/bin/bash ../libtool   --mode=install /usr/bin/install -c   libsgutils2.la '/home/buildroot/autobuild/instance-2/output-1/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libsgutils2-1.45.so.2.0.0 /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/libsgutils2-1.45.so.2.0.0
libtool: install: (cd /home/buildroot/autobuild/instance-2/output-1/target/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2 || { rm -f libsgutils2-1.45.so.2 && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2; }; })
libtool: install: (cd /home/buildroot/autobuild/instance-2/output-1/target/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2.so; }; })
libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/libsgutils2.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/lib'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/lib'
Making install in src
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/src'
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/src'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/autobuild/instance-2/output-1/target/usr/bin'
libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_bg_ctl
libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_compare_and_write
libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_decode_sense
libtool: install: /usr/bin/install -c sg_format /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_format
libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_get_config
libtool: install: /usr/bin/install -c sg_get_elem_status /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_get_elem_status
libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_get_lba_status
libtool: install: /usr/bin/install -c sg_ident /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_ident
libtool: install: /usr/bin/install -c sg_inq /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_inq
libtool: install: /usr/bin/install -c sg_logs /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_logs
libtool: install: /usr/bin/install -c sg_luns /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_luns
libtool: install: /usr/bin/install -c sg_modes /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_modes
libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_opcodes
libtool: install: /usr/bin/install -c sg_persist /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_persist
libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_prevent
libtool: install: /usr/bin/install -c sg_raw /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_raw
libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_rdac
libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_read_attr
libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_read_block_limits
libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_read_buffer
libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_read_long
libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_readcap
libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_reassign
libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_referrals
libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_rep_zones
libtool: install: /usr/bin/install -c sg_requests /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_requests
libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_reset_wp
libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_rmsn
libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_rtpg
libtool: install: /usr/bin/install -c sg_safte /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_safte
libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_sanitize
libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_sat_identify
libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_sat_phy_event
libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_sat_read_gplog
libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_sat_set_features
libtool: install: /usr/bin/install -c sg_seek /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_seek
libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_senddiag
libtool: install: /usr/bin/install -c sg_ses /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_ses
libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_ses_microcode
libtool: install: /usr/bin/install -c sg_start /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_start
libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_stpg
libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_stream_ctl
libtool: install: /usr/bin/install -c sg_sync /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_sync
libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_timestamp
libtool: install: /usr/bin/install -c sg_turs /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_turs
libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_unmap
libtool: install: /usr/bin/install -c sg_verify /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_verify
libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_vpd
libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_wr_mode
libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_write_buffer
libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_write_long
libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_write_same
libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_write_verify
libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_write_x
libtool: install: /usr/bin/install -c sg_zone /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_zone
libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_copy_results
libtool: install: /usr/bin/install -c sg_dd /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_dd
libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_emc_trespass
libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_map
libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_map26
libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_rbuf
libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_read
libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_reset
libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_scan
libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_test_rwbuf
libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_xcopy
libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sginfo
libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sgm_dd
libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sgp_dd
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/src'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/src'
Making install in doc
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/doc'
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/doc'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man8'
 /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man8'
 /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man8'
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/doc'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/doc'
Making install in scripts
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/scripts'
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/scripts'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/bin'
 /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/instance-2/output-1/target/usr/bin'
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/scripts'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45/scripts'
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45'
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45'
make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/sg3_utils-1.45'
for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/sg_${prog} ; done
for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/scsi_${prog} ; done
for prog in sginfo sgm_dd sgp_dd; do rm -f /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/${prog}; done
spawn-fcgi-1.6.4.tar.bz2: OK (sha256: a3cfc7c9581b6ddc31084b379c9160323fa345d357ace6cd2d3d3af3593e2873)
>>> spawn-fcgi 1.6.4 Extracting
bzcat /home/buildroot/autobuild/instance-2/dl/spawn-fcgi/spawn-fcgi-1.6.4.tar.bz2 | tar --strip-components=1 -C /home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4   -xf -
>>> spawn-fcgi 1.6.4 Patching
>>> spawn-fcgi 1.6.4 Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4 -name $file); do cp support/gnuconfig/$file $i; done; done
>>> spawn-fcgi 1.6.4 Patching libtool
>>> spawn-fcgi 1.6.4 Configuring
(cd /home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ar" AS="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-as" LD="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ld" NM="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-nm" CC="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc" GCC="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc" CPP="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-cpp" CXX="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-g++" FC="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gfortran" F77="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gfortran" RANLIB="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ranlib" READELF="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-readelf" STRIP="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip" OBJCOPY="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -O2  " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -O2  " LDFLAGS="" FCFLAGS=" -O2 " FFLAGS=" -O2 " PKG_CONFIG="/home/buildroot/autobuild/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-gnueabihf/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no   CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-gnueabihf --host=arm-buildroot-linux-gnueabihf --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --enable-nls --disable-static --enable-shared   )
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-nls, --disable-static, --enable-shared
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for arm-buildroot-linux-gnueabihf-strip... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for arm-buildroot-linux-gnueabihf-gcc... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc accepts -g... yes
checking for /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc option to accept ISO C89... none needed
checking whether /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc... none
checking whether make sets $(MAKE)... (cached) yes
checking how to run the C preprocessor... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-cpp
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking grp.h usability... yes
checking grp.h presence... yes
checking for grp.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking pwd.h usability... yes
checking pwd.h presence... yes
checking for pwd.h... yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for sys/stat.h... (cached) yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for sys/types.h... (cached) yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking for sys/wait.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for uid_t in sys/types.h... yes
checking for pid_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for socklen_t... yes
checking for library containing socket... none required
checking for library containing inet_addr... none required
checking for unistd.h... (cached) yes
checking for working chown... no
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... cross
configure: WARNING: result yes guessed because of cross compilation
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... (cached) yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking for sys/socket.h... (cached) yes
checking types of arguments for select... int,fd_set *,struct timeval *
checking whether lstat correctly handles trailing slash... no
checking whether stat accepts an empty string... yes
checking for dup2... yes
checking for memset... yes
checking for putenv... yes
checking for select... yes
checking for socket... yes
checking for strerror... yes
checking for strtol... yes
checking for issetugid... no
checking for inet_pton... yes
checking for IPv6 support... no
checking if /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc supports -Wall -W -Wshadow -pedantic... yes
checking if /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc supports -std=gnu99... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating config.h
config.status: executing depfiles commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-nls, --disable-static, --enable-shared
>>> spawn-fcgi 1.6.4 Building
PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"  /usr/bin/make -j4  -C /home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/
make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
/usr/bin/make  all-recursive
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
Making all in src
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/src'
/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc -DHAVE_CONFIG_H -I. -I..   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -O2   -Wall -W -Wshadow -pedantic -std=gnu99 -c -o spawn-fcgi.o spawn-fcgi.c
/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -O2   -Wall -W -Wshadow -pedantic -std=gnu99   -o spawn-fcgi spawn-fcgi.o  
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/src'
Making all in doc
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/doc'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/doc'
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
>>> spawn-fcgi 1.6.4 Installing to target
PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"  /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-2/output-1/target install -C /home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/
make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
Making install in src
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/src'
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/src'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/bin'
  /usr/bin/install -c spawn-fcgi '/home/buildroot/autobuild/instance-2/output-1/target/usr/bin'
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/src'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/src'
Making install in doc
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/doc'
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/doc'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/doc'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4/doc'
make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man1'
 /usr/bin/install -c -m 644 spawn-fcgi.1 '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man1'
make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/spawn-fcgi-1.6.4'
ux500-firmware_1.1.3-6linaro1.tar.gz: OK (sha256: 81633274a9157c076e5e09b5addd81fbcef504b829fc801041cea50eea774bcd)
>>> ux500-firmware 1.1.3-6 Extracting
gzip -d -c /home/buildroot/autobuild/instance-2/dl/ux500-firmware/ux500-firmware_1.1.3-6linaro1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-2/output-1/build/ux500-firmware-1.1.3-6   -xf -
>>> ux500-firmware 1.1.3-6 Patching
>>> ux500-firmware 1.1.3-6 Configuring
>>> ux500-firmware 1.1.3-6 Building
>>> ux500-firmware 1.1.3-6 Installing to target
PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-2/output-1/build/ux500-firmware-1.1.3-6 DESTDIR=/home/buildroot/autobuild/instance-2/output-1/target install
make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/ux500-firmware-1.1.3-6'
install -d /home/buildroot/autobuild/instance-2/output-1/target/lib/firmware/cw1200
install -m 0666 *.bin *.fw /home/buildroot/autobuild/instance-2/output-1/target/lib/firmware
install -m 0666 cw1200/*.bin /home/buildroot/autobuild/instance-2/output-1/target/lib/firmware/cw1200
make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/ux500-firmware-1.1.3-6'
for f in /home/buildroot/autobuild/instance-2/output-1/target/lib/firmware/CG2900* ; do mv $f ${f/CG2900/CG29XX}; done
>>>   Finalizing host directory
>>>   Finalizing target directory
mkdir -p /home/buildroot/autobuild/instance-2/output-1/host/etc/meson
sed -e 's%@TARGET_CROSS@%/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-%g' -e 's%@TARGET_ARCH@%arm%g' -e 's%@TARGET_CPU@%cortex-a9%g' -e 's%@TARGET_ENDIAN@%little%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/home/buildroot/autobuild/instance-2/output-1/host%g' -e 's%@STAGING_DIR@%/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-gnueabihf/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/instance-2/output-1/host/etc/meson/cross-compilation.conf.in
sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/buildroot/autobuild/instance-2/output-1/host/etc/meson/cross-compilation.conf.in > /home/buildroot/autobuild/instance-2/output-1/host/etc/meson/cross-compilation.conf
/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L  console 0 vt100 #~' /home/buildroot/autobuild/instance-2/output-1/target/etc/inittab
/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/instance-2/output-1/target/etc/inittab
if grep -q CONFIG_ASH=y /home/buildroot/autobuild/instance-2/output-1/build/busybox-1.32.0/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/instance-2/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/instance-2/output-1/target/etc/shells; fi
if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/instance-2/output-1/build/busybox-1.32.0/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/instance-2/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/instance-2/output-1/target/etc/shells; fi
mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc
echo "buildroot" > /home/buildroot/autobuild/instance-2/output-1/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-2/output-1/target/etc/hosts
mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc
echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-2/output-1/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/instance-2/output-1/target/etc/shadow
rm -f /home/buildroot/autobuild/instance-2/output-1/target/bin/sh
if [ -x /home/buildroot/autobuild/instance-2/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/instance-2/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/instance-2/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/instance-2/output-1/target/etc/inittab; fi
printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/instance-2/output-1/build/locales.nopurge
for dir in /home/buildroot/autobuild/instance-2/output-1/target/usr/share/locale /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/instance-2/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/include /home/buildroot/autobuild/instance-2/output-1/target/usr/share/aclocal \
	/home/buildroot/autobuild/instance-2/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-2/output-1/target/usr/share/pkgconfig \
	/home/buildroot/autobuild/instance-2/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-2/output-1/target/usr/share/cmake \
	/home/buildroot/autobuild/instance-2/output-1/target/usr/doc
find /home/buildroot/autobuild/instance-2/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/buildroot/autobuild/instance-2/output-1/target/lib/ /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-2/output-1/target/usr/libexec/ \
	\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
find: '/home/buildroot/autobuild/instance-2/output-1/target/usr/libexec/': No such file or directory
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/gdb
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/bash-completion
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/etc/bash_completion.d
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/zsh
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/man /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/info /home/buildroot/autobuild/instance-2/output-1/target/usr/share/info
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/doc /home/buildroot/autobuild/instance-2/output-1/target/usr/share/doc
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/gtk-doc
rmdir /home/buildroot/autobuild/instance-2/output-1/target/usr/share 2>/dev/null || true
rm -rf /home/buildroot/autobuild/instance-2/output-1/target/lib/debug /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/debug
find /home/buildroot/autobuild/instance-2/output-1/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/buildroot/autobuild/instance-2/output-1/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true
test -f /home/buildroot/autobuild/instance-2/output-1/target/etc/ld.so.conf && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/buildroot/autobuild/instance-2/output-1/target/etc/ld.so.conf.d && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc
( \
	echo "NAME=Buildroot"; \
	echo "VERSION=2019.08-rc1-7664-g6eff339082d"; \
	echo "ID=buildroot"; \
	echo "VERSION_ID=2021.02-git"; \
	echo "PRETTY_NAME=\"Buildroot 2021.02-git\"" \
) >  /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-2/output-1/target/etc
>>>   Sanitizing RPATH in target tree
PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-2/output-1/per-package /home/buildroot/autobuild/instance-2/buildroot/support/scripts/fix-rpath target
touch /home/buildroot/autobuild/instance-2/output-1/target/usr
ln -snf /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-gnueabihf/sysroot /home/buildroot/autobuild/instance-2/output-1/staging
make: Leaving directory '/home/buildroot/autobuild/instance-2/buildroot'
make: Entering directory '/home/buildroot/autobuild/instance-2/buildroot'
>>>   Buildroot 2019.08-rc1-7664-g6eff339082d Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-external  Collecting legal info
>>> host-skeleton  Collecting legal info
>>> skeleton  Collecting legal info
>>> skeleton-init-sysv  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> toolchain-external-custom  Collecting legal info
>>> toolchain  Collecting legal info
>>> 18xx-ti-utils 8.8 Collecting legal info
COPYING: OK (sha256: 363cef40b276a7a91ebcff3f78626d9cfe5e5a51927c725236007259403d5fc4)
>>> libnl 3.5.0 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-bison 3.7.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-flex 2.6.4 Collecting legal info
COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273)
>>> host-autoconf 2.69 Collecting legal info
COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2)
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> host-gettext  Collecting legal info
>>> host-gettext-gnu 0.20.1 Collecting legal info
COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b)
gettext-runtime/intl/COPYING.LIB: OK (sha256: 3fe5361f24b7c49ba12911c08f5a33f9cb18871d95d9fb881f5b8a4793e04288)
>>> host-libtextstyle 0.20.1 Collecting legal info
COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b)
>>> host-libxml2 2.9.10 Collecting legal info
COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd)
>>> host-pkgconf 1.6.1 Collecting legal info
COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04)
>>> bctoolbox 4.3.1 Collecting legal info
COPYING: OK (sha256: 849dd903d98f12a964466ccfbaf3a1de1f94ad0ebd49a59d12f8ce4506f9f647)
>>> host-cmake 3.15.5 Collecting legal info
Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9)
>>> mbedtls 2.16.8 Collecting legal info
apache-2.0.txt: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30)
>>> botan 2.17.0 Collecting legal info
license.txt: OK (sha256: fb7f0322d36fba55ca17d77bc203a9f09a40daa8a249b75cf8887aba36cec9d0)
>>> bzip2 1.0.8 Collecting legal info
LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3)
>>> xz 5.2.5 Collecting legal info
COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c)
COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> zlib  Collecting legal info
>>> libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> busybox 1.32.0 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f)
>>> ntp 4.2.8p15 Collecting legal info
COPYRIGHT: OK (sha256: 957e6a13445cc61ab1ca3dc80d8c269cf9b0a6d9eaec20f9f39639b0b3e66ee8)
>>> libevent 2.1.12 Collecting legal info
LICENSE: OK (sha256: ff02effc9b331edcdac387d198691bfa3e575e7d244ad10cb826aa51ef085670)
>>> caps 0.9.26 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> cpuload 0.3 Collecting legal info
COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670)
>>> ficl 4.1.0 Collecting legal info
ReadMe.txt: OK (sha256: 1d1dd1f1cde52e8b607c5ccb6a2e5de878fd1719b8c5a4d31b9cdb343c203d0d)
>>> flatcc 0.6.0 Collecting legal info
LICENSE: OK (sha256: c8f0d9c1f92c658d87ebd854ee7447a3d3912d2c3a5c78c117787be5d5da8af3)
>>> host-flatcc 0.6.0 Collecting legal info
LICENSE: OK (sha256: c8f0d9c1f92c658d87ebd854ee7447a3d3912d2c3a5c78c117787be5d5da8af3)
>>> initscripts  Collecting legal info
>>> libcurl 7.73.0 Collecting legal info
COPYING: OK (sha256: db3c4a3b3695a0f317a0c5176acd2f656d18abc45b3ee78e50935a78eb1e132e)
>>> libgta 1.0.8 Collecting legal info
COPYING: OK (sha256: 36b6d3fa47916943fd5fec313c584784946047ec1337a78b440e5992cb595f89)
>>> libmnl 1.0.4 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> libnetfilter_queue 1.0.5 Collecting legal info
COPYING: OK (sha256: 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad)
>>> libnfnetlink 1.0.1 Collecting legal info
COPYING: OK (sha256: 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad)
>>> mediastreamer 4.3.1 Collecting legal info
LICENSE.txt: OK (sha256: 1b3782ccad7b8614100cda30d3faf42fc39f2e97932908c543005053b654ca68)
>>> ortp 4.3.1 Collecting legal info
LICENSE.txt: OK (sha256: 1b3782ccad7b8614100cda30d3faf42fc39f2e97932908c543005053b654ca68)
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-qemu 5.1.0 Collecting legal info
COPYING: OK (sha256: 6f04ae8364d0079a192b14635f4b1da294ce18724c034c39a6a41d1b09df6100)
COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-libglib2 2.64.4 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-libffi 3.3 Collecting legal info
LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0)
>>> host-meson 0.55.3 Collecting legal info
COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30)
>>> host-ninja 1.10.0 Collecting legal info
COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea)
>>> host-python3 3.9.0 Collecting legal info
LICENSE: OK (sha256: 1dceef1677a39befa8bf0285ab2db441ba117520bb2de839547ace006a17750d)
>>> host-expat 2.2.10 Collecting legal info
COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec)
>>> host-zlib  Collecting legal info
>>> host-libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> host-python3-setuptools 44.0.0 Collecting legal info
LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a)
>>> host-pcre 8.44 Collecting legal info
LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3)
>>> host-util-linux 2.36 Collecting legal info
README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955)
Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-pixman 0.40.0 Collecting legal info
COPYING: OK (sha256: fac9270f0987b96ff4533fca3548c633e02083cbba4a0172a3b149b2e4019793)
>>> sane-backends 1.0.27 Collecting legal info
COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa)
>>> sg3_utils 1.45 Collecting legal info
COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc)
BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a)
>>> spawn-fcgi 1.6.4 Collecting legal info
COPYING: OK (sha256: 5c98cad2fbaf5c5e2562bcbab401a7c557c1bb1bac9914ecc63730925052fb13)
>>> ux500-firmware 1.1.3-6 Collecting legal info
license.txt: OK (sha256: b5bbc3fb3ff2f8e165b3bf60b25702d8970b3d7fe88b1c883f20615d550a7cb2)
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined)
Legal info produced in /home/buildroot/autobuild/instance-2/output-1/legal-info
make: Leaving directory '/home/buildroot/autobuild/instance-2/buildroot'