installing genesys.conf in /etc/sane.d/genesys.conf... installing gt68xx.conf in /etc/sane.d/gt68xx.conf... installing hp.conf in /etc/sane.d/hp.conf... installing hp3900.conf in /etc/sane.d/hp3900.conf... installing hp4200.conf in /etc/sane.d/hp4200.conf... installing hp5400.conf in /etc/sane.d/hp5400.conf... installing hs2p.conf in /etc/sane.d/hs2p.conf... installing ibm.conf in /etc/sane.d/ibm.conf... installing kodak.conf in /etc/sane.d/kodak.conf... installing kodakaio.conf in /etc/sane.d/kodakaio.conf... installing kvs1025.conf in /etc/sane.d/kvs1025.conf... installing leo.conf in /etc/sane.d/leo.conf... installing lexmark.conf in /etc/sane.d/lexmark.conf... installing ma1509.conf in /etc/sane.d/ma1509.conf... installing magicolor.conf in /etc/sane.d/magicolor.conf... installing matsushita.conf in /etc/sane.d/matsushita.conf... installing microtek.conf in /etc/sane.d/microtek.conf... installing microtek2.conf in /etc/sane.d/microtek2.conf... installing mustek.conf in /etc/sane.d/mustek.conf... installing mustek_usb.conf in /etc/sane.d/mustek_usb.conf... installing nec.conf in /etc/sane.d/nec.conf... installing net.conf in /etc/sane.d/net.conf... installing pie.conf in /etc/sane.d/pie.conf... installing pieusb.conf in /etc/sane.d/pieusb.conf... installing pixma.conf in /etc/sane.d/pixma.conf... installing plustek.conf in /etc/sane.d/plustek.conf... installing plustek_pp.conf in /etc/sane.d/plustek_pp.conf... installing ricoh.conf in /etc/sane.d/ricoh.conf... installing rts8891.conf in /etc/sane.d/rts8891.conf... installing s9036.conf in /etc/sane.d/s9036.conf... installing sceptre.conf in /etc/sane.d/sceptre.conf... installing sharp.conf in /etc/sane.d/sharp.conf... installing sm3840.conf in /etc/sane.d/sm3840.conf... installing snapscan.conf in /etc/sane.d/snapscan.conf... installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... make[5]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' Making install in frontend make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/frontend' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/frontend' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/sbin' make[3]: Nothing to be done for `install-data-am'. /bin/sh ../libtool --mode=install /usr/bin/install -c scanimage '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c saned '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/sbin' libtool: install: /usr/bin/install -c scanimage /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin/scanimage libtool: install: /usr/bin/install -c saned /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/sbin/saned make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/frontend' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/frontend' Making install in tools make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' /usr/bin/make install-am make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /bin/sh ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin' /usr/bin/install -c -m 644 sane-backends.pc '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /usr/bin/install -c sane-config '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin' libtool: install: /usr/bin/install -c sane-find-scanner /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/bin/umax_pp make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' Making install in po make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/po' if test "sane-backends" = "gettext-tools"; then \ /bin/mkdir -p /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/po' Making install in testsuite make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' Making install in sanei make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/sanei' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/sanei' Making install in tools make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/tools' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/tools' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/tools' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/tools' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta '/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/share/doc/sane-backends' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' >>> sane-backends 1.0.27 Fixing package configuration files >>> sane-backends 1.0.27 Fixing libtool files for la in $(find /home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/run/instance-3/output:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/run/instance-3/output/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/run/instance-3/output:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sane-backends 1.0.27 Installing to target PATH="/home/buildroot/autobuild/run/instance-3/output/host/bin:/home/buildroot/autobuild/run/instance-3/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-3/output/target install -C /home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/ make[1]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' Making install in include make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/include' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/include' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/include/sane' /usr/bin/install -c -m 644 sane/sane.h sane/saneopts.h '/home/buildroot/autobuild/run/instance-3/output/target/usr/include/sane' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/include' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/include' Making install in lib make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/lib' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/lib' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/lib' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/lib' Making install in sanei make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/sanei' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/sanei' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/sanei' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/sanei' Making install in backend make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' /usr/bin/make install-am make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/lib' /bin/sh ../libtool --silent --mode=install /usr/bin/install -c libsane.la '/home/buildroot/autobuild/run/instance-3/output/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/lib/sane' /bin/sh ../libtool --silent --mode=install /usr/bin/install -c libsane-abaton.la libsane-agfafocus.la libsane-apple.la libsane-artec.la libsane-artec_eplus48u.la libsane-as6e.la libsane-avision.la libsane-bh.la libsane-canon.la libsane-canon630u.la libsane-canon_dr.la libsane-cardscan.la libsane-coolscan.la libsane-coolscan2.la libsane-coolscan3.la libsane-dc25.la libsane-dmc.la libsane-epjitsu.la libsane-epson.la libsane-epson2.la libsane-fujitsu.la libsane-genesys.la libsane-gt68xx.la libsane-hp.la libsane-hp3500.la libsane-hp3900.la libsane-hp4200.la libsane-hp5400.la libsane-hp5590.la libsane-hpljm1005.la libsane-hs2p.la libsane-ibm.la libsane-kodak.la libsane-kodakaio.la libsane-kvs1025.la libsane-kvs20xx.la libsane-kvs40xx.la libsane-leo.la libsane-lexmark.la libsane-ma1509.la libsane-magicolor.la libsane-matsushita.la libsane-microtek.la libsane-microtek2.la libsane-mustek.la libsane-mustek_usb.la libsane-mustek_usb2.la libsane-nec.la libsane-net.la libsane-niash.la libsane-pie.la libsane-pieusb.la libsane-pixma.la libsane-plustek.la libsane-plustek_pp.la libsane-ricoh.la libsane-rts8891.la libsane-s9036.la libsane-sceptre.la libsane-sharp.la libsane-sm3600.la libsane-sm3840.la libsane-snapscan.la libsane-sp15c.la libsane-st400.la libsane-stv680.la libsane-tamarack.la libsane-teco1.la libsane-teco2.la libsane-teco3.la libsane-test.la libsane-u12.la libsane-umax.la libsane-umax_pp.la libsane-umax1220u.la libsane-xerox_mfp.la libsane-p5.la libsane-dll.la '/home/buildroot/autobuild/run/instance-3/output/target/usr/lib/sane' libtool: install: warning: remember to run `libtool --finish /usr/lib' libtool: install: warning: remember to run `libtool --finish /usr/lib/sane' /usr/bin/make install-data-hook make[5]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' rm -f /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/sane/libsane.* test -z "/etc/sane.d" || /bin/mkdir -p "/home/buildroot/autobuild/run/instance-3/output/target/etc/sane.d" for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \ /bin/sh ../mkinstalldirs /home/buildroot/autobuild/run/instance-3/output/target/usr/share/sane/${dir} ; \ done test -z "/etc/sane.d/dll.d" || /bin/mkdir -p "/home/buildroot/autobuild/run/instance-3/output/target/etc/sane.d/dll.d" mkdir -p -- /home/buildroot/autobuild/run/instance-3/output/target/usr/share/sane/artec_eplus48u installing abaton.conf in /etc/sane.d/abaton.conf... mkdir -p -- /home/buildroot/autobuild/run/instance-3/output/target/usr/share/sane/gt68xx installing agfafocus.conf in /etc/sane.d/agfafocus.conf... installing apple.conf in /etc/sane.d/apple.conf... installing artec.conf in /etc/sane.d/artec.conf... mkdir -p -- /home/buildroot/autobuild/run/instance-3/output/target/usr/share/sane/snapscan installing artec_eplus48u.conf in /etc/sane.d/artec_eplus48u.conf... installing avision.conf in /etc/sane.d/avision.conf... mkdir -p -- /home/buildroot/autobuild/run/instance-3/output/target/usr/share/sane/epjitsu installing bh.conf in /etc/sane.d/bh.conf... installing canon.conf in /etc/sane.d/canon.conf... installing canon630u.conf in /etc/sane.d/canon630u.conf... installing canon_dr.conf in /etc/sane.d/canon_dr.conf... installing cardscan.conf in /etc/sane.d/cardscan.conf... installing coolscan.conf in /etc/sane.d/coolscan.conf... installing coolscan2.conf in /etc/sane.d/coolscan2.conf... installing coolscan3.conf in /etc/sane.d/coolscan3.conf... installing dc25.conf in /etc/sane.d/dc25.conf... installing dmc.conf in /etc/sane.d/dmc.conf... installing epjitsu.conf in /etc/sane.d/epjitsu.conf... installing epson.conf in /etc/sane.d/epson.conf... installing epson2.conf in /etc/sane.d/epson2.conf... installing fujitsu.conf in /etc/sane.d/fujitsu.conf... installing genesys.conf in /etc/sane.d/genesys.conf... installing gt68xx.conf in /etc/sane.d/gt68xx.conf... installing hp.conf in /etc/sane.d/hp.conf... installing hp3900.conf in /etc/sane.d/hp3900.conf... installing hp4200.conf in /etc/sane.d/hp4200.conf... installing hp5400.conf in /etc/sane.d/hp5400.conf... installing hs2p.conf in /etc/sane.d/hs2p.conf... installing ibm.conf in /etc/sane.d/ibm.conf... installing kodak.conf in /etc/sane.d/kodak.conf... installing kodakaio.conf in /etc/sane.d/kodakaio.conf... installing kvs1025.conf in /etc/sane.d/kvs1025.conf... installing leo.conf in /etc/sane.d/leo.conf... installing lexmark.conf in /etc/sane.d/lexmark.conf... installing ma1509.conf in /etc/sane.d/ma1509.conf... installing magicolor.conf in /etc/sane.d/magicolor.conf... installing matsushita.conf in /etc/sane.d/matsushita.conf... installing microtek.conf in /etc/sane.d/microtek.conf... installing microtek2.conf in /etc/sane.d/microtek2.conf... installing mustek.conf in /etc/sane.d/mustek.conf... installing mustek_usb.conf in /etc/sane.d/mustek_usb.conf... installing nec.conf in /etc/sane.d/nec.conf... installing net.conf in /etc/sane.d/net.conf... installing pie.conf in /etc/sane.d/pie.conf... installing pieusb.conf in /etc/sane.d/pieusb.conf... installing pixma.conf in /etc/sane.d/pixma.conf... installing plustek.conf in /etc/sane.d/plustek.conf... installing plustek_pp.conf in /etc/sane.d/plustek_pp.conf... installing ricoh.conf in /etc/sane.d/ricoh.conf... installing rts8891.conf in /etc/sane.d/rts8891.conf... installing s9036.conf in /etc/sane.d/s9036.conf... installing sceptre.conf in /etc/sane.d/sceptre.conf... installing sharp.conf in /etc/sane.d/sharp.conf... installing sm3840.conf in /etc/sane.d/sm3840.conf... installing snapscan.conf in /etc/sane.d/snapscan.conf... installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... make[5]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/backend' Making install in frontend make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/frontend' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/frontend' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/sbin' make[3]: Nothing to be done for `install-data-am'. /bin/sh ../libtool --mode=install /usr/bin/install -c scanimage '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c saned '/home/buildroot/autobuild/run/instance-3/output/target/usr/sbin' libtool: install: /usr/bin/install -c scanimage /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/scanimage libtool: install: /usr/bin/install -c saned /home/buildroot/autobuild/run/instance-3/output/target/usr/sbin/saned make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/frontend' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/frontend' Making install in tools make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' /usr/bin/make install-am make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/lib/pkgconfig' /usr/bin/install -c sane-config '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin' /usr/bin/install -c -m 644 sane-backends.pc '/home/buildroot/autobuild/run/instance-3/output/target/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c sane-find-scanner /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/umax_pp make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/tools' Making install in po make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/po' if test "sane-backends" = "gettext-tools"; then \ /bin/mkdir -p /home/buildroot/autobuild/run/instance-3/output/target/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/buildroot/autobuild/run/instance-3/output/target/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/buildroot/autobuild/run/instance-3/output/target/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/po' Making install in testsuite make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' Making install in sanei make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/sanei' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/sanei' Making install in tools make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/tools' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/tools' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/tools' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite/tools' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27/testsuite' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta '/home/buildroot/autobuild/run/instance-3/output/target/usr/share/doc/sane-backends' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/sane-backends-1.0.27' ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49.tar.gz: OK (sha256: d05d4e3ad3599fca7854109938aebd24bbab72ac7d69dd053260f735a36613f9) >>> ti-utils 06dbdb2727354b5f3ad7c723897f40051fddee49 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-3/dl/ti-utils/ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-3/output/build/ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49 -xf - >>> ti-utils 06dbdb2727354b5f3ad7c723897f40051fddee49 Patching >>> ti-utils 06dbdb2727354b5f3ad7c723897f40051fddee49 Configuring >>> ti-utils 06dbdb2727354b5f3ad7c723897f40051fddee49 Building PATH="/home/buildroot/autobuild/run/instance-3/output/host/bin:/home/buildroot/autobuild/run/instance-3/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j1 NFSROOT="/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot" CC="/home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 `/home/buildroot/autobuild/run/instance-3/output/host/bin/pkg-config --cflags libnl-genl-3.0`" LIBS="`/home/buildroot/autobuild/run/instance-3/output/host/bin/pkg-config --libs libnl-genl-3.0`" -C /home/buildroot/autobuild/run/instance-3/output/build/ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49 all make[1]: Entering directory `/home/buildroot/autobuild/run/instance-3/output/build/ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49' /home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -I/home/buildroot/autobuild/run/instance-3/output/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/include/libnl3 -O2 -Wall -DCONFIG_LIBNL20 -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/include -c -o nvs.o nvs.c /home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -I/home/buildroot/autobuild/run/instance-3/output/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/include/libnl3 -O2 -Wall -DCONFIG_LIBNL20 -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/include -c -o misc_cmds.o misc_cmds.c /home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -I/home/buildroot/autobuild/run/instance-3/output/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/include/libnl3 -O2 -Wall -DCONFIG_LIBNL20 -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/include -c -o calibrator.o calibrator.c /home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -I/home/buildroot/autobuild/run/instance-3/output/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/include/libnl3 -O2 -Wall -DCONFIG_LIBNL20 -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/include -c -o plt.o plt.c /home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -I/home/buildroot/autobuild/run/instance-3/output/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/include/libnl3 -O2 -Wall -DCONFIG_LIBNL20 -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include -I/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/include -c -o ini.o ini.c /home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -I/home/buildroot/autobuild/run/instance-3/output/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/include/libnl3 -L/home/buildroot/autobuild/run/instance-3/output/host/mipsel-buildroot-linux-uclibc/sysroot/lib nvs.o misc_cmds.o calibrator.o plt.o ini.o -L/home/buildroot/autobuild/run/instance-3/output/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/lib -lnl-genl-3 -lnl-3 -o calibrator make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output/build/ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49' >>> ti-utils 06dbdb2727354b5f3ad7c723897f40051fddee49 Installing to target /usr/bin/install -m 0755 -D /home/buildroot/autobuild/run/instance-3/output/build/ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49/calibrator /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/calibrator /usr/bin/install -m 0755 -D /home/buildroot/autobuild/run/instance-3/output/build/ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49/scripts/go.sh /home/buildroot/autobuild/run/instance-3/output/target/usr/share/ti-utils/scripts/go.sh cp -r /home/buildroot/autobuild/run/instance-3/output/build/ti-utils-06dbdb2727354b5f3ad7c723897f40051fddee49/ini_files /home/buildroot/autobuild/run/instance-3/output/target/usr/share/ti-utils >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/buildroot/autobuild/run/instance-3/output/build/packages-file-list.txt ./support/scripts/check-uniq-files -t staging /home/buildroot/autobuild/run/instance-3/output/build/packages-file-list-staging.txt Warning: staging file "./usr/lib32" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/mtab" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/resolv.conf" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] ./support/scripts/check-uniq-files -t host /home/buildroot/autobuild/run/instance-3/output/build/packages-file-list-host.txt /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/run/instance-3/output/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-3/output/target/etc/inittab if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-3/output/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-3/output/target/etc/shells; fi grep: ./.config: No such file or directory if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-3/output/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-3/output/target/etc/shells; fi grep: ./.config: No such file or directory mkdir -p /home/buildroot/autobuild/run/instance-3/output/host/etc/meson sed -e "s%@TARGET_CROSS@%/home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-%g" -e "s%@TARGET_ARCH@%mips%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%"little"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 `%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 `%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-3/output/host%g" package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output/host/etc/meson/cross-compilation.conf mkdir -p /home/buildroot/autobuild/run/instance-3/output/target/etc echo "buildroot" > /home/buildroot/autobuild/run/instance-3/output/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-3/output/target/etc/hosts mkdir -p /home/buildroot/autobuild/run/instance-3/output/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-3/output/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-3/output/target/etc/shadow rm -f /home/buildroot/autobuild/run/instance-3/output/target/bin/sh rm -f /home/buildroot/autobuild/run/instance-3/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/buildroot/autobuild/run/instance-3/output/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-3/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/run/instance-3/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-3/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-3/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/include /home/buildroot/autobuild/run/instance-3/output/target/usr/share/aclocal \ /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-3/output/target/usr/share/pkgconfig \ /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-3/output/target/usr/share/cmake find /home/buildroot/autobuild/run/instance-3/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/run/instance-3/output/target/lib/ /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/ /home/buildroot/autobuild/run/instance-3/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: `/home/buildroot/autobuild/run/instance-3/output/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/share/gdb rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/share/zsh rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/man /home/buildroot/autobuild/run/instance-3/output/target/usr/share/man rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/info /home/buildroot/autobuild/run/instance-3/output/target/usr/share/info rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/doc /home/buildroot/autobuild/run/instance-3/output/target/usr/share/doc rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/run/instance-3/output/target/usr/share 2>/dev/null || true find /home/buildroot/autobuild/run/instance-3/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/run/instance-3/output/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-3/output/host/bin/mipsel-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/run/instance-3/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/run/instance-3/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/run/instance-3/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.02.3-00048-gfab4d55"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2019.02.3"; \ echo "PRETTY_NAME=\"Buildroot 2019.02.3\"" \ ) > /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-3/output/target/etc >>> Sanitizing RPATH in target tree /home/buildroot/autobuild/run/instance-3/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/run/instance-3/output/target/usr make: Leaving directory `/home/buildroot/autobuild/run/instance-3/buildroot' make: Entering directory `/home/buildroot/autobuild/run/instance-3/buildroot' >>> Buildroot 2019.02.3-00048-gfab4d55 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> busybox 1.29.3 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> host-pkgconf 1.5.3 Collecting legal info ERROR: No hash found for COPYING >>> libtirpc 1.1.4 Collecting legal info COPYING: OK (sha256: 17cf6098f95bdbb269f0bbc68e76c88fe20487ca7ec53f454923ab4256ecd2e7) >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) ERROR: No hash found for libltdl/COPYING.LIB >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-nfs-utils 1.3.3 Collecting legal info ERROR: No hash found for COPYING >>> host-libtirpc 1.1.4 Collecting legal info COPYING: OK (sha256: 17cf6098f95bdbb269f0bbc68e76c88fe20487ca7ec53f454923ab4256ecd2e7) >>> cpuload v0.3 Collecting legal info ERROR: No hash found for COPYING >>> initscripts Collecting legal info >>> libbdplus 0.1.2 Collecting legal info COPYING: OK (sha256: 592987e8510228d546540b84a22444bde98e48d03078d3b2eefcd889bec5ce8c) >>> libgcrypt 1.8.4 Collecting legal info COPYING.LIB: OK (sha256: ca0061fc1381a3ab242310e4b3f56389f28e3d460eb2fd822ed7a21c6f030532) >>> libgpg-error 1.33 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> libnl 3.4.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-bison 3.0.4 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-gettext 0.19.8.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) ERROR: No hash found for gettext-runtime/intl/COPYING.LIB >>> host-libxml2 2.9.9 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> libpcap 1.9.0 Collecting legal info LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> lmbench 3.0-a9 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING-2 >>> mdadm 4.0 Collecting legal info ERROR: No hash found for COPYING >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> read-edid 3.0.2 Collecting legal info ERROR: No hash found for LICENSE >>> host-cmake 3.8.2 Collecting legal info ERROR: No hash found for Copyright.txt >>> sane-backends 1.0.27 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) >>> ti-utils 06dbdb2727354b5f3ad7c723897f40051fddee49 Collecting legal info ERROR: No hash found for COPYING WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/run/instance-3/output/legal-info make: Leaving directory `/home/buildroot/autobuild/run/instance-3/buildroot'