define PATH_DATAROOTDIR "${prefix}/share" #define PATH_DATADIR "${datarootdir}" #define PATH_CONFIG_INCLUDEDIR "${datadir}/syslog-ng/include" #define PATH_SCLDIR "${datadir}/syslog-ng/include/scl" #define PATH_XSDDIR "${datadir}/syslog-ng/xsd" #define PATH_LIBEXECDIR "${exec_prefix}/libexec" #define PATH_MODULEDIR "${exec_prefix}/lib/syslog-ng" #define PYTHON_MODULE_DIR "${exec_prefix}/lib/syslog-ng/python" #define PYTHON3_HOME_DIR "" #define PYTHON2_HOME_DIR "" #define PATH_LOGGENPLUGINDIR "${moduledir}/loggen" #define MODULE_PATH "${exec_prefix}/lib/syslog-ng" #define JAVA_MODULE_PATH "${exec_prefix}/lib/syslog-ng/java-modules" #define PATH_TOPSRC_DIR "/home/buildroot/autobuild/run/instance-1/output-1/build/syslog-ng-3.26.1" #define PACKAGE_NAME "syslog-ng" #define WITH_COMPILE_DATE 1 #define ENABLE_FORCED_SERVER_MODE 1 #define ENABLE_DEBUG 0 #define ENABLE_GPROF 0 #define ENABLE_MEMTRACE 0 #define ENABLE_SPOOF_SOURCE 0 #define ENABLE_IPV6 1 #define ENABLE_TCP_WRAPPER 0 #define ENABLE_LINUX_CAPS 0 #define ENABLE_ENV_WRAPPER 0 #define ENABLE_SYSTEMD 0 #define ENABLE_KAFKA 0 #define SYSTEMD_JOURNAL_MODE SYSLOG_NG_JOURNALD_OFF #define HAVE_INOTIFY 1 #define ENABLE_PYTHONv2 0 #define ENABLE_PYTHONv3 0 #define USE_CONST_IVYKIS_MOCK 1 configure: exit 0