libtool: install: /usr/bin/install -c sg_inq /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/sgp_dd make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/src' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/src' Making install in doc make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/doc' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/doc' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 '/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/man/man8' make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/doc' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/doc' Making install in scripts make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/scripts' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/scripts' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin' make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/scripts' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/scripts' make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' make[1]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' >>> sg3_utils 1.44 Fixing libtool files for la in $(find /home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/test/autobuild/run/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/home/test/autobuild/run/instance-1/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/test/autobuild/run/instance-1/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/test/autobuild/run/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sg3_utils 1.44 Installing to target PATH="/home/test/autobuild/run/instance-1/output-1/host/bin:/home/test/autobuild/run/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/test/autobuild/run/instance-1/output-1/target install -C /home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/ make[1]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' Making install in include make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/include' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/include' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-1/output-1/target/usr/include/scsi' /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_pr2serr.h sg_unaligned.h sg_pt.h sg_pt_nvme.h sg_linux_inc.h sg_io_linux.h sg_pt_linux.h '/home/test/autobuild/run/instance-1/output-1/target/usr/include/scsi' make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/include' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/include' Making install in lib make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/lib' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/lib' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-1/output-1/target/usr/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/home/test/autobuild/run/instance-1/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2.so.2.0.0 /home/test/autobuild/run/instance-1/output-1/target/usr/lib/libsgutils2.so.2.0.0 libtool: install: (cd /home/test/autobuild/run/instance-1/output-1/target/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so.2 || { rm -f libsgutils2.so.2 && ln -s libsgutils2.so.2.0.0 libsgutils2.so.2; }; }) libtool: install: (cd /home/test/autobuild/run/instance-1/output-1/target/usr/lib && { ln -s -f libsgutils2.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/test/autobuild/run/instance-1/output-1/target/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/lib' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/lib' Making install in src make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/src' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/src' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-1/output-1/target/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/test/autobuild/run/instance-1/output-1/target/usr/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_lba_status /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sgp_dd make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/src' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/src' Making install in doc make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/doc' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/doc' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-1/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 '/home/test/autobuild/run/instance-1/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/test/autobuild/run/instance-1/output-1/target/usr/share/man/man8' make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/doc' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/doc' Making install in scripts make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/scripts' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/scripts' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-1/output-1/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/test/autobuild/run/instance-1/output-1/target/usr/bin' make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/scripts' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44/scripts' make[2]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' make[3]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' make[2]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' make[1]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/sg3_utils-1.44' for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/test/autobuild/run/instance-1/output-1/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/test/autobuild/run/instance-1/output-1/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /home/test/autobuild/run/instance-1/output-1/target/usr/bin/${prog}; done >>> vmtouch 1.3.1 Downloading --2019-10-21 16:24:36-- https://github.com/hoytech/vmtouch/archive/v1.3.1/vmtouch-1.3.1.tar.gz Resolving github.com (github.com)... 140.82.118.4 Connecting to github.com (github.com)|140.82.118.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/hoytech/vmtouch/tar.gz/v1.3.1 [following] --2019-10-21 16:24:36-- https://codeload.github.com/hoytech/vmtouch/tar.gz/v1.3.1 Resolving codeload.github.com (codeload.github.com)... 140.82.114.10 Connecting to codeload.github.com (codeload.github.com)|140.82.114.10|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: `/home/test/autobuild/run/instance-1/output-1/build/.vmtouch-1.3.1.tar.gz.XotO1V/output' 0K .......... ......... 236K=0.08s 2019-10-21 16:24:37 (236 KB/s) - `/home/test/autobuild/run/instance-1/output-1/build/.vmtouch-1.3.1.tar.gz.XotO1V/output' saved [20311] vmtouch-1.3.1.tar.gz: OK (sha256: d57b7b3ae1146c4516429ab7d6db6f2122401db814ddd9cdaad10980e9c8428c) >>> vmtouch 1.3.1 Extracting gzip -d -c /home/test/autobuild/run/instance-1/dl/vmtouch/vmtouch-1.3.1.tar.gz | /home/test/autobuild/run/instance-1/output-1/host/bin/tar --strip-components=1 -C /home/test/autobuild/run/instance-1/output-1/build/vmtouch-1.3.1 -xf - >>> vmtouch 1.3.1 Patching >>> vmtouch 1.3.1 Configuring >>> vmtouch 1.3.1 Building PATH="/home/test/autobuild/run/instance-1/output-1/host/bin:/home/test/autobuild/run/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-ar" AS="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-as" LD="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-ld" NM="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-nm" CC="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gcc" GCC="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gcc" CPP="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-cpp" CXX="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-g++" FC="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gfortran" F77="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gfortran" RANLIB="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-ranlib" READELF="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-readelf" STRIP="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-strip" OBJCOPY="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-objcopy" OBJDUMP="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/test/autobuild/run/instance-1/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/test/autobuild/run/instance-1/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/test/autobuild/run/instance-1/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/test/autobuild/run/instance-1/output-1/host/lib -Wl,-rpath,/home/test/autobuild/run/instance-1/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-as" DEFAULT_LINKER="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/test/autobuild/run/instance-1/output-1/host/bin/pkg-config" STAGING_DIR="/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j4 -C /home/test/autobuild/run/instance-1/output-1/build/vmtouch-1.3.1 make[1]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/vmtouch-1.3.1' /home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -O2 -g -std=c99 -o vmtouch vmtouch.c pod2man --section 8 --center "System Manager's Manual" --release " " vmtouch.pod > vmtouch.8 make[1]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/vmtouch-1.3.1' >>> vmtouch 1.3.1 Installing to target PATH="/home/test/autobuild/run/instance-1/output-1/host/bin:/home/test/autobuild/run/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-ar" AS="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-as" LD="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-ld" NM="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-nm" CC="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gcc" GCC="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gcc" CPP="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-cpp" CXX="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-g++" FC="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gfortran" F77="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-gfortran" RANLIB="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-ranlib" READELF="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-readelf" STRIP="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-strip" OBJCOPY="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-objcopy" OBJDUMP="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/test/autobuild/run/instance-1/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/test/autobuild/run/instance-1/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/test/autobuild/run/instance-1/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/test/autobuild/run/instance-1/output-1/host/lib -Wl,-rpath,/home/test/autobuild/run/instance-1/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-as" DEFAULT_LINKER="/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/test/autobuild/run/instance-1/output-1/host/bin/pkg-config" STAGING_DIR="/home/test/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j4 -C /home/test/autobuild/run/instance-1/output-1/build/vmtouch-1.3.1 install DESTDIR=/home/test/autobuild/run/instance-1/output-1/target PREFIX=/usr make[1]: Entering directory `/home/test/autobuild/run/instance-1/output-1/build/vmtouch-1.3.1' install -Dm 0755 vmtouch /home/test/autobuild/run/instance-1/output-1/target/usr/bin/vmtouch install -Dm 0644 vmtouch.8 /home/test/autobuild/run/instance-1/output-1/target/usr/share/man/man8/vmtouch.8 make[1]: Leaving directory `/home/test/autobuild/run/instance-1/output-1/build/vmtouch-1.3.1' >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/test/autobuild/run/instance-1/output-1/build/packages-file-list.txt Warning: target file "./usr/share/info/dir" is touched by more than one package: [u'readline', u'bash', u'gmp', u'mpfr'] ./support/scripts/check-uniq-files -t staging /home/test/autobuild/run/instance-1/output-1/build/packages-file-list-staging.txt Warning: staging file "./usr/share/info/dir" is touched by more than one package: [u'readline', u'gmp', u'mpfr'] Warning: staging file "./usr/lib32" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/resolv.conf" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/mtab" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] ./support/scripts/check-uniq-files -t host /home/test/autobuild/run/instance-1/output-1/build/packages-file-list-host.txt Warning: host file "./powerpc-buildroot-linux-uclibc/sysroot/usr/share/info/dir" is touched by more than one package: [u'host-cargo-bin', u'host-libtirpc', u'host-patchelf'] Warning: host file "./share/info/dir" is touched by more than one package: [u'host-tar', u'host-m4', u'host-bison', u'host-libtool', u'host-autoconf', u'host-automake'] grep -qsE '^/bin/bash$' /home/test/autobuild/run/instance-1/output-1/target/etc/shells || echo "/bin/bash" >> /home/test/autobuild/run/instance-1/output-1/target/etc/shells mkdir -p /home/test/autobuild/run/instance-1/output-1/host/etc/meson sed -e "s%@TARGET_CROSS@%/home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-%g" -e "s%@TARGET_ARCH@%ppc%g" -e "s%@TARGET_CPU@%603e%g" -e "s%@TARGET_ENDIAN@%"big"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os `@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os `@PKG_TARGET_CFLAGS@%g" -e "s%@HOST_DIR@%/home/test/autobuild/run/instance-1/output-1/host%g" package/meson//cross-compilation.conf.in > /home/test/autobuild/run/instance-1/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@PKG_TARGET_CFLAGS@%%g" -e "s%@PKG_TARGET_LDFLAGS@%%g" -e "s%@PKG_TARGET_CXXFLAGS@%%g" /home/test/autobuild/run/instance-1/output-1/host/etc/meson/cross-compilation.conf.in > /home/test/autobuild/run/instance-1/output-1/host/etc/meson/cross-compilation.conf mkdir -p /home/test/autobuild/run/instance-1/output-1/target/etc echo "buildroot" > /home/test/autobuild/run/instance-1/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/test/autobuild/run/instance-1/output-1/target/etc/hosts mkdir -p /home/test/autobuild/run/instance-1/output-1/target/etc echo "Welcome to Buildroot" > /home/test/autobuild/run/instance-1/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/test/autobuild/run/instance-1/output-1/target/etc/shadow rm -f /home/test/autobuild/run/instance-1/output-1/target/bin/sh rm -f /home/test/autobuild/run/instance-1/output-1/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/test/autobuild/run/instance-1/output-1/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/test/autobuild/run/instance-1/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/test/autobuild/run/instance-1/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/test/autobuild/run/instance-1/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/test/autobuild/run/instance-1/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/test/autobuild/run/instance-1/output-1/target/usr/include /home/test/autobuild/run/instance-1/output-1/target/usr/share/aclocal \ /home/test/autobuild/run/instance-1/output-1/target/usr/lib/pkgconfig /home/test/autobuild/run/instance-1/output-1/target/usr/share/pkgconfig \ /home/test/autobuild/run/instance-1/output-1/target/usr/lib/cmake /home/test/autobuild/run/instance-1/output-1/target/usr/share/cmake find /home/test/autobuild/run/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/test/autobuild/run/instance-1/output-1/target/lib/ /home/test/autobuild/run/instance-1/output-1/target/usr/lib/ /home/test/autobuild/run/instance-1/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: `/home/test/autobuild/run/instance-1/output-1/target/usr/libexec/': No such file or directory rm -rf /home/test/autobuild/run/instance-1/output-1/target/usr/share/gdb rm -rf /home/test/autobuild/run/instance-1/output-1/target/usr/share/zsh rm -rf /home/test/autobuild/run/instance-1/output-1/target/usr/man /home/test/autobuild/run/instance-1/output-1/target/usr/share/man rm -rf /home/test/autobuild/run/instance-1/output-1/target/usr/info /home/test/autobuild/run/instance-1/output-1/target/usr/share/info rm -rf /home/test/autobuild/run/instance-1/output-1/target/usr/doc /home/test/autobuild/run/instance-1/output-1/target/usr/share/doc rm -rf /home/test/autobuild/run/instance-1/output-1/target/usr/share/gtk-doc rmdir /home/test/autobuild/run/instance-1/output-1/target/usr/share 2>/dev/null || true find /home/test/autobuild/run/instance-1/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/test/autobuild/run/instance-1/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/test/autobuild/run/instance-1/output-1/host/bin/powerpc-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/test/autobuild/run/instance-1/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/test/autobuild/run/instance-1/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/test/autobuild/run/instance-1/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.11-git-02322-g5e96867"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2019.11-git"; \ echo "PRETTY_NAME=\"Buildroot 2019.11-git\"" \ ) > /home/test/autobuild/run/instance-1/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/test/autobuild/run/instance-1/output-1/target/etc >>> Sanitizing RPATH in target tree /home/test/autobuild/run/instance-1/buildroot/support/scripts/fix-rpath target touch /home/test/autobuild/run/instance-1/output-1/target/usr make: Leaving directory `/home/test/autobuild/run/instance-1/buildroot' make: Entering directory `/home/test/autobuild/run/instance-1/buildroot' >>> Buildroot 2019.11-git-02322-g5e96867 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> host-tar 1.29 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> acpica 20190703 Collecting legal info source/include/acpi.h: OK (sha256: 65464cea6ee2f7a5d38e2b5f1050a4b39a15358a09b8e36119416d4e2c5031b8) >>> host-bison 3.4.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gettext Collecting legal info >>> host-gettext-tiny c6dcdcdef801127549d3906d153c061880d25a73 Collecting legal info LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34) extra/COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> aubio 0.4.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-python 2.7.17 Collecting legal info LICENSE: OK (sha256: a77d71d6be6f9032e6b6e5d2cf6da68f9eeab9036edfbc043633c8979cd5e82c) >>> host-expat 2.2.9 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> libsamplerate 0.1.9 Collecting legal info COPYING: OK (sha256: 2c1f76ce2effdddb425018405d5690c0b1ab4e6976e35296b0a6db65c5e1a55d) >>> bash 4.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 86106f0da1cf5ccfa0f0651665dd1b4515e8edad1c7972780155770548b317d9) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 86106f0da1cf5ccfa0f0651665dd1b4515e8edad1c7972780155770548b317d9) >>> readline 8.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> batctl 2019.3 Collecting legal info LICENSES/preferred/GPL-2.0: OK (sha256: cecbf53d1148e13256ac29f8b900655b7fc8dc12d59939a95bc2323ea1747025) LICENSES/preferred/MIT: OK (sha256: 323c587d0ccf10e376f8bf9a7f31fb4ca6078105194b42e0b1e0ee2bc9bde71f) >>> libnl 3.5.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> bc 1.07.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> bitstream-vera 1.10 Collecting legal info ERROR: No hash found for COPYRIGHT.TXT >>> bitstream 1.4 Collecting legal info COPYING: OK (sha256: 9644a812f9a8377a59acb7092a36ce8882a39743425d9171a8fb84637e2f6e04) >>> host-cargo 0.26.0 Collecting legal info LICENSE-APACHE: OK (sha256: a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2) LICENSE-MIT: OK (sha256: 23f18e03dc49df91622fe2a76176497404e46ced8a715d9d2b67a7446571cca3) >>> host-cargo-bin 0.33.0 Collecting legal info LICENSE-APACHE: OK (sha256: a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2) LICENSE-MIT: OK (sha256: 23f18e03dc49df91622fe2a76176497404e46ced8a715d9d2b67a7446571cca3) >>> host-cmake 3.9.6 Collecting legal info Copyright.txt: OK (sha256: 9d8604f7afc5564ceb9705ba121f5fba2782ce18d92902f3c6ed338228372170) >>> host-libcurl 7.66.0 Collecting legal info COPYING: OK (sha256: 8c8824f50e73a021f5dde1fccbf69685939247399a33a32abab1fa448c9ddabb) >>> host-openssl Collecting legal info >>> host-libopenssl 1.1.1d Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> host-libhttpparser 2.9.2 Collecting legal info LICENSE-MIT: OK (sha256: 79e6ba8b687cb54786207342b9b6fcee0ac10218453ed9009b84d949b2233cc0) >>> host-libssh2 1.9.0 Collecting legal info COPYING: OK (sha256: e15ed284a15e80115467d6d7f030f0d89d8fabbecd78fb6e0f861f0cfc128fd9) >>> host-rustc Collecting legal info >>> host-rust-bin 1.33.0 Collecting legal info LICENSE-APACHE: OK (sha256: a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2) LICENSE-MIT: OK (sha256: 23f18e03dc49df91622fe2a76176497404e46ced8a715d9d2b67a7446571cca3) >>> ccid 1.4.30 Collecting legal info COPYING: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> libusb 1.0.23 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> pcsc-lite 1.8.25 Collecting legal info COPYING: OK (sha256: 40d4358bb8dc8d30f5365ae6d999b6f820bbc051b292912482f2e4d0ebd837e1) GPL-3.0.txt: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> checkpolicy 2.9 Collecting legal info COPYING: OK (sha256: 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994) >>> flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> libselinux 2.9 Collecting legal info LICENSE: OK (sha256: 86657b4c0fe868d7cbd977cb04c63b6c667e08fa51595a7bc846ad4bed8fc364) >>> libsepol 2.9 Collecting legal info COPYING: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> musl-fts 1.2.7 Collecting legal info COPYING: OK (sha256: 55af87e4017668f54467a3380e7ebbac5e672d8c763bfe95e6fc882a6fdc4046) >>> pcre 8.43 Collecting legal info LICENCE: OK (sha256: a5fce68baf797e0918463a4437ef75984c41118f43850ddeabda1b5a90154309) >>> daq 2.0.6 Collecting legal info COPYING: OK (sha256: 07f28289c09fd9eb5a6ff7bc710ff40363601b1bbc6f3637d8ed412150e90819) >>> dehydrated 0.6.5 Collecting legal info LICENSE: OK (sha256: b4583b7dd07e3e2a08906de38e7e329d41f921ed9dcb6310b3886e013a6b8723) >>> eigen 3.3.7 Collecting legal info COPYING.MPL2: OK (sha256: fab3dd6bdab226f1c08630b1dd917e11fcb4ec5e1e020e2c16f83a0a13863e85) COPYING.BSD: OK (sha256: 4f877e5ae4672568ef82cfd0023e2cef4a7cf55d867ab249efc9569a7eb9e5b1) COPYING.LGPL: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) COPYING.README: OK (sha256: c83230b770f17ef1386ea1fd3681271dd98aa93646bdbfb5bff3a1b7050fff9d) >>> empty 0.6.20b Collecting legal info ERROR: No hash found for COPYRIGHT >>> ethtool 5.3 Collecting legal info LICENSE: OK (sha256: 5d632934396f90c82dfebe3c9512648bbb6333b406113d0cd331b0e0aa2d34a1) COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> gmp 6.1.2 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> graphite2 1.3.10 Collecting legal info ERROR: No hash found for LICENSE >>> iostat 2.2 Collecting legal info LICENSE: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libcurl 7.66.0 Collecting legal info COPYING: OK (sha256: 8c8824f50e73a021f5dde1fccbf69685939247399a33a32abab1fa448c9ddabb) >>> openssl Collecting legal info >>> libopenssl 1.1.1d Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> libdvdcss 1.4.2 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> libdvdread 6.0.2 Collecting legal info COPYING: OK (sha256: d6cb0e9e560f51085556949a84af12b79a00f10ab8b66c752537faf7cd665572) >>> libid3tag 0.15.1b Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) COPYRIGHT: OK (sha256: 7f12ad28dc075763e91b91bfa60fad04062380011ddad8f6bac21dd7b1f44367) >>> liblo 0.30 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> libmspack 0.10.1alpha Collecting legal info COPYING.LIB: OK (sha256: a190dc9c8043755d90f8b0a75fa66b9e42d4af4c980bf5ddc633f0124db3cee7) >>> libtirpc 1.1.4 Collecting legal info COPYING: OK (sha256: 17cf6098f95bdbb269f0bbc68e76c88fe20487ca7ec53f454923ab4256ecd2e7) >>> host-nfs-utils 1.3.4 Collecting legal info COPYING: OK (sha256: 576540abf5e95029ad4ad90e32071385a5e95b2c30708c706116f3eb87b9a3de) >>> host-libtirpc 1.1.4 Collecting legal info COPYING: OK (sha256: 17cf6098f95bdbb269f0bbc68e76c88fe20487ca7ec53f454923ab4256ecd2e7) >>> linux-firmware 20190717 Collecting legal info LICENCE.qla2xxx: OK (sha256: 4071a11d878dbc0ac6d9e71203d03b151638f9d7a8bc47a54c3cb964100d5822) WHENCE: OK (sha256: 440c2ed4fba90edb52847f1550ff33fbfb36f61688eecced84c22dfc247f31e9) >>> host-lpc3250loader 1.0 Collecting legal info ERROR: No hash found for LPC3250loader.py >>> mpfr 4.0.2 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> mtdev 1.1.4 Collecting legal info ERROR: No hash found for COPYING >>> mtdev2tuio e1e7378d86abe751158e743586133022f32fa4d1 Collecting legal info ERROR: No hash found for COPYING >>> openjpeg 2.3.1 Collecting legal info LICENSE: OK (sha256: a6af136f3e15038a666b61f376612a07d9a4e48cb7c01adbf3e33b3f14ab49b6) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> sg3_utils 1.44 Collecting legal info COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc) BSD_LICENSE: OK (sha256: 31f6d59679e0fb21c9358f22484e6e3c53e20ef08c0950fd38a4a867cb55edc9) >>> vmtouch 1.3.1 Collecting legal info LICENSE: OK (sha256: 13258709ed29c17394e0a3ba8c8b9360af35b85231db514f11a0ba385cecd08e) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) Legal info produced in /home/test/autobuild/run/instance-1/output-1/legal-info make: Leaving directory `/home/test/autobuild/run/instance-1/buildroot'