libtoolize: copying file 'config/lt~obsolete.m4'
configure.ac:46: installing 'config/compile'
configure.ac:49: installing 'config/config.guess'
configure.ac:49: installing 'config/config.sub'
configure.ac:15: installing 'config/install-sh'
configure.ac:15: installing 'config/missing'
Makefile.am: installing 'config/depcomp'
parallel-tests: installing 'config/test-driver'
>>> zyre 2.0.0 Patching libtool
patching file /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/config/ltmain.sh
Hunk #1 succeeded at 2694 (offset 7 lines).
Hunk #2 succeeded at 4284 (offset 7 lines).
Hunk #3 succeeded at 6579 (offset 25 lines).
Hunk #4 succeeded at 6589 (offset 25 lines).
Hunk #5 succeeded at 6882 (offset 25 lines).
Hunk #6 succeeded at 7174 (offset 25 lines).
Hunk #7 succeeded at 8140 (offset 28 lines).
Hunk #8 succeeded at 10769 (offset 59 lines).
(cd /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ar" AS="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-as" LD="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld" NM="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-nm" CC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc" GCC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc" CPP="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-cpp" CXX="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-g++" FC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gfortran" F77="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gfortran" RANLIB="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ranlib" READELF="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-readelf" STRIP="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip" OBJCOPY="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no gt_cv_func_gnugettext1_libc=yes gt_cv_func_gnugettext2_libc=yes  CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-musleabihf --host=arm-buildroot-linux-musleabihf --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared  --without-docs )
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for arm-buildroot-linux-musleabihf-strip... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether UID '1001' is supported by ustar format... yes
checking whether GID '1001' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking whether make supports nested variables... (cached) yes
checking for arm-buildroot-linux-musleabihf-gcc... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc accepts -g... yes
checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc option to accept ISO C89... none needed
checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc... none
checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc option to accept ISO C99... none needed
checking build system type... x86_64-pc-linux-gnu
checking host system type... arm-buildroot-linux-musleabihf
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld
checking if the linker (/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-nm
checking the name lister (/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to arm-buildroot-linux-musleabihf format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld option to reload object files... -r
checking for arm-buildroot-linux-musleabihf-objdump... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-objdump
checking how to recognize dependent libraries... pass_all
checking for arm-buildroot-linux-musleabihf-dlltool... dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for arm-buildroot-linux-musleabihf-ar... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ar
checking for archiver @FILE support... @
checking for arm-buildroot-linux-musleabihf-strip... (cached) /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip
checking for arm-buildroot-linux-musleabihf-ranlib... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ranlib
checking command to parse /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-nm output from /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for arm-buildroot-linux-musleabihf-mt... no
checking for mt... mt
configure: WARNING: using cross tools not prefixed with host triplet
checking if mt is a manifest tool... no
checking how to run the C preprocessor... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-cpp
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc supports -fno-rtti -fno-exceptions... no
checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc option to produce PIC... -fPIC -DPIC
checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc PIC flag -fPIC -DPIC works... yes
checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc static flag -static works... yes
checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc supports -c -o file.o... yes
checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc supports -c -o file.o... (cached) yes
checking whether the /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc linker (/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for a sed that does not truncate output... (cached) /bin/sed
checking for gawk... (cached) gawk
checking pkg-config is at least version 0.9.0... yes
checking for libzmq... yes
checking for czmq... yes
checking whether to build documentation... no
checking whether to install manpages... no
checking for ANSI C header files... (cached) yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking ifaddrs.h usability... yes
checking ifaddrs.h presence... yes
checking for ifaddrs.h... yes
checking for net/if.h... yes
checking for net/if_media.h... no
checking for linux/wireless.h... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking for ssize_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for uint32_t... yes
checking for working volatile... yes
checking whether byte ordering is bigendian... (cached) no
checking for presence of CMake recipes... no
configure: ENABLE_PERF_LOCAL defined
configure: ENABLE_PERF_REMOTE defined
configure: ENABLE_ZPINGER defined
configure: ENABLE_ZTESTER_BEACON defined
configure: ENABLE_ZTESTER_GOSSIP defined
configure: ENABLE_ZYRE_SELFTEST defined
checking return type of signal handlers... void
checking for perror... yes
checking for gettimeofday... yes
checking for memset... no
checking for getifaddrs... yes
configure: Building stable and legacy API + draft API
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating src/libzyre.pc
config.status: creating src/platform.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls

##########################################################################
#                                SUMMARY                                 #
##########################################################################

Package version............... : zyre-2.0.0

C compiler.................... : /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc
C compiler flags.............. : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os
C++ compiler.................. : /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-g++
C++ compiler flags............ : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os
Configure date................ : 2020-08-22 04:45
Build architecture............ : arm-buildroot-linux-musleabihf
Build docs.................... : no
Build host.................... : gcc159.bak.milne.osuosl.org
Build user.................... : buildroot
Draft API..................... : yes
Install dir................... : /usr
Install man pages............. : no

Help:
Use the Draft API (default = yes):
--enable-drafts=(yes|no)

Build the docs and install the man pages (default = yes):
--with-docs=(yes|no) *requires asciidoc and xmlto

##########################################################################

Configure complete! Now proceed with:
    - 'make'               compile the project
    - 'make check'         run the project's selftest
    - 'make install'       install the project to /usr

Further options are:
    - 'make callcheck'     run the project's selftest with valgrind to
                           check for performance leaks
    - 'make check-verbose' run the project's selftest in verbose mode
    - 'make code'          generate code from models in src directory
                           (requires zproject and zproto)
    - 'make debug'         run the project's selftest under gdb
    - 'make memcheck'      run the project's selftest with valgrind to
                           check for memory leaks
    - 'make coverage'      generate project's selftest coverage report
                           expects --with-gcov option for configure

>>> zyre 2.0.0 Building
PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"  /usr/bin/make -j4  -C /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/
make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
Making all in doc
make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
SKIPPING documentation generation and formatting (BUILD_DOC was not required and/or tools are missing)
make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
  CC       src/src_libzyre_la-zyre.lo
  CC       src/src_libzyre_la-zyre_event.lo
  CC       src/src_libzyre_la-zre_msg.lo
  CC       src/src_libzyre_la-zyre_peer.lo
  CC       src/src_libzyre_la-zyre_group.lo
  CC       src/src_libzyre_la-zyre_node.lo
  CC       src/src_libzyre_la-zyre_private_selftest.lo
  CC       src/src_zpinger-zpinger.o
  CC       src/src_perf_local-perf_local.o
  CC       src/src_perf_remote-perf_remote.o
  CC       src/src_ztester_beacon-ztester_beacon.o
  CC       src/src_ztester_gossip-ztester_gossip.o
  CC       src/src_zyre_selftest-zyre_selftest.o
  CCLD     src/libzyre.la
libtool: warning: '/home/buildroot/autobuild/instance-0/output-1/host/bin/../arm-buildroot-linux-musleabihf/sysroot/usr/lib/libzmq.la' seems to be moved
libtool: warning: '/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/9.3.0/../../../../arm-buildroot-linux-musleabihf/lib/libstdc++.la' seems to be moved
libtool: warning: '/home/buildroot/autobuild/instance-0/output-1/host/bin/../arm-buildroot-linux-musleabihf/sysroot/usr/lib/libuuid.la' seems to be moved
libtool: warning: '/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/9.3.0/../../../../arm-buildroot-linux-musleabihf/lib/libstdc++.la' seems to be moved
  CCLD     src/zpinger
  CCLD     src/perf_local
  CCLD     src/perf_remote
  CCLD     src/ztester_beacon
  CCLD     src/ztester_gossip
  CCLD     src/zyre_selftest
make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
>>> zyre 2.0.0 Installing to staging directory
PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"  /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot install -C /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/
make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
Making install in doc
make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
SKIPPING documentation generation and formatting (BUILD_DOC was not required and/or tools are missing)
make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/share/zproject/zyre'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/include'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   src/libzyre.la '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 api/zyre.api api/zyre_event.api '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/share/zproject/zyre'
 /usr/bin/install -c -m 644 include/zyre.h include/zyre_event.h include/zyre_library.h '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/include'
 /usr/bin/install -c -m 644 src/libzyre.pc '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/pkgconfig'
libtool: install: /usr/bin/install -c src/.libs/libzyre.so.2.0.0 /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/libzyre.so.2.0.0
libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib && { ln -s -f libzyre.so.2.0.0 libzyre.so.2 || { rm -f libzyre.so.2 && ln -s libzyre.so.2.0.0 libzyre.so.2; }; })
libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib && { ln -s -f libzyre.so.2.0.0 libzyre.so || { rm -f libzyre.so && ln -s libzyre.so.2.0.0 libzyre.so; }; })
libtool: install: /usr/bin/install -c src/.libs/libzyre.lai /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/libzyre.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c src/zpinger '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/bin'
libtool: install: /usr/bin/install -c src/zpinger /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/bin/zpinger
make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
>>> zyre 2.0.0 Fixing libtool files
for la in $(find /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib* -name "*.la"); do \
	cp -a "${la}" "${la}.fixed" && \
	/bin/sed -i -e "s:/home/buildroot/autobuild/instance-0/output-1:@BASE_DIR@:g" \
		-e "s:/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot:@STAGING_DIR@:g" \
		 \
		-e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \
		-e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \
		 \
		-e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot:g" \
		-e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-0/output-1:g" \
		"${la}.fixed" && \
	if cmp -s "${la}" "${la}.fixed"; then \
		rm -f "${la}.fixed"; \
	else \
		mv "${la}.fixed" "${la}"; \
	fi || exit 1; \
done
>>> zyre 2.0.0 Installing to target
PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"  /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/target install -C /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/
make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
Making install in doc
make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
SKIPPING documentation generation and formatting (BUILD_DOC was not required and/or tools are missing)
make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc'
make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/share/zproject/zyre'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/include'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   src/libzyre.la '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib'
 /usr/bin/install -c -m 644 include/zyre.h include/zyre_event.h include/zyre_library.h '/home/buildroot/autobuild/instance-0/output-1/target/usr/include'
 /usr/bin/install -c -m 644 src/libzyre.pc '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 api/zyre.api api/zyre_event.api '/home/buildroot/autobuild/instance-0/output-1/target/usr/share/zproject/zyre'
libtool: install: /usr/bin/install -c src/.libs/libzyre.so.2.0.0 /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libzyre.so.2.0.0
libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libzyre.so.2.0.0 libzyre.so.2 || { rm -f libzyre.so.2 && ln -s libzyre.so.2.0.0 libzyre.so.2; }; })
libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libzyre.so.2.0.0 libzyre.so || { rm -f libzyre.so && ln -s libzyre.so.2.0.0 libzyre.so; }; })
libtool: install: /usr/bin/install -c src/.libs/libzyre.lai /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libzyre.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
 /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c src/zpinger '/home/buildroot/autobuild/instance-0/output-1/target/usr/bin'
libtool: install: /usr/bin/install -c src/zpinger /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/zpinger
make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0'
>>>   Finalizing host directory
>>>   Finalizing target directory
/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L  console 0 vt100 #~' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab
/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab
if grep -q CONFIG_ASH=y /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/instance-0/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/instance-0/output-1/target/etc/shells; fi
if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/instance-0/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/instance-0/output-1/target/etc/shells; fi
mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc
echo "buildroot" > /home/buildroot/autobuild/instance-0/output-1/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-0/output-1/target/etc/hosts
mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc
echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-0/output-1/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/instance-0/output-1/target/etc/shadow
rm -f /home/buildroot/autobuild/instance-0/output-1/target/bin/sh
if [ -x /home/buildroot/autobuild/instance-0/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/instance-0/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab; fi
printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/instance-0/output-1/build/locales.nopurge
for dir in /home/buildroot/autobuild/instance-0/output-1/target/usr/share/locale /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/instance-0/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/include /home/buildroot/autobuild/instance-0/output-1/target/usr/share/aclocal \
	/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-0/output-1/target/usr/share/pkgconfig \
	/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-0/output-1/target/usr/share/cmake \
	/home/buildroot/autobuild/instance-0/output-1/target/usr/doc
find /home/buildroot/autobuild/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/buildroot/autobuild/instance-0/output-1/target/lib/ /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-0/output-1/target/usr/libexec/ \
	\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
find: '/home/buildroot/autobuild/instance-0/output-1/target/usr/libexec/': No such file or directory
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/gdb
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/bash-completion
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/etc/bash_completion.d
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/zsh
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/man /home/buildroot/autobuild/instance-0/output-1/target/usr/share/man
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/info /home/buildroot/autobuild/instance-0/output-1/target/usr/share/info
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/doc /home/buildroot/autobuild/instance-0/output-1/target/usr/share/doc
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/gtk-doc
rmdir /home/buildroot/autobuild/instance-0/output-1/target/usr/share 2>/dev/null || true
rm -rf /home/buildroot/autobuild/instance-0/output-1/target/lib/debug /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/debug
find /home/buildroot/autobuild/instance-0/output-1/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/buildroot/autobuild/instance-0/output-1/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true
test -f /home/buildroot/autobuild/instance-0/output-1/target/etc/ld.so.conf && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/buildroot/autobuild/instance-0/output-1/target/etc/ld.so.conf.d && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc
( \
	echo "NAME=Buildroot"; \
	echo "VERSION=2019.05-7182-g09e5e3dbdd"; \
	echo "ID=buildroot"; \
	echo "VERSION_ID=2020.08-rc1"; \
	echo "PRETTY_NAME=\"Buildroot 2020.08-rc1\"" \
) >  /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-0/output-1/target/etc
>>>   Sanitizing RPATH in target tree
PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-0/output-1/per-package /home/buildroot/autobuild/instance-0/buildroot/support/scripts/fix-rpath target
cat /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/czmq-4.2.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/dropbear-2020.80/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/glm-0.9.9.5/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-autoconf-2.69/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-automake-1.15.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-binutils-2.33.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-cmake-3.15.5/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-final-9.3.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-initial-9.3.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext-tiny-0.3.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gmp-6.1.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libtool-2.4.6/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-m4-1.4.18/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpc-1.1.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpfr-4.0.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-ncurses-6.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-patchelf-0.9/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-pkgconf-1.6.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-skeleton/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/initscripts/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libebml-1.4.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libmatroska-1.6.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-1.1.1g/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libqrencode-4.0.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libtomcrypt-1.18.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libtommath-1.2.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libupnp-1.6.25/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/liburiparser-0.9.4/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libzlib-1.2.11/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/linux-headers-5.7.10/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-1.2.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-compat-headers/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/mutt-1.14.4/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/ncurses-6.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/openssl/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/popt-1.16/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/rsync-3.1.3/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-common/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-sysv/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-buildroot/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-totp-0.2.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-tss-2.3.3/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/util-linux-2.35.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/zeromq-4.3.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/zlib/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/.files-list.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list.txt
cat /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/czmq-4.2.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/dropbear-2020.80/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/glm-0.9.9.5/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-autoconf-2.69/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-automake-1.15.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-binutils-2.33.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-cmake-3.15.5/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-final-9.3.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-initial-9.3.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext-tiny-0.3.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gmp-6.1.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libtool-2.4.6/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-m4-1.4.18/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpc-1.1.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpfr-4.0.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-ncurses-6.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-patchelf-0.9/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-pkgconf-1.6.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-skeleton/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/initscripts/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libebml-1.4.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libmatroska-1.6.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-1.1.1g/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libqrencode-4.0.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libtomcrypt-1.18.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libtommath-1.2.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libupnp-1.6.25/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/liburiparser-0.9.4/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libzlib-1.2.11/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/linux-headers-5.7.10/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-1.2.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-compat-headers/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/mutt-1.14.4/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/ncurses-6.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/openssl/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/popt-1.16/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/rsync-3.1.3/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-common/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-sysv/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-buildroot/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-totp-0.2.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-tss-2.3.3/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/util-linux-2.35.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/zeromq-4.3.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/zlib/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/.files-list-host.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list-host.txt
cat /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/czmq-4.2.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/dropbear-2020.80/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/glm-0.9.9.5/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-autoconf-2.69/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-automake-1.15.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-binutils-2.33.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-cmake-3.15.5/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-final-9.3.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-initial-9.3.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext-tiny-0.3.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gmp-6.1.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libtool-2.4.6/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-m4-1.4.18/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpc-1.1.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpfr-4.0.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-ncurses-6.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-patchelf-0.9/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-pkgconf-1.6.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-skeleton/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/initscripts/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libebml-1.4.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libmatroska-1.6.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-1.1.1g/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libqrencode-4.0.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libtomcrypt-1.18.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libtommath-1.2.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libupnp-1.6.25/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/liburiparser-0.9.4/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libzlib-1.2.11/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/linux-headers-5.7.10/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-1.2.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-compat-headers/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/mutt-1.14.4/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/ncurses-6.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/openssl/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/popt-1.16/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/rsync-3.1.3/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-common/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-sysv/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-buildroot/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-totp-0.2.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-tss-2.3.3/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/util-linux-2.35.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/zeromq-4.3.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/zlib/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/.files-list-staging.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list-staging.txt
touch /home/buildroot/autobuild/instance-0/output-1/target/usr
ln -snf /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot /home/buildroot/autobuild/instance-0/output-1/staging
make: Leaving directory '/home/buildroot/autobuild/instance-0/buildroot'
make: Entering directory '/home/buildroot/autobuild/instance-0/buildroot'
>>>   Buildroot 2019.05-7182-g09e5e3dbdd Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-buildroot  Collecting legal info
>>> host-gcc-final 9.3.0 Collecting legal info
>>> host-binutils 2.33.1 Collecting legal info
COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d)
>>> host-skeleton  Collecting legal info
>>> host-gmp 6.1.2 Collecting legal info
COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c)
COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-mpc 1.1.0 Collecting legal info
COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768)
>>> host-mpfr 4.0.2 Collecting legal info
COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118)
>>> musl 1.2.0 Collecting legal info
COPYRIGHT: OK (sha256: afe1df384787fce3577f3356b8b0d417381483f7c704eacb63f8050349fac77a)
>>> host-gcc-initial 9.3.0 Collecting legal info
>>> linux-headers 5.7.10 Collecting legal info
>>> skeleton  Collecting legal info
>>> skeleton-init-sysv  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> musl-compat-headers  Collecting legal info
>>> toolchain  Collecting legal info
>>> busybox 1.31.1 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
>>> util-linux 2.35.2 Collecting legal info
README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955)
Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-pkgconf 1.6.1 Collecting legal info
COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04)
>>> ncurses 6.1 Collecting legal info
COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87)
>>> host-ncurses 6.1 Collecting legal info
COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87)
>>> zlib  Collecting legal info
>>> libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> czmq 4.2.0 Collecting legal info
LICENSE: OK (sha256: 1f256ecad192880510e84ad60474eab7589218784b9a50bc7ceee34c2b91f1d5)
>>> zeromq 4.3.2 Collecting legal info
COPYING: OK (sha256: 4fd86507c9b486764343065a9e035222869a27b5789efeb4fd93edc85412d7a3)
COPYING.LESSER: OK (sha256: 83f32abe61ee58ffb1b007412c08415168c052501dbf56d7a47aaaac52b03ef6)
>>> host-autoconf 2.69 Collecting legal info
COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2)
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> dropbear 2020.80 Collecting legal info
LICENSE: OK (sha256: a99ce657d790b761c132ee7e0de18edb437ae6361e536d991c6a12f36e770445)
>>> libtomcrypt 1.18.2 Collecting legal info
LICENSE: OK (sha256: 8f196cb13afd271f5e267fd29543fc454596382ad580e7592709492843996ac8)
>>> libtommath 1.2.0 Collecting legal info
LICENSE: OK (sha256: 2fa64b163659f41965c9815882a8296d3d03ff546b76153e11445f9bdecf955a)
>>> glm 0.9.9.5 Collecting legal info
manual.md: OK (sha256: 337130631a714eeae017556cad101d5324c2961214120b6214741d3d43667086)
>>> host-cmake 3.15.5 Collecting legal info
Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9)
>>> initscripts  Collecting legal info
>>> libebml 1.4.0 Collecting legal info
LICENSE.LGPL: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> libmatroska 1.6.0 Collecting legal info
LICENSE.LGPL: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> libopenssl 1.1.1g Collecting legal info
LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c)
>>> libqrencode 4.0.2 Collecting legal info
COPYING: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861)
>>> libupnp 1.6.25 Collecting legal info
LICENSE: OK (sha256: 0375955c8a79d6e8fa0792d45d00fc4e7710d7ac95bcbd27f9225a83f5c946fd)
>>> liburiparser 0.9.4 Collecting legal info
COPYING: OK (sha256: 287f09e6546a9610f949f89e8fb937cacfeabd7bfaa8c8a0c18312193bf04ad3)
>>> mutt 1.14.4 Collecting legal info
GPL: OK (sha256: 732f24b69a6c71cd8e01e4672bb8e12cc1cbb88a50a4665e6ca4fd95000a57ee)
>>> openssl  Collecting legal info
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> popt 1.16 Collecting legal info
COPYING: OK (sha256: 518d4f2a05064cb9a8ec0ea02e86408af4feed6916f78ef42171465db8b383c5)
>>> host-gettext  Collecting legal info
>>> host-gettext-tiny 0.3.2 Collecting legal info
LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f)
extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b)
>>> rsync 3.1.3 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> tpm2-totp 0.2.1 Collecting legal info
LICENSE: OK (sha256: 67bc21a0bff2b0890307cfaa883bd3f5337f461eb6d8a612a015cea6d704e9ed)
>>> tpm2-tss 2.3.3 Collecting legal info
LICENSE: OK (sha256: 18c1bf4b1ba1fb2c4ffa7398c234d83c0d55475298e470ae1e5e3a8a8bd2e448)
>>> zyre 2.0.0 Collecting legal info
LICENSE: OK (sha256: 1f256ecad192880510e84ad60474eab7589218784b9a50bc7ceee34c2b91f1d5)
WARNING: the Buildroot source code has not been saved
WARNING: gcc-final-9.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined)
WARNING: gcc-initial-9.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined)
WARNING: linux-headers-5.7.10: cannot save license (LINUX_HEADERS_LICENSE_FILES not defined)
Legal info produced in /home/buildroot/autobuild/instance-0/output-1/legal-info
make: Leaving directory '/home/buildroot/autobuild/instance-0/buildroot'