>>> ntp 4.2.8p18 Extracting gzip -d -c /home/buildroot/instance-0/dl/ntp/ntp-4.2.8p18.tar.gz | /home/buildroot/instance-0/output-1/host/bin/tar --strip-components=1 -C /home/buildroot/instance-0/output-1/build/ntp-4.2.8p18 -xf - >>> ntp 4.2.8p18 Patching Applying 0001-ntp-syscalls-fallback.patch using patch: patching file configure.ac Applying 0002-fix-pthread-detach-check.patch using patch: patching file sntp/m4/openldap-thread-check.m4 Applying 0003-fix-md5update.patch using patch: patching file include/ntp_md5.h patching file libntp/a_md5encrypt.c patching file libntp/authreadkeys.c patching file ntpd/ntp_control.c patching file ntpd/ntp_crypto.c Applying 0004-Fix-crash-when-binding-IPv6-address.patch using patch: patching file ntpd/ntp_io.c >>> ntp 4.2.8p18 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/instance-0/output-1/build/ntp-4.2.8p18 -name $file); do cp support/gnuconfig/$file $i; done; done >>> ntp 4.2.8p18 Configuring >>> ntp 4.2.8p18 Autoreconfiguring libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:46: warning: The macro 'AC_PROG_GCC_TRADITIONAL' is obsolete. configure.ac:46: You should run autoupdate. ./lib/autoconf/c.m4:1676: AC_PROG_GCC_TRADITIONAL is expanded from... configure.ac:46: the top level configure.ac:357: warning: The macro 'AC_HEADER_TIME' is obsolete. configure.ac:357: You should run autoupdate. ./lib/autoconf/headers.m4:702: AC_HEADER_TIME is expanded from... configure.ac:357: the top level configure.ac:805: warning: The macro 'AC_TRY_LINK' is obsolete. configure.ac:805: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... m4/acx_pthread.m4:86: ACX_PTHREAD is expanded from... configure.ac:805: the top level configure.ac:1012: warning: AC_OUTPUT should be used without arguments. configure.ac:1012: You should run autoupdate. configure.ac:24: installing 'build-aux/compile' configure.ac:14: installing 'build-aux/missing' Makefile.am: installing 'build-aux/depcomp' libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'libevent/build-aux'. libtoolize: copying file 'libevent/build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:52: warning: The macro 'AC_CONFIG_HEADER' is obsolete. configure.ac:52: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.ac:52: the top level configure.ac:56: warning: The macro 'AC_PROG_CC_STDC' is obsolete. configure.ac:56: You should run autoupdate. ./lib/autoconf/c.m4:1669: AC_PROG_CC_STDC is expanded from... m4/ntp_compiler.m4:3: NTP_COMPILER is expanded from... configure.ac:56: the top level configure.ac:63: warning: The macro 'AC_TRY_LINK' is obsolete. configure.ac:63: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... ./lib/autoconf/general.m4:2979: AC_RUN_IFELSE is expanded from... lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... ./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... m4/openldap-thread-check.m4:23: OL_THREAD_CHECK is expanded from... m4/ntp_libntp.m4:9: NTP_LIBNTP is expanded from... configure.ac:63: the top level configure.ac:94: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:94: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... libopts/m4/libopts.m4:4: INVOKE_LIBOPTS_MACROS_FIRST is expanded from... libopts/m4/libopts.m4:475: LIBOPTS_CHECK_COMMON is expanded from... libopts/m4/libopts.m4:575: LIBOPTS_CHECK is expanded from... configure.ac:94: the top level configure.ac:94: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:94: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... libopts/m4/libopts.m4:475: LIBOPTS_CHECK_COMMON is expanded from... libopts/m4/libopts.m4:575: LIBOPTS_CHECK is expanded from... configure.ac:94: the top level configure.ac:103: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:103: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... m4/ntp_libevent.m4:31: NTP_ENABLE_LOCAL_LIBEVENT is expanded from... m4/ntp_libevent.m4:60: NTP_LIBEVENT_CHECK_NOBUILD is expanded from... m4/ntp_libevent.m4:164: NTP_LIBEVENT_CHECK is expanded from... configure.ac:103: the top level configure.ac:55: installing 'libevent/build-aux/compile' configure.ac:43: installing 'libevent/build-aux/missing' Makefile.am: installing 'libevent/build-aux/depcomp' libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'sntp/libevent/build-aux'. libtoolize: copying file 'sntp/libevent/build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'sntp/m4'. libtoolize: copying file 'sntp/m4/libtool.m4' libtoolize: copying file 'sntp/m4/ltoptions.m4' libtoolize: copying file 'sntp/m4/ltsugar.m4' libtoolize: copying file 'sntp/m4/ltversion.m4' libtoolize: copying file 'sntp/m4/lt~obsolete.m4' configure.ac:82: warning: The macro 'AC_PROG_CC_STDC' is obsolete. configure.ac:82: You should run autoupdate. ./lib/autoconf/c.m4:1669: AC_PROG_CC_STDC is expanded from... sntp/m4/ntp_compiler.m4:3: NTP_COMPILER is expanded from... configure.ac:82: the top level configure.ac:86: warning: The macro 'AC_PROG_CC_C99' is obsolete. configure.ac:86: You should run autoupdate. ./lib/autoconf/c.m4:1662: AC_PROG_CC_C99 is expanded from... sntp/m4/ax_c99_struct_init.m4:40: AX_C99_STRUCT_INIT is expanded from... configure.ac:86: the top level configure.ac:116: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:116: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... sntp/libopts/m4/libopts.m4:4: INVOKE_LIBOPTS_MACROS_FIRST is expanded from... sntp/libopts/m4/libopts.m4:475: LIBOPTS_CHECK_COMMON is expanded from... sntp/libopts/m4/libopts.m4:566: LIBOPTS_CHECK_NOBUILD is expanded from... configure.ac:116: the top level configure.ac:116: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:116: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... sntp/libopts/m4/libopts.m4:475: LIBOPTS_CHECK_COMMON is expanded from... sntp/libopts/m4/libopts.m4:566: LIBOPTS_CHECK_NOBUILD is expanded from... configure.ac:116: the top level configure.ac:118: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:118: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... sntp/m4/ntp_libevent.m4:31: NTP_ENABLE_LOCAL_LIBEVENT is expanded from... sntp/m4/ntp_libevent.m4:60: NTP_LIBEVENT_CHECK_NOBUILD is expanded from... configure.ac:118: the top level configure.ac:120: warning: The macro 'AC_TRY_LINK' is obsolete. configure.ac:120: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... ./lib/autoconf/general.m4:2979: AC_RUN_IFELSE is expanded from... lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... ./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... sntp/m4/openldap-thread-check.m4:23: OL_THREAD_CHECK is expanded from... sntp/m4/ntp_libntp.m4:9: NTP_LIBNTP is expanded from... configure.ac:120: the top level configure.ac:219: warning: The macro 'AC_TRY_RUN' is obsolete. configure.ac:219: You should run autoupdate. ./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from... configure.ac:219: the top level configure.ac:525: warning: The macro 'AC_TYPE_SIGNAL' is obsolete. configure.ac:525: You should run autoupdate. ./lib/autoconf/types.m4:805: AC_TYPE_SIGNAL is expanded from... configure.ac:525: the top level configure.ac:2979: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:2979: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:2979: the top level configure.ac:81: installing 'sntp/libevent/build-aux/compile' configure.ac:45: installing 'sntp/libevent/build-aux/missing' adjtimed/Makefile.am: installing 'sntp/libevent/build-aux/depcomp' >>> ntp 4.2.8p18 Patching libtool patching file /home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/sntp/libevent/build-aux/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). patching file /home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/sntp/libevent/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). (cd /home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/ && rm -rf config.cache && GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar" AS="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-as" LD="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld" NM="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-nm" CC="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc" GCC="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc" CPP="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-cpp" CXX="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-g++" FC="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gfortran" F77="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gfortran" RANLIB="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ranlib" READELF="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/home/buildroot/instance-0/output-1/host/bin/ccache /usr/bin/gcc" GCC_FOR_BUILD="/home/buildroot/instance-0/output-1/host/bin/ccache /usr/bin/gcc" CXX_FOR_BUILD="/home/buildroot/instance-0/output-1/host/bin/ccache /usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g3 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g3 " LDFLAGS="" FCFLAGS=" -O2 -g3" FFLAGS=" -O2 -g3" PKG_CONFIG="/home/buildroot/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/instance-0/output-1/host/mips-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes ac_cv_lib_md5_MD5Init=no POSIX_SHELL=/bin/sh CONFIG_SITE=/dev/null ./configure --target=mips-buildroot-linux-uclibc --host=mips-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-shared --program-transform-name=s,,, --disable-tickadj --disable-debugging --with-yielding-select=yes --disable-local-libevent --with-crypto --enable-openssl-random --with-hardenfile=default --enable-linuxcaps --without-lineeditlibs --without-ntpsnmpd --disable-ATOM --disable-SHM --without-sntp ) checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for mips-buildroot-linux-uclibc-strip... /bin/true checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... mips-buildroot-linux-uclibc checking if we should enable build framework help... yes checking whether make supports the include directive... yes (GNU style) checking for mips-buildroot-linux-uclibc-cc... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc accepts -g... yes checking for /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc option to enable C11 features... none needed checking whether /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc understands -c and -o together... yes checking dependency style of /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking for vfork.h... no checking for stdarg.h... yes checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle #warning... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports __attribute__((...))... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle -Wstrict-overflow... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle -Winit-self... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle -Wno-format -Wno-format-security... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle -Wformat -Wno-format-truncation... yes checking if linker supports omitting unused code and data... no checking additional compiler flags... none needed checking additional linker flags... none needed checking whether byte ordering is bigendian... (cached) yes checking for working volatile... yes checking how to run the C preprocessor... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-cpp checking for bison... bison -y checking whether the compiler supports C99 structure initialization... yes checking for compile/link hardening flags... in file harden/default checking to see if we need ylwrap VPATH hack... no checking for install dir and man conventions... in file loc/debian checking for mips-buildroot-linux-uclibc-ar... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar checking the archiver (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar) interface... ar checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld checking if the linker (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-nm checking the name lister (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to mips-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld option to reload object files... -r checking for mips-buildroot-linux-uclibc-objdump... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-objdump checking how to recognize dependent libraries... pass_all checking for mips-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for mips-buildroot-linux-uclibc-ar... (cached) /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar checking for archiver @FILE support... @ checking for mips-buildroot-linux-uclibc-strip... (cached) /bin/true checking for mips-buildroot-linux-uclibc-ranlib... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ranlib checking command to parse /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-nm output from /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mips-buildroot-linux-uclibc-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc static flag -static works... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports -c -o file.o... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc linker (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for egrep... (cached) /bin/grep -E checking for vprintf... yes checking for fork... yes checking for vfork... yes checking for pid_t... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for sys/mman.h... yes checking for sys/param.h... yes checking for sys/poll.h... yes checking for sys/procset.h... no checking for sys/select.h... yes checking for sys/socket.h... yes checking for sys/stropts.h... no checking for sys/time.h... yes checking for sys/un.h... yes checking for sys/wait.h... yes checking for dlfcn.h... (cached) yes checking for errno.h... yes checking for fcntl.h... yes checking for libgen.h... yes checking for libintl.h... yes checking for memory.h... yes checking for netinet/in.h... yes checking for setjmp.h... yes checking for stdbool.h... yes checking for sysexits.h... yes checking for unistd.h... (cached) yes checking for utime.h... yes checking for stdarg.h... (cached) yes checking for string.h... (cached) yes checking for limits.h... yes checking for inttypes.h... (cached) yes checking for working stdnoreturn.h... yes checking for runetype.h... no checking for wchar.h... (cached) yes checking for wchar_t... yes checking for wint_t... yes checking for int8_t... yes checking for uint8_t... yes checking for int16_t... yes checking for uint16_t... yes checking for int32_t... yes checking for uint32_t... yes checking for intptr_t... yes checking for uintptr_t... yes checking for uint_t... no checking for pid_t... (cached) yes checking for size_t... yes checking for ptrdiff_t... yes checking size of char *... 4 checking size of int... 4 checking size of long... 4 checking size of short... 2 checking for pathfind in -lgen... no checking for gettext in -lintl... yes checking for working fork... cross configure: WARNING: result yes guessed because of cross compilation checking for working vfork... (cached) yes checking for mmap... yes checking for canonicalize_file_name... yes checking for snprintf... yes checking for strdup... yes checking for strchr... yes checking for strrchr... yes checking for strsignal... yes checking for fchmod... yes checking for fstat... yes checking for chmod... yes checking for a sed that does not truncate output... (cached) /bin/sed configure: Using supplied libopts tearoff checking for mips-buildroot-linux-uclibc-pkg-config... /home/buildroot/instance-0/output-1/host/bin/pkg-config checking if pkg-config is at least version 0.15.0... yes checking if libevent 2 or later is installed... yes, version 2.1.12-stable checking for size_t... (cached) yes checking for /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc options needed to detect all undeclared functions... none needed checking whether strerror_r is declared... yes checking for egrep -e... (cached) /bin/grep -E checking for unsigned long long int... yes checking for vsnprintf... yes checking whether vsnprintf is C99 compliant... no checking if C99-snprintf replacement vsnprintf will be used... yes checking for inttypes.h... (cached) yes checking for locale.h... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for struct lconv.decimal_point... yes checking for struct lconv.thousands_sep... yes checking for long double... yes checking for long long int... yes checking for unsigned long long int... (cached) yes checking for size_t... (cached) yes checking for intmax_t... yes checking for uintmax_t... yes checking for uintptr_t... (cached) yes checking for ptrdiff_t... (cached) yes checking for localeconv... yes checking for an ANSI C-conforming const... yes checking for snprintf... (cached) yes checking whether snprintf is C99 compliant... no checking if C99-snprintf replacement snprintf will be used... yes checking for ld used by /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc... (cached) /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld checking if the linker (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld) is GNU ld... (cached) yes checking for directory path separator... '/' checking line editing libraries... no checking for library containing cos... none required checking for working fork... (cached) yes checking for working vfork... (cached) yes checking for working alloca.h... yes checking for alloca... yes checking whether strerror_r returns char *... yes checking for library containing clock_gettime... none required checking for clock_getres... yes checking for clock_gettime... yes checking for clock_settime... yes checking for getclock... no checking for stime... yes checking for timegm... yes checking for strlcpy... yes checking for strlcat... yes checking for library containing snprintb... no checking for errno.h... (cached) yes checking for sys/socket.h... (cached) yes checking for sys/types.h... (cached) yes checking for time.h... yes checking for net/if.h... yes checking for linux/if_addr.h... yes checking for arpa/nameser.h... yes checking for sys/param.h... (cached) yes checking for sys/time.h... (cached) yes checking for sys/timers.h... no checking for sys/sysctl.h... yes checking for netinet/in_system.h... no checking for netinet/in_systm.h... yes checking for netinet/in.h... (cached) yes checking for resolv.h... yes checking for net/if_var.h... no checking for netinet/ip.h... yes checking for netinet/in_var.h... no checking for library containing inet_pton... none required checking for library containing inet_ntop... none required checking for library containing setsockopt... none required checking for recvmsg... yes checking for inline... inline checking size of time_t... 8 checking whether char is unsigned... no checking size of signed char... 1 checking for s_char... no checking for long long... yes checking size of short... (cached) 2 checking size of int... (cached) 4 checking size of long... (cached) 4 checking size of long long... 8 checking for uid_t... yes checking for gid_t... yes checking if we're including debugging code... no checking for semaphore.h... yes checking for socketpair... yes checking for _beginthread... no checking for pthread.h... yes checking POSIX thread version... 10 checking for LinuxThreads pthread.h... yes checking for GNU Pth pthread.h... no checking for sched.h... yes checking for pthread_create in default libraries... yes configure: ol_link_threads: ol_link_pthreads <> checking for sched_yield... yes checking for pthread_yield... no checking for thr_yield... no checking for pthread_kill... yes checking for pthread_rwlock_destroy with ... yes checking for pthread_detach with ... yes checking for pthread_setconcurrency... yes checking for pthread_getconcurrency... yes checking for thr_setconcurrency... no checking for thr_getconcurrency... no checking for pthread_kill_other_threads_np... yes checking for LinuxThreads implementation... yes checking for LinuxThreads consistency... yes checking if pthread_create() works... yes checking for thread specific errno... yes checking for thread specific h_errno... yes checking for sem_timedwait... yes checking size of pthread_t... 4 checking for sigwait... yes checking for pthread_attr_getstacksize... yes checking for pthread_attr_setstacksize... yes checking for sysconf... yes checking for sys/clockctl.h... no checking if we should use /dev/clockctl... no checking for sys/capability.h... yes checking for sys/prctl.h... yes checking if we have linux capabilities (libcap)... yes checking for priv.h... no checking if we have solaris privileges... no checking for sys/mac.h... no checking if we should use TrustedBSD MAC privileges... no checking for library containing res_init... no checking for sys/types.h... (cached) yes checking for netinet/in.h... (cached) yes checking for arpa/nameser.h... (cached) yes checking for netdb.h... yes checking for resolv.h... (cached) yes checking for res_init... no checking for __res_init... yes checking for inet_ntop... yes checking for inet_pton... yes checking for uintptr_t... (cached) yes checking for int32... no checking for u_int32... no checking for sys/timepps.h... no checking for struct timespec... yes checking for struct ntptimeval... yes checking for md5.h... no checking for library containing MD5Init... no checking for MD5Init... no checking for sysconf... (cached) yes checking for getdtablesize... yes checking for sigaction... yes checking for sigset... yes checking for sigvec... no checking for SIGIO... yes checking if we want to use SIGIO... Possible for mips-buildroot-linux-uclibc but disabled because of reported problems checking for SIGPOLL... yes checking if we can use SIGPOLL for UDP I/O... no checking if we can use SIGPOLL for TTY I/O... no checking number of arguments to gettimeofday()... 2 checking for settimeofday... yes checking if we'll use clock_settime or settimeofday or stime... clock_settime() checking for openssl... /home/buildroot/instance-0/output-1/host/bin/openssl checking pkg-config for openssl... yes, version 3.4.0 configure: Searching for libcrypto in /home/buildroot/instance-0/output-1/host/bin/../mips-buildroot-linux-uclibc/sysroot/usr/lib checking for EVP_MD_CTX_new in -lcrypto... yes configure: libcrypto found in /home/buildroot/instance-0/output-1/host/bin/../mips-buildroot-linux-uclibc/sysroot/usr/lib configure: Searching for openssl/evp.h without -I checking for openssl/evp.h... yes checking if crypto works without runpath... yes checking If /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports -Werror... yes checking if we will link to ssl library... yes checking for openssl/cmac.h... yes checking for EVP_MD_do_all_sorted... yes checking if we want to use SSL library's secure random numbers... yes checking for RAND_bytes... yes checking for RAND_poll... yes configure: Using SSL library's secure random number generator checking for gawk... (cached) gawk checking whether make sets $(MAKE)... (cached) yes checking whether ln -s works... yes checking for perl... /usr/bin/perl checking for test... /usr/bin/test checking for net-snmp-config... no checking for net-snmp-config path... checking for library containing openlog... none required checking if we want to use libseccomp sandboxing (EXPERIMENTAL)... no checking for facilitynames in syslog.h... checking for bstring.h... no checking for sys/procctl.h... no checking for dns_sd.h... no checking for fcntl.h... (cached) yes checking for fnmatch.h... yes checking for ieeefp.h... no checking for inttypes.h... (cached) yes checking for kvm.h... no checking for math.h... yes checking for memory.h... (cached) yes checking for netdb.h... (cached) yes checking for poll.h... yes checking for sgtty.h... yes checking for stdatomic.h... yes checking for _Bool... yes checking for stdbool.h that conforms to C99 or later... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for termio.h... yes checking for termios.h... yes checking for timepps.h... no checking for timex.h... no checking for unistd.h... (cached) yes checking for utmp.h... yes checking for utmpx.h... yes checking for net/if6.h... no checking for net/route.h... yes checking for netinfo/ni.h... no checking for sun/audioio.h... no checking for sys/audioio.h... no checking for sys/file.h... yes checking for sys/ioctl.h... yes checking for sys/ipc.h... yes checking for sys/lock.h... no checking for sys/mman.h... (cached) yes checking for sys/modem.h... no checking for sys/ppsclock.h... no checking for sys/ppstime.h... no checking for sched.h... (cached) yes checking for sys/select.h... (cached) yes checking for sys/signal.h... yes checking for sys/sockio.h... no checking for machine/soundcard.h... no checking for sys/soundcard.h... yes checking for sys/stat.h... (cached) yes checking for sys/stream.h... no checking for stropts.h... no checking for sys/stropts.h... (cached) no checking for sys/syssgi.h... no checking for sys/systune.h... no checking for sys/termios.h... yes checking for sys/tpro.h... no checking for sys/wait.h... (cached) yes checking for waitpid... yes checking for atomic_thread_fence... no checking for atomic_thread_fence()... yes checking for ntp_adjtime... no checking for ntp_gettime... no checking for __ntp_gettime... no checking for adjtimex... yes checking for sys/proc.h... no checking for sys/resource.h... yes checking for sys/shm.h... yes checking for sys/timex.h... yes checking return type of signal handlers... void checking for off_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for a fallback value for HZ... 100 checking if we need to override the system's value for HZ... no checking for struct rt_msghdr... no checking for struct rtattr... yes checking struct sigaction for sa_sigaction... yes checking for struct ppsclockev... no checking for struct snd_size... no checking struct clockinfo for hz... no checking struct clockinfo for tickadj... (cached) no checking for struct ntptimeval.time.tv_nsec... no checking for arc4random_buf... no checking for daemon... yes checking for finite... no checking for isfinite... no checking for isfinite with ... yes checking for fnmatch... yes checking for getbootfile... no checking for getuid... yes checking for getrusage... yes checking for nanosleep... yes checking for strsignal... (cached) yes checking for strsignal... (cached) yes checking for closefrom... no checking for getdtablesize... (cached) yes checking for mkstemp... yes checking for mktime... yes checking for mlockall... yes checking for nice... yes checking for plock... no checking for pututline... yes checking for pututxline... yes checking for readlink... yes checking for rtprio... no checking for a POSIX-2008 compliant realpath()... CROSS COMPILE! checking for sched_setscheduler... yes checking for setlinebuf... yes checking for setpgid... yes checking for setpriority... yes checking for setsid... yes checking for setvbuf... yes checking for strdup... (cached) yes checking for strnlen... yes checking for memchr... yes checking for strerror... yes checking for setrlimit... yes checking for strchr... (cached) yes checking for timer_create... yes checking for RLIMIT_MEMLOCK... yes checking for RLIMIT_STACK... yes checking for the default number of 4k stack pages... 50 checking for the default number of megabytes to MEMLOCK... -1 checking for _exit... yes checking for umask... yes checking for uname... yes checking for updwtmp... yes checking for updwtmpx... yes checking if we need extra help to define struct iovec... 0 checking number of arguments taken by setpgrp()... 0 checking if we need to declare 'errno'... no checking if we may declare 'h_errno'... yes checking if declaring 'syscall()' is ok... no checking if we will open the broadcast socket... yes checking if process groups are set with -pid... yes checking if we need a ctty for F_SETOWN... no checking if the OS clears cached routes when more specifics become available... no checking if the wildcard socket needs REUSEADDR to bind other addresses... yes checking for a minimum recommended value of tickadj... no checking if the TTY code permits PARENB and IGNPAR... no checking if we're including processing time debugging code... no checking for a the number of minutes in a DST adjustment... 60 checking if ntpd will retry permanent DNS failures... no checking availability of ntp_{adj,get}time()... inline checking if sys/timex.h has STA_FLL... yes checking if we have kernel PLL support... yes checking if SIOCGIFCONF returns buffer size in the buffer... no checking for TTY PPS ioctl TIOCGPPSEV... no checking for TTY PPS ioctl TIOCSPPS... no checking for TTY PPS ioctl CIOGETEV... no checking for linux/serial.h... yes checking SHMEM_STATUS support... yes checking Datum/Bancomm bc635/VME interface... no checking TrueTime GPS receiver/VME interface... no checking for PCL720 clock support... no checking for default inclusion of all suitable non-PARSE clocks... yes checking if we have support for PARSE clocks... yes checking if we have support for audio clocks... yes checking if we have support for the SHM refclock interface... yes checking for termios modem control... yes checking ACTS modem service... yes checking Arbiter 1088A/B GPS receiver... yes checking Arcron MSF receiver... yes checking Austron 2200A/2201A GPS receiver... yes checking ATOM PPS interface... no checking Chrono-log K-series WWVB receiver... yes checking CHU modem/decoder... yes checking CHU audio/decoder... yes checking Datum Programmable Time System... yes checking Dumb generic hh:mm:ss local clock... yes checking Forum Graphic GPS... yes checking Heath GC-1000 WWV/WWVH receiver... yes checking for hopf serial clock device... yes checking for hopf PCI clock 6039... yes checking HP 58503A GPS receiver... yes checking IRIG audio decoder... yes checking for JJY receiver... yes checking Rockwell Jupiter GPS receiver... no checking Leitch CSD 5300 Master Clock System Driver... yes checking local clock reference... yes checking Magnavox MX4200 GPS receiver... no checking for NeoClock4X receiver... yes checking NMEA GPS receiver... yes checking for strtoll... yes checking for GPSD JSON receiver... yes checking for ONCORE Motorola VP/UT Oncore GPS... no checking for Palisade clock... yes checking Conrad parallel port radio clock... yes checking PST/Traconex 1020 WWV/WWVH receiver... yes checking RIPENCC specific Trimble driver... no checking for SHM clock attached thru shared memory... no checking Spectracom 8170/Netclock/2 WWVB receiver... yes checking KSI/Odetics TPRO/S GPS receiver/IRIG interface... no checking Kinemetrics/TrueTime receivers... yes checking TrueTime 560 IRIG-B decoder... no checking Ultralink M320 WWVB receiver... yes checking Spectracom TSYNC PCI timing board... yes checking WWV receiver... yes checking for Zyfer receiver... yes checking for default inclusion of all suitable PARSE clocks... no checking Diem Computime Radio Clock... no checking ELV/DCF7000 clock... no checking HOPF 6021 clock... no checking Meinberg clocks... no checking DCF77 raw time code... no checking RCC 8000 clock... no checking Schmid DCF77 clock... no checking Trimble GPS receiver/TAIP protocol... no checking Trimble GPS receiver/TSIP protocol... no checking WHARTON 400A Series clock... no checking VARITEXT clock... no checking SEL240X clock... no checking if we need to make and use the parse libraries... no checking if NTP Autokey protocol will be supported... yes checking if we want to run check-layout... no checking if we can make dcf parse utilities... no checking if we can build kernel streams modules for parse... no checking if we need basic refclock support... yes checking if we want HP-UX adjtimed support... no checking if we want QNX adjtime support... no checking if we can read kmem... no checking if adjtime is accurate... yes checking the name of 'tick' in the kernel... _tick checking for the units of 'tick'... usec checking the name of 'tickadj' in the kernel... _tickadj checking for the units of 'tickadj'... usec checking half-heartedly for 'dosynctodr' in the kernel... _dosynctodr checking half-heartedly for 'noprintf' in the kernel... _noprintf checking for a default value for 'tick'... txc.tick checking for a default value for 'tickadj'... no configure: WARNING: Can't read kmem but no PRESET_TICK. No tickadj. checking if we want and can make the ntptime utility... yes checking if we want and can make the tickadj utility... yes checking if we want and can make the timetrim utility... no checking if we want to build the NTPD simulator... no checking if sntp will be built... no checking if we want to build ntpsnmpd... no checking if we should always slew the time... no checking if we should step and slew the time... no checking if ntpdate should step the time... no checking if we should sync TODR clock every hour... no checking if we should avoid kernel FLL bug... no checking if we want new session key behavior... yes checking if we want the explicit 127.0.0.0/8 martian filter... yes checking if we want correct mode7 fudgetime2 behavior... yes checking if we want a debug assert on an OOB KoD RATE value... yes checking if we should use the IRIG sawtooth filter... no checking if we should enable NIST lockclock scheme... no checking if we want support for Samba's signing daemon... no checking if we want 'magic' PPS support... yes checking for openat... yes checking for fdopendir... yes checking for fstatat... yes checking for libscf.h... no checking for struct sockaddr_storage... yes checking for sockaddr_storage.__ss_family... no checking for in_port_t... yes checking type of socklen arg for getsockname()... socklen_t checking struct sockaddr for sa_len... no checking for IPv6 structures... yes checking for Kame IPv6 support... no checking for in6_pktinfo... yes checking for sockaddr_in6.sin6_scope_id... yes checking for in6addr_any... yes checking for struct if_laddrconf... no checking for struct if_laddrreq... no checking for multicast IP support... yes checking arg type needed for setsockopt() IP*_MULTICAST_LOOP... u_int checking for getifaddrs... yes checking for if_nametoindex... yes checking for interface list sysctl... no checking if we want the saveconfig mechanism... yes checking if we want the experimental leap smear code... no checking if we want dynamic interleave support... no checking for ruby... no checking if we want to enable tests with undiagnosed problems... yes checking if we can run test-ntp_restrict... no checking if we can run test-ntp_scanner... no checking if we can run test-ntp_signd... no checking whether sigsetjmp is declared... yes checking whether siglongjmp is declared... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating adjtimed/Makefile config.status: creating clockstuff/Makefile config.status: creating include/Makefile config.status: creating include/isc/Makefile config.status: creating kernel/Makefile config.status: creating kernel/sys/Makefile config.status: creating libntp/Makefile config.status: creating libparse/Makefile config.status: creating ntpd/Makefile config.status: creating ntpd/complete.conf config.status: creating ntpdate/Makefile config.status: creating ntpdc/Makefile config.status: creating ntpdc/nl.pl config.status: creating ntpq/Makefile config.status: creating ntpsnmpd/Makefile config.status: creating parseutil/Makefile config.status: creating scripts/Makefile config.status: creating scripts/build/Makefile config.status: creating scripts/build/genAuthors config.status: creating scripts/build/mkver config.status: creating scripts/calc_tickadj/Makefile config.status: creating scripts/calc_tickadj/calc_tickadj config.status: creating scripts/lib/Makefile config.status: creating scripts/ntp-wait/Makefile config.status: creating scripts/ntp-wait/ntp-wait config.status: creating scripts/ntpsweep/Makefile config.status: creating scripts/ntpsweep/ntpsweep config.status: creating scripts/ntptrace/Makefile config.status: creating scripts/ntptrace/ntptrace config.status: creating scripts/ntpver config.status: creating scripts/plot_summary config.status: creating scripts/summary config.status: creating scripts/update-leap/Makefile config.status: creating scripts/update-leap/update-leap config.status: creating tests/Makefile config.status: creating tests/bug-2803/Makefile config.status: creating tests/libntp/Makefile config.status: creating tests/ntpd/Makefile config.status: creating tests/ntpq/Makefile config.status: creating tests/sandbox/Makefile config.status: creating tests/sec-2853/Makefile config.status: creating util/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands === configuring in sntp (/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/sntp) configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--target=mips-buildroot-linux-uclibc' '--host=mips-buildroot-linux-uclibc' '--build=x86_64-pc-linux-gnu' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--disable-static' '--enable-shared' '--with-shared' '--program-transform-name=s,,,' '--disable-tickadj' '--disable-debugging' '--with-yielding-select=yes' '--disable-local-libevent' '--with-crypto' '--enable-openssl-random' '--with-hardenfile=default' '--enable-linuxcaps' '--without-lineeditlibs' '--without-ntpsnmpd' '--disable-ATOM' '--disable-SHM' '--without-sntp' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=mips-buildroot-linux-uclibc' 'target_alias=mips-buildroot-linux-uclibc' 'CC=/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g3 ' 'LDFLAGS=' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'CPP=/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-cpp' --cache-file=/dev/null --srcdir=. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for mips-buildroot-linux-uclibc-strip... /bin/true checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... mips-buildroot-linux-uclibc checking whether make supports the include directive... yes (GNU style) checking for mips-buildroot-linux-uclibc-cc... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc accepts -g... yes checking for /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc option to enable C11 features... none needed checking whether /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc understands -c and -o together... yes checking dependency style of /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking for vfork.h... no checking for stdarg.h... yes checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle #warning... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports __attribute__((...))... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle -Wstrict-overflow... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle -Winit-self... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle -Wno-format -Wno-format-security... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc can handle -Wformat -Wno-format-truncation... yes checking if linker supports omitting unused code and data... no checking additional compiler flags... none needed checking additional linker flags... none needed checking whether byte ordering is bigendian... (cached) yes checking for working volatile... yes checking how to run the C preprocessor... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-cpp checking for compile/link hardening flags... in file harden/default checking for install dir and man conventions... in file loc/debian checking for mips-buildroot-linux-uclibc-ar... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar checking the archiver (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar) interface... ar checking for a sed that does not truncate output... /bin/sed checking for a sed that does not truncate output... (cached) /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking how to print strings... printf checking for pid_t... yes checking for fork... yes checking for vfork... yes checking for vprintf... yes checking for size_t... yes checking for /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc options needed to detect all undeclared functions... none needed checking whether strerror_r is declared... yes checking for egrep -e... (cached) /bin/grep -E checking for unsigned long long int... yes checking for vsnprintf... yes checking whether vsnprintf is C99 compliant... no checking if C99-snprintf replacement vsnprintf will be used... yes checking for inttypes.h... (cached) yes checking for locale.h... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for struct lconv.decimal_point... yes checking for struct lconv.thousands_sep... yes checking for long double... yes checking for long long int... yes checking for unsigned long long int... (cached) yes checking for size_t... (cached) yes checking for intmax_t... yes checking for uintmax_t... yes checking for uintptr_t... yes checking for ptrdiff_t... yes checking for localeconv... yes checking for an ANSI C-conforming const... yes checking for snprintf... yes checking whether snprintf is C99 compliant... no checking if C99-snprintf replacement snprintf will be used... yes checking for mips-buildroot-linux-uclibc-pkg-config... /home/buildroot/instance-0/output-1/host/bin/pkg-config checking if pkg-config is at least version 0.15.0... yes checking for ld used by /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld checking if the linker (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld) is GNU ld... yes checking for directory path separator... '/' checking line editing libraries... no checking for library containing cos... none required checking for working fork... cross configure: WARNING: result yes guessed because of cross compilation checking for working vfork... (cached) yes checking for working alloca.h... yes checking for alloca... yes checking whether strerror_r returns char *... yes checking for library containing clock_gettime... none required checking for clock_getres... yes checking for clock_gettime... yes checking for clock_settime... yes checking for getclock... no checking for stime... yes checking for timegm... yes checking for strlcpy... yes checking for strlcat... yes checking for library containing snprintb... no checking for errno.h... yes checking for sys/socket.h... yes checking for sys/types.h... (cached) yes checking for time.h... yes checking for net/if.h... yes checking for linux/if_addr.h... yes checking for arpa/nameser.h... yes checking for sys/param.h... yes checking for sys/time.h... yes checking for sys/timers.h... no checking for sys/sysctl.h... yes checking for netinet/in_system.h... no checking for netinet/in_systm.h... yes checking for netinet/in.h... yes checking for resolv.h... yes checking for net/if_var.h... no checking for netinet/ip.h... yes checking for netinet/in_var.h... no checking for library containing inet_pton... none required checking for library containing inet_ntop... none required checking for library containing setsockopt... none required checking for recvmsg... yes checking for inline... inline checking size of time_t... 8 checking whether char is unsigned... no checking size of signed char... 1 checking for s_char... no checking for long long... yes checking size of short... 2 checking size of int... 4 checking size of long... 4 checking size of long long... 8 checking for uid_t... yes checking for gid_t... yes checking if we're including debugging code... no checking for semaphore.h... yes checking for socketpair... yes checking for _beginthread... no checking for pthread.h... yes checking POSIX thread version... 10 checking for LinuxThreads pthread.h... yes checking for GNU Pth pthread.h... no checking for sched.h... yes checking for pthread_create in default libraries... yes configure: ol_link_threads: ol_link_pthreads <> checking for sched_yield... yes checking for pthread_yield... no checking for thr_yield... no checking for pthread_kill... yes checking for pthread_rwlock_destroy with ... yes checking for pthread_detach with ... yes checking for pthread_setconcurrency... yes checking for pthread_getconcurrency... yes checking for thr_setconcurrency... no checking for thr_getconcurrency... no checking for pthread_kill_other_threads_np... yes checking for LinuxThreads implementation... yes checking for LinuxThreads consistency... yes checking if pthread_create() works... yes checking for thread specific errno... yes checking for thread specific h_errno... yes checking for sem_timedwait... yes checking size of pthread_t... 4 checking for sigwait... yes checking for pthread_attr_getstacksize... yes checking for pthread_attr_setstacksize... yes checking for sysconf... yes checking for sys/clockctl.h... no checking if we should use /dev/clockctl... no checking for sys/capability.h... yes checking for sys/prctl.h... yes checking if we have linux capabilities (libcap)... yes checking for priv.h... no checking if we have solaris privileges... no checking for sys/mac.h... no checking if we should use TrustedBSD MAC privileges... no checking for library containing res_init... no checking for sys/types.h... (cached) yes checking for netinet/in.h... (cached) yes checking for arpa/nameser.h... (cached) yes checking for netdb.h... yes checking for resolv.h... (cached) yes checking for res_init... no checking for __res_init... yes checking for inet_ntop... yes checking for inet_pton... yes checking for uintptr_t... (cached) yes checking for int32... no checking for u_int32... no checking for sys/timepps.h... no checking for struct timespec... yes checking for struct ntptimeval... yes checking for md5.h... no checking for library containing MD5Init... no checking for MD5Init... no checking for sysconf... (cached) yes checking for getdtablesize... yes checking for sigaction... yes checking for sigset... yes checking for sigvec... no checking for SIGIO... yes checking if we want to use SIGIO... Possible for mips-buildroot-linux-uclibc but disabled because of reported problems checking for SIGPOLL... yes checking if we can use SIGPOLL for UDP I/O... no checking if we can use SIGPOLL for TTY I/O... no checking number of arguments to gettimeofday()... 2 checking for settimeofday... yes checking if we'll use clock_settime or settimeofday or stime... clock_settime() checking for openssl... /home/buildroot/instance-0/output-1/host/bin/openssl checking pkg-config for openssl... yes, version 3.4.0 configure: Searching for libcrypto in /home/buildroot/instance-0/output-1/host/bin/../mips-buildroot-linux-uclibc/sysroot/usr/lib checking for EVP_MD_CTX_new in -lcrypto... yes configure: libcrypto found in /home/buildroot/instance-0/output-1/host/bin/../mips-buildroot-linux-uclibc/sysroot/usr/lib configure: Searching for openssl/evp.h without -I checking for openssl/evp.h... yes checking if crypto works without runpath... yes checking If /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports -Werror... yes checking if we will link to ssl library... yes checking for openssl/cmac.h... yes checking for EVP_MD_do_all_sorted... yes checking if we want to use SSL library's secure random numbers... yes checking for RAND_bytes... yes checking for RAND_poll... yes configure: Using SSL library's secure random number generator checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-nm checking the name lister (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to mips-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld option to reload object files... -r checking for mips-buildroot-linux-uclibc-objdump... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-objdump checking how to recognize dependent libraries... pass_all checking for mips-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for mips-buildroot-linux-uclibc-ar... (cached) /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ar checking for archiver @FILE support... @ checking for mips-buildroot-linux-uclibc-strip... (cached) /bin/true checking for mips-buildroot-linux-uclibc-ranlib... /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-ranlib checking command to parse /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc-nm output from /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mips-buildroot-linux-uclibc-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc static flag -static works... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports -c -o file.o... yes checking if /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-gcc linker (/home/buildroot/instance-0/output-1/host/bin/mips-buildroot-linux-uclibc-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking if sntp will be built... no checking for egrep... (cached) /bin/grep -E checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for sys/mman.h... yes checking for sys/param.h... (cached) yes checking for sys/poll.h... yes checking for sys/procset.h... no checking for sys/select.h... yes checking for sys/socket.h... (cached) yes checking for sys/stropts.h... no checking for sys/time.h... (cached) yes checking for sys/un.h... yes checking for sys/wait.h... yes checking for dlfcn.h... (cached) yes checking for errno.h... (cached) yes checking for fcntl.h... yes checking for libgen.h... yes checking for libintl.h... yes checking for memory.h... yes checking for netinet/in.h... (cached) yes checking for setjmp.h... yes checking for stdbool.h... yes checking for sysexits.h... yes checking for unistd.h... (cached) yes checking for utime.h... yes checking for stdarg.h... (cached) yes checking for string.h... (cached) yes checking for limits.h... yes checking for inttypes.h... (cached) yes checking for working stdnoreturn.h... yes checking for runetype.h... no checking for wchar.h... (cached) yes checking for wchar_t... yes checking for wint_t... yes checking for int8_t... yes checking for uint8_t... yes checking for int16_t... yes checking for uint16_t... yes checking for int32_t... yes checking for uint32_t... yes checking for intptr_t... yes checking for uintptr_t... (cached) yes checking for uint_t... no checking for pid_t... (cached) yes checking for size_t... (cached) yes checking for ptrdiff_t... (cached) yes checking size of char *... 4 checking size of int... (cached) 4 checking size of long... (cached) 4 checking size of short... (cached) 2 checking for pathfind in -lgen... no checking for gettext in -lintl... yes checking for working fork... (cached) yes checking for working vfork... (cached) yes checking for mmap... yes checking for canonicalize_file_name... yes checking for snprintf... (cached) yes checking for strdup... yes checking for strchr... yes checking for strrchr... yes checking for strsignal... yes checking for fchmod... yes checking for fstat... yes checking for chmod... yes checking for a sed that does not truncate output... (cached) /bin/sed configure: Using supplied libopts tearoff checking whether a reg expr header is specified... no checking whether with-libregex was specified... no checking whether with-libregex-cflags was specified... no checking whether with-libregex-libs was specified... no checking whether libregex functions properly... no checking whether pathfind(3) works... no checking whether /dev/zero is readable device... crw-rw-rw- 1 root root 1, 5 Dec 10 11:11 /dev/zero checking whether we have a functional realpath(3C)... no checking whether strftime() works... no checking whether fopen accepts "b" mode... no checking whether fopen accepts "t" mode... no checking whether not wanting optional option args... yes checking if libevent 2 or later is installed... yes, version 2.1.12-stable checking for library containing openlog... none required checking for netdb.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for syslog.h... yes checking for sysexits.h... (cached) yes checking for facilitynames in syslog.h... checking for _Bool... yes checking for stdbool.h that conforms to C99 or later... (cached) yes checking for struct sockaddr_storage... yes checking for sockaddr_storage.__ss_family... no checking for in_port_t... yes checking type of socklen arg for getsockname()... socklen_t checking struct sockaddr for sa_len... no checking for IPv6 structures... yes checking for Kame IPv6 support... no checking for in6_pktinfo... yes checking for sockaddr_in6.sin6_scope_id... yes checking for in6addr_any... yes checking for struct if_laddrconf... no checking for struct if_laddrreq... no checking for multicast IP support... yes checking arg type needed for setsockopt() IP*_MULTICAST_LOOP... u_int checking for getifaddrs... yes checking for if_nametoindex... yes checking for socket... yes checking for ruby... no checking if we want to enable tests with undiagnosed problems... yes checking if we can run test-kodDatabase... yes checking if we can run test-kodFile... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libopts/Makefile config.status: creating Makefile config.status: creating include/Makefile config.status: creating scripts/Makefile config.status: creating tests/Makefile config.status: creating tests/fileHandlingTest.h config.status: creating unity/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands >>> ntp 4.2.8p18 Building GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j17 -C /home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/ make[1]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18' cd . && \ ./scripts/build/checkChangeLog Compiling with GCC now generates lots of new warnings. Don't be concerned. They're just warnings. Don't send bug reports about the warnings, either. Feel free to send patches that fix these warnings, though. /usr/bin/make all-recursive make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18' Making all in scripts make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts' Making all in build make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/build' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/build' Making all in calc_tickadj make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/calc_tickadj' /usr/bin/make all-am make[5]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/calc_tickadj' ../../config.status --file=calc_tickadj.8+:./calc_tickadj.mdoc.in config.status: creating calc_tickadj.8+ mv calc_tickadj.8+ calc_tickadj.8 make[5]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/calc_tickadj' make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/calc_tickadj' Making all in ntp-wait make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/ntp-wait' ../../config.status --file=ntp-wait.8+:./ntp-wait.mdoc.in config.status: creating ntp-wait.8+ mv ntp-wait.8+ ntp-wait.8 make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/ntp-wait' Making all in ntpsweep make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/ntpsweep' ../../config.status --file=ntpsweep.1+:./ntpsweep.mdoc.in config.status: creating ntpsweep.1+ mv ntpsweep.1+ ntpsweep.1 make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/ntpsweep' Making all in ntptrace make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/ntptrace' ../../config.status --file=ntptrace.1+:./ntptrace.mdoc.in config.status: creating ntptrace.1+ mv ntptrace.1+ ntptrace.1 make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/ntptrace' Making all in lib make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/lib' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/lib' Making all in update-leap make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/update-leap' Makefile:937: warning: overriding recipe for target 'update-leap' Makefile:549: warning: ignoring old recipe for target 'update-leap' ../../config.status --file=update-leap.8+:./update-leap.mdoc.in config.status: creating update-leap.8+ mv update-leap.8+ update-leap.8 make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts/update-leap' make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/scripts' Making all in include make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/include' Making all in isc make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/include/isc' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/include/isc' make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/include' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/include' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/include' Making all in libntp make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/libntp' /usr/bin/make all-am make[4]: Entering directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/libntp' CC systime.o CC a_md5encrypt.o CC adjtime.o CC atoint.o CC atolfp.o CC atouint.o CC audio.o CC authkeys.o CC authusekey.o CC authreadkeys.o CC bsd_strerror.o CC buftvtots.o CC caljulian.o CC caltontp.o CC calyearstart.o CC clocktime.o CC clocktypes.o CC decodenetnum.o CC dofptoa.o CC dolfptoa.o CC emalloc.o CC findconfig.o CC getopt.o CC hextoint.o CC hextolfp.o CC humandate.o CC icom.o CC iosignal.o CC is_ip_address.o CC lib_strbuf.o CC libssl_compat.o CC machines.o CC mktime.o CC modetoa.o CC mstolfp.o CC msyslog.o CC netof.o CC ntp_calendar.o machines.c: In function 'ntp_set_tod': machines.c:483:28: error: passing argument 1 of 'stime' from incompatible pointer type [-Wincompatible-pointer-types] 483 | rc = stime(&tp); /* lie as bad as SysVR4 */ | ^~~ | | | long int * In file included from ../include/ntp_machine.h:16, from ../include/ntp_types.h:28, from ../include/ntp_fp.h:8, from ../include/ntp.h:10, from machines.c:11: ../../../host/mips-buildroot-linux-uclibc/sysroot/usr/include/time.h:292:33: note: expected 'const time_t *' {aka 'const long long int *'} but argument is of type 'long int *' 292 | extern int stime (const time_t *__when) __THROW; | ~~~~~~~~~~~~~~^~~~~~ make[4]: *** [Makefile:1169: machines.o] Error 1 make[4]: *** Waiting for unfinished jobs.... make[4]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/libntp' make[3]: *** [Makefile:886: all] Error 2 make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/libntp' make[2]: *** [Makefile:664: all-recursive] Error 1 make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18' make[1]: *** [Makefile:596: all] Error 2 make[1]: Leaving directory '/home/buildroot/instance-0/output-1/build/ntp-4.2.8p18' make: *** [package/pkg-generic.mk:289: /home/buildroot/instance-0/output-1/build/ntp-4.2.8p18/.stamp_built] Error 2 make: Leaving directory '/home/buildroot/instance-0/buildroot'